Condition: like new (used), amount 39 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, Various broaches in a complete package, with cabinet. Fgjlqzkneu A I A Dsaob Quantity= 39 pcs. Unit price per piece = 140,00€ / per piece Complete purchase with cabinet = 120,00€ / per piece

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, Press force: 4,000 kN Table: 1,800 x 1,550 mm (5 steps of 300 mm) Ram: 1,800 x 1,350 mm Ram adjustment: 200 mm Folswhd S Tjqzknaogb Ram stroke: 250 mm Max. installation height: 600 mm (tool height should be 590 +/- 5 mm) Min. installation height: 400 mm Coil inlet height: 300 mm Transport height: 300 mm Table equipment: Die cushions: 5 individually adjustable, uncontrolled Die cushion force: 120 kN at 16.0 bar Die cushion travel: 120 mm Ram equipment: 5 individually adjustable, uncontrolled Ejector force: 80 kN at 16.0 bar Ejector travel: 120 mm Upstream Coiling system Maximum coil width: 500 mm (450 mm) Maximum coil thickness: 3.5 mm Material cross-section: 1200 mm² for the straightening system Maximum coil weight: 6000 kg Gripper system: 5 between the stages

Condition: used, Year of construction: 2004, Max. machining dia. 20 mm Max. machining length 200 mm Max. spindle speed 200-10.000 rpm Spindle bore 24 mm Max. spindle speed (back spindle) 10.000 rpm Main spindle indexing 1 degree. No. of axis 8 pcs. Control: Mitsubishi/Meld 635 LC Equipped with: 6 pcs. rotary tools Fslev Efppoqzknaogb Magazine bar feeder Chip conceyor No tool holders comes along

Year of construction: 2025, Condition: used, machine/vehicle number: 1153, Shaft measuring machine, Manufacturer: CARL MAHR, Type: MarShaft SCOPE 250 Plus, Year of manufacture: 2016, Serial No.: 1153, with bearing, C-axis PC DELL Optiplex XE3, Intel Core i5, keyboard and mouse Fgolqzjwh Txvoknajb

Condition: good (used), Year of construction: 2014, Functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, torque: 214 Nm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, Available: Hurco VMX30i CNC milling machine, well-maintained and in very good condition. With only 4817 spindle hours, this machine offers reliable performance and precision. • Internal cooling • Air true nozzles • V10 software • Chip conveyor • Spindle cooler • 3D-Software (Swept surface & 3D Mold) • DXF-Software • Tool change optimization software • Ultimonitor-Software The machine and coolant tanks have been thoroughly cleaned. Inspection under power is possible, and the machine is ready for immediate delivery. We have two pieces in stock one with 40-fold tool changer and one with the normal tool changer but with internal coolant. Please contact us for further information or to arrange a viewing. Fgelqzewgwicsknajb We are the official distributor for Hurco in the Benelux.

Condition: used, turning diameter over cross slide: 230 mm, turning diameter over bed slide: 380 mm, center height: 190 mm, center width: 1,270 mm, Center Lathe Manufacturer: Strojimport, Type TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Type: TK 380 x 1500 Year of Construction: Unknown Control: Conventional Center Distance: 1270 mm Turning Diameter over Bed: 380 mm Turning Diameter over slide 230 mm Center height 190 mm Spindle speed 45 – 2000 rpm Bed width / length / height 300 / 2120 / 305 mm Fgjlqzkjwgch Djnaeb Spindle bore 52 mm Dimensions: L 2.70 x W 1.00 x H 1.60 m Machine weight: 1200 kg Equipment - 3-axis digital readout - 3-jaw chuck with internal and external chucking - 2 live centers - 1 fixed center - 4 quick-change tool holders - 1 steady rest - 1 drill chuck - Machine feet All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1975, max. wheel diameter 400 mm gear width 290 mm max. module 6 min. module 0,5 weight 4,6 t voltage 220/380 V frequency 50 Hz dimensions 3010 x 1800 x 2200 mm total power requirement 17 kW Working area: Fgslqzknjul Em Rsaob 1. largest module to be milled 6 mm 2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm 3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3 Dimensions: 1. Ø of the workpiece table 400 mm 2. Ø of the table dimensions 80 mm 3. diameter of the workpiece mandrel 36 mm 4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm 5. diameter of the milling cutter arbour 32; 40 6. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm 7. drive cone for milling arbors MK 4 8. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mm Accessories: Interchangeable wheels

Condition: good (used), Clamping tower with 4 vices each with a double clamp Dimensions: 400x500x650mm (LxWxH) Fgslqzer T Nkfeknaob Quantity: 5 pieces Suitable base pallets for Heller MC 16 available

