Condition: ready for operation (used), Brand: SCM Model: P-230-S Feeder: Mahros Type: Ben200 8 spindle planer SCM with feeder Mahros, safety curtain and spare parts. Tech. info: Capacity: Max working width 230mm Max working height 120mm Spindles in order: below (4 kW, 5.5 hp), right (5.5 kW, 7.5 hp), left (7.5 kW, 10 hp), right (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), left (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), below (7.5 kW, 10 hp) Spindle diameter 40mm Max. diameter of tools that can be mounted under the work table: 190 mm Variable feed speed 10-50m/min Cardan driven with pneumatic pressure on feed wheel Feed motor power: 4.4/5.5 kW Motor power for raising/lowering: 0.55 kW (0.75 hp) Brake in the engines Elecricity: 400 volts, 3 phase, 50 Hz Cgjln Sxotpm S Es T Sot Machine dimensions: Length: 5900 mm Width: 1800 mm Height: 1600 mm Size for transport: 590x210x160 cm Stock no: 2002064BXA

Condition: used, Number of spindles 4 St. Working width 260 mm Working height 160 mm Length of the planing table 2000 mm Feed speed 6-12 m/min. total power requirement 28 kw Dimensions (L/W/H) 3.300 x 1.600 x 1.700 mm Dust suction hood 1 x 250 mm Weinig Cube four-side planer ----- Machine is cleaned and checked. Technical data ----- Working width 20 - 260 mm Working height 8 - 160 mm (with tool flight circle 125 mm) Spindles ----- WEINIG Easylock with precision reversible knives in HSS for quick and convenient knife changing. You have never changed a knife so quickly. Customer benefits: - no adjustment necessary - short downtimes - no adjustment errors - easy to use Motor strengths: 1st spindle bottom: 7.5 kW 2nd spindle left + 3rd spindle right common motor 11.0 kW 4th spindle bottom: 7.5 kW Feed system ----- Frequency-controlled feed, infinitely variable 6 - 12 m/min Durofer pointed tooth rollers with depth limiter and self-cleaning Pneumatic pressure for feed rollers, including water separator Cycle-controlled dressing to support manual dressing. The feed roller is released after the second feed roller has gripped the workpiece. After leaving the second feed roller, the feed roller is brought into the starting position for the next workpiece. Machine electrical system ----- Operating voltage 400 volts (voltage range 380 - 420 volts), 50 hertz Electrical design according to DIN VDE 01 13, electrical equipment of industrial machines EN60204, IEC- 204-1. Other electrical regulations are not taken into account. Before operating frequency-controlled devices and systems, the customer must install an all-current-sensitive residual current device in accordance with DIN/ VDW 0100-482 in operating facilities at risk of fire Control of the extraction system via the machine software Machine stands, tables and stops ----- Planting table 2.0 m long (including jointing tine) One sliding roller in the outfeed table Automatic lubricant supply for removing resin from the table, including 5 liters of lubricant. - controlled by incoming and outgoing wood - lubricant quantity dependent on the set planing width - controlled by running meters traveled - improved transport of individual parts - reduction in contamination from resinous wood - extremely easy to use One sliding roller in the outfeed table MPV - MoulderPreView ----- Optical projection of the finished dimensions onto the raw part before processing. - Dimensional control before planing - Consideration of deflection and curvature when setting - Quick correction of the planing and joining Customer benefits: Cgoln Sowhf Ivsx T Set - Assessment of the workpieces before processing - Higher product quality - Visual inspection Machine operation ----- The clear software was specially developed for the CUBE. Thanks to the intuitive operation, training is not necessary. What can the CUBE software do: - Lightning-fast setting of the workpiece dimensions - Motorized setting of the planing and joining - Clear layout, large symbols - Memo function The last 10 dimensions are saved and can be repeated if necessary. - stepless adjustment of the feed rate - ...

Condition: used, Year of construction: 2009, table length: 2,600 mm, power: 7.5 kW (10.20 HP), table width: 920 mm, No. 04469 Spindle moulder / swivel spindle milling machine Casolin F 45 KL EVO Used, year of construction 2009 Very heavy version with full equipment Control unit EVO EL 2 with programming functions The body of the machine consists of one part Spindle swivels +/- 45.5° on both sides 4-axis control EVO Spindle diameter 30 mm Effective height of the spindle 140 mm Maximum tool diameter for profile milling 250 mm Maximum tool diameter for tenoning 300 mm Motor power 7.5 kW Direction of rotation right/left Speeds 3000 / 4500 / 6000 / 8000 / 10000 rpm Table with extensions 2600 x 920 mm LW Including 3-roller feed unit Maggi 2 suction connections each 120 mm diameter Transport dimensions approx. 2600 x 1500 x 2000 mm LWH Weight approx. 1350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location Cgjlowhck Uen Sx T Set

Condition: ready for operation (used), Year of construction: 1995, Brand: IST Type: 4 lamp Year: 1995 Csln Sjvxitlsx T Sjgt techn info: Through feed width 1600 mm Lamps efficiency 100 W/cm (14 kW/ lamp) Power: 400 V, 50 Hz Stearing power: 230 V, 50 Hz Energy consumption: 145 A UV oven dimensions: 5000x2540 mm (lxw) Electric cabinet dimension: 1600x600x2000 mm (lxwxh) Stock no: 2000361BXA

Condition: used, Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 4100 x 2650 x 1050 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 4100 x 2600 x 1050 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 Cgeln Sx Towhf Iij Sst mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Year of construction: 1987, Märke: Bacci Model: MOA Cgelev T Tp Tsn Sx T Set Machine no: 1844 Year of manufacture: 1987 Stock no: 2002478

Condition: used, Year of construction: 2011, Tenoning spindle 1 Stk Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2784 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Adjustment range: radially pneumatically controlled to 8 positions, e.g., for edge rounding from above > Laser alignment light for detecting the sawn section Item 2: Rounding unit, horizontal, bottom ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm mm > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm > Axial adjustment range mechanically coupled to cross-cut saw > Radial adjustment range pneumatically controlled on/off Length stop NC-controlled ----- > Length 3,500 mm > Electronic length stop Item 3: Tenon and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 3,500 rpm > Maximum tool travel: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Cylinder and Counter-rotation) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (concurrent spindle area), Rung support bar from above in the area of ??the profile milling unit vertically on the right, and profiling spindle. Item 6: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed: 9,000 rpm Cgeln Sx Tswamqve Sjt > Max. tool travel: 130 mm > Axial adjustment range: 30 mm, 8 positions > Radial adjustment range: 125 mm, 8 positions Item 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions > Radial adjustment range: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool travel: 210 mm > Motor power: 3.8 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial adjustment ra...

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Celn Sx Tomb U A Ie Sogt Model: PFS 2100 Year of manufacture: 1963 Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- Cgeln Sx Tov Uq Tlj Set 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: good (used), In-feeder TP Type: TP Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable for current subject length. Cgoln Sstt N Dpsx T Sjt Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002144BXA Note: some images in the ad may be on another equivalent machine

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Cslnsvnv Uus Sx T Ssgt Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: good (used), Year of construction: 2000, Functionality: fully functional, Brand: Holzma Type: Optimat HPP 82/43 Machine no: 0-240-06-4258 Year 2000 Tech. info: Saw length 4300mm Saw blade overhang 95mm Motor (main)13.5kw Scoring motor 2.2kw Saw carriage feed 5-125m/min 4 infeeder tables with air cushions Power 19.5kw, 400volt, 3 phase 35 AMP Size for transport: A total of 4 parcels. 1, saw 6.5 x 1.2 h 2.0. 2, Beams and grips 5.1x1.0h1.0. 3, Table in front 2.4x0.8 h 2.0. 4, 1 pallet sheets 1.2 x 0.8 H 1.6 Stock no: 2002183BXM Cgeln Sxotvmrfj T Sot

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- Cgjln Sxeu Su Huj T Set > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: ready for operation (used), In-feeder TP Type: TP Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable for current subject length. Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002173BXA Cgeln Sx Tsvxuy Rs Sjt Note: some images in the ad may be on another equivalent machine

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 992.00 euros net Cgsln Sx Tevnh T No Set Brackets: packages 15 mm brackets (package of 2000): Price 21.00 euros 12 mm brackets (package of 3000 pieces): Price 31.00 euros 10 mm staples (package of 3000 pieces): Price 31.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: ready for operation (used), Brand: Bila Coln Sov Hyfhex T Sogt Lifting system tawi Machine no: 250315-1 Stock number: 2002444BXM

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Csljnl Nqqjn Sx T Segt Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Year of construction: 1995, Condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7249 Year of manufacture: 1995 Cjln Sjg Hqprjx T Sjgt Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 2,2 kW, 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Weight: 1450kg Stock No: 2000352

