Weber Werkzeugmaschinen GbR

Condition: like new (used), Year of construction: 2021, Technical Specifications: Flow Rate: Viscosity 1 cST (1°E): 35 l/min Iolhov U Aploccqloar Viscosity 21 cST (3°E): 20 l/min Viscosity 60 cST (8°E): 10 l/min Drive Power: 0.75 kW Rated Power: 2 kW Rotor Speed: 4615 rpm Rotor Diameter: 230 mm Separation Factor: 200 g Sludge Volume: 1.5 dm³ Inlet Connection: 3/4" Inlet Head: Specific Max. Solids Capacity: 6 kg Net Weight (Centrifuge), Approx.: 42 kg System Weight, Approx.: 300 kg

Condition: used, Year of construction: 2014, Technical specifications: Magnification: 10x Diameter: 315 mm Max. workpiece height: 103.5 mm X/Y travel: 150 / 50 mm Iajlhev Ukx Ieccqler Table size: 280 x 152 mm Effective working area of measuring table: 1840 x 82 mm Power supply: 230 V Machine weight, approx.: 116 kg Accessories: - Precision vise - Carrying handles

Condition: used, Year of construction: 2005, Features: - SK40 spindle - Max. speed 18,000 rpm - 24 tool changer pockets / "bread drawer" - Swivel head and rotary table Iajlhsv Tn Ikoccqler

Condition: used, HSK - Motor-driven guillotine shear: - Motor: Dietz 380-3-50, 2.2 kW - Stroke rate: 100 rpm - Weight: approx. 700 kg Islhev Tm Hljccqlear - Driven by brake motor - Cut initiated by a movable foot switch - Shear table with support table extended to approx. 600 mm - Side stop TA 500 with scale - Folding rear width stop ZA 500 - Manually adjustable. The stop can be raised for long sheets. - Fully installed and ready for use Additional: Pneumatic hold-down device

Condition: used, Year of construction: 2021, Operating hours: 5 hours Technical specifications: Max. bending capacity: 9 mm Max. pre-bending capacity: 7 mm Cylinder diameter: 775 mm Material with yield strength: 260 N/mm² Iajlhov Tmp Teccqlsr Roller diameter: 155 mm Max. sheet width: 1500 mm Dimensions (LxWxH), approx.: 3200 x 1500 x 1200 mm Weight, approx.: 2500 kg

Condition: used, Year of construction: 1999, Technical specifications: X-axis travel range: 2500 mm with repositioning: 5000 mm Ielhcjv Sbdvocqlear Y-axis travel range: 1550 mm Z-axis travel range: 300 mm Max. table load weight: 330 kg X/Y axis speed: 80 / 80 m/min Simultaneous axis speed: 113 m/min Laser power: 2000 W Max. sheet thickness: 12 / 6 mm Width, approx.: 2300 mm Height, approx.: 1600 mm Weight, approx.: 6800 kg

Condition: used, Technical specifications: Power supply: Simpac 110/220 DF Total water consumption: 54 l/min Cooling water pressure, min./max.: 5/6 bar Control system: Siemens 840D Frequency: 50/60 Hz Iaslhccjv Rp Dzsqljr Nominal apparent power: 225 kVA Floor space requirement, approx.: 2200 x 3000 mm

Condition: used, Year of construction: 2006, Akon Robotics ASK 602 welding cell Equipment: - EWM Hightec Welding Phönix RC 2 welding source - Kuka KR 6 ARC welding robot, built in 2004 - 2 welding stations as a rotating device Iaolhcev Rburscqljr

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Iajlov N Uyrohccqljr Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: reconditioned (used), Year of construction: 1970, Heidenreich & Harbeck Hamburg 840 Condition: Used Year of construction: 1970, geometrically overhauled in 2023 Technical specifications: Swing diameter over bed: 840 mm Swing diameter over cross slide: 520 mm Center distance: 1500 mm Center height: 420 mm Motor power: 11 kW Bed width: 600 mm Spindle bore: 127 mm Longitudinal feeds: 0.08 - 2.8 mm/rev Cross feeds: 0.04 - 1.4 mm/rev Quill stroke: 300 mm Spindle speed: 7.1 - 1400 rpm Weight, approx.: 6500 kg Dimensions, approx.: 4000 x 2200 x 1800 mm Equipment: - Forkardt 3-jaw lathe chuck, D = 400 mm Islhov N T Smsccqloar - 3-axis digital readout - Quadruple tool post Scope of partial overhaul: - Machine partially disassembled and repainted - Guideways ground on both sides (Z-axis, Z-axis, and X-axis) - Tailstock sleeve hard-chromed and ground (inside/outside) - New stainless steel back plate

Condition: used, Jaw width: 125 mm Opening width: 150 mm Ijlhcsv Hcyzscqlsar The vice does not have a pipe clamp.

