Condition: used, Swivel bending machine FASTI Type 2095-25-2,5 Serial no. 94 295 004 Year of construction 1994 effective length 2540 mm max. sheet thickness 2.5 mm Stroke of upper beam 380 mm Motor power bending beam 2.2 kW Mains connection 400 Volt, 50 Hz - NC control FASTImatic FM100 - One-piece 135° pointed rail - Controlled backgauge - Continuous stop rail - controlled bending angle via control unit Gisdpjttc Uaefx Adbep - electric foot switch weight 3000 kg good condition

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm Godpfxerz Tutj Adbeip - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Price: On request Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 70 - Notching width [mm]: 250 Gsdpfsw Ryxmsx Adboip - Max. plate thickness notching [mm]: 6 - Round bar cutting capacity [mm]: 45 - Shearing width [mm]: 450 - Max. plate thickness shearing [mm]: 15 - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, plate thickness 4 mm Giedpfx Ajvy Iklsdbsp plate length 200 mm total power requirement 3 kW weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m

Condition: ready for operation (used), Year of construction: 2020, controller manufacturer: DELEM, controller model: DA-66T, number of axes: 4, overall weight: 23,500 kg, total height: 3,470 mm, This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information. Additional equipment • Control Console: Double footswitch console Machine Benefits Technical Machine Benefits • Machine in excellent condition, with very low working hours – practically like new • Some tools are included in the offer • Stroke axes: Y1–Y2 cnc controlled Gjdpfxox D Nu As Adbsip • Backgauge x range: 1000 mm • Backgauge fingers: 2 pcs • Stroke length: 330 mm Extra Information Tools Upper Tool Weight: 700 kg Lower Tool Weight: 1200 kg Clamping System: Heavy duty top clamping system Tooling System: European clamping system with 85° sectioned punch and 4-V die Crowning: CNC crowning on bottom table Front Support Arms: 2 pcs on linear rail Safety: Electrically interlocked side guards, light barriers Dimensions Machine Depth 4100 mm Technical Specification Bending Length 3100 mm

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: FANUC, controller model: 18-P, This CNC punching machine was manufactured in 2001. It features a working area of 1525 x 2000 mm and includes a total of 57 stations, with various configurations for different applications. Consider the opportunity to buy this AMADA's Vipros king CNC punching machine. Contact us for further details. • Working area: 1525 x 2000 mm • Turret: 57 stations total Gsdpfjyitccjx Adbsip • 23 A stations • 26 B stations • 4 C stations • 2 D stations • 2 E stations • 2 x index table

Condition: ready for operation (used), Year of construction: 2011, table width: 3,050 mm, total height: 3,005 mm, product length (max.): 8,388 mm, This 3-axis Prima Industrie Platino 1530 was manufactured in 2011. It features a working area of 3000 x 1500 mm and is equipped with a CO₂ laser with a power class of approximately 3000 W. The machine has a total length of about 8,388 mm and a width of approximately 3,050 mm. If you are looking to get high-quality laser cutting capabilities, consider the Prima Industrie Platino 1530 CO₂ laser cutting machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Current: 53 A • Frequency: 50 Hz • Laser type: CO₂ laser Gsdjynk A Rjpfx Adboip • Laser power class: approx. 3000 W • Laser ON time: 56739 h • HV ON time: 52613 h • Beam ON time: 38740 h • Shutter open time: 39057 h • Shutter cycle counter: 226839 • Vacuum pump ON time: 56729 h • Vacuum pump oil change time counter: 718 h • Turbine ON time: 14118 h • Turbine maintenance time counter: 5157 h

