Condition: good (used), Year of construction: 2013, Max. cutting diameter 340mm, max. cutting length 400mm, 66mm Bar capacity, Spindle speed 4000rpm, spindle motor power 22kW, 12 Station Turret, parts catcher, FANUC 32i-Model A Control, 3 jaw chuck, coolant, swarf conveyor Gksdpfx As Ahy R Reansd

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 11903, grinding length: 5,200 mm, grinding wheel diameter: 660 mm, grinding diameter: 1,600 mm, grinding wheel width: 50 mm, spindle speed (max.): 30 rpm, spindle speed (min.): 5 rpm, Churchill Roll Grinder Swing 1600 mm Gkedexvrptopfx Aaned Centres 5200 mm Cambering Wheel Size 26” x 2” Roll speeds 5-30 rpm Bed and table were re-ground and not much use since so both are perfect.

Condition: used, Year of construction: 2020, CMS Athena 3015 5 Axis Machining Centre with OSAI Control. (2020) Traverses X Y Z; 3200 x 1500 x 900mm, B Axis -/+ 120 degrees, C Axis -/+ 370 degrees, Spindle Power 15Kw, Spindle Speed 24,000rpm, 8 Station Tool Change, Tool Size HSK63F. S/No. 9985, Machine Dimensions: 5800 x 2700 x 3350mm, Machine Weight: 7700kg Godpfe Ah Evbox Aanokd Location: These lots are located in Leicester, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Gkjdpfo Ah Hbcox Aanjd

Condition: used, Trotec Laser marking system / fiber laser marking system SpeedMarker 300 / SM300 S2 SpeedMarker FL 20 / 20 W Yb fiber laser Enclosed laser cabinet For sale is a used Trotec laser marking system for industrial marking and labeling applications. Technical data: Manufacturer: Trotec Laser Automation GmbH System type: SpeedMarker 300 / SM300 S2 Laser source: SpeedMarker FL 20 Laser type: Yb fiber laser Laser rated power: 20 W Wavelength: 1,050–1,090 nm Dimensions of the laser cabinet according to system-specific drawing: Width: approx. 559 mm Depth: approx. 806 mm Height: approx. 925 mm Weights according to a more recent manufacturer's data sheet (not confirmed for this system): Marking system incl. lens: approx. 65 kg Laser module: approx. 20 kg Laser PC / controller: approx. 9 kg Total weight with workstation: 120 Electrical data according to system documentation: Station: 230 V AC / 16 A / 50–60 Hz Station rated power: 1,500 W Laser source: 230 V AC / 2.1 A / 50–60 Hz Laser source rated power: 415 W Equipment: Gjdpfe Akdhajx Aanskd Enclosed laser cabinet with viewing window Pneumatically operated front door Laser control and laser PC Z-axis and rotary axis according to documentation Control panel with emergency stop and laser reset Safety shutter and door monitoring Exhaust connection / hose routing Workstation base as shown in the pictures Software / accessories according to the pictures: Trotec SpeedMark 3.9.3 on the PC SpeedMark software CD USB dongle "Trotec Gen4" License documents / JobControl certificate Other data carriers and documentation License status and transferability unchecked Application areas: Laser marking and component identification Metal marking / nameplates Serial numbers and industrial marking Condition: Used Optical condition according to the pictures. Scope of delivery: 1 × Trotec SpeedMarker 300 laser system With existing components as shown in the pictures. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via freight carrier possible by arrangement. Subject to changes, errors and prior sale. We will gladly answer any questions by telephone.

