Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Dedpfx Apezgci Eomscp Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 1999, Euromac hydraulic punching machine Type CX1000/30/2000 Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin Djdpfx Aspmt Ttspmecp 6-fold multitool + with 6-fold die holder

Condition: new, 1 brand new hydraulic swing-cut plate shear (unused showroom machine) Manufacturer: LAMI NOVA Model: SC 2006 Dcodpjd Ad A Eefx Apmsp Max. cutting length: 2100 mm Max. sheet thickness, for normal steel: 6.5 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting speed: 29 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 2670 x 2000 x 1600 mm Weight: 4500 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning display for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal • Central shear gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the clamping beam • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system by SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Delivery time: immediately, subject to prior sale plus additional freight costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, 1 brand new hydraulic oscillating shear Dcsdpfx Apjd Ad Dbsmop Manufacturer: LAMI NOVA / Exclusive dealership! Model: SC 4006 Max. cutting length: 4100 mm Max. sheet thickness, for normal steel: 6 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting rate: 14 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 4630 x 2050 x 1700 mm Weight: 9600 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning indicator for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal plates • Central cutting gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the hold-down device • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Fig.: with option! Delivery time: approx. 3 months after order receipt plus pre-carriage costs China - Germany Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Djdpfsvk Scgjx Apmecp Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Dsdpjvkw Dvefx Apmocp Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2600 Exclusive representation! Dcedpfx Aper Hby Hemep Technical data: Pressure capacity 100 t Folding length 2600 mm Clearance between the uprights 2050 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 3050 x 1650 x 2520 mm Weight 6200 kg Accessories / special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunging depth and the back gauge - PM 1 upper tool, consisting of 3 x 835 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_202500022, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Dcjdpe Agvbujfx Apmep Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: good (used), sheet width 2000 mm Dcjdpsul Ei Eofx Apmep plate thickness 2,25 mm distance between columns 2040 mm total power requirement 7,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 35,000 h, machine/vehicle number: H981224, stroke length: 180 mm, throat depth: 410 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table height: 960 mm, oil tank capacity: 150 l, overall weight: 13 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, power: 11 kW (14.96 HP), pressing force: 170 t, clearance between the columns: 3,760 mm, table length: 4,230 mm, table width: 180 mm, Equipment: CE marking, documentation/manual, safety light barrier, This machine can still be inspected in its current operational state at the factory in Northern Germany. Working length: 4100 mm Distance between columns: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: Includes tool cabinet with tools. Dsdpfx Aps Ahfnusmocp

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: A0441D0171, TRUMPF TruLaser Tube 7000 (T03) – 3.6 kW – LoadMaster Tube 6.5 m – Full Equipment Manufacturer: TRUMPF Model: TruLaser Tube 7000 (T03) Machine Type: CNC Tube Laser Cutting Machine Year of Construction: 2016 Control System: Siemens Sinumerik 840D Laser Power: 3,600 Watts (TruFlow 3600) Laser Technology: CO₂ Laser Voltage: 400 V Frequency: 50 Hz X-axis tube travel: 6,500 mm Outer diameter: 204 mm Lens cutting head with 155 mm focal length Condition: Used, very good Availability: Upon request For sale is a TRUMPF TruLaser Tube 7000 (T03), a high-performance CNC tube laser cutting machine with a 3.6 kW CO₂ laser and extensive optional equipment. The machine features an automatic LoadMaster Tube 6.5 m loading system with bundle support and two grippers, as well as a flexible unloading station with a length of 4.5 m. Thanks to the SeamLine Tube, PierceLine, FocusLine, NitroLine, and ControlLine equipment, the system offers versatile options for the precise processing of tubes and profiles. The integrated technology package for bevel cuts expands the processing capabilities. The scratch-resistant material feed, the movable conveyor tables, and the automatic scrap conveyor ensure an efficient material flow. All technical specifications are based on the available TRUMPF delivery documents from March 2016. Subject to change and errors. Sale due to business closure. Dcjdpo Afpucefx Apmop Price upon request.

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Dsdpe Ah Rb Dsfx Apmscp Sheet metal thickness in steel: 2.5 mm Sheet metal thickness in stainless steel (700 N): 1.5 mm Back gauge distance: up to 550 mm .....FASTI: Capacity 1020 x 2 mm with pneumatic weight compensation for the bending arms and with finger stop Package price: EUR 4,900.00 net

Condition: like new (used), functionality: fully functional, Year of construction: 2007, operating hours: 20 h, machine/vehicle number: 21279, overall weight: 1,800 kg, Equipment: emergency stop, foot remote control, GEKA HYD55 Dsdpfxj Ah Rlxs Apmscp AS new, only used ca 20 hours Punching - 55 ton Shearing - 110 ton Angles - 120 x 120 x 10 mm Flat Bars - 300 x 15 mm Bars - Ø40 mm Bars - 40 mm Punching - Ø 40 mm x 10 mm 1000 mm electric lenght stop