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min • Maximum iron thickness: 25 mm Godpeym A Hrofx Adbjip • Maximum stainless steel thickness: 25 mm • Maximum aluminum thickness: 15 mm Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,740 h, number of axes: 2, pressing force: 14 t, Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details. • Operating hours: 2740 • Distance between uprights: 2700 mm • Throat depth: 415 mm • Max distance ram/table: 390 mm • Programmable stroke: 160 mm • Backgauge with ball screw, stroke: 800 mm • CNC control: ESTUN E21, 2-axis (controls bending dimensions and backgauge) • Condition: Very good Giodoyrb Sqopfx Adbjp Additional equipment • Quick clamping tool holder • Bending punch: 120 mm height, 88° angle, segmented • Multi-V die: 95 × 95 mm, V openings 10/12/16/20/25/30/48/60 mm • 2 backgauge fingers with micrometric adjustment and manual spacing • 2 adjustable front supports • Safety light curtains • LED work area lighting • User manual, electrical and hydraulic diagrams Technical Specification Bending Length 3200 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,915 h, number of axes: 5, travel distance X-axis: 600 mm, overall weight: 15,000 kg, total height: 3,000 mm, travel distance Z-axis: 1,900 mm, pressing force: 255 t, product length (max.): 4,100 mm, This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine. • Units available: 2x similar units • Standard stroke [S]: 265 mm • Open height [D]: 550 mm • Distance between side frames: 2750 mm • Throat depth [T]: 400 mm • Table width: 60 mm • Max. backgauge range in X (2/4/5 axes): 1050 mm • X-axis speed (2/4/5 axes): 650 mm/s Gijdpfx Aox D Dw Sodbsp • X-axis accuracy (2/4/5 axes): +/- 0.04 mm • R-axis travel (2/4/5 axes): 250 mm • R-axis speed (2/4/5 axes): 200 mm/s • R-axis accuracy (2/4/5 axes): +/- 0.1 mm • Z-axis speed (4/5 axes): 1500 mm/s • Z-axis speed (6 axes): 1200 mm/s • Z-axis accuracy (4/5 axes): +/- 0.1 mm • Approx. max. Y-rapid traverse: 200 mm/s • Approx. max. Y-rapid traverse in High Speed*: 220 mm/s • Max. Y-working speed: 10 mm/s • Approx. max. Y-working speed in High Speed*: 20 mm/s • Approx. max. Y-working speed in High Speed for robot operation*: 20 mm/s • Y-axis accuracy: 0.004 mm • Oil capacity: 445 l • Main motor power: 22 kW • Weight: 15 t • Machine width [W]: 2050 mm Technical Specification Bending Length 3100 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, stroke length: 300 mm, number of axes: 6, travel distance X-axis: 600 mm, overall weight: 6,400 kg, total height: 2,810 mm, travel distance Y-axis: 300 mm, pressing force: 102 t, product length (max.): 4,175 mm, This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information • Throat depth: 590 mm • Control system: CNC – EC 20 • Upper beam stop time: < 92 ms • Safety distance (light curtain): ≥ 185 mm • Electrical supply: 3 × 400 V / 50–60 Hz / N / PE • Connected load: Max. 11 kW Additional equipment • Tools visible in the photos are not included but can be sold with the machine for an additional fee. Technical Specification Gijdpfx Aex D Eanedbop Bending Length 3060 mm Dimensions Machine Depth 2140 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,333 h, controller manufacturer: TRUMPF, This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information. Godpfxjx D R Udo Adboip Extra Information • Working Area: X=2500 mm / Y=12000 mm • Axes: 2 x 32 kW • Laser Heads: 2