Year of construction: 2019, operating hours: 1,574 h, Condition: ready for operation (used), General Data Measurements width 1780 mm Fslqzkowf Smmsnajgb Measurements depth 2800 mm Measurements height 1850 mm Machine weight 4400 kg Control Unit Brand FANUC Main Drive Number of spindles 2 Media Chip conveyor Yes Additional Equipment Manual tool measuring arm Part-catcher Bar-feeder interface Number of Tool Stations: 12 / Shank Diameter According to DIN 69880: 30 mm / Number of Driven Tools: 12 / Maximum Speed: Up to 5000 rpm / Maximum Power (40% DC): 5.65 kW Pneumatic workpiece ejection device. / Tool monitoring system (Fanuc). / Tool monitoring system (Fanuc). / Direct measuring system for X/Y axes. / High-pressure pump (12 bar). / Manual tool measuring probe (MARPOSS). / Bar package and bar interface. Chip conveyor with side discharge. This DMG MORI CLX 350 V6 was manufactured in 2019. A horizontal turning machine with subspindle, featuring a Fanuc controller, Ø210 and Ø175 chucks, a manual tool measuring arm, part-catcher, and bar-feeder interface. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 350 V6 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Fgelqzkjwfynfenasb Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: good (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, torque: 214 Nm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, Available: Hurco VMX30i CNC milling machine, well-maintained and in very good condition. With only 3458 spindle hours, this machine offers reliable performance and precision. • 40-fold tool changer • Air true Spindle • V10 software • 3D-Software • Tool change optimization software • Chip conveyor • Spindle cooler The machine and coolant tanks have been thoroughly cleaned. Inspection under power is possible, and the machine is ready for immediate delivery. Fgjlqzknowgwhrsaob Please contact us for further information or to arrange a viewing.

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter Fjlqzknsv Tah Aeasgb

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Folqzeul El Tjknaogb Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: refurbished (used), Year of construction: 2005, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Folqzknothgidoaogb Model Amada HFE 130-3 downstroke CNC Press brake Year 2005 hours 9000 Tonnage 1300 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. Folqowabhpezknaogb ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: new, saw blade diameter: 400 mm, – 400 mm saw blade – Double miter – 4 pneumatic collets – Automatic safety guard – Mist lubrication system – 1 x 300 cm roller conveyor with length stop – Front door for easy saw blade changes – Air gun – Safety guard – Documentation – 400 V Fgelswg Sm Aeqzknaob

Condition: used, Year of construction: 1978, HEIDENREICH & HARBECK Hanseat 640 Lathe (Equi 62214) Fgslqzkewfifgsnaob Machine Data Manufacturer: Heidenreich & Harbeck Model: Hanseat 640 Year of Manufacture: 1978 Centre Width: 3 m Crane for loading operations available Material No.: 10342404 Note: This is a starting price. The sale will be conducted via an online auction against the highest bid (plus buyer's premium and VAT). Please follow the link for further information and photos of this lot.

Condition: used, turning diameter 430 mm Fgjlqzknowg Htkjaeb turning length 1000 mm control Okuma OSP5020L weight of the machine ca. 5900 kg

Condition: good (used), Year of construction: 1975, tool taper MK4 diameter of tools max. Ø 145 mm table-size L: 800 x B: 700 mm surface area Ø 300 mm table travel 200 mm indexing max 5 Modul total power requirement 7,5 kW weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 1,5 x 2,3 m Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° Fgjlqzkju Imbvjnaeb -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)

Condition: new, pressing force: 100 t, cylinder stroke: 300 mm, – Capacity 100 tons Fgolqzewg Smieknaeb – Cylinder stroke 300 mm – Working width 1070 mm – 2 speeds – With V-blocks/pressure plates – Pressure gauge – Emergency stop – Documentation – 400 V

Condition: used, Year of construction: 1978, HEIDENREICH & HARBECK Hanseat 640 Lathe (Equi 62214) Machine Data Manufacturer: Heidenreich & Harbeck Felqzkowfifajnajgb Model: Hanseat 640 Year of Manufacture: 1978 Centre Width: 2 m Crane for loading operations available Material No.: 10342422 Note: This is a starting price. The sale will be conducted via an online auction against the highest bid (plus buyer's premium and VAT). Please follow the link for further information and photos of this lot.

Condition: good (used), Year of construction: 1977, workpiece dia. x mm control x table dimensions x mm weight of the machine ca. x t Feljul Egqsqzknasgb dimensions of the machine ca. x m

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Fjlqzstycg Sjknasgb Year of construction: Approx. 1981

Condition: good (used), Year of construction: 1975, max. wheel diameter 400 mm gear width 290 mm max. module 6 Fgslqzkjugawxenaeb min. module 0,5 weight 4,6 t total power requirement 17 kW Working area: 1. largest module to be milled 6 mm 2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm 3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3 Dimensions: 1. Ø of the workpiece table 400 mm 2. Ø of the table dimensions 80 mm 3. diameter of the workpiece mandrel 36 mm 4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm 5. diameter of the milling cutter arbour 32; 40 6. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm 7. drive cone for milling arbors MK 4 8. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mm

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm Fgolqsucphxezknaob total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown