Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Fjbebtnf Es Ebmf Njgb Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 Fgeb Ebmjwhpcqof Nsb - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 /

Condition: good (used), Double edger with two electrically adjustable saw blades Max. cutting length 4.2 m Max. cutting width 0.6 m Plane alignment via joist lock and cross chains in the table Cut gap indication via laser Febowinbnj Ebmf Njgb

Condition: used, Year of construction: 1997, machine/vehicle number: 970715, reserviert frankreich #15989 max. Schnittbreite : 4300 mm max. Schnitthöhe vert. : 2150 mm max. Bearbeitungsdicke : 80 mm Sägeblattdurchmesser : 300 mm Sägeblattbohrung : 30 mm Auflage unten : Rollen starr Fgeb Ebmewgr Hvjf Nob Materialauflage : Kunststoffelemente Kleinteilauflage : Ja Messsystem : Skala Schwenkung Sägekopf : manuell Befestigung : freistehend Absaugung : Limpio Absaugsystem Motorleistung : 3 kW

Condition: used, Year of construction: 2006, POUWELS SEMI-AUTOMATIC STAIR ROUTER LARGE WORK TABLE & VACUUM-MOUNTED PART FIXING Brand: POUWELS Type: DEF 500A Serial No.: 171 Year: 2006 Machine offered as is, with no special work required at this price. But can be reconditioned: contact us. The Pouwels DEF 500 A semi-automatic router was specially designed for staircase manufacturers, but not only. It offers machining freedom, combining digital precision and manual work! MACHINING CAPACITIES: - Vertical or horizontal milling and drilling - Head (arm) rotation: -70/+70° - Lateral grooving or drilling, motor tilt: 0-90° - Chuck speed from 0 to 18,000 rpm - Electric and pneumatic movements, strokes: X axis (length): 4750 mm Y axis (width): 900 mm Z axis (height, thickness): 150 mm - Adjustment accuracy: 1/10 mm MACHINE COMPOSITION: - Robust, welded frame NSK slide for all axes - Work surface: 6000 x 500 mm Smooth table 6000 x 620 mm with depth stops Two removable grooved aluminum vacuum shelves 200 x 500 mm Set of 4 free-standing suction cups - 4 kW milling/routing electric spindle Variable speed start ER25 tool holder connection Positioning laser and double bit thickness lines - Automatic step device for milling and drilling Depth gauge device on barrels Bit depth adjustment device - Milling stops and manual locks Step width and thickness - Touchscreen control panel Digital angle and depth displays Foot control OTHER FEATURES: - 400V overall power supply. 3-Phase + N+T 50Hz 5G 2.5² cable - Installed power 4.5 kW (6.1 hp) IN 12A Main motor 1.6/4 kW 1 x 2.4 kW vacuum pump - Pneumatic supply 8 Bar - Extraction, 1 x 100 mm diameter closable hood Recommended flow rate: 3000 m3/h Shipping dimensions: 5.30 x 1.20 x h. 1.80 m Fgsb Ebmelc Hyvof Neb Estimated total weight: 2250 kg - Overall dimensions: 6000 x 2000 x h. 1800 - Weight: 2300 kg Machine supplied with operating instructions, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or extraction systems. Possibility of supplying some used and new tools: contact us!

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support Fjb Ebmsrrzklsf Nogb ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm 67641340f13ce

Condition: as good as new (ex-display), Year of construction: 2025, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° Fsb Eboci Tvhjmf Negb - Dressing - working width 300 mm planing table length 1.510 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. Fsb Ebmfjwhn T Ij Nogb High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters.

Condition: used, Year of construction: 2003, Functionality: fully functional, Saw blade diameter 500 mm Saw blade motor power 4.0 kW ATTENTION: No motor brake Roller conveyors: 1 m to the left of the saw blade 2 m to the right of the saw blade Roller diameter 60 mm Usable width approx. 590 mm 2 manually adjustable folding stops Scale rubbed off and difficult to read Emergency stop switch in the operating area Working height approx. 760 mm Connected loads: 400 V 3Ph, 50 Hz Suction connection diameter: 100 mm Optional: Renewal of the dimension scale Fob Ebjuglvtomf Negb

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: Feb Ebmjrx Tatsf Njgb - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surf Feb Eed R U Agebmf Negb

Year of construction: 2025, Condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Fgeb Ebmodwh E Aef Nsb Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Year of construction: 2022, Condition: new, XSD310 400 Volt Weight: 280 kg Surface planer planing width: 310 mm total length of planing table: 1400 mm diameter planer shaft: 70 mm Tersa knife shaft rpm: 5500 dimensions planing fence: 1300 x 150 mm inclination adjustment of dressing fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power 4 HP Thickness planer dimensions thicknessing table: 430 x 310 mm passage thickness planer: 230 mm diameter infeed rollers: 30 mm feed speed: 6m/min Accessories: Tersa knife shaft Handwheel adjustment thicknessing table with mechanical indicator Location: Ex stock 54634 Bitburg Fgob Ebjdkl Sqjmf Nsb Machine is in our showroom and immediately available.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Fgjb Ebmfotnz Hbj Nsb Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 1999, Running direction of the panel : from operator to left max. glue thickness : 5 mm min. Workpiece thickness : 10 mm min. Workpiece width : 90 mm feed speed : 10 m/min Heating time : 5 min Automatic roll magazine : Yes cross-cut shears up to : 0.2 - 3.0 mm autom. gluing : glue pot with granulate on top cross-cut saw : rigid 90 Combination trimming unit : Yes Fob Eberutcyemf Njgb unit display : display type of control : manual Operation : Selector switch/push buttons Protective hood : Yes Chassis : yes Dimensions : 2800 x 1400 x 1400 mm Weight approx. : 550 kg Location : Comes to stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Fgsb Ebehkzttemf Neb Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm Fgeb Eji Am Ukobmf Neb max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Fgsboi Anade Ebmf Neb F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024

Year of construction: 1991, Condition: excellent (used), Frommia long hole drilling machine Type: 770 drill holder : drill chuck with key max. drill diameter : 1 - 20 speeds : 2900 rpm max. drilling depth : 145 mm operation : two-hand operation of height adjustment : hand wheel reading of height adjustment : scale clamping cylinder actuation : hand eccentric types of construction : movable drilling head table width : 560 mm table depth : 300 mm Fob Eolc Eurebmf Negb working height or feed table height : 900 mm weight approx. : 220 kg dimension : 1200 x 900 x 1200 mm Motor power : 1.5 kW power supply ca. : 400V / 50 Hz / 4.8 A / 2,2 kW Accessories : some drills Location : ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Fob Ebmfeufggwo Negb Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Fgsb Ebmsr Hr D Nof Nob Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Feb Ebmfsr Id S Ee Njgb Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1995, Maka universal edge sanding machine with oscillating sanding belt Type: KSM 150/2 Fob Esr Igtrjbmf Njgb Oscillation: yes Solid sanding device: yes Funnel sanding device: yes Can be tilted up to: 45 - 0 + 45° degrees Motor power: 2.0 kW Suction nozzle Table size: 1440 x 220 mm Weight: 530 kg Sanding sleeve device CE marking Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, operating hours: 619 h, Weima briquetting press C 140 top condition Only 619 operating hours Year of manufacture 2018 Compact design, high reliability and an excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Total dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput (kg/h) 30-40 Hydraulic oil quantity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated pliers Pre-compressor with end-position dampened cylinder and screwed cover Switch box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on - off Fgsb Eevlv N Tobmf Neb Location: 54634 Bitburg

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Pneumatic tensioner Fob Ebovk Dqvomf Njgb Revolver stop Material support Pneumatic foot pedal Location: from stock 54634 Bitburg - immediately available -