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,323 h, laser power: 2,500,000 W, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,555 mm, travel distance Z-axis: 240 mm, overall weight: 13,000 kg, total height: 2,200 mm, product length (max.): 9,350 mm, number of axes: 3, This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited CO₂ laser, capable of cutting various materials with a maximum sheet size of 3000 × 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details. • Max sheet size: 3000 × 1500 mm • Max sheet weight: 570 kg • Max positioning speed: • X/Y axes: 100 m/min • Z-axis: 15 m/min • Repeatability: ±0.025 mm • Positioning accuracy: ±0.05 mm/m • Laser: • Type: Fanuc HF-excited CO₂ • Power: 2500 W (±2%) • Power range: 100–2500 W • Output stability: ±1% • Wavelength: 10.6 µm • Pulse frequency: 5 Hz–33 kHz • Laser gas consumption: 10 l/h • Cooling: Closed-loop water system • Material cutting capacity (2500 W): • Steel: 16 mm • Stainless steel (N₂): 10 mm • Aluminum: 6 mm Additional equipment • Automatic loading/unloading system: • Max sheet size: 3050 × 1525 × 12 mm • Max stack weight: 2500 kg • Max stack height: 100 mm • Footprint (including auto loader): 8900 × 6600 × 3700 mm • Compact tower: • Max sheet size: 3050 × 1525 × 16 mm (or 2550 × 1525 × 20 mm) • Min sheet size: 1000 × 1000 mm Gjdpjyg Ixgefx Adbeip • Max pallet weight: 3000 kg • Max pallet height: 240 mm (including pallet) • Footprint: 8850 × 7200 mm • Tower height options: • 4 pallets: 4100 mm • 6 pallets: 4940 mm • 10 pallets: 6620 mmNote: “Min sheet size: 1000 × 1000 m” in the source appears to be a typo; listed here as mm.

Condition: ready for operation (used), Year of construction: 2002, This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine. Gjdpfsycfytox Adbsip • Workpiece clamping: • Self-centering product clamp, gripping the tube from the outside • Interchangeable clamping jaws for different tube/profile types • Adjustable clamp position for accurate alignment • Workpiece dimensions: • Max product width (single-sided punching): 100 mm • Max product height (single-sided punching): 80 mm • Max product height for through holes: 60 mm • Max travel of product clamps: 3,100 mm • Minimum distance from tube end to first punchable hole: 30 mm • Punching capacity: • Max punching diameter (as delivered, through holes): Ø40 mm • Punching station: Single vertical punching cylinder • Max punching force: 250 kN at 220 bar working pressure • Max vertical stroke of punching cylinder: 80 mm • Performance: • Max strokes per minute: Dependent on cylinder stroke setting and hole pitch • Clamp carriage travel speed: approx. 40 m/min • Positioning repeatability: ±0.1 mm • Machine size and range: • Punching machine working range: > 3.10 m • Support table length: 3.00 m

Condition: ready for operation (used), Year of construction: 1998, total height: 2,300 mm, overall weight: 13,800 kg, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 2500 mm on the X-axis and 1250 mm on the Y-axis. It requires a 400 V power supply and 6 bar of compressed air. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • Maximum sheet thickness (steel): 6 mm Gsdpfex Uqzzox Adbsip • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis working range: 2500 mm without repositioning • Y-axis working range: 1250 mm • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar • Includes a large set of punches, dies, and tool holders • The machine is in working condition. Dimensions Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,520 h, overall weight: 235 kg, total height: 1,055 mm, number of axes: 3, This 3-axis Trotec Speedy 360 was manufactured in 2019, featuring a robust CO₂ laser system with a power range of 40-120W. It offers a maximum working area of 32 × 20 inches and supports a variety of materials with its multifunctional table options, including a vacuum table and honeycomb cutting tabletop. Ideal for precise cutting and engraving, this machine includes JobControl® Expert Software for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the Trotec Speedy 360 machine we have for sale. Contact us for further details regarding this machine. Giedox U Th Repfx Adbjp Additional equipment • Autofocus: Light Bar Focus (electro-optic) • Positioning: Laser pointer (655 nm, Machine Benefits Technical Machine Benefits • Ergonomic access to working area • Coaxial air assist • Optional features: protection kit, air assist, rotary attachment, jobcontrol® vision, vacuum table, honeycomb cutting tabletop, specialized cutting tables • Exhaust system: surface exhaust via rear of the engraving cabinet, table exhaust with vacuum and cutting table • Laser safety: classification: cdrh laser safety, ce tested, laser class 2 • Laser safety: safety features: duplicate interlock system, front-side loading lid • Temperature: +15°c to +25°c • Humidity: 40% to max. 70% (non-condensing) • Dust-free environment: 2nd degree per iec 60947-1 Extra Information Movement Working Area: 813 × 508 mm Loading Area: 890 × 600 mm Max. Workpiece Height: With working table: 210 mm Without working table: 280 mm Motion System Speed: 355 cm/sec Acceleration: 5g Workpiece Max. Material Load: Static: Up to 100 kg Dynamic: Up to 30 kg Table Working Tables: Standard: Ferromagnetic engraving table Optional: Multifunctional table system and Honeycomb cutting tabletop Tools Lenses: Standard: 2.0" Optional: 1.5", 2.0" clearance lens, 2.5", 4.0" Dimensions Machine Depth 1221 mm

