Condition: used, Manufacturer : SISE Model : 95E27 DC95 Type: Hot water heat controller Heating capacity: 28.1 kW Cooling type: 60 kW plate heat exchanger Recirculation: immersed pump Bsdpfx Anjy Ufito Nown Maximum temperature: water 95°C Process inlet and outlet connection: 1¼" Technical file available

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, number of previous owners: 2, Equipment: cooling unit, type plate available, The twin-screw extruder has been used little. New screw shafts and a water cooling system have been overhauled. The control cabinet is present. The calender has a 1.75 mm x 2-hole strand die. Bwjdpfx Anjv I R Tro Nen

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 50.11.547, clamping force: 1,472 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, ejector force: 4,000 N, opening stroke: 460 mm, total length: 6,000 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 6,600 kg, number of injections: 1, power: 64 kW (87.02 HP), input voltage: 400 V, For sale is a hydraulic injection molding machine, NPM Multipower 150, manufactured in 2011. The machine is being replaced by a larger unit due to a capacity expansion. During the dismantling process, the control panel (HMI) was removed and sent in for repair. Since the machine is no longer needed, we would prefer not to invest in the cost of a repair. For this reason, the machine cannot currently be put into operation or its functionality tested. The operating hours also cannot be read at this time. The machine was mainly used in our facility for the production of plastic caps as well as sample and prototype parts. Accordingly, it was rarely operated in multi-shift mode or under high load. Bwodpfx Ansza D Idj Non The removed control panel will be provided with the machine. We are not aware of the current repair status. Upon request, we will gladly provide contact information for the responsible service partner so that a potential buyer can inquire directly about repair options. The machine is explicitly sold as an untested used machine without any functional guarantee. It is particularly suitable for specialized companies with their own maintenance department, for retrofit projects, or for obtaining spare parts. Inspections are possible and expressly encouraged, by prior arrangement.

Condition: used, Year of construction: 2000, Arburg injection moulding machine in good condition. Can be inspected in operation upon appointment. Availability: 06/2026 Clamping force: 2500 kN Distance between tie rods: 630 x 630 mm Shot gewicht: 826 gr Bsdpfjy Sxlcjx An Njwn Injection pressure: 1470 bar Screw diameter: 70 mm

Condition: used, Year of construction: 2020, carrying capacity 500 kg weight 930 kg dimensions 1250 x 2590 x 1500 mm Operating instructions available technical data see attached PDF Bwsdpfx Ansvg R U Te Non

Year of construction: 2026, condition: new, Slow-speed, side-by-side granulator Rotor diameter (mm) 180 Rotor width (mm) 180 Rotor speed (rpm) 150 Drive (kW) 3 Number of rotor blades 18 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 140 The slow-speed side-by-side granulators of the GSL series are primarily used in injection molding and blow molding for the inline reduction of sprues and defective parts. Various hopper and extraction systems allow the machines to be flexibly integrated into existing installations. GSL 180 For the comminution of sprues from injection molding and blow molding Highlights of the GSL series: Low noise thanks to the low rotor speed, angled cut, and soundproof hopper in a multi-layer sandwich design. Powerful and efficient drive thanks to a brand-name gearbox. Bwedpfx Ajqmik Ion Nen Easy maintenance, cleaning, and knife replacement. The slow-running, stand-alone granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm to 430 mm. The rotor consists of individual discs directly connected to the spur gear unit via an oversized drive shaft. This enables efficient and low-maintenance power transmission. The material to be crushed can be fed by hand, by conveyor belt, or by robot via a generously dimensioned, soundproof hopper in a sandwich design. The granulator is mounted on a low base frame on casters as standard. The mill is emptied via an extraction tray inserted beneath the screen with a pipe connection for a suction conveyor. Applications The slow-running, stand-alone mills of the GSL 180 series were specifically developed for the size reduction of sprues from injection molding and blow molding. Easy accessibility allows for quick color and material changes. The low rotor speed also allows for the processing of both soft and hard materials, ensuring good material quality with low dust content.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 250 mm, rotor width: 450 mm, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start-up and end-piece sections In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling, and energy efficiency. These compact granulators are equipped with full sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, or 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside of the machine to reduce downtime during maintenance. The strongly tangential, curved rear wall of the cutting chamber combined with the aggressive, open rotor design guarantees reliable material intake and minimizes the risk of blockages. The compact granulators are designed for use in blow molding operations. They are suitable for recycling large-volume parts such as bottles, canisters, and crates. Thanks to the low feed height, the machines can easily be fed by hand or via a small conveyor belt. Low noise emissions and minimal footprint make this granulator the perfect solution for inline size reduction. 98T8Mrx Optional rear wall with elevated stator knife M version: The feed method featuring an elevated stator knife is more suitable for thicker-walled and more compact parts, such as injection-molded components, profiles, and sheets. The cutting geometry and reduced rotor aggressiveness deliver high-quality regrind, regardless of the material type or form, such as injection-molded parts, profiles, or plates. Control system and switch cabinet: The integrated control system and operator console not only comply with all current safety regulations, but can also be customized to address specific requirements. In addition, peripheral devices such as infeed conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine’s control system. For enhanced efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can start or stop the system automatically based on the operating status of upstream machinery. Standard configuration with blower, power consumption 0.37 kW, and 400-type cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Approx. weight (kg): 700 Feed opening (mm): 380 x 450 Bodpfx Anet Aagao Njwn Feed opening option, M Version (mm): 295 x 450