Condition: excellent (used), Year of construction: 1995, turning length: 20,500 mm, travel distance X-axis: 1,800 mm, travel distance Z-axis: 20,500 mm, spindle motor power: 131,000 W, rotational speed (max.): 445 rpm, total height: 3,200 mm, total length: 29,500 mm, total width: 4,000 mm, workpiece weight (max.): 35,000 kg, overall weight: 132,000 kg, Equipment: documentation/manual, 4 bed way construcion width 1800 mm 4 chuck 1200 mm rotation 445 Rpm Gkedpfs Aifrdox Aansd Baruffaldi TOEF 400 Turret  Axial    station Sk50 with 1580 Rpm and 18.3 kW Radial station Sk50 with 1580 Rpm and 18.3 kW   C-Axis 360.000 Positions Y-Axis + 5 mm to - 23 mm Measuring system: X Axis optical LS 107 Z Axis optical LB 326 Y Axis optical MT60K C Axis encode ROD 1850 Thread cutting ROD 1850   SIEMENS SINUMRIK  820T (4 Axis X, Y, Z and C) Linear interpolation Circular interpolation   Boring bar support for 150 x 1500 mm Steady rest C-Type 150 - 500 Load   8000 Kg Steady rest C-Type 400 - 850 Load   8000 Kg Steady rest RING    150 - 650 Load 10000 Kg DBC Turning Length: 20500mm Swing over bed Ø: 1800mm Swing over cross slide Ø:1600mm Spindle power: 131kW Bed width: 1800mm Tailstock spindle Ø: 300Ø Stroke pinole: 150mm Speeds / ranges: 1.8 - 445Rpm Feed rate X-Axis: 0 - 4000mm/min. Feed rate Z-Axis: 0 - 8000mm/min. Workpiece load: 35000 Length: 29500mm Width: 4000mm Height: 3200mm Weight: 132000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total height: 1,800 mm, total length: 12,000 mm, total width: 2,400 mm, Colour: Green Empty weight: 12.000 kg Price: On request - Drive system: Conventional - Model Planer: Movable table - Power [kW]: 12.0 - Number of axes [pcs.]: 4 - Rotary table: Yes - Tailstock center: Yes - Spindle diameter [mm]: 110 - Table length [mm]: 1000 - Table width [mm: 1120 - X-axis travel [mm]: 2400 - Y-axis travel [mm]: 2000 - Z-axis travel [mm]: 1800 - Tool holder: MK6 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 1800 - Max. workpiece weight [kg]: 4000 - Options: Boring head, Boring plate, Digital readout - Transport dimensions: 12000mm x 2400mm x 1800mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gksdpfx Aajz Hph Eoned Lukas van Rossum

Condition: new, 15000 kg height 790 - 1150 mm width 1200 mm ja 790 - 1150 mm 120 x 1200 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. Gedpfxsgvkaqe Aanjkd - powder-coated in RAL 5010 gentian blue - CE marking - Transport on request

Condition: new, 15000 kg height 790 - 1350 mm width 2000 mm Gkodpfel Sva Djx Aanjd ja 120 x 2000 mm