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, overall weight: 10,400 kg, total height: 2,900 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 1030 was manufactured in 2011, featuring a robust fiber laser, TruDisk 2001, with a 2 kW output and a maximum material thickness capacity for mild steel at 25.0 mm. It operates with a SIEMENS SINUMERIK 840D control and can handle a maximum workpiece weight of 720 kg. If you are looking to get high-quality cutting capabilities, consider the TRUMPF TruLaser 1030 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Gijdjyap Sbepfx Adbep • Laser output: 2 kw • Laser type: fiber trudisk 2001 • Beam on working: 30000 hours • Electric consumption entire unit: 11 kw • Control: siemens sinumerik 840d, b&r automation pc 620 • Simultaneous positioning speed: 85 m/min (x+y) • Working area (x x y x z): 3000 x 1500 x 75 mm • Brass: 3. 0 mm • Copper: 3. 0 mm • Mild steel: 25. 0 mm Extra Information Machine still under power Dimensions Machine Depth 7800 mm

Condition: ready for operation (used), Year of construction: 2011, punching force: 31 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, controller manufacturer: FANUC, number of axes: 2, This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4,5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0,1 mm • Z-turret stations: 45 Gedpox D Hpqofx Adbjip • AutoIndex stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 1/min • Max. number of hits: 1000/min • Machine frame: Bridge frame • Punching drive: Servo-electric Twin Drive • Drives (turret + table): AC-Servo motors • Clamps: Pneumatical • Electrical connection: 400V / 50Hz • Electrical consumption: 1 kW – 7 kW • Air consumption (machine): 250 l/min • Air consumption (Air Jet Vakuum): 250 l/min Additional equipment • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0,5 – 8,0 mm • Max. loading weight: 300 kg • Max. stack height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. feed rate (traverse): 70 m/min • Number of suction cups: 34 pieces • Double sheet control: Yes, with sheet thickness detector • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with Parts Remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie) • Max. part weight: 50 kg • Storage table size: 3400 x 1400 mm • Max. part size for unloading clamps: 3000 x 1500 mm • Max. stack height skeleton table: 450 mm • Max. weight skeleton table: 2000 kg • Max. stack height storage table: 450 mm • Max. weight storage table: 4000 kg • Max. feed rate X-/Y-direction: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar inlet pressure • Electrical connection: 400V

