Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals Iijdpfxex E T Nps Ah Ujk Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, operating hours: 7,675 h, functionality: fully functional, machine/vehicle number: 1059027, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, torque: 122 Nm, controller manufacturer: Haas Automation, controller model: Haas CNC control 32 bit, workpiece length (max.): 1,321 mm, workpiece width (max.): 457 mm, workpiece height (max.): 635 mm, workpiece weight (max.): 1,588 kg, total height: 2,570 mm, total length: 3,330 mm, total width: 2,340 mm, table width: 495 mm, table height: 107 mm, table length: 1,321 mm, table load: 1,588 kg, overall weight: 5,316 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 667 h, coolant supply: 6.9 bar, spindle motor power: 22 W, spindle nose: CT-40/BT-40, number of spindles: 1, number of slots in tool magazine: 20, mount diameter: 89 mm, tool diameter: 89 mm, tool weight: 5 g, input voltage: 440 V, type of input current: three-phase, For Sale – Haas VF-4 Vertical Machining Centre (2007 Model) Iedsxu E Dzopfx Ah Uoik We are selling our 2007 Haas VF-4 CNC Vertical Machining Centre, a reliable and versatile machine that has been well maintained and is ready for immediate use.

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Iisdpfxeu Iukfj Ah Uek Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Type: 2H B Isdpfx Ahjx Ivpwe Uoik Without tools

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Iiedpoxcqi Eefx Ah Ujk Max bendingradius: 180°

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition having never been used. Available now.. Contact us for further information. Ijdpfoxy Iq Ujx Ah Usik

Condition: used, Year of construction: 2019, Dahlih MCH630 Horizontal Twin Pallet Machining Centre with Fanuc Series Oi-MF, Pallet Size 630 x 630mm, Travel (X/Y/Z) = 1000/850/800mm, B Axis = 1 deg Positioning, 6000rpm Spindle, Spindle Taper BT50, 60 Position ATC, max Table Load 1200kgs, Floor Space 4500 x 6230 x 3380mm, Machine Weight 18,000kgs. S/No. 3003020094 (2019) Iiedpox E Umpofx Ah Usk Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2007, turning diameter over cross slide: 370 mm, spindle bore: 104 mm, turning length: 2,000 mm, turning diameter: 554 mm, center width: 2,000 mm, turning diameter over bed slide: 554 mm, swing diameter over cross slide: 370 mm, turning diameter over top slide: 554 mm, spindle speed (max.): 2,000 rpm, total length: 4,100 mm, total width: 2,000 mm, total height: 1,750 mm, overall weight: 3,600 kg, rotational speed (max.): 2,000 rpm, Equipment: rotational speed infinitely variable, Centre distance: 2.000 mm Iisdpfjx Id Dcjx Ah Usk Swing: 554 mm over bed / 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2.000 rpm 3-jaw Chuck: Schunk Ø 350 mm Camlock Controller: GE Fanuc Featured with: - 1x Fixed steady Ø 245 mm (without base plate) - 1x Fixed steady Ø 390 mm (without base plate) - 18 Parat toolpost holders - Various jaws for chuck - Centre points - Cooling unit - Machine Manuals Country of origin: UK Motor power: 7,5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg

Condition: reconditioned (used), This is a Helitronic Vision CNC Tool and Cutter Grinding machine. The machine comes complete with Magnet filter separator and Transor filter system. It is HMC 600 control with Tool Studio 2.1 and Tool studio option step tool as well as WWM. It has electro static mist extraction and Kraft and Beyer fire extinguisher system. It also has Forflift loading system and Hydraulic Tail Stock. The machine will be fully cleaned and serviced. Iisdpfx Ajv Aba Eoh Usk

Condition: good (used), Year of construction: 1999, Used universal milling machine by Forthworth Model: U 500 SK 40 spindle taper Isdpox Ivn Tjfx Ah Ujik Heidenhain 2-axis digital readout Huron swiveling head

Condition: ready for operation (used), WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Ijdpox Imlcsfx Ah Ueik Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm

Condition: used, Year of construction: 2023, Dahlih DMX500 (4+1) Machining Centre with Fanuc Oi-MF Plus Control, Table Size 500mm (dia), Travel X/Y/Z=600/900/560mm, Max Spindle Speed 15000rpm, 40 Position ATC, 20 bar Through Spindle Coolant. S/No. 301302003 (2023) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Isdpex E Ulrsfx Ah Usik

Condition: good (used), functionality: fully functional, Year of construction: 2018, Full-option CNC press brake from Durma Model: AD S 40320 Capacity: 4100 x 320 tons Delem DA69 3D graphical control Iijdpfxox Ivnms Ah Usk Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC-controlled Wila hydraulic upper and lower clamping Wila crowning system Akas Fiessler laser safety Year of manufacture: 2018