Year of construction: 2026, condition: new, functionality: fully functional, working width: 400 mm, drive type: Direktgetriebe, funnel diameter: 400 mm, nominal power: 7.5 kW (10.20 HP), number of blades: 33, rotational speed (max.): 150 rpm, rotor diameter: 300 mm, rotor width: 400 mm, sieve perforation: 6 mm, Direct driven staggered rotor Special knife design makes adjustment unnecessary Easy access for maintenance and cleaning Gegqxgljx Slow rotor speed creates less noise and dust Easily customizable to suit different applications Bwedpsn Hqxfofx An Non Rotor diameter (mm) 300 Rotor width (mm) 400 Rotor speed (rpm) 150 Drive capacity (kW) 7.5 Rotor knives (pcs) 33 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 550

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: TH GST 4060 2411 001, overall weight: 1,650 kg, rotor diameter: 400 mm, number of blades: 6, rotor width: 600 mm, power: 22 kW (29.91 HP), The compact inline granulators of the GST series are designed for use in injection molding and blow molding operations. They are suitable for recycling, for example, bulky parts such as bottles, canisters, crates, sprues, and injection-molded parts. Thanks to their low feed height, the machines can be easily loaded by hand or with a small conveyor belt. Low noise emissions and minimal space requirements make the GST series the perfect solution for inline size reduction. All GST series machines feature a compact, sound-insulated machine housing and a noise-dampened feed hopper. The feed hopper can be opened and closed via a gas pressure damper. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths from 300 up to 1000 mm. Smaller machines come with an open F-rotor, while the larger models are equipped with the heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents blockages. Thanks to the modular construction of the granulator, it can be easily upgraded with additional options such as replaceable wear plates. As with all ZERMA granulators, rotor and stator knives can be adjusted outside of the machine, significantly reducing downtime during maintenance. An adjustment gauge is included in the standard delivery. The control cabinet is mounted externally on the noise protection enclosure, and all wiring is routed internally within the unit. Technical Data: Rotor diameter (mm): 400 Rotor width (mm): 600 Drive (kW): 22 Bwedpjy Dgpmofx An Nsn Rotor knives (rows): 3 x 2 Stator knives (rows): 2 Screen perforation (mm): > 8 Cutting chamber (mm x mm): 400 x 600 Weight (approx. kg): 2000

Condition: new, Year of construction: 2026, functionality: fully functional, Slow-running mill for storage Rotor diameter (mm) 180 Rotor width (mm) 300 Rotor speed (rpm) 150 Drive (kW) 4 Number of rotor blades 30 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 180 The slow-running mills of the GSL 180 series have a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and a high-quality product. The special rotor blades can be resharpened several times, eliminating the need for complex adjustment work. The mills are fed via a noise-reducing sandwich-type hopper. Depending on the task, the machines can be equipped with various hopper variants. Low and high base frames are available as options. The ground material is either vacuumed or filled into bags or a plastic container. Bwsdsyzrfuepfx An Nsn Good accessibility for simple and quick maintenance work is ensured by the Quick Snap locking system.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7826-1082, Plastic Injection Moulding Machine | DEMAG Ergotech Extra 35-80 (350 - 80) Clamping force [kN]: 350 Number of components: 1 Clamping plate width [mm]: 390 Clamping plate height [mm]: 390 Clear tie bar spacing horizontal [mm]: 280 Clear tie bar spacing vertical [mm]: 280 Centric ring diameter [mm]: 110 Min. mould installation height [mm]: 180 Max. mould installation height [mm]: 350 Max. opening stroke [mm]: 350 Max. ejector stroke [mm]: 100 Thread [M]: 16 Max. mould weight [kg]: 310 Max. mould weight moving platen [kg]: 150 Screw diameter [mm]: EE1:18 Max. shot weight [g] PS: EE1:20 Injection unit orientation: EE1: horizontal Equipment: 2-core pull, without robot Inspection possible any time by appointment. Bwsdpfxjygh Rve An Non Free loaded on truck (Butzbach). #Tags: DEMAG | Extra35 | Extra3580

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Bsdpfeygib Nox An Nown Maximum shot weight [g] PS: EE1: 139 Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S Bwodpfx Anjyf Ha Hs Nen

