Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG Laodpfxjy Akpue Afwof type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: excellent (used), Year of construction: 2008, operating hours: 49,673 h, functionality: limited functionality, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 154 cm³, KRAUSS MAFFEI KM 80-380 EX Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control unit: MC5 Year of manufacture: 2008 Operating hours: 49,673 h Technical Data - Clamping Unit Clamping force: 800 kN Tie bar spacing (H x V): 520 x 420 mm Platen size (H x V): 640 x 740 mm Lodpfx Afjzgt Eqswoaf Minimum mold height: 300 mm Maximum platen distance: 790 mm Ejector stroke: 100 mm Ejector force: 22 kN Centering diameter moving platen: 125 mm Centering diameter fixed platen: 125 mm Technical Data - Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 2,429 bar Screw L/D ratio: 23 l/d Screw speed: 477 min⁻¹ Specific injection rate: 289 g/s (GPPS) Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 5.35 m x 1.7 m x 2 m Total weight: 6,500 kg Equipment Display language: German CEE outlet 16A 1x air valve Machine with material hopper Machine with water battery Levelling elements EUROMAP 67 handling interface USB interface Schuko socket 10A 24x tool heating circuits

Condition: used, Year of construction: 2008, operating hours: 10,113 h, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 156 cm³, injection pressure: 2,429 bar, total length: 6,000 mm, total width: 1,700 mm, total height: 2,190 mm, clamping force: 1200 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 780 x 735 mm min. mould height: 200 mm max. mould height: 450 mm Ledpfx Aszgt E Rsfwoaf max. open daylight: 850 mm opening stroke: 400 mm screw diameter: 35 mm swept volume: 156 ccm injection pressure: 2429 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A measures of machine l x w x h: 6m x 1.7m x 2.19m total weight: 9700KG

Condition: like new (used), Year of construction: 2019, operating hours: 950 h, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, clearance between the columns: 710 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, mold height (min.): 300 mm, opening stroke: 650 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 10,500 kg, Injection molding machine for processing PVC-H. Conversion for processing PS/PP/PA etc. can be offered upon request! warehouse no.: 503679 manufacturer: Wittmann Battenfeld type: Smart Power XL 180-1330 controller: UNILOG B8 year of construction: 2019 operation hours: 950 h clamping force: 1800 kN distance between tie-bars h x v: 710 x 660 mm size of mould plates h x v: 950 x 955 mm min. mould height: 300 mm max. open daylight: 950 mm opening stroke: 650 mm screw diameter: 55 mm swept volume: 653 ccm injection pressure: 2041 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 1x Lsdpfxezgt Ifs Afweaf machine with material hopper PVC-U injetion unit Schuko-socket 10A measures of machine l x w x h: 5.5m x 1.8m x 2.3m total weight: 10500KG

Condition: used, Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 5,655 cm³, injection pressure: 1,632 bar, total length: 11,600 mm, total width: 2,900 mm, total height: 2,500 mm, overall weight: 76,500 kg, clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar equipment included screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 Laodpfx Aozgt Rysfwsf interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: good (used), Year of construction: 2013, colortronic Colorblend S metering device Stock No.: 503625 Machine type/ Device type: Metering device Manufacturer: colortronic Type: Colorblend S Year of manufacture: 2013 Volumetric metering and mixing device with a stainless steel insert in the mixing neck. The Colorblend S is mounted directly onto the inlet flange of the processing machine. This means it requires very little space. A stainless steel insert in the mixing neck divides the main component into two material streams. These flow together with the additives before entering the machine, forming a homogeneous mixture. Throughput: 0.7 - 12 kg/h Lodpfx Afszi U Hnjwjaf Voltage: 230 V / 50 Hz

Condition: good (used), Year of construction: 2017, MOTAN Gravicolor 30 GRAVInet Stock No.: 503694 Lsdpfx Ajzrg Euefwoaf Machine Type/Equipment Type: Dosing unit Manufacturer: MOTAN Type: Gravicolor 30 GRAVInet Year of Manufacture: 2017 GRAVICOLOR precisely mixes and doses up to six materials, ensuring the highest level of recipe accuracy. These modular, gravimetric dosing and mixing units are specifically designed for injection molding, blow molding, and extrusion applications. Regardless of recipes, materials, or the application environment, IntelliBlend continuously analyzes all process data and, through self-optimization, always achieves the best possible operating point. The highest level of recipe adherence results in the best and most consistent product quality.

Condition: good (used), Year of construction: 2008, operating hours: 59,934 h, screw diameter: 45 mm, displacement volume: 318 cm³, ENGEL Victory 650-120 Tech Stock No.: 503240 Manufacturer: ENGEL Model: VICTORY 650-120 Tech Control: EC200 A02 Year of manufacture: 2008 Operating hours: 59,934 h Technical Data Clamping Unit Clamping force: 1200 kN Platen size (H x V): 740 x 680 mm Minimum mold height: 300 mm Maximum daylight: 800 mm Opening stroke: 507 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Tool weight: 825 kg Technical Data Injection Unit Screw diameter: 45 mm Shot volume: 318 ccm Injection pressure: 1525 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Ljdpfx Afjytfn Ejwjaf Screw speed: 290 min⁻¹ Free shot weight (PS): 220 g/s Number of heating zones: 5 Nozzle stroke: 300 mm Dimensions & Weight Machine dimensions (L x W x H): 4.86m x 1.5m x 2.1m Total weight: 7,600 kg Equipment - Display language: German - CEE socket 16A - Hydraulic core pull, 2x - Air valve, 2x - Machine with water battery - Machine without material hopper - Levelling elements - Schuko socket 10A - Tool heating, 8x

