Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws Dushjwgan Usx D I D Aot - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 51228, faceplate diameter: 1,400 mm, total height: 1,500 mm, rotational speed (max.): 315 rpm, Stock number 2052-06921 Machine type: Vertical Turret Lathe - Single Column Make: DöRRIES-SCHARMAN Type: VCE 1600/140 Year of manufacture: 1994 Condition: Used Control type: CNC Dushx D Iswf A Nre D Ajt Storage location: Schiefbahn Country of origin: Germany Delivery time: Immediately after receipt of payment Freight basis: ex warehouse - free on truck Maximum swing diameter: 1750 mm

Condition: used, Year of construction: 2014, DMC DL 80V CNC vertical lathe Year of manufacture: 2014 800 mm turning diameter 750 mm turning length 30 kw 2000 rpm spindle 12-position turret Dushx D Isvr Ecpo D Ajt 21" chuck Fanuc Oi-Td control Machine weight 9800 kg With chip conveyor and standard accessories

Condition: good (used), Year of construction: 1998, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain MillPlus, table width: 500 mm, table length: 700 mm, table load: 350 kg, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, The 5-axis DMG DECKEL MAHO DMU 70V eVolution is currently still in production and can also be viewed in operation by appointment at our customer. The machine was given a new spindle approx. 3 years ago! Comes standard with approx. 60 tool holders, excl. machine clamp as shown. Available from July 2025 (subject to delivery of new machine) Djhx Dowd Hkds I D Aout Total weight approx. 7000kg Dimensions:

Year of construction: 2008, Condition: used, Technical data See pictures. Dehx D Isvz H Hbs D Ajut

Condition: used, diameter 42 - 80 mm length 350 - 520 mm tool adaptor MK4, MK5, MK6 12 twist drills, also available individually: 1 MK6, diameter 80 mm EUR 150.00 1 MK5, diameter 70 mm EUR 90.00 Dehx D Ijv Dxx Us D Aout 2 MK5, diameter 60 mm EUR 60.00 each 3 MK5, diameter 55 mm EUR 55.00 each 2 MK5, diameter 50 mm EUR 55.00 each 1 MK5, diameter 42 mm EUR 55.00 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 plus VAT Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs EUR 118,436.00) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm Dushx D Iewgagdj D Ajt cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm bore capacity in steel 60 mm max.drill diameter 60 - 300 mm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: new, Functionality: fully functional, LTC offers drilling milling machines of its own brand. These are purchased directly from our own manufacturer. This allows us to deliver excellent quality at competitive prices. Our offer: Drill mill LTC BF 16 G Vario * Gear driven * Infinitely variable speed * Large table * 230V - MK2-M10 - drilling capacity 13mm * Base and digital readout optional Drill mill LTC BF 20 B Vario * With drive belt * 3-phase AC motor * Infinitely variable speed * Large table * 230V - MK3-M12 - drilling capacity 25mm * Base, automatic feed and digital readout optional Drill mill LTC BF 30 B Vario * With drive belt * 3-phase AC motor * Infinitely variable speed * Large table * 230V - MK3-M12 - drilling capacity 32mm Dujhjwhbuxox D I D Aet * Base, automatic feed and digital readout optional Drill mill LTC BF 32 G Vario * Gear switched (6 mechanical positions vario) * 3 Phase AC alternating current motor * 230V - MK3-M12 - drilling capacity 35mm * Digital readout * Base optional For more specifications, information and prices, please visit our site. Accessories and parts also available from stock. Inspection and demonstration by appointment without obligation possible.

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 31-44367, Gebr. Horizontal CNC machining center Make: HELLER Duehx D Ietq Tnmj D Aet Type: MC16 Year of manufacture: 2000 P/N: 31-44367

Condition: used, Year of construction: 1996, Alzmetall Säulenbohrmaschine Type AB35/S Loading 300 mm Dehxowd E T Ds D I D Asut Aufnahme MK-4 bj. 1996 Var. Geschwindigkeit. Kuhlung.

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Dushov N Di Asx D I D Ast Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: new, Year of construction: 2024, sheet width 1020 mm plate thickness 2,5 mm distance between columns 1045 mm daylight opening max. 47 mm bending angle max. 135 ° weight of the machine ca. 290 kg dimensions of the machine ca. 1,35 x 0,86 x 1,17 m Unused exhibition machine at a special price: Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. This is an exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m². Dohx D Iewgn Ams D Ajut

Year of construction: 1991, operating hours: 50,562 h, Condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik S3 Main Drive Number of axis 5 This 5-axis Peddinghaus TDK 1000/9E drilling machine was manufactured in 1991. Consider the opportunity to buy this Peddinghaus TDK 1000/9E drilling machine if you are looking to get high-quality drilling capabilities. Contact us for more information. Dujhowiahmex D I D Aot Application Types Other Machine Tools

Condition: excellent (used), Drawer cabinet with three telescopic drawers and doors width 550 mm depth 660 mm height 710 mm 1 drawer : Dueheit I Rhsx D I D Ajt 50 mm internal height 80 mm inner height 110 mm internal height 1 drawer

Condition: excellent (used), Year of construction: 2015, operating hours: 15,000 h, machine/vehicle number: GM4638/01-01, Give. CNC horizontal machining center Make: GROB Type: Truck rear axle machining center Duohxeq Ebbdo D I D Aot

Year of construction: 2019, Condition: excellent (used), SEMA Mechanical Engineering Type MT-40-C Dujhx D I Dswf R N Ho Aet Technology drilling Year of manufacture 2019 Control unit Siemens Sinumerik NCU 730.3BPN 840DSI Electrical capacity 210 KW Date of availability 05/2025 Weight 23 tons

Condition: good (used), Year of construction: 2009, Functionality: fully functional, 1 used automatic band saw Brand Amada Dehx Djv T Tgle I D Ajut Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Saw blade dimensions: 34 x 1.1 x 3505 mm Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Features: - Automatic material feed - Coolant system - Emergency stop button

Condition: refurbished (used), Year of construction: 1974, Functionality: fully functional, machine/vehicle number: 04.935, overall weight: 500 kg, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 2,000 rpm, power: 4 kW (5.44 HP), year of last overhaul: 2024, Equipment: rotational speed infinitely variable, Walther Trowal CLS 100 Revised in 2024 Can be seen fully working Dshx Dowhfcyo I D Aout

Condition: ready for operation (used), Year of construction: 2011, operating hours: 73,936 h, General Data Measurements width 7875 mm Measurements depth 6600 mm Measurements height 2230 mm Machine weight 13000 kg Control Unit Brand BOSCH Model CML45 Movement X-Axis Movement 2550 Y-Axis Movement 1270 Additional Equipment Number of protective tools: 18/2/1/ Number of clamps: 2/4 Dohjwiagpox D I D Aout This TRUMPF TruMatic 3000 Fiber was manufactured in 2011. Equipped with a 3000 W TruDisk 3001 laser, it offers a generous working range of 2550x1270 mm for both punching and laser operations. Capable of handling workpieces up to 120 kg and sheet thicknesses of 4.0/6.4 mm, it achieves a max punching force of 165 kN. With ample tool capacity, featuring 21 linear magazine slots, consider the opportunity to buy this TRUMPF TruMatic 3000 Fiber punch-laser combination machine. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), Used LZS lathe, Arad SN 601 Duehx Dewf N Eto I D Aet Turning diameter over bed: 610 mm Turning diameter in bed bridge: 830 mm Center distance: 1,500 mm Spindle bore: 110 mm 3rd jaw chuck: 315 mm Weight: approx. 3.3 t.

Condition: used, length in total 2000 / 2700 mm total power requirement 0,5 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 2,7 x 0,6 x 0,3 m Slide-in spiral conveyor Dushx Djulntmj I D Aot Suitable for GILDEMEISTER ASH 160, among others

Condition: good (used), Year of construction: 2008, Additional: Software and hardware enhancements: Two additional pneumatic connections on the table. (These can be controlled.) Y-axis extended from 500 mm to 570 mm Light and acoustic indicator at program end or interruption Additional rapid traverse switch on the control system Data transfer to the machine manufacturer possible Renishaw measuring probe with calibration program Shopmill enhancements. Software extension - kinematics Duehx D I Dowf R Ngs Aet Hydraulic clamp seals for A-C axes completely replaced 2 years ago (ssler) Spindles of the XY axes were replaced approximately 5 years ago. Main spindle completely re-bearing including new collet (2025) Original transport equipment is available Year of manufacture: End of 2008 Machine is in good condition FYI: Machine is used for the production of small to medium-sized system and molded parts.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Typ: Palatino 1530 Baujahr: 2012 Duehxjmx Rrls D I D Ast

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 780 mm Measurements depth 981 mm Measurements height 1802 mm Main Drive Laser type FIBER Movement X-Axis Movement 510 mm Y-Axis Movement 190 mm Additional Equipment Duohewiag Nox D I D Ast Laser beam sources: Wavelength 1065 +- 5nm, M²= 1.6, laser protection class 4 Scan head: galvanometer deflection unit, standard: plane field objective F-Theta 160mm, labelling field approx. 120x120mm Laser control interface: Ready for operation, laser start, marking finished, laser emission, emergency off, safety shutdown Cooling: Air-cooled Labelling software: Speedmark Options: Pilot laser 650mm /

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 2890 Duehx D I Dowiah Ts Ajt Measurements depth 2460 Measurements height 2185 Machine weight 1300 Main Drive Main motor power Total drive 5.0 kW, Saw motor 3.0 kW Additional Equipment Hydraulic material clamping Coolant system with 2 coolant nozzles Saw blade cleaning with easily replaceable plastic brush This Metal Band Saw was manufactured in 2009. It features a robust design with dimensions ranging up to 2460mm in length and 2185mm in height, and a total weight of approximately 1300 kg. The saw motor is powered by 3.0 kW, supporting a cutting speed from 20 to 110 m/min. It includes hydraulic material clamping and a coolant system with a 65-liter capacity. Ideal for handling material weights up to 400 kg/m. For more information about this Metal Band Saw, please reach out to us. Application Types Sawing