Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic Bdjdpog Trvrsfx Abuji pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: used, Double edger EG100, year of manufacture 2022, very good condition, max. board thickness 50 mm, max. edge width 300 mm, 7.5 kW, 2 knives Bodpfevr I Ihex Abuedi Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Band saw Felder FB510, year of manufacture 2019, very good condition, standard equipment Prices subject to change, errors, printing and typesetting errors reserved Bodpfxsvr I I Ij Abusdi

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood, automatic feed and return of the saw carriage, infinitely variable control of feed rate, saw blade height, and cutting lengths, pneumatic special pressure beam, Bedpfx Aeyzxkwobusdi front and rear support tables HP 520, longitudinal and cross cuts in a single operation, three-phase brake motor 6.8 HP / 5 kW and scorer unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm, good condition, machine ready for immediate use for further technical details, see pdf file (brochure) located in Neustadt/Weinstr. Transport available at additional cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: used, Martin T60c sliding table saw Bjdpozg U Hiofx Abuodi 5.5 kW motor, 430 cm carriage, Right-hand side adjustable with a motor to 840 mm, Max. blade diameter: 400 mm, Tilt 0-45 degrees, adjustable with a motor, Blade height adjustable with a motor.

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Bdsdpfxjn Nv Tis Abuji Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: excellent (used), Catalog number 7960 TECHNICAL DATA - max. cutting height 140mm - max. element width 700mm - working width of the saw arbor 580mm - arbor diameter 70mm - max. saw diameter 400mm - from above: - pressure pads/ejectors - 2 geared feed rollers - metal sliding roller - from below: - sliding roller Bodpfeztaciex Abujdi - pressure pads - smooth feed roller - saw arbor - smooth feed roller - metal sliding roller - stepless feed speed adjustment via frequency inverter - feed motor 3kW - main motor 22kW - overall dimensions L/W/H 1600x1300x1900mm - weight approximately 2000kg Net price: 46900 PLN Net price: 10910 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2004, CATALOGUE NUMBER 7880 Technical data: - max. cutting height 150mm - max. element width 500mm - working width of the saw blade shaft 400mm - shaft diameter 70mm - max. saw blade diameter 450mm - top: - anti-recoil devices - 2 toothed feed shafts, pneumatically pressed - bottom: - sliding roller - anti-recoil devices - 2 toothed feed shafts - saw blade shaft - 2 toothed feed shafts - stepless feed speed adjustment via a frequency inverter - feed motor 3kW - main motor 55kW - overall dimensions L/W/H 2120x1600x1630mm - weight approximately 2750kg ADVANTAGES – Polish production – solid construction – used machine, very good condition Bsdpfsztac Nox Abujdi Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 905312, functionality: fully functional, cutting height (max.): 2,150 mm, cutting width (max.): 4,150 mm, saw blade diameter: 250 mm, overall weight: 850 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. vertical cutting height: 2,150 mm Max. cutting width: 4,150 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Vertical cutting: Yes MACHINE DETAILS Bsdpozzbb Aofx Abuedi Voltage: 380 V Current consumption: 6 A Power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 1,350 x 2,830 mm Weight: 850 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: used, Year of construction: 2009, Used Machine Year of Manufacture: 2009 Features and Technical Specifications: Professional crosscut, rip, and miter saw Motor power: 1.8 kW Power supply: 230 V Blade speed: 4,200 rpm Bedpfszy D Agox Abujdi Blade diameter: 255 mm Turntable diameter: 328 mm Maximum cutting capacity: 80 × 305 mm Miter adjustment: up to 45° to the left and right, and up to 60° to the right Saw head tilt: from -45° to 45° Locked positions: 0° / 15° / 22.5° / 31.6° / 45° to the left and right, and 60° to the right Cutting capacity at 45° tilt to the left: 42 × 305 mm Cutting capacity at a 45° tilt to the right: 35 × 305 mm Cutting capacity at a 45° miter to the left: 80 × 204 mm Cutting capacity at a 60° miter on the right: 80 × 147 mm Combined cutting capacity on the left: 42 × 204 mm Combined cutting capacity (right): 35 × 147 mm Dimensions L × W × H: approx. 1,200 × 700 × 450 mm Weight: approx. 24.2 kg Base plate and turntable made of die-cast aluminum Pulling function for wide workpieces Laser projection to display the cutting position Workpiece supports that extend on both sides Folding stops for repeated length cuts Adjustable, tall aluminum stops Screw clamp for securing workpieces Adjustable cutting depth limit Fine adjustment of the angle setting Saw blade guard Chip collection bag Easy saw blade change Suitable for cutting ceiling moldings and crown molding

