Condition: excellent (used), Year of construction: 2006, XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2006 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Ce Ia Sbovw S T Eslborb Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #78877 Machine Serial Number: 10625 Cost: £15,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2004, Condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 3000 mm Cre Iaewanpmo Sblbsb Measurements height 2000 mm Machine weight 3000 kg Control Unit Brand FAGOR Model 8055 FL Main Drive Spindle speed range 4500 Spindle bore 65 mm Workpiece Workpiece drm over bed 475 mm Additional Equipment Filtermist Unit 3-jaw chuck This MICROCUT Challenger BNC-1840 was manufactured in 2004. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this MICROCUT Challenger BNC-1840 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2007, Used 2007 Mori Seiki NH 5000- DCG 4-Axis Horizontal Machining Centre with MSX701- iii control, CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing, in super condition with 17,000 hours cutting time recorded. Very accurate and well maintained by DMG since new machine having spent its life in a 1st Tier Aerospace sub-contractor. Axis X 730 mm Axis Y 560 mm Axis Z 629.9 mm Control MORIC MSX-701II B Axis- Yes Table length 500 mm Table width 500 mm Max. part weight 499.1 kg Number of tool pockets 60 Spindle taper CAT 40 Max. spindle speed 14000 rpm Spindle motor power 18.6 Kw Length x width x height 2349.5 × 2311.4 × 2616.2 Weight 9582.6 kg Stock number: cmj/0203 Cre Ia Sjvkwlgsblbob Control: MORI MSX-701-iii Accessories: CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing Name of the machine: Mori Seiki NH 5000 DCG / 40 No of pallets: 2

Condition: excellent (used), Year of construction: 2015, Traverses X Y Z; 1020 x 610 x 610mm, Table size 1200 x 600mm, Table load 700Kgs, Table to spindle 100-710mm Cro Iswfg Npoa Sblbsb Spindle taper BT40, Spindle speed 12,000rpm, spindle motor 18.5KW, 30 station ATC, Heidenhain TNC640, through spindle coolant, swarf conveyor

Condition: used, Year of construction: 2012, XYZ SLX425X 1,250 CNC Lathe. S/No. L522 (2012) with Prototrak SLX Control. Country of Origin: United Kingdom Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Cj Ia Sewhn Sweblbjrb

Condition: used, Year of construction: 2000, YMC SUPERMAX V65A VERTICAL MACHINING CENTRE MAKE SUPERMAX, MADE IN TAIWAN MODEL V65A YEAR 2000 CONTROL FANUC OM (ALPHA DRIVES) TABLE SIZE 840.0 mm x 420.0 mm TRAVERSES (XYZ) 650.0 mm x 410.0 mm x 615.0 mm SPINDLE SPEED 6,000 rpm SPINDLE TAPER BT 40 / CAT 40 SPINDLE NOSE 730.0 mm SPINDLE MOTOR 5.5 / 7.5 kW ATC 16 STATIONS ATC TYPE UMBRELLA PLUS 4TH AXIS UNIT Ce Iaowd Ra As Sblbsrb COOLANT SYSTEM SET OF MANUALS

Condition: excellent (used), Year of construction: 2022, XYZ 1530VS Gap Bed Centre Lathe 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine) Manufactured & Installed 2022 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 30mm Cross Slide Travel 230mm Crj Ia Sbjv Uyfqelbjb Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #78884 Machine Serial Number: 11008213 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Brand: TOPPER Type: TNL 100 ALSB Year of build: 2002 Serial number: 11326 Turning Ø: 420 mm Turning length: 400 mm Spindle boring Ø: 51 mm Speed till n=: 4500 rpm Coolant pump: true Chip conveyor: true CNC control, brand, type: Fanuc series 18i-T Engine power (kW): 15 kW Electric connection: 380 V Machine weight: 6500 kg Dimension l: 4200 mm Dimension w: 1800 mm Dimension h: 2100 mm Cs Ia Sbjwfyn Sjlbjrb