Condition: like new (used), functionality: fully functional, Year of construction: 2008, HACO ERMS 2040 (83331) Technical condition: Good Stroke length: 2100 mm Tonnage: 40T Type of press brake: Synchronized Back gauge: X-axis CNC controlled, R-axis adjustable in height (manual) Back gauge length: 800 mm Throat opening: 400 mm Overhang: 200 mm Control system: ATS 595 (CNC control, NEW) Motor power: 4.1 KW 380V Tooling: New set of upper and lower blades Tool holder: European standard Serial number: 83331 Overall width: 3000 mm Overall height: 2250 mm Overall depth: 1800 mm Djdpfs Ahy Scox Apmjcp Weight: 3500 kg Year of manufacture: 2008

Condition: used, Year of construction: 2006, tube 4500 mm 76,1 x 4,0 mm 200 mm total power requirement 3,5 kW machine weight ab. 1.500 kg Dsdpfx Ao Ahzihopmocp

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Dodeng Exaopfx Apmocp Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, Year of construction: 1994, Technical details: sheet width: 3200 mm plate thickness: 4 mm distance between columns: 3200 mm connected load: 9 kW connection voltage: 380 V Dcjdpfx As Agnm Rspmop Total power requirement: 7,5 kW bending angle max.: 180 ° air-pressure connection: 6 bar depth stop: 10 - 1550 mm adjustment speed: 200 mm/sec Weight approx.: 5800 kg dimension machine approx.LxWxH: 4,6 x 2,1 x 2,6 m Control system: RAS Multibend 9000 CNC with color monitor RAS 74.30 – Hydraulic Folding Machine The RAS 74.30 is a robust, hydraulically operated folding machine manufactured by the German company Reinhardt Maschinenbau GmbH (RAS), based in Sindelfingen. The machine is designed for precise bending and folding of sheet metal in industrial applications.With a working and bending length of 3,200 mm and a maximum sheet thickness capacity of 4 mm for steel, the machine is particularly suitable for manufacturing long profiles, cladding panels, housings, ducts and general sheet metal constructions.During the folding process, the workpiece is clamped between the upper and lower beams. The folding beam then performs a swivelling movement, forming the sheet metal to the required angle. This process enables controlled bending while minimizing material stress, particularly when processing large-format sheet heavy-duty machine construction, with a net weight of approximately 5,800 kg, ensures excellent stability during the bending process. The installed drive power is 7.5 kW. *

Condition: good (used), functionality: fully functional, Year of construction: 2006, stroke length: 200 mm, overall weight: 11,600 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, input voltage: 400 V, pressing force: 170 t, clearance between the columns: 2,700 mm, distance table to ram: 350 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Dcedpfxjz S Nuqo Apmep Tool clamping system: Wila Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control and a Wila tool clamping system. The machine is used but still in good working order. One set of tools is included with the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon consultation. The machine is stored in Liège but can be inspected while powered on.

Condition: good (used), Year of construction: 2010, 1 used pipe bending machine Manufacturer: Tubobend 48 Year of manufacture: 2010 Technical data: - Bending capacity - Pipe with 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180° - Bending radius 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 7500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - With fine adjustment for bending angle - Mandrel bending device, 6.0 m, with hydraulic retraction - Bending tools Dodj Ahwf Uopfx Apmecp Equipped with: - Torsion device - Deburring station - Hydraulic mandrel retraction - Lubrication - As well as 6 tool sets and the corresponding mandrels

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,147 h, Hydraulic plate shear Manufacturer: Baykal Model: HGL 3106 Year of manufacture: 2017 The Baykal plate shear has a very stable construction and is CE-compliant. The machine is being sold due to the closure of operations due to the owner's retirement. Technical data of the BAYKAL HGL 3106 plate shear: Maximum sheet length: 3060 mm Maximum sheet thickness: 6 mm Maximum stroke rate: 20/min Cutting angle: 1.6° Back gauge stroke: 750 mm Dedpfx Apo Ahwb Hsmscp Motor power: 11 kW Hydraulic pressure: 200 bar Oil tank capacity: 160 l Emergency stop Foot pedal Power connection: 3×400 V; 50 Hz Overall dimensions (L x W x H): 3860 x 2560 x 1560 mm Total weight of the HGL 3106 machine: 5500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, overall weight: 3,000 kg, HACO ERMS 2040 (83331) Technical condition: Good Stroke length: 2100 mm Tonnage: 40T Type of press brake: Synchronous Back gauge: X-axis CNC controlled, R-axis adjustable in height (manual) Length of back gauge: 800 mm Daylight opening: 400 mm Overhang: 200 mm Dcsdpfxj Adny Ue Apmjp Control system: ATS 595 (CNC control, NEW) Motor power: 4.1 KW 380V Tooling: New set of upper and lower blades Tooling standard: European standard Serial number: 83331 Overall width: 3000 mm Overall height: 2250 mm Overall depth: 1800 mm Weight: 3000 kg Year of manufacture: 2008