Condition: excellent (used), Year of construction: 2015, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, ARKU EdgeRacer ER 1500 D – Double-Sided Deburring and Edge Rounding Machine The ARKU EdgeRacer ER 1500 D is a high-performance industrial machine designed for automatic deburring and edge rounding of sheet metal components. Working width 1300 mm Thickness minimum 0,8 mm Thickness maximum 100 mm The machine processes both the upper and lower sides of metal parts simultaneously in a single pass, significantly reducing production time and manual finishing work. What is this machine used for? Removing sharp edges and burrs from laser-cut, plasma-cut and punched metal parts. Rounding internal and external edges for improved safety and surface quality. Preparing sheet metal components for painting, powder coating and further processing. Improving edge quality for welding and assembly. Processing steel, stainless steel and aluminium components. Finishing complex sheet metal parts with holes, slots and internal contours. Who is this machine interesting for? Laser cutting companies – Finishing laser-cut sheet metal parts quickly and efficiently. Sheet metal fabrication companies – Automatic deburring and edge rounding in production. Steel service centres – Processing large quantities of cut metal components. Stainless steel manufacturers – Producing smooth, safe edges on stainless steel parts. Automotive suppliers – Finishing precision sheet metal components. Machine builders – Preparing metal parts for assembly, welding and coating. Electrical cabinet manufacturers – Removing sharp edges from panels and enclosures. Subcontractors – Providing professional deburring services to industrial customers. Main advantages The major advantage of the EdgeRacer ER 1500 D is its double-sided processing technology. Unlike conventional deburring machines, which often require components to be turned over and processed twice, the EdgeRacer finishes both sides in one operation. Godpo Aigigofx Aanskd With a working width of 1,500 mm, the machine is particularly interesting for companies processing medium to large sheet metal components. Typical industries: Sheet metal fabrication, laser cutting, automotive, machinery manufacturing, metal construction, stainless steel processing and industrial subcontracting. Conclusion: The ARKU EdgeRacer ER 1500 D is especially attractive for professional sheet metal manufacturers looking to reduce manual labour, increase production capacity and achieve consistent, high-quality edge rounding on both sides of their components. Length:2300mm Width:2600mm Height:2500mm Weight:4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2016, total height: 2,500 mm, total length: 3,300 mm, total width: 2,700 mm, overall weight: 4,000 kg, ARKU - EdgeRacer slag removal and deburring machine MACH-ID 9899 Make: ARKU Type: EdgeRacer Gsdps Aignljfx Aanekd Control: ARKU YOP: 2016 Removes burrs after laser cutting, plasma cutting or punching. Prepares metal components for painting or powder coating. Reduces manual grinding and finishing costs. Processes both sides in one pass on suitable models. working width 1500 mm Minimum thickness 0,5 mm Maximum thickness 50 mm Feed rate 0,3 - 5 M/Min Minimum product size 380 x 50 mm The ARKU EdgeRacer is an industrial deburring and edge-rounding machine, mainly designed for companies processing sheet metal. Its main advantage is that it can process both sides of metal parts simultaneously, reducing manual grinding and handling. Length:3300mm Width:2700mm Height:2500mm Weight:4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Gksdpfsxhgfmjx Aanod Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, TRUMPF Femtosecond Laser System / Ultrafast Pulse Laser TruMicro 5070 Femto / TruMicro 5000 NEW / UNUSED – comprehensive laser system with system accessories For sale is a new and unused TRUMPF TruMicro 5070 Femto laser system with a TruMicro 5000 control/power unit and extensive accessories. The system was not used in production and comes from a project where the equipment was never put into operation. Technical data: Manufacturer: TRUMPF Laser GmbH Type: TruMicro 5070 Femto (FU06) Year of manufacture: 12/2018 Wavelength: 1030 nm Laser power: 300 W Pulse energy: 1.5 mJ Pulse duration: 0.3–15 ps Mains connection: 380–460 V / 3 AC + PE Frequency: 50/60 Hz Power consumption: 2.5 kW / 2.9 kVA Current consumption: 4.2 A at 400 V Gjdpfx Aajz I N Tkjnekd Protection class: IP54 Weight TruMicro 5070: approx. 380 kg Equipment: TRUMPF TruMicro 5070 Femto laser source TRUMPF TruMicro 5000 control/power unit Operator panel with emergency stop Industrial monitor TRUMPF control and electronics modules Beckhoff automation components Cognex component Optics and lens components Laser and light guide components Extensive power, control, signal and connection cables Pre-assembled connection cables Original TRUMPF documentation / manuals Further extensive accessories as shown in the pictures Application areas: Laser structuring Micromaterial processing Precision machining Industrial laser applications Research and development Scope of delivery: TRUMPF TruMicro 5070 Femto TruMicro 5000 control/power unit Control, electronics and optics components Cables, connection components and documentation Extensive accessories as shown in the pictures Condition: NEW / UNUSED NEVER USED IN PRODUCTION Storage and packaging marks may be present. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Hurco VMX 60 U 5 axes Vertical Machining Centre, new 2014. Used Hurco VMX60U 5-axis vertical machining centre, new in 2014. HURCO VMX 60UI, VERTICAL MACHINING CENTRE, Table 500mm diameter table, C axis - 360 deg. Capacity L x W x H X= 1524 Y=660 Z=520mm / A axis - 30/-110 deg, Spindle taper BT40, Spindle speeds 12000rpm, Feed rates 24m/min, Rapid traverse rates 32, 32, 24m/min, 40 station tool changer, CNC Control Hurco Ultimax CNC, Total Power HP/KW 18kW, Serial Number H-VX6011, Year 2014, Electrics 380-440/3/50, Overall size: 5455 x 4590 x3124mm, Weight:8.5 tons, Made in Taiwan High-performance CNC machining centre with simultaneous 5-axis capability, ideal for complex precision engineering and aerospace components. Available now. Hurco VMX60U 5-Axis Vertical Machining Centre Available for sale is this Hurco VMX60U 5-axis vertical machining centre, originally manufactured in 2014. Designed for high-precision and complex component production, the VMX60U combines the flexibility of simultaneous 5-axis machining with Hurco's renowned conversational programming and CNC control technology. Hurco VMX60U 5-Axis CNC Vertical Machining Centre for sale, manufactured in 2014. This high-specification machining centre is equipped for complex multi-axis machining applications across aerospace, precision engineering and subcontract manufacturing sectors. Ideal for subcontract engineering, aerospace, automotive, medical and precision manufacturing applications, the VMX60U enables efficient single-setup machining of intricate parts, reducing cycle times and improving accuracy. Gkedpfxe Aay Uce Aanjd The machine's universal swivelling spindle and integrated rotary table provide excellent access to complex workpieces, whilst maintaining the rigidity and reliability expected from the Hurco VMX series. Key Features Hurco VMX60U Vertical Machining Centre 5-Axis Machining Capability New in 2014 Simultaneous multi-axis machining Suitable for complex and high-precision components Ideal for aerospace, automotive and subcontract engineering sectors Hurco control system Stock Number: 113500 Located in the United Kingdom This used Hurco VMX60U CNC machining centre is available immediately. Contact Bowland Trading for pricing, availability and further technical information.