Year of construction: 1997, condition: ready for operation (used), This SCHRODER-FASTI FASTI 509-40-6 was manufactured in 1997. A Hydraulic shearing machine capable of handling aluminum up to 8mm, steel up to 6mm, and stainless steel up to 3mm. Minimum stop dimension is 15mm. A solid choice for shaping various metals, the SCHRODER-FASTI FASTI 509-40-6 machine we have for sale. Contact us for further details. Additional equipment • Front-operated motorised fence • Right-angled side stop 90° with tilt stop • 2 drop cam stops in T-slot guide • Table extensions with T-slots • Operating tool Machine Benefits Technical Machine Benefits • Minimum stop dimension: 15 mm • Construction: all-steel welded construction • Cutting technology: / double-edged, multi-part blades with 87° wedge angle / stepless cutting length adjustment / cutting gap adjustment (can be read to 1/100 mm using a dial gauge) / cutting line display with silhouette • Drive: hydraulic with oil filling • Control system: o electric control in accordance with din en 60204-1 / operating modes: single stroke, continuous stroke, partial stroke, jogging Gisdsx U T Hajpfx Adbop • Projection on the side stand: 50 mm • Dimensions (approx. ) for 509-40-6: a (total length): 4540 mm /b (table width): 1885 mm /c (table depth): 1645 mm/ d (cutting length): 4300 mm/ h (height of work surface): 2329 mm /k (total machine height): 1430 mm • Side stand projection: 50 mm (standard) • Foundation fastening: composite anchor hva m16x125 with mortar cartridges (drill Ø 18 mm) / concrete strength class min. B25 required. • Cutting performance: shear angle: large angle = lower resistance, higher performance. / small angle = higher resistance, lower power // max. Sheet thickness: o dependent on material strength (see diagram in document). O recommended strip width: 12-15 × sheet thickness for low-torsion cuts Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,118 h, laser power: 6,000,000 W, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details. • Connected load: 400 V / 50 Hz / 12 kVA • Main fuse: 3x160 A • Safety: Light barrier system Gedpsyrfbcsfx Adbjip • Laser hours: 20,118 h • Condition/Service: Completely freshly serviced Additional equipment • HANDTE MF-L 2000 extraction system

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,000 h, number of axes: 3, This 3-axis Bystronic BySpeed 4020 was manufactured in 2012. It features a maximum sheet size of 4000 x 2000 mm and is equipped with a 4.4 kW CO2 resonator. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 4020 machine we have for sale. Contact us for further details. • Axes: 3 • Max. sheet size: 4000x2000 mm Gijdpfx Adeynacgsbsp • Resonator: 4400 W CO2

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,364 h, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details. • Laser Power: 6000 W • Laser Type: CO₂ • Supply Voltage: 400 V / 50 Hz • Connected Load: 109 kVA • Control Voltage: 24 V • Required Fuse Protection: 3 × 160 A • Compressed Air Connection: 7–10 bar Giedpfx Adsynlhnsbsp • Nitrogen Connection (N₂): 30 bar • Oxygen Connection (O₂): 20 bar • Working Area (Sheet Format): 3000 × 1500 mm

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. • Max stroke rate: 350 1/min • Max material width: 60 mm • Standard center ram force: 20 KN • Standard center ram stroke: 45 mm • Air pressure for pneumatic clutch: 6 BAR • External dimensions of the machine (WxHxD, without protective cabin): 2000×2000×900 mm • External dimensions of the control cabinet (WxHxD): 1000×2200×600 mm • Drive: Asynchronous main spindle motor 10.6 kW / 71.3 Nm @ 760 rpm • Reduction ratio: 1:5.09 • Clutch: Unit brake (mechanical) / clutch (pneumatic) • Power: adjustable from 20 rpm to 350 rpmMachine under power Additional equipment • NC roller feeder (feeding length freely programmable) Gjdpfx Aox D Efqsdbjip Dimensions Machine Depth 2450 mm

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# Gsdpfx Ajyhfvljdbeip • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: ready for operation (used), Year of construction: 2006, operating hours: 26,916 h, This 3-axis Bystronic BySpeed 3015 was manufactured in 2006. It features a maximum sheet size of 3000 x 1500 mm and is equipped with a powerful 4400 watt CO2 resonator. With recent upgrades including a W-axis replacement in 2025 and a blower replacement in 2023, this machine is well-maintained. The machine includes a ByTrans Extended. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 3015 machine we have for sale. Contact us for further details. Gisdpfx Aoymdrcedbsp • Max. sheet size: 3000 x 1500 mm • Resonator: 4,400 W CO2 • W-axis replaced: 2025 • Blower replaced: 2023 Additional equipment • ByTrans Extended (loading/unloading automation)