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 42L09420, Hankook Protec 9NC x 5000 CNC Lathe with Fanuc 32i Control and large spindle bore. MACHINE CONSTRUCTION & FEATURES  Heavy One Piece Cast Iron Bed Construction  Heavy Duty Hardened & Ground Solid Slideways  2 Step manual Gear Change  Heavy Duty Tailstock MACHINE CAPACITIES Swing Over Bed Ø 950 mm Swing Over Carriage Ø 630 mm Chuck Size Dia. Ø 32” Distance Between Centres 5000 mm Load Capacity Between Centres 5000 Kgs SPINDLE Speed 2 -630 Rpm Spindle Bore Ø 254 mm Spindle Nose A2-15” Speed Range Manual 2 Step Centre taper MT #6 Carriage Toolpost Automatic V8 Tool Size 32 x 32 mm X Axis Travel 535 mm Z Axis Travel 4845 mm X Axis Rapid 4 M/min Z Axis Rapid 6 M/min TAILSTOCK Quill Diameter Ø 180mm Spindle Taper MT #6 Max Quill Travel 250 mm BED Width 630 mm Length 6715 mm MOTORS Spindle 30/37 Kw Feed X 1.8 Kw Z 4.2 Kw POWER SUPPLY Electrical Supply 415V, 3Ph, 50Hz DIMENSIONS & WEIGHT Length 7470 mm Width 2205 mm Height 1890 mm Weight 10280 Kgs STANDARD MACHINE FEATURES • Fanuc 32i-A CNC Controller • Centre MT #6 • 4 Jaw Independent chuck • Automatic Spindle Shifting • Built in Live Tailstock Spindle • Coolant System • 2 Speed Tailstock Spindle • Work Light • Main Drive Motor & Elect equipment • Centre Sleeve • Chuck Cover Full Rear Guard 5000 between Centres 4-Jaw Independent Chuck & Flange Φ32" (Bore Ø254mm) 4-Jaw Independent Chuck & Flange Φ32" (Bore Ø254mm) Steady Rest(Roller Jaw) Φ250mm - Φ450mm Steady Rest (Roller Jaw) Φ450mm - Φ650mm Live Centre MT #6 Automatic Index Turret Electric V8 in lieu of manual H-4 3 Off OD Tool Holders 3 Off Boring Tool Holders Φ63mm 2 Off Facing Tool Holders Boring Bar Device Ø 150mm (Bar Excluded) Chip Conveyor 5000 Mm Transformer CE Specification Spindle Motor Upgrade 30/37 Kw Fanuc Option A (as detailed below) 1st Spindle Orientation Dynamic Graphic Display Continuous Threading Custom Macro B Extended Part Program Edit Tape Memory 320M Inch/Metric Conversion Manual Guide i Playback Cj Iaewcq Tmo Sblberb Programmable Data Input Run Hours & Parts Counter Tool Offsets 32 Pairs Variable Lead Threading Graphic Function Spindle Positioning Program Restart External Data Input

Condition: excellent (used), Year of construction: 2018, operating hours: 6,019 h, XYZ: 350 x 440 x 330mm, 320mm diameter table, Maximum workpiece diameter 320mm, Co Ijwfgnlsa Sblborb maximum workpiece height 265mm, Maximum table load 100Kgs, A axis -/+ 115 degrees, spindle speed 18,000rpm, 36 station tool changer, Heidenhain TNC 640, swarf conveyor, high pressure coolant

Condition: used, Year of construction: 2007, Haas TL-2CE CNC Lathe. S/No. 3080208 (2007) with Haas CNC Control, 300mm 3 Jaw Chuck, Tailstock. Country of Origin: U.S.A Cro Ia Sbjwhn Ryelbjb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2005, operating hours: 1,000 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 401, This machine has got very little use as it was used as a backup saw. It has been taken out of the production line as we needed the space for a new Schirmer machining center. This Rapid DGL functions as new and is ready for shipment if sold. We have the necessary equipment required to load onto a truck if required. Cj Iewgygwsa Sblbjrb