Condition: good (used), Year of construction: 2006, functionality: fully functional, STENNER MHS9 MK2 HORIZONTAL RE SAW LINE. This complete 9 head line comes with 12 metre infeed and 8 metre outfeed. Tilting heads which are ideal for Feather Edge board production 915MM diameter wheels Max width blade 100MM Saw speed 35M/S Max width timber 305/450MM Max height 305MM Main motors 9x 18.5KW Variable feed speed 15-60M/MIN Operator control station Also if required we have a Systems TM rotary auto stacker which is avaliable at extra cost All nine heads have new upgraded power feed wheels with sprockets, chain tension rollers and alloy blade guides for improved faster production. All guards have new sawdust exhaust outlets for added fire protection. Comes with 80% of orginal dust extraction trunking and operator cross over steps. All additions/improvements costing over 20k GBP. Comes with blades. It does not come with the cross transfer deck shown in video Production of 1.8m long Feather Edge boards is circa 36 m3 sawn per hr. This is a serious piece of equipment for large volume production and it is uncommon for a such machinery to come onto the market for sale. Bdsdpfx Aezwh Hwjbusi To be collected by customer from site Northamptonshire UK. Crane lorry essential Offers in excess of £80,000 GBP

Condition: used, machine/vehicle number: G-KR114377bH, Felder K7 circular saw, very good condition, 3000 mm table length, 600 kg Bodpfx Ajvw Ecysbujdi Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min saw band length 3650 x 27 x 0,9 mm weight of the machine ca. 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates Bdedpfx Abexaaqtjuoi - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: excellent (used), Year of construction: 1982, ULMIA 1710s table saw Year of manufacture: 1982 Tilt angle: 45° Bdjdpfx Aoz Sb Evjbuei Cutting length on the carriage: 750 mm Maximum blade diameter: 250 mm Cutting height: 75 mm Cutting width between the saw blade and the fence: 650 mm Carriage with a scale for angle cutting Table size: 1000x630 mm

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 1572, functionality: fully functional, operating hours: 5,500 h, power: 55 kW (74.78 HP), cutting height (max.): 1,000 mm, cutting width (max.): 1,200 mm, control type: PLC-controlled, overall weight: 20,000 kg, High-quality and complete Mebor wood processing line in excellent condition. Can be seen in operation in Gemert, the Netherlands. Included are: - Horizontal band saw HTZ 1200 Plus /year of manufacture 2019/, equipped with heavy-duty hydraulics for automatic log processing, maximum cutting length 9m, Optifast 10 control system - Multi-blade saw VR 900 /year of manufacture 2020/ with 3 movable heads - Log loader MLD Logdeck - 2x RCM 800 with left/right sorting Bodpfx Aboz Eadbeuodi - 2x CCP conveyor chains Excellent synchronization with the main band saw for maximum efficiency. The complete line has been professionally maintained and is ready for immediate use. Serious buyers are welcome to visit and see a demonstration on-site /in operation/. Please include your company details /including VAT number/ if you are interested.

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Length of the rolling table 2500 mm Bdjdpfjz E Sv Njx Abuei cutting width 1250 mm Motor output 4,0 kW Cutting height 90 mm Speed 4000 / 6000 U/min. weight of the machine ca. 650 kg

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 0-240-75-5616, functionality: fully functional, Equipment: CE marking, documentation/manual, SAWTEQ B-300 panel saw Bdsdpsz Tt Eijfx Abuji Cutting length: 3800 mm Cutting width: 3800 mm In very good condition, selling due to replacement with a different model.