Condition: used, engine output 5 kW saw-blade dia. 300-350 mm Working speed 0-40 m/min weight ca. 1550 kg kg Concept 350 PLUS "Partnership Edition" pressure beam saw Cutting length: 3.200 mm ----- combines the advantages of different sawing systems. Flexible as one Panel saw, precise and safe like a pressure beam saw and ergonomic like a rip saw ----- Manufacturer description: - Saw unit can be swiveled up to 46° - Pressure bar, including LED lighting with 3 different action colors: WHITE: Machines in rest position RED: Pressure bar lowers or emergency stop function BLUE: Sawing unit moves - variably usable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronization - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, including: Saw blade stand, template holder, emergency stop button, start button, selector switch Groove/score saws/saws, rotary switch feed speed, switch for Laser (option) and USB socket Partnership Edition including: - Motorized width stop with 4 aluminum stops, which move synchronously. All 4 stops move up to 1,300 mm. The table is approx. 2,000 mm long. - Screen control (8'' touchscreen). The graphical interface offers the following functions: Tool database, angle cut calculation at the length stop, Cutting plans can be created and saved, programs can be saved USB can be saved, exported and imported. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade projection 350mm saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 - 350 mm, bore 30 mm - Rotation of saw blade: 4,000 rpm. - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min. - Total length: approx. 3,670 / 4,270 / 4,870 mm (depending on cutting length) - Weight: from approx. 1,150 to 1,550 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Suction nozzle: 1 x 100 mm, 1 x 120 mm Model variants: - CONCEPT 350 PLUS with 2,600 mm cutting length - CONCEPT 350 PLUS with 3,200 mm cutting length - CONCEPT 350 PLUS with 3,800 mm cutting length - CONCEPT 350 PLUS with 4,000 mm cutting length and bigger on request! ----- Price of the above-mentioned machine with equipment variant on request! ----- General options with extra charge: - 3410451 cutting line laser - saw motor with 7.5 kW (10 HP) including automatic star-delta Start-up - 41/03 programmable saw blade height adjustment - 3380132 Miter stop +/- 50° swiveling with length compensation, incl. Telescopic stop with folding stop - 3380135 Miter stop +/- 50° swiveling with length compensation, incl. 2 Digital displays: 1 digital display for folding stop, 1 digital display for the stop on the telescopic extension -3380136 Miter stop swivels +/- 50° with length compensation, including 3 Digital displays: 1 digital display for folding stop, 1 digital display for the stop on the telescopic extension, 1 digital display for the miter indicator - 3380138 additional support table 800 x 200 mm, can be attached - 3515013 Auxiliary stop for long, narrow workpieces, adjustable via scale (Support table 3380138 required) - 3515014 Auxiliary stop for long, narrow workpieces, adjust... Cgeln Sx Tjtg Aiho Sjt

Year of construction: 1996, Condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL1 1300 Machine no: 7894-11 Year of manufacture: 1996 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Weight: 1450kg Cjln Sx Tog Hr Aye Ssgt Stock No: 2000359

Condition: used, max. tool diameter , mm 0 , mm operating pressure , bar filling amount 52 l Quicksonic QS 520 Ultrasonic cleaning device with lid and work basket ----- Technical manufacturer's description: External dimensions (length x width x height): 560 x 460 x 510 mm Useful dimensions (length x width x height): 500 x 400 x 260 Useful basket dimensions (length x width x height): 444 x 364 x 224 Capacity: approx. 52 l Ultrasonic power Rated power: 800 watts Cgsln Sx Tjumng Ao Set Peak power: 1600 watts Operating frequency: 40 or 25 kHz Mains voltage: L+N+PE, 230 V/50-60 Hz Heating power: 2000 watts Heating control: 30 - 85°C Timer: 0-15 min & Duration ----- All prices ex works plus packaging, transport, insurance, and statutory VAT. (Technical specifications according to the manufacturer - without guarantee!)

Year of construction: 1995, Condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7251 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Cgsleg Hr A Ien Sx T Sot Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 2,2 kW, 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Weight: 1450kg Stock No: 2000360

Condition: new, Working width 4000 mm Cslnod Ih E Ao Sx T Sogt Working height 2600 mm Number of cylinders 5 St. weight 2000 kg Dimensions (L/W/H) 5550x1300x3000 mm

Year of construction: 1995, Condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Cgoln Ssib H Sljx T Sot Motor: 7 kW, 50 Hz, 230/400V, 3-phase Size for transport: Length: 220 cm Width: 115 cm Height: 150 cm Stock no: 2001164BXM

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Cgoln Sed Rzc Rjx T Set