Condition: good (used), Year of construction: 1996, Harrison M550 Gap Bed Centre Lathe Max’ Distance Between Centres 3000mm Max Swing over Bed 550mm Max’ Swing over Gap 830mm Spindle Bore 104mm Spindle Speeds 18– 1400 rev/min Spindle Motor 11Kw. Tailstock MT5 Manufactured 1996 Supplied with: 3 Jaw Chuck Crs Ia Sbeuy T Dbelbjb 4 Jaw Chuck 3 Point Fixed Steady Quick Change Tool Post For sale with Jet Machinery Ltd Jet Machinery Stock No: #78822 Machine Serial Number: 5M0048 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: used, Functionality: fully functional, machine/vehicle number: M26043, total height: 3,000 mm, total length: 2,000 mm, Equipment: adjustable boom, Lincoln Electric column & boom, manual height adjustment with articulated boom. Comes with TIG torch and leads. Crj Iaowg Tm De Sblbsb

Condition: not inspected (used), Amada Astro 100 NT, HSD 1030 Crj Iswa Siqoa Sblbjb AVAILABLE FOR SPARES

Condition: used, Year of construction: 2007, Hurco TM8 CNC Lathe. S/No. TM8-01111057AAA (2007) with Winmax Control, Collet Chuck, Tooleye, Parts Catcher, 12 Station Turret, Tailstock, Swarf Conveyor, Multi-feed, Bar Feed Crj Iaowhn Nps Sblbeb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm Tailstock 10” Chuck Swarf Conveyor Mist Extraction Cj Ia Sbsukgbtelborb Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2017, Hurco TM6i CNC Lathe. S/No. ST6-16101AZEAAAH (2017) with Minmax Lathe Control, 200mm Diameter 3 Jaw Chuck, Tooleye, Parts Catcher, 12 Station Turret, Hydraulic Tailstock, Swarf Conveyor, Hydrafeed Multi-feed 35 Barfeed Cs Ia Sbswhn Huelbsrb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Norton 50T Downstroke Plate Frame Hydraulic Press • Press height 2750mm including pipework • Press Weight 1100Kgs • Max Press Load 50T • Max Hydraulic Pressure 428Kgs/cm2 • Ram Stroke Adjustable 610mm Max • Bed Height 762mm to Face of Bolster • Bed Area 610mm l-r x 406mm b-f • Oil Tank Capacity 70 lt. • Electric Motor Size 7.5Hp • Electrical Supply 415v 3 Phase • Overall Size Of press Unit 740 x 550 x 2750mm (WDH) • Ram End is 105mm Dia Plain End. Supplied with: • Machine Handbooks • *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78800 Co Ia Sbljulizleberb Machine Serial Number: Not Visible Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2004, Haas VF-2DHE Vertical Machining Centre. S/No. 34618 (2004), 24 Position ATC, Table Size 915 x 355mm, SK40 Taper. Country of Origin: U.S.A. Cro Ia Sewhn Edjblbob This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2008, Hurco VMX30M Vertical Machining Centre. S/No. S342-06119078DJA (2008) with Max Control, Table Size 1020 x 510mm Cro Ia Sjwhn Aioblbeb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2011, Hurco VMX30M Vertical Machining Centre. S/No. S342-16102081DJA (2011) Co Ia Sbljwhn Acebsrb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2017, Hurco VM5i Vertical Machining Centre. S/No. S5-1610487CKLAH (2017) with Minmax Mill Control, 16 Position ATC, Table Size 455 x 355mm, 10k Spindle, Spindle Taper SK40 Crs Iewhnz Eea Sblbsb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2016, Hurco VMX30Mi Vertical Machining Centre. S/No. S343S-160466JKAAH (2016) with Winmax Mill Control, 30 Position ATC 10K Spindle, Spindle Taper SK40, Table Size 1020 x 510mm, Swarf Conveyor Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Crj Iowhnzlja Sblbjb

Condition: used, Year of construction: 2019, Hurco VM30i Vertical Machining Centre. S/No. S3014106919FKAAH (2019) Winmax Mill Control, 10K Spindle, 20 Position ATC, Spindle Taper SK40, Swarf Conveyor, Table Size 1320 x 510mm Ce Iewhnrqja Sblbjrb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.