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 200 mm, cutting width (max.): 460 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, overall weight: 2,050 kg, Equipment: CE marking, TECHNICAL SPECIFICATIONS: - Diameter of circular saw blades: 200 - 315 mm - Max. thickness of the material being cut: 200 mm - Min. thickness of the material being cut: 30 mm - Max. width of the material being cut: 460 mm - Max. number of circular saw blades per spindle: 10 pcs - Spindle diameter: 60 mm - Standard working length of spindles: 400 mm - Power of spindle drive motors: 2 x 22 kW - Saw blade shaft speed: 3500 rpm - Power of the feed drive motor: 1.5 kW - Feed speed range: 0 ÷ 15 m/min, infinitely adjustable - Power supply: 3 x 400 V, 50 Hz - Machine capacity up to 10 m³/h (dependent on the power of the spindle motors and the degree of material reduction) - Sawdust extraction ports: 2 x 150 mm - Noise emission below: 82 [dBA] - Overall dimensions (length x width x height): 1400 x 1150 x 1540 mm - Machine weight: 2050 kg Optional equipment: Bdsdpfx Aoz Sl Hwjbuji - Infeed table (2 m) and outfeed table (2 m) - Saw blades, diameter from 250 mm to 315 mm - Spacers between saw blades - Automatic feed speed controller

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new * Bsdszy H Dyspfx Abusdi

Condition: used, Stock of 4 circular saws for construction sites Bdjdpfxj Ahgp Hs Abusi

Condition: used, Radial saw Bjdj Ahgntjpfx Abusdi

Condition: used, Cutting area: 5300 x 2200 mm Cutting depth: 80 mm Bodpoynttfofx Abuodi Location: Nattheim

Condition: used, Motor: 3.0 kW Bdodpfszkl U Sjx Abuei Cutting height: 80 mm Swiveling function, no vice required Location: Nattheim

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 10-12-10-064, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,000 mm, saw blade diameter: 500 mm, Equipment: saw blade guard, scorer, ALTENDORF F45 – Panel saw, manufactured in 2010 Equipment according to the Altendorf factory archive, confirmed on July 31, 2026: - Manufacturer / Model: ALTENDORF F45 - Year of manufacture / Machine number: 2010 / 10-12-10-064 - Double sliding table: Table length 3,000 mm - Cutting width: 1,000 mm - Main motor: 5.5 kW (7.5 hp) - Saw blade diameter: max. 500 mm - Control: C-terminal on the machine stand - Scoring unit: 2-axis, with RAPIDO scoring system - Clamping system: Standard (toothed nut) - Table extension: 840 mm - Stops: Angle/miter stop; DUPLEX up to 1,350 mm - Electrical connection: 400 V / 50 Hz Complete video with original audio available in the advertisement. Bjdpfoztwvaox Abuedi Price upon request. Offer includes free loading onto a truck. Inspection, loading, and transport by arrangement. Scope of delivery according to individual offer. Taken over from a carpentry workshop in Reutlingen. Machine location: TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). Consultation and sales handled by DS-Maschinen in Stuttgart.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Altendorf F 45 EcoDrive with CE configuration - Year of manufacture: 9/2016 - Electrically adjustable height and swivel function 0 – 46° for the main saw blade with automatic correction of the cutting height when the saw unit is swiveled. Bdsdpfo Ahgzxox Abuji - 3-axis scoring unit for one-sided swiveling - LED lighting in the hazard area of the scoring unit - 5.5 kW (7.5 hp) with VARIO - Double sliding table, table length 3,200 mm - On/off switch on the double sliding table - Table extension 840 mm - Angle/miter stop with DIGIT L, cutting lengths up to 3,200 mm - CNC parallel stop, cutting width 1,300 mm - Toolbox (minimum length of double sliding table: 3,000 mm) - Front support roller, width 300 mm - Operating manual, operating tools, charger with batteries Machine is in very good condition, cleaned, and inspected.