Condition: like new (used), functionality: fully functional, Year of construction: 2007, operating hours: 20 h, machine/vehicle number: 21279, overall weight: 1,800 kg, Equipment: emergency stop, foot remote control, GEKA HYD55 AS new, only used ca 20 hours Punching - 55 ton Shearing - 110 ton Angles - 120 x 120 x 10 mm Dkjdpfx Apj Ah Rlxemsw Flat Bars - 300 x 15 mm Bars - Ø40 mm Bars - 40 mm Punching - Ø 40 mm x 10 mm 1000 mm electric lenght stop

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Dsdpfx Apsng Exaemjkw Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: TO5_10, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 5 t, working width: 350 mm, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 2, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 375 kg, power: 3 kW (4.08 HP), warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Dedpfj Ah Sd Nox Apmskw Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CIP-8P_1003, overall weight: 320 kg, total length: 650 mm, total width: 2,300 mm, total height: 1,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Pneumatic Press-In Machine CIP-8P Technical Data: Pressing force 80 kN, approx. 8 tons Force setting via display, accuracy 1 kg Djdpfx As Ah Sgvjpmekw Compressed air 8 bar, min. 150 l/min Tool and shank diameter: Total length 37 or 76 mm, of which 15 mm is in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Warranty: 36 months after delivery

Condition: new, Year of construction: 2026, Discover the new RED 3200/0.8/160° folding machine from Prod-Masz – available to test on-site and ready for immediate pickup! This state-of-the-art machine features specialized cutouts, allowing for flexible sheet metal processing. Benefit from expert on-site instruction to ensure you make the most of the machine’s functions and capabilities. See for yourself the quality and versatility it offers! Technical Specifications: - Working length: 3200 mm Dsdpfxe Aic Eqj Apmokw - Bending capacity: up to 0.8 mm - Bending angle: max. 160 degrees - Bending beam thickness: 15 mm - Upper beam lift: 80 mm - Weight: approx. 600 kg - Upper beam adjustable to three positions Features: - Degree scale - Angle stop - Rear support frame - Front depth stops - CE certificate - 12-month warranty Optional accessory: Roller shear (up to 0.8 mm) – 350 EUR Shipping within Germany: 360 EUR All prices are subject to 19% VAT Self-pickup available

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, MORGAN RUSHWORTH GUILLOTINE MODEL HSGS 3100 X 6 MM CNC CONTROL - CYBELEC CYBTOUCH 6 YEAR 2016 FRONT AND REAR GUARDS SQUARING ARM FRONT SUPPORTS Dkodpfx Apjz Ehtwomew BLADES EXCELLENT BLADE GAP IN EXCELLENT CONDITION , ONLY USED ON LIGHT MATERIAL SINCE NEW CAN BE VIEWED AT OUR WORKS OR A VIDEO CAN BE SENT

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, sheet thickness (max.): 28 mm, pipe diameter (max.): 240 mm, pipe length (max.): 6,300 mm, workpiece weight (max.): 800 kg, Equipment: CE marking, documentation/manual, Complete set double use laser machine ( 6 Kw on the way ) sheet metal 3015 ( 3 x 1,5 meter ) Tube 15 to 240 mm diameter tube length 6,3 meters options for a perfect laser line. option 1 filter installation ( cutting air can leave in factory ) include anty fire box. option 2 Vacuum lift for sheet metalplate 800 kg load. no cable unit work on battery in vacuum unit. option 3 compressor for 16 BAR it give posibility to cut steel without gas. for quick cutting and SST steel it save lot of air and can increase the cutting feed consummable for long time cust free cutting time. option vacuume lifter from 800 Kg lifter work on battery in lifter box so with loading machine no cables around you special for save working arear. Price is EXW Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer Benelux, Romania, Germany Dodpfxenqzb Ij Apmekw CNC Top Ten b.v. Coevorden Holland

Condition: excellent (used), Working width 1010 mm Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail • Flat rail on the bending beam • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile Dodpfx Ajwg Ru Eepmekw • The bending tools are suitable for narrow and wide sheet metal for fine bending • Angle adjustment with graduation • Easy bending thanks to counterweight Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), functionality: fully functional, Year of construction: 1998, working width: 2,000 mm, pressing force: 35 t, pressure 35to max. bending length 2000mm arrester behind drive capacity 4,5 kW Dksdewagykepfx Apmow weight 3000kg

Condition: new, 1 set of brand new table shear blades Dkodjddzg Eopfx Apmow suitable for a hydraulic table shear Manufacturer: MEGOBAL Model: GH 2506 Cutting length: 2500 mm Cutting thickness: 6 mm Weight: 60 kg including wooden transport crate Delivery time: immediately, subject to prior sale Options: Further spare parts for table shears and bending machines, as well as service, available upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Max. Bend length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Hoist height of the upper jaw and material thickness preselected above the limit switch Dksdpfjudqd Rex Apmew Manual rear stop Weight: approx. 1000 kg

Condition: used, Year of manufacture: 2025 - Year: 2025 - Documentation available: Yes - CE certificate present: No - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 2100 - Backgauge depth [mm]: 750 Financial information VAT: The price shown is exclusive of VAT Djdpfxownipds Apmekw VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS Dedpfx Apjz R Dwksmokw General Information Manufacturer: Baykal Type of Machine: Hydraulic Plate Shear Model: HNC 8100/6 Working Area Working Width: 8,100 mm Sheet Thickness: max. 6 mm EQUIPMENT Motorized Back Gauge Automatic Shear Gap Adjustment Automatic Angle Adjustment Sheet Support Device

Condition: excellent (used), Year of construction: 1999, stroke length: 3,060 mm, throat depth: 410 mm, operating speed: 11 mm/s, reverse speed: 135 mm/s, overall weight: 18,209 kg, total length: 2,310 mm, total width: 3,660 mm, total height: 3,095 mm, power: 30 kW (40.79 HP), pressing force: 230 t, clearance between the columns: 2,690 mm, table width: 200 mm, CNC Crowning Hydraulic MODUFIX Tool clamping Hydraulic lower tool clamping CNC Finger Backgauge Z1 and Z2 6 Axis backgauge X1/X2, R1/R2 and Z1/Z2 Network card BNC-with RJ-45 Connector ToPs 600 Software Dsdpfj Aa It Tex Apmokw Set Tooling  Max. bending length: 3060mm Distance between column: 2690mm Max. pressing force: 230T Dis. Beam - Table: 535mm Beam stroke: 365mm Table Width: 200mm Troth beam: 410mm Approch speed: 200mm/min. Working speed: 11mm/min. Return speed: 135mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 9 Crowning: yes Hydraulic toolclamping: yes Power: 30kW Length: 2310mm Width: 3660mm Height: 3095mm Weight: 18209kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, pressure 60.0 t punching cross-cut in cmm 28 in 15 / 38 in 11 mm square edge steel 35 x 35 mm Dkedpfxe Aa A Ife Apmjw L-beam 120 x 120 x 12 mm round bar steel 40.0 mm flat steel 200 x 20 / 300 x 15 mm blade length 317 mm throat 220 mm work height max. 940 / 1140 mm strokes per minute max. 26 work stroke max. 55.0 mm oil volume 23.0 ltr. total power requirement 4.0 kW weight of the machine ca. 1440 kg Dimensions (HxWxD) 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 2007, puncher 55 t square edge steel 40 mm round bar steel 40 mm L-beam 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.) Ø 40 x 10 mm shear: flat material 300 x 15 mm Dodpoz St Riefx Apmekw throat 250 mm work stroke 60 mm work height max. 1085 mm total power requirement 4,0 kW weight 1300 kg range L-W-H 2000 x 900 x 1800 mm Equipment: - Electro-hydraulic structural steel shears with 4 workstations * Flat steel shears * Structural steel shears * Punch press * Notching station - Driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at the hole-punching

Condition: used, functionality: fully functional, Nitto punching tool with crane. Dodsz Szg Sepfx Apmjkw

Condition: good (used), Year of construction: 1957, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: M.Heitze / Deuma Heitze, Container rotating device, welding rotating device type 405/0 -Load capacity: 4000 kg Dksdoz Szkwopfx Apmew -Roller spacing: 240 - 780 mm -Rollers: Ø 185 x 105 mm -Rolling speed: 0.15 to 0.70 m/min Right/Left rotation -Control unit: with foot switch -Individual components: see photos -Transport dimensions: 1160/920/H785 mm / 600/540/H785 mm -Weight: 411 kg / 221 kg

Condition: used, functionality: fully functional, Year of construction: 1996, Motorized Swivel Bending Machine Manufacturer: HERA, Model: SM4 2500x6mm Year of manufacture: 1996 Technical data Manufacturer: HERA Model: SM 4 Year of manufacture: 1996 Capacity: 2520 x 6 mm Upper die stroke: 450 mm Lower die adjustment: max. 80 mm Bending die adjustment: max. 100 mm Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions: Width: 3.9 m, Depth: 2.75 m, Height: 1.9 m Weight: approx. 7 t Equipment • Motorized back gauge 1000mm with ball roller support table • Motorized bending die adjustment • Sharp clamping bar 45° • Bending bars: 10mm, 20mm, 40mm • Segmented support foot, height 130mm, length 2500mm All information without guarantee. Dksdpfx Aj Afu Hkspmow An inspection while the machine is running is possible at any time in our showroom.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: CIP-8P_1001, overall weight: 320 kg, total length: 650 mm, total width: 2,300 mm, total height: 1,100 mm, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Pneumatic Press-In Machine CIP-8P Technical Data: Pressing force 80 kN, approx. 8 tons Force setting via display, accuracy 1 kg Compressed air 8 bar, min. 150 l/min Dkedpe Afwygofx Apmew Tool and shank diameter: Total length 37 or 76 mm, of which 15 mm is in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Warranty: 36 months after delivery

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Dedpew Emf Defx Apmskw Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster Dkedoxayl Djpfx Apmew - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: used, Year of construction: 1995, pressure 55 t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t LVD PPI 55/20 MNC 95/C – CNC Press Brake – Year 1995 For sale is a used hydraulic CNC press brake manufactured by LVD, model PPI 55/20 MNC 95/C. Technical Specifications: - Manufacturer: LVD, Belgium - Model: PPI 55/20 MNC 95/C - Year of Manufacture: Pressing Capacity: 55 tonnes - Bending Length: 2,000 mm - CNC Control: MNC 95/C - Power Supply: 380 V / 50 Hz - Connected Load: 12.5 kW - Rated Current: 25 A - Machine Weight: Approx. 4,300 kg - Serial Number: 22161 Djdpfoyk Ikdex Apmskw Condition: The machine is used and is reported to be in working condition. However, its current operational condition and full functionality have not been independently verified or guaranteed. The machine is offered in its existing as-is condition, as inspected and/or shown in the photographs. Age-related wear, technical defects and potential repair or maintenance requirements cannot be ruled out. Important Notice: All technical specifications, equipment details and information regarding the machine's condition are based on the available nameplates, photographs and information currently available. All information is provided in good faith but is strictly subject to verification and without any guarantee as to its accuracy, completeness or continued functionality. The technical specifications and statements regarding operational condition do not constitute a guarantee of condition, performance or fitness for purpose. Errors, omissions, discrepancies and prior sale excepted. Prospective buyers are strongly advised to inspect and test the machine and independently verify all relevant technical specifications and its