Year of construction: 2007, condition: good (used), functionality: fully functional, Kasper REGELSTAR Combi C6 Stock no.: 503594 Machine/Device type: Temperature control unit Manufacturer: Kasper Model: REGELSTAR Combi Year of manufacture: 2007 Total connected load: 18 A Heating capacity: 9 kW Ljdpfx Afewxvawewoaf Cooling capacity: 36 kW/80°C Pump capacity: 60 l/min Maximum pump pressure: 4 bar Max. temperature: 150°C (oil) Max. temperature: 95°C (water) Circulating medium: water & oil

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock No.: 503634 Machine/Device type: Temperature control unit Lajdpfxext N D Ne Afwsf Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503637 Lsdpfsxt N Hwsx Afweaf Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160°C Heating capacity: 9 kW Circulating medium: Water/water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature control unit plasma plasTemp Primus 90 Laodpfx Aoxt Rddjfwof Stock no.: 503644 Machine type / Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp temperature control unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW, via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K, pressure difference in the cooling water circuit min. 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Self-optimizing microprocessor controller, SBC • Digital display for setpoint and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm indicator • Hour meter • Heating control via solid-state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Draining for tool change • Manual filling • Dirt filter • Unit mounted on rubberized castors • Connections: Mold hose nozzle G 1/2” (14 mm), cooling water hose nozzle G 3/8” (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Lasdpsx A Svtefx Afwjf Stock no.: 503636 Machine type/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements Laodpex Eifksfx Afwjf and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Laedpoyglvpsfx Afwef Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Lodpfx Aoyglw Tjfwoaf Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included: screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor Laedpfx Afjyvz Izowef machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG

Condition: excellent (used), Year of construction: 2012, operating hours: 37,830 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, Equipment: documentation/manual, Inventory No.: 503409 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control: Selogica Year of manufacture: 2012 Operating hours: 37830 h Technical data, clamping unit side Clamping force: 2500 kN Tie bar distance h x v: 630 x 630 mm Platen size h x v: 900 x 900 mm Minimum mounting height: 300 mm Maximum mounting height: 700 mm Maximum platen spacing: 1300 mm Opening stroke: 600 mm Ejector stroke: 225 mm Ejector force: 90 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Technical data, injection molding side Screw diameter: 50 mm Displacement volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 min Screw torque: 1000 N Free injection flow rate: 300 g/s PS Number of heating zones: 8 Nozzle distance: 400 mm Dimensions & Weight Machine dimensions L x W x H: 6.4 m x 1.95 m x 2.21 m Total weight: 12140 kg Equipment Lasdszfi Tzepfx Afwof Screen text in German Screen text in English CEE socket 16A Compact Flash interface for data set storage Hydraulic core pull 1x Air valve 2x Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface OPC interface Schuko socket 10A Selector unit Tool heating 12x

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Platen size (h x v): 1050 x 980 mm Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Leveling elements Handling Data Manufacturer: ENGEL Control: ER-HLI 81 Lodpfxezgt Irj Afwoaf Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, injection pressure: 1,640 bar, Stock No.: 503583 Manufacturer: ENGEL Type: ES 16050-800 DUO Controller: CC 200 Year of manufacture: 2007 Operating hours: 91708 h Technical Data, Clamping Unit Clamping force: 8000 kN Tie bar distance h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Minimum mounting height: 500 mm Lodpfx Afjzgt Rtoweaf Maximum mounting height: 1100 mm Maximum platen distance: 2100 mm Opening stroke: 1600 mm Ejector stroke: 300 mm Ejector force: 180 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 21600 kg Technical Data, Injection Unit Screw diameter: 135 mm Injection volume: 8870 ccm Injection pressure: 1640 bar Screw length: 22 l/d Screw stroke: 620 mm Screw speed: 100 rpm Screw torque: 14000 N Free injection flow rate: 1245 g/s PS Number of heating zones: 7 Nozzle stroke: 950 mm Dimensions & Weight Machine dimensions L x W x H: 11.81 m x 3.2 m x 2.9 m Total weight: 56000 KG Equipment Screen text German Screen text English CEE socket 16A CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Machine including handling system Machine including safety enclosure Machine with water manifold Interface EUROMAP 12 Interface for handling system USB interface Tool heating 16x Technical Data, Handling System Machine type: Linear Manufacturer: ENGEL Controller: ERC 64/1-F Year of manufacture: 2007 Handling system weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm

Condition: used, Year of construction: 2010, functionality: fully functional, The round table with 6 segments is for sale. Lodpfxozvux Rs Afwjaf

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Digicolor is for sale. This granulate dryer operates according to the principle of dry air drying. 40 liters Small footprint Simple adjustment and operation Constant dew point of the dry air Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air thanks to adsorption rotor technology Lasdpsywh E Asfx Afwef Anti-stress function, SmartMode, prevents over-drying of the plastic granulate.

Year of construction: 2020, condition: like new (used), functionality: fully functional, The Regloplas P140XS temperature control unit is for sale. Medium: Water Heating capacity: 3 kW Cooling capacity: 38 kW Maximum flow rate: 11 l/min Weight: 25 kg Ljdpfx Aszvur Dsfwoaf Dimensions (W/H/D): 143/420/520 mm

Condition: used, Year of construction: 2006, functionality: fully functional, The desiccant air dryer, model Card 40 S, from Ferratech is for sale. Heating capacity: 1.1 kW Lasdezvulqjpfx Afwof Volume: 40 liters

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Lajdpozk D Dxefx Afwof Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.