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Bwodoygiafjpfx An Non Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8040-0008, Plastic Injection Moulding Machine | Demag Ergotech - Systec 280/630-840 (2800-840) Clamping Force [kN]: 2,800 Number of components: 1 Clamping platen width [mm]: 950 Clamping platen height [mm]: 950 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centering ring diameter [mm]: 160 Minimum mould height [mm]: 330 Maximum mould height [mm]: 710 Bwjdpjygidwsfx An Njn Maximum daylight opening [mm]: 675 Maximum ejector stroke [mm]: 200 Thread [M]: 20 Maximum mould weight [kg]: 3,700 Maximum mould weight, moving platen [kg]: 2,500 Screw diameter [mm]: EE1: 45 Max. shot weight [g] PS: EE1: 320 Injection unit arrangement: EE1: horizontal Equipment: 2-core pull, 6-fold cascade, with robot Inspection possible at any time by prior arrangement. Free loaded on truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGErgotech | Ergotec | Ergotech280

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Bwsdpfx Anjygikwe Nen Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). Bodpfxsyguk Aj An Newn #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Bedpfx Asyguhhjn Njwn Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Condition: good (used), Year of construction: 2007, Ref. no.: 18615 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Bodpfx Anoza Dc Uo Nswn Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: good (used), Year of construction: 2005, Ref. no.: 18591 Manufacturer: ARBURG Type: 520 A 1600-400 All Electric Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Bedpfx Anjxf T I Nj Nswn Typical features of this series include: * Fully electric drive for all main movements * High energy efficiency compared to hydraulic machines * Excellent injection and positioning accuracy * Quiet and clean operation (also suitable for medical applications) * Low maintenance requirements The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics. ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, 3x VE20 Microbond SCI 3x New The parts have been in operation for approximately 200-300 hours. Bodpor Rdd Nsfx An Njwn The MICROBOND CSI system, consisting of a feed unit, control system, and high-performance generator, guarantees consistent welding quality. Robust yet highly precise mechanics enable constant gap control thanks to the patented MicrogapControl gap control system. The MICROBOND control system controls and visualizes this continuous joining process. Constant amplitude output and high continuous sound power enable process speeds of up to 800 m/min.

Condition: excellent (used), Year of construction: 1996, machine/vehicle number: 1996/1/20, functionality: fully functional, input voltage: 230,400 V, input frequency: 50 Hz, saw blade diameter: 420 mm, height adjustment type: mechanical, saw blade bore: 40 mm, actuation type: manual, total length: 9,000 mm, total width: 1,400 mm, total height: 1,800 mm, table height: 900 mm, year of last overhaul: 1996, Equipment: CE marking, GRAULE ZS 170N Cut-off and miter circular saw - swiveling and tilting - Saw blade diameter: 420 mm Rated voltage: 400/230 V, 50 Hz Electronic display for miter and tilt tiltable to the left 45°, to the right up to 25° swivels to the left up to 60° swivels to the right up to 45° Cutting height 170 mm Cutting width 430 mm at 90° Including machine stand Bwedpfx Aszbh Hgen Non and saw blade Accessories: GRAULE infeed roller conveyor complete with support feet and connecting angle Ball-bearing plastic rollers Ø 40 mm, roller width 300 mm, roller spacing approx. 300 mm, support feet for roller conveyor height 885 +/- 10 mm Roller conveyor with handwheel length stop GRAULE with electronic length display SIKU pneumatically retractable material stop. Ball-bearing plastic rollers Ø 40 mm, roller width 300 mm, roller spacing approx. 300 mm, support feet for roller conveyor height 885 +/- 10 mm Chip extraction

Condition: good (used), Year of construction: 2016, Ref. no.: 18657 Manufacturer: ENGEL Type: e-victory 440/160 CC300 ecodrive Hybrid machine Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision ENGEL e-victory 440/160: This is a hybrid machine (servo-hydraulic + electric) How it works Electric part: * Injection unit (screw movement) * Ensures very high precision and process stability Hydraulic part: * Clamping unit (mould closing) * Maintains clamping force efficiently without continuous energy consumption This system combines: * The precision of an all-electric machine * With the power and efficiency of a hydraulic system This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design. The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing. Key features: * Tie-bar-less design for maximum mould flexibility * Servo-hydraulic drive for high energy efficiency * Precise and stable processing performance * Compact footprint with a large mould installation area * Modern ENGEL control system The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures. Bedpfjy Ipgpsx An Newn Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.

Condition: used, The two hot runner systems from Feller are for sale. Bwodpfeza U Egjx An Njn

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I can gladly send you a description of the unit! Bedpfeza U Dcox An Nown Medium: Water Heating capacity: 9 kW Operating temperature: max. 160 degrees Celsius Cooling capacity: 40 kW Cooling: Heat exchanger Mobile