Condition: used, Year of construction: 1979, taper MK MK5 round table ja weight of the machine ca. 1.200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Dcob Exp Tjf Ek Rijksg +++++

Condition: used, Functionality: fully functional, Older Automatic saw, works well. it cut 0/60 degrees Deb Exp Tjwhka Rekscg

Year of construction: 2011, Condition: ready for operation (used), Control Unit Brand HURCO Model Ultimax Main Drive Dcsb Expovxbraj Tkeg Spindle speed range 4800 rpm Spindle motor power 11.2 kW Number of axis 3 Movement X-Axis Movement 203.2 mm Z-Axis Movement 508 mm This Hurco TM8 was manufactured in 2011. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for workshops looking to enhance their turning capabilities. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE Dcjb Expjwgan Us Tksg 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Year of construction: 2008, Condition: used, Technical data See pictures. Dobsvz H Hbs Exp Tkscg

Condition: used, Year of construction: 2014, DMC DL 80V CNC vertical lathe Dob Ejvr Ecpjxp Tkjcg Year of manufacture: 2014 800 mm turning diameter 750 mm turning length 30 kw 2000 rpm spindle 12-position turret 21" chuck Fanuc Oi-Td control Machine weight 9800 kg With chip conveyor and standard accessories

Condition: used, Year of construction: 1999, band width 221 mm length in total 1.000 mm weight of the machine ca. 300 kg Dob Exewf Et Hop Tkecg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Functionality: fully functional, load capacity: 5,000 kg, Equipment: rotational speed infinitely variable, Used Esab welding roller/manipulator working good. 5000 kg. for each roller Dcob Eswhiugexp Tkeg

Year of construction: 2015, Condition: ready for operation (used), General Data Measurements width 2440 mm Dcob Exp Tjvp Suaokeg Measurements depth 6642 mm Measurements height 2060 mm Machine weight 11000 kg Control Unit Brand FANUC Model 32i control Main Drive Spindle speed range 2000 rpm Spindle motor power 26 kW (Gearbox) Additional Equipment Turret Positions: 10 station This DOOSAN Puma 400LB was manufactured in 2015. A robust horizontal turning machine featuring a FANUC 32i control, it has a chuck size of 381mm and a bar capacity of 117mm. The machine offers a maximum cutting diameter of 550mm and a length of 2093mm. With a 10 station turret and rapid feedrates of X x Z: 16 x 18m/minute, it's ideal for efficient machining. Contact us for further details regarding this machine. Application Types Turning

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs EUR 118,436.00) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm bore capacity in steel 60 mm max.drill diameter 60 - 300 mm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Dcjb Exp Towgagdskjg Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Dceb Exp Tev N Di Aekjg Weight 13608.0 kg

Condition: good (used), Year of construction: 1988, Functionality: fully functional, Machine specifications: - Wet grinding unit (pump missing) - Swivel range (grinding arm) approx. 180° - Magnetic clamping plate 250 mm x 150 mm - Max. grinding length approx. 350 mm - Max. grinding width 150 mm - Max. installation height with / without magnet 150 mm / 210 mm - Grinding wheel diameter approx. 200 mm Dcobjqxac Ee Exp Tksg - Grinding wheel speed 2800 rpm - Drive 400 V / 1.85 kW - Space requirement approx. W 1000 x H 1600 x D 700 mm - Weight approx. 350 kg Without abrasives

Year of construction: 1970, Condition: used, Frömag A18 stroke 1.800 mm switchgear cabinet in 2000 neu weight of the machine ca. 7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Djb Expjffcu Ao Tkocg +++++

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, good well-maintained automatic saw that cuts 0/60 degrees. The saw has spray lubrication and everything works as it should. Dcobswhinye Exp Tkjg

Year of construction: 2008, Condition: ready for operation (used), General Data Measurements width 1675 Measurements depth 4080 Measurements height 1842 Machine weight 5200 Control Unit Brand FANUC Dcjb Exevxbtwep Tkeg Main Drive Spindle speed range 3000 Number of axis 2 Movement X-Axis Movement 240 mm Z-Axis Movement 600 mm Media Chip conveyor Yes This Yang ML-300 was manufactured in 2008. A reliable horizontal turning machine, it offers solid performance for your machining needs. Consider the opportunity to buy this Yang ML-300 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, diameter 42 - 80 mm length 350 - 520 mm tool adaptor MK4, MK5, MK6 12 twist drills, also available individually: 1 MK6, diameter 80 mm EUR 150.00 1 MK5, diameter 70 mm EUR 90.00 2 MK5, diameter 60 mm EUR 60.00 each 3 MK5, diameter 55 mm EUR 55.00 each 2 MK5, diameter 50 mm EUR 55.00 each 1 MK5, diameter 42 mm EUR 55.00 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 Dcjb Ejv Dxx Usxp Tkog plus VAT Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2009, Functionality: fully functional, 1 used automatic band saw Brand Amada Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Saw blade dimensions: 34 x 1.1 x 3505 mm Dcjb Eev T Tgljxp Tkeg Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Features: - Automatic material feed - Coolant system - Emergency stop button

Condition: used, Year of construction: 1980, thickness of jaw 130 mm weight of the machine ca. 24 kg +++++ Please note: Dcsb Eod N Slhjxp Tkjg The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2024, sheet width 1020 mm plate thickness 2,5 mm distance between columns 1045 mm daylight opening max. 47 mm bending angle max. 135 ° weight of the machine ca. 290 kg dimensions of the machine ca. 1,35 x 0,86 x 1,17 m Unused exhibition machine at a special price: Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. Dobowgn Amj Exp Tkecg This is an exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Year of construction: 1980, Condition: used, Diameter 360 mm Width 120 mm Dcjb Expsiqpy Uj Tksg Bore nicht schwenkbar mm milling head . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1964, Condition: used, serial number 23046 stroke 320 mm +++++ Dceb Eefgpdroxp Tksg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, table length 550 mm table width 550 mm table swivelabel +/- 90 ° no. of flutes 4 weight of the machine ca. 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Dcob Exp Tjgvi I Aokog +++++

Year of construction: 2005, Condition: used, tool adaptor 50 mm driven tools 5 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Djb Ejgtyhrjxp Tkscg

Condition: used, Year of construction: 1990, Control Heidenhain TNC 355 x-travel 1.000 mm y-travel 400 mm z-travel 450 mm surface area 1.300 x 400 mm feed range 1 - 6.000 mm/min number of spindle speeds 60 - 3.600 U/min vertikal number of spindle speeds 30 - 1.800 U/min horizonta spindle taper SK50 Deb Exjd N Sngep Tkscg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 51228, faceplate diameter: 1,400 mm, total height: 1,500 mm, rotational speed (max.): 315 rpm, Stock number 2052-06921 Machine type: Vertical Turret Lathe - Single Column Make: DöRRIES-SCHARMAN Type: VCE 1600/140 Year of manufacture: 1994 Condition: Used Control type: CNC Storage location: Schiefbahn Country of origin: Germany Dcob Expewf A Nre Tkjg Delivery time: Immediately after receipt of payment Freight basis: ex warehouse - free on truck Maximum swing diameter: 1750 mm