Condition: used, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 800 kg Price: On request Control: Teach-in Motor power: 4 kW Press force: 28 metric tons Maximum stroke: 180 mm Table: 300 × 550 mm - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Power: 28ton - Stroke max: 180mm - Table length: 300mm - Table width: 550mm - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Dsdpfxsztxnqj Apmecp

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 60880, Hydraulic plate shear Manufacturer: Durma Model: SB 3013 NT Year of manufacture: 2007, but very little use Max. working width: 3000 mm Max. sheet thickness: 13 mm Digital display with program setting Rear stop: 1000 mm 1 side stop: 1500 mm 2 front stops: 1000 mm Dodpfx Ao Ahkrwspmecp Stroke: 130 mm Stroke rate/min: 10 strokes Oil capacity: 330 liters Width: 3950 mm Length: 4250 mm Height: 2200 mm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,981 h, punching force: 41 t, sheet thickness (max.): 15 mm, overall weight: 4,900 kg, total width: 2,250 mm, total height: 2,100 mm, product length (max.): 5,800 mm, CNC punch press manufactured in 2009. This BOSCHERT CU-Profi features 4 Amada tool stations and a parting station of 60x10 mm, including tooling. It comes with a tooling package of punch and die sets for stations A and B, along with integrated infeed and outfeed roller conveyors for efficient material handling. If you are looking to get high-quality punching capabilities, consider the BOSCHERT CU-Profi machine we have for sale. Contact us for further details. Dsdpfx Aj Ahkaispmocp - Punching Force: 400 kN (40 tons)- Maximum Sheet / Material Thickness: 12 mm to 15 mm (copper/aluminum flat bar: standard 3 – 12 mm, up to 15 mm max; copper up to 10 mm with diameter 31.7 mm, copper up to 12 mm with max. diameter 20 mm)- Maximum Workpiece Width: 15 – 200 mm- Maximum Workpiece Length: Up to 3 m- Tool Stations: 4+1 stations (4x Amada holder size B + 1x separation/cutting station 60 x 10 mm / 60 x 8 mm)- Maximum Punch Diameter: 4 x 31.7 mm or any contour within 31.7 mm (B station)- Included Tooling: Punch and die sets for stations A and B, punch reduction adapter from B to A, die holder adapter from B to A, separation/cutting tool (excluding copper stock and tooling/punches)- Stroke Rate: Approx. 85 strokes/min max. (optional fast hydraulics approx. 180 strokes/min)- Stroke Counter: 4,541,086 strokes- Operating Hours - Machine On: 35,855 h- Operating Hours - CNC On: 35,981 h- Operating Hours - Drives On: 35,799 h- Operating Hours - Hydraulics On: 8,465 h- Material Infeed: Material gripper feed via guide unit and AC servomotor; zero-waste gripper design; repeatability ±0.1 mm- Clamping System: Hydraulic Y-axis material clamping before and after the punching head- Parts Discharge: Finished part unloading system downstream of punching head; automatic scrap disposal- Support Surface: Roller support table and guide track system; large support table for copper busbars- Control System & CNC: CNC Control LABOD with graphic path control; DOS-based architecture; 3.5" floppy disk drive; tool library for 500 tools with graphical shape display; automatic overlap and cutting force monitoring- Software & Connectivity: 1x PC version (runs on Windows 95/98/NT 4.0); 1x CNC/CAD (cncKad / Metalix CAD/CAM with DXF, IGES, CADL, DWG import; server-capable); 1x Multitalk (SD card 256 MB storage for ~100,000 programs, USB interface with external cabinet cable mount, 256 MB USB stick, network port with FileZilla Server integration)- Safety: Front light curtain safety barriers and safety interlock guarding compliant with CE standards- Hydraulics: H&L hydraulic unit with oil cooling (4.7 kW standard / 11 kW optional); 160 l oil capacity- Connected Load (Anschlußleistung): 18 – 25 kVA- Power Supply (Netz): 3 x 400 V, 50/60 Hz- Control Voltage (Steuerspannung): 24 V- Required Fuse Protection: 3 x 35 A- Dimensions (L x W x H): 5.8 m x 2.25 m x 2.1 m- Machine Weight: 4,900 kg- Machine Color: Gentian Blue (RAL 5017)

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, straightening roller diameter: 290 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW Dodpfe Ah Enfsx Apmecp