Condition: new, Year of construction: 2025, Functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Fsbvbgowf Hdgsm Segb Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: used, Year of construction: 2007, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: Fsbvbev U Nraegm Sogb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 2010, Functionality: fully functional, heating capacity: 600 kW (815.77 HP), total height: 3,400 mm, total length: 4,500 mm, total width: 3,000 mm, control cabinet width: 400 mm, control cabinet length: 1,000 mm, control cabinet height: 2,000 mm, Equipment: hot water, Endress moving grate combustion system with automatic discharge with automatic ash removal with automatic ignition available from August 2025 Fobvbgov N Hxgjm Sogb Can be inspected during operation

Condition: used, Input capacity 400mm/200mm Hedgehog trainer almost new entry Fgsbvbgmewbzcvo Sjb Knives 37kw-50hp engine Control cabinet

Condition: good (used), Year of construction: 1984, Used Killinger wood lathe Model KM 2000 S Year 1984 with KM-300 copying device Center distance 1050 mm Center height 220 mm Spindle mount M 33 Fgjbswd Nldsvbgm Seb Tailstock with MT2 taper quill Tool rest 300 mm 4 speeds: 530-1100-1700-2600 rpm Motor 400V/0.75 kW Length 174 cm Width 50 cm Height 115 cm Weight approx. 110 kg

Condition: used, Year of construction: 2008, Working dimension X: 1.250 mm Fsbvbgmsud Hmbj Segb Working dimension Y: 800 mm Working dimension Z: 60 mm Number of separate aggregates: 1 CNC-axes: 1 Horizontal drills in Y: 1 Dowel insertion: Yes Glue system: Yes Dowel insertion aggregates: 1 Dowel diameter: 8 mm Dowel length max: 35 mm Stationary machine: Yes Alternate loading: Yes Clamping system: Pneumatic clamping Safety device: enclosed fence Barcode reader: Yes Barcode control: Yes UPS - Uninterruptible Power Supply: Yes Control: HOMAG POWER CONTROL PC 85T Software: HOMAG WOODWOP 5.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 6 kW

Condition: excellent (used), Year of construction: 2020, Edge bander Manufacturer: Felder Type: G360-4 Year of manufacture: 2020 Fgobvbgsv A U Upsm Sjb Operating hours: approx. 439 h Edge thickness: 0.4 -3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total output: 5.5 kW Total length: approx. 3,200 mm Joining unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: good (used), Various suction collectors, suction distributors several available, see photos for details Extraction bell B, C: 140 euros each Fjbvjtp Hpbebgm Segb The parts can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, machine/vehicle number: 005989, Position 1: Spiral Wrappers KUPER-KFE-TANDEM 3 1600 Fgobek Dvhwsvbgm Sob Position 2: Shrink-Wrap Ovens KUPER-KFE-TANDEM 3 1600

Condition: reconditioned (used), Year of construction: 1998, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut Fgobvbgolatv Ajm Sjb - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: used, Motor power: 4.0 PS/HP (3.0 kW), Planer block: 2-field system planer knives, Year of manufacture: 1992, Planing width: 410 mm, Thickness height: 4220 mm, Milling spindle Ø: 30 mm, Accessories: with feed device, Max. chip removal: 5 mm, Cast iron planing tables height adjustable and foldable, Planing guard 410 mm, Planer stop pivoting 90 45 degrees, Thickness planing width 410 mm, Circular saw D30 mm pivoting, Parallel cutting scale, Finely adjustable milling stop, Outrigger table, Max. cutting length 1750 mm, Drill chuck 016 mm, Drill support Fgsbvbowhb Tujgm Ssb

Condition: used, Ganner Selekta 252 TR dowel insertion machine for automatically gluing and driving round dowels into prepared holes. The machine is ideal for efficient dowel joints in furniture and cabinet construction and offers high repeatability in series production. Dowel diameter: 8 mm Fobvewd Iiusbgm Sjgb Dowel length: 20–50 mm

Condition: excellent (used), Year of construction: 2009, Dresser Manufacturer: Felder Type: A951 Year of construction: 2009 Working width: 510 mm Table length: 2.250 mm Power: 5.5 kW Number of knives: 4 Fgjbvberg Ep Aegm Seb Knife type: V-bar shaft Motor brake: Yes Weight: 750 kg Dimensions: 2,427 x 1,340 x 890 mm Suction nozzle diameter: 140 mm

Condition: good (used), Year of construction: 2002, Robust swivel milling machine T 26, swivels from -45 to +45 degrees with 2-axis positioning control Duocontrol Swivel milling machine with very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L running Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is shown in the upper display, which is then set at the stop, so settings can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel-fix quick-change spindle with torque wrench Electrically adjustable stop, inlet jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of the height and stop Stop can be swiveled away with lifting device (for curved milling work) Table opening via eccentric table rings, electrically adjustable Table extension right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Foldable stop for insert milling Original Martin aluminum stop jaws with two bars Workpiece pressure device Aigner Centrex 3-roller feed HolzHer 1117, with 8 speeds, R/L running, new rollers Feed socket, can be switched from the control system Extraction nozzle 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been repainted Fgsbovv H T Revbgm Sob Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this provider".

Condition: good (used), Cutting area approx. 5200 x 2100 mm Manual feed Fjbvbgmswduame Segb Automatic deflection grate Cutting depth 70/80 mm Further technical data available upon request

Condition: used, machine/vehicle number: 007766, Position 1: Roller Conveyors BURKLE + HEESEMANN-. Position 2: Brushing Machines BURKLE + HEESEMANN-. Position 3: Roller Conveyors BURKLE + HEESEMANN-. Position 4: Roller Spreaders BURKLE + HEESEMANN-. Position 5: Roller Spreaders BURKLE + HEESEMANN-. Position 6: Ovens BURKLE + HEESEMANN-. Position 7: Roller Spreaders BURKLE + HEESEMANN-. Position 8: Roller Spreaders BURKLE + HEESEMANN-. Position 9: Ovens BURKLE + HEESEMANN-. Fgobvbgmsv Akwmj Seb Position 10: Roller Conveyors BURKLE + HEESEMANN-.

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 2019-45, total length: 8,000 mm, total width: 4,000 mm, feed length X-axis: 8,000 mm, feed length Z-axis: 1,300 mm, cutting speed: 6,000,000 mm/min, feed rate X-axis: 70,000 m/min, cutting width (max.): 1,800 mm, table height: 700 mm, cutting height (max.): 1,300 mm, table width: 1,300 mm, table length: 3,000 mm, working height: 700 mm, input voltage: 400 V, saw band speed: 6,000,000 mm/s, HEMA CoreCutter from our test center - 6 years of operation in the test center - Ideal for sawing lightweight blocks made of aramid, Nomex, Kevlar, balsa, PET, PVC, PMI, PU, and much more Gantry - Steel construction - 2 linear guide units per column - Servo motor with ball screws per side - Bellows for guide/spindle cover - Red/yellow/green signal lights on the gantry Control system - Control cabinet with air conditioning unit - Siemens PLC - Frequency-controlled drives - WAGO IO-Link modules - Control panel with 12-inch screen, integrated in the control cabinet Fjbvbgowifxdsm Sogb Paint finish - HEMA standard, gray RAL 7031/7047, signal red RAL 3001 Technical specifications: - Wheel diameter 2 x 900 mm - Cutting width approx. 1800 mm mm - Cutting height/vertical stroke approx. 1300 mm - Cutting height (saw blade – cleaning nozzle) approx. 300 mm - Belt drive 400 V, 50 Hz 22 kW - Continuously variable belt speed 500 – 6000 m/min - Table length 3000 mm - Table feed max. 80 m/min - Compressed air 6 bar - Total machine length max. 8 m

Condition: used, Year of construction: 2001, machine/vehicle number: 5359, Technical data: - Manufacturer Elmag Superfici - Type ETC3/2-24-5500 - Year of construction 2001 - Working width 1.300 mm - Number of pallets 24 pcs. - Max. Part height ~70 mm - Clearance height between pallets 100 mm - Dimension: centre pallet - centre pallet 3.800 mm - Max. Part length 5.200 mm - Number of controllable temperature zones 2 pcs. - Supply air capacity 11.000 m³/h - Max. heat output 2 x 40.000 kcal/46 kW - Max. Drying temperature ~ 55 - 60 degrees - with heat exchanger, heating water - Flow direction in U-shape - Inlet side left - Infinitely variable feed rate 2 - 10 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7.400 mm Fgebvbswbtv Uogm Seb - Width 6.510 mm - Height 3.100 mm - Location in stock - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: like new (used), Lot 29 Band saw blades for band saws, e.g. Zimmermann BZU 800 model building band saw dimensions approx. 6130mm long, various widths from 8 - 20mm Condition see photos, obviously all saw blades are still sharp Sale only as a bundle, not individually. Price is for all 29 blades. The parts can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier". Fjbvbget I Ezasm Ssgb supplier".

Condition: used, Trolley 7 levels - year of construction unknown - min. part length 320mm - max. part height approx. 210mm Fgebvewbtvzebgm Ssb - number of levels 7 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Year of construction: 2021, Condition: like new (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. The machine can be demonstrated on site by appointment. We only offer Fsbst Ixhgovbgm Sogb only machines that are ready for demonstration in our warehouse, see "other offers from this supplier". offerer".

Condition: used, Trolley 12 levels - year of construction unknown Fgobvbgmowbtvuj Sob - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm

Condition: excellent (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. Fsbot Ixikovbgm Ssgb Year of manufacture unknown The machine can be demonstrated on site by appointment. We only offer only offer machines that are ready for demonstration in our warehouse, see "other offers from this offerer".

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock Fgjbvbgmsu S N R Eo Seb - Volt/HZ: 400/50

Condition: excellent (used), Year of construction: 2007, Robust swivel milling machine swivels from -45 to +45 degrees Tiltable milling machine with very good equipment A treat for every Hofmann fan Complete 3-axis positioning control for spindle height, spindle tilt and stop. Programs can be saved Fobvbjvbrygogm Ssgb All three axes can be positioned. Adjustment of the single jaw with SIKU counter Swivel control panel at eye level for control Manual movement of each axis and positioning to the set target value Pole-changing drive motor 4.7 / 6.3 kW with automatic motor brake R/L run Swivel angle electrically adjustable from - 45 to + 45 degrees Height adjustment max. 125mm, electrically adjustable Six speeds 3000, 4000, 5000, 6000, 8000 and 10,000 rpm Spindle diameter 30mm Fence is adjusted electrically Electric spindle lock for tool change Table with table slide instead of table rings Planed machine table 2750mm long Extendable workpiece support at the front Cast fence jaws Aigner Centrex workpiece pressure device 4-roller feed Holzkraft, with 8 speeds, R/L run, new rollers Feed socket, switchable from the control unit Extraction socket 2 x 120mm Compressed air connection 6bar 2 emergency stop switches Original paint, partially repaired Operating instructions CE mark Dimensions approx. 2800 x 1350 x 1900mm (LxWxH). Weight approx. 1300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".