Condition: ready for operation (used), Decoiling and rollforming line for manufacturing roof sandwich panels Max width of finished panel: 1000 mm PRODUCTION SPEED 7,30 meter per minute UP Floor 1 - Stam decoiler of 12 ton 2 - Memco embosser 3 - In-line profiling machine 4 - Sheet preheating DOWN Floor 1 - Stam decoiler of 12 ton 2 - Roll forming machine 3 - Sawing machine 4 - Pick and place for the insertion of sheets in the Stam production line, max panel length 18 meter 5 - Automatic machine for the overlapping of sheets 6 - Glue device 7 - Sheet preheating room 8 - PIR foaming gantry 9 - PIR dosing bench 10 - Siempelkamp 25 meter belt press 11 - Panels Cutting Machine (Flying Saw) 12 - Stacking unit for max panellength 16 meter 13 - Horizontal packing unit Iedpfox Imndox Ah Ueik Total length of the line from decoiler to stacking is 90 meters. The packing unit is located next to the stacking unit, panels are moved from the stacking unit with side conveyors.

Condition: used, Year of construction: 2017, Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iiedjx E Ukhspfx Ah Ujk

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Iiodpfx Ahex Iicwj Usk Model: Peddimaster 110/170 Punching capacity: 110 tons Shearing capacity: 170 tons Includes side stop and various tools

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 33 kW (44.87 HP), empty load weight: 20,000 kg, workpiece length (max.): 3,100 mm, throat depth: 150 mm, fully automatic shear, heavy duty shear for cutting high alloy steel, stainless steel with no torsion touchscreen CNC control: - cnc controlled backgauge - cnc controlled blade gap - cnc controlled cutting angle foldable backgauge TOP Belgian quality shear Strokes/min: 9 > 30 str/min Adjustable cutting device: 0,05 > 1,3 Adjustable cuttingedge: 0,2 > 2,5° Iiodox Imnkopfx Ah Usk Number of sheet holders: 16x

Condition: used, Year of construction: 2018, Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck at 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018) Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation on the website for supply and fitting and take this into consideration when bidding on this item. Iedpfx Ahjx E Ugvj Ujik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, power: 17 kW (23.11 HP), total length: 4,110 mm, total width: 2,070 mm, total height: 1,850 mm, empty load weight: 9,500 kg, workpiece length (max.): 3,100 mm, Digitale uitlezing voor achteraanslag Pneumatisch plaatondersteuningssysteem Beveiligingsscherm aan de achterkant Opvouwbare achteraanslag Ijdpjx Imlisfx Ah Usik Strokes/min: 12 > 45 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 - 2,5° High hold system: yes

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Isdpfx Ajx E Ubmoh Uoik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 300 mm, installation height: 450 mm, operating speed: 7 mm/s, reverse speed: 80 mm/s, total length: 4,400 mm, total width: 1,900 mm, total height: 2,900 mm, power: 18.7 kW (25.42 HP), travel distance Z-axis: 200 mm, empty load weight: 17,700 kg, passage width: 3,750 mm, 7 assen: Y1 / Y2 / X / R / Z1 / Z2 / V zware achteraanslag Capacity: 225 ton x 4300 mm Backgauge: CNC Locking speed: 80 mm/sec Iedpfox Iml Ajx Ah Ujik

Condition: used, Year of construction: 2011, Mazak Quick Turn Smart 200M with Mazatrol Smart Control, 215mm 2 Jaw Chuck, 12 Station ATC, Live Tooling, Powered Tail Stock, Travel X = 225mm, Z = 605mm, Swarf Conveyor (2011) Isdpfx Aex E Tzrjh Ujik Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Dimeco Straightener 500 x 3.5 mm Ijdpfxox Iml Ne Ah Ujik

Condition: ready for operation (used), controller manufacturer: NEW 2D Touch, throat depth: 355 mm, installation height: 366 mm, total length: 1,200 mm, total width: 1,650 mm, total height: 3,085 mm, power: 7.5 kW (10.20 HP), additional equipment features: yes, 3 axes: Y / X / R Capacity: 63 ton x 1200 mm Backgauge: CNC Iiedpfx Ahjx Imnwe Uok

Condition: ready for operation (used), controller manufacturer: Delem DA65W, throat depth: 410 mm, installation height: 450 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, total length: 4,980 mm, total width: 2,240 mm, total height: 2,840 mm, power: 11 kW (14.96 HP), travel distance Z-axis: 180 mm, empty load weight: 13,000 kg, passage width: 3,760 mm, table width: 180 mm, 7 axes: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada bombation Iiodpfjx Immtjx Ah Uek Capacity: 170 ton x 4230 mm Backgauge: CNC Locking speed: 100 mm/sec