Condition: used, total length: 2,500 mm, total width: 1,900 mm, total height: 2,400 mm, Year of manufacture: 1956 Colour: Grey Empty weight: 2.500 kg Price: On request - Year: 1956 - Serial number: 38979 - Drive system: Conventional - Drive type: Eccentric Gkodpfx Aaj Ai S H Aenjd - Model: vertical - Power [kW]: 3.0 - Max. stroke [mm]: 250 - Max. reach [mm]: 420 - Table diameter [mm]: 440 - X-axis travel [mm]: 300 - Y-axis travel [mm]: 300 - Min. stroke speed [rpm]: 33 - Max. stroke speed [rpm]: 110 - Transport dimensions: 2500mm x 1900mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for wedge bar chucks, helical teeth, 2 sets -Jaw width: 22 mm Gjdpfx Aaj Ai A I Henokd -Dimensions: see photo technical drawing -Price/Fee: complete -Set dimensions: 95/65/H60 mm -Total weight: 1.9 kg/set

Condition: used, Year of construction: 2001, serial number 208892 control Siemens 611 Gkedpfxezf Nu Ee Aanod weight 6,3 t

Condition: used, total height: 2,050 mm, total width: 2,700 mm, total length: 2,500 mm, Year of manufacture: 2004 Colour: Beige Empty weight: 2.000 kg - Year: 2004 - CE marking present: Yes - Serial number: 200403001 - Drive system: Conventional - Horizontal/vertical: Horizontal - Power [kW]: 7.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1300 - Y-axis travel [mm]: 320 - Z-axis travel [mm]: 450 - B-axis rotation [°]: 350 - Table length [mm]: 1750 - Table width [mm]: 460 - Tool holder: ISO40 - Main spindle power [kW]: 7.5 - Min. spindle speed [rpm]: 30 Gjdpfx Aj Aiq Ecjanskd - Max. spindle speed [rpm]: 2050 - Options: Digital readout - └ Type of digital readout: Fagor - Transport dimensions: 2500mm x 2700mm x 2050mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,000 mm, total length: 2,400 mm, total width: 1,200 mm, Year of manufacture: 2024 Colour: Grey Empty weight: 800 kg Welding Table / Clamping Table - Drilled holes! - Diagonal grid! Dimensions: 2000x1000 - 2400x1200 - 3000x1500mm Tabletop thickness: 15 mm Hole diameter: 28 mm Price excludes accessories. Individual tools are also available. Standard Tool Set: - 4× 3D Angle 300 mm Gkedpfx Aae Ai E Dxsnsd - 6× Stop 150 mm - 6× Stop 225 mm - 1× Protractor - 2× Prism - 1× Eccentric Clamp - 1× Flat Angle - 12× Clamping Bolt - 12× Clamping Clamp - Year: 2024 - Model: Hardened metal - Table length [mm]: 2400 - Table width [mm]: 1200 - Table top thickness [mm]: 15 - Options: Drilled holes, Clamping grid, Diagonal grid, Adjustable working height - └ Hole diameter [mm]: 28 - Transport dimensions: 2400mm x 1200mm x 1000mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 5,350 mm, total width: 1,720 mm, total height: 1,900 mm, Colour: Grey Empty weight: 7.500 kg Price: On request - Drive system: Conventional - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Carriage turning diameter [mm]: 900 - Distance between centres [mm]: 3000 - Bed width [mm]: 635 - Spindle bore [mm]: 90 - Min. spindle speed [rpm]: 9 - Max. spindle speed [rpm]: 500 - Options: Removable bed, Four-jaw chuck, Fixed steady - Transport dimensions: 5350mm x 1720mm x 1900mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Gjdpfxo Ai Ew Ss Aanjkd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Gjdex Hp Ikspfx Aanekd Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change turning tool holder -Type: Multifix bra 30130 Gsdpfs Aiup Ijx Aanjkd -Recording dimensions: see photos -Number: 3x steel holders available -Price: per piece -Dimensions: 130/55/H110 mm -Weight: 1.8 kg/pc.

Condition: good (used), Year of construction: 2009, Used vacuum lifting device from FREZER (Germany) Type: 3.21.1.0600 Gkodpfo Ai Dqvex Aanjd Capacity: 1000 kg at 70% Year of manufacture: 2009

Condition: good (used), Used Donewell plate shear Godpfx Aas Ai Dc Nenskd Type: 3 - 2500 Capacity: 2500 x 3 mm The machine is in working order and is being sold as is, directly from the workshop.

Condition: excellent (used), HAAS TR310 TRUNNION TABLE EXELENT CONDITION TESTED CAN BE SHOWN WORKING Godpfxjnp Iyho Aanjkd