Condition: like new (used), Milwaukee inspection camera M12 ICAV3 with battery and charging station Iajljv Hbq Sehccqlsr

Condition: used, Technical data: Drill diameter: 1.5 - 3 Drill chuck: B16 Spindle stroke: 50 mm Thrust: 150 mm Column diameter: 46 mm Motor power: 350 W Connection: 230 V Dimensions (WxDxH), approx.: 220 x 450 x 590 mm Iaolhccqev Ebrmjler Weight, approx.: 55 kg Equipment: - Machined base with T-slots - Gear chuck

Condition: used, Technical data: Ijlhcsv Eadnecqloar Speed: 2900 rpm Disc dimensions: 175 / 25 / 51 mm Motor power: 0.25 kW Dimensions (WxDxH), approx.: 370 x 220 x 235 mm

Condition: used, Jaw width: 80 mm Iaslhov D Hv Ioccqlor Opening width: 75 mm

Condition: used, Jaw width: 160 mm Islhev D Hvzjccqlear Opening width: 125 mm

Condition: used, Technical data: Disc dimensions: 175 x 25 x 32 mm Motor power: 0.6 kW Dimensions (WxDxH), approx.: 410 x 300 x 260 mm Iaoljv Dufdjhccqler Weight, approx.: 16 kg

Condition: excellent (used), Year of construction: 2019, Operating hours: 392 Strokes: 23402 Iajlhcsv Av Uwocqlor Year of manufacture 2019 Technical data: Pressure: 130t Bending length: 3150 mm Column width: 2600 mm Thrust: 500 mm Distance table / ram: 445 mm Stroke: 250 mm Speed down: 150 mm/sec Speed bending: 0-10 mm/sec Speed up: 120 mm/sec Total power requirement: 15 kW Weight, approx.: 10400 kg Space requirement, approx.: 4000 x 1800 x 2900 mm Equipment: - Segmented upper tools - Segmented die - Touch screen - Control DELEM DA-66T - Controlled back stop (2 axes)

Condition: used, Technical Specifications: Tool Holder: MT 3 Drilling Capacity: 32 mm Speed Range: 65 - 1750 rpm Spindle Stroke: 160 mm Throat: 293 mm Column Diameter: 115 mm Motor Power: 1.1 kW Iaolhccqev Av Tmoler Features: - Machined base with T-slots - Emergency Stop Button - Drilling Depth Stop - Reversible Travel

Condition: used, Year of construction: 2003, Technical data: Cutting capacity round: 250 mm square: 250 x 300 mm max. bundle cut: 200 x 150 mm saw band dimensions: 34 x 1.1 x 3505 mm band speed, infinitely variable: 24 - 90 m/min table load: 1400 kg working height: 700 mm max. feed length per stroke: 370 mm saw band motor: 3.7 kW hydraulics: 0.75 kW coolant pump: 0.18 kW hydraulic oil tank: 98 l cutting fluid tank: 180 l weight, approx.: 1500 kg Ijlhccqev Akdgeljar equipment: - automatic material feed - coolant device - emergency stop button

Condition: excellent (used), Year of construction: 2021, Technical data: Tool holder: MK 2 Drilling capacity (E335/ST60): 20/23 mm Thread cutting capacity (depending on pitch): M12 Speed range: 40 - 4000 rpm Spindle stroke: 100 mm Table size: 340 x 280 mm Throw: 240 mm Iajlhcsvzyd Hscqlsr Column diameter: 82 mm Motor power 1.5 kW Connection: 400 V Weight, approx.: 130 kg Dimensions (WxDxH), approx.: 500 x 740 x 1100 mm Without workshop trolley Equipment: - Machined base with T-slots - Continuous speed adjustment - LED machine light - Thread cutting device - Emergency stop button - Drilling depth stop - Digital speed display - Gear chuck 3-16, brand: Röhm - CE

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Ioljvzmtzshccqljar Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: used, enninger high-speed milling spindle SK40 Type 801 M326 Ratio: 1:6 Iajlhevyg A Tjccqljr Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm without collets

Condition: used, Henninger high-speed milling spindle SK 40 Ijlhcjvygziscqloar Type 801 H580 Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm without collets

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Max. speed: 12,000 rpm Iaolhccjvygxneqler Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm With 14 collets Clamping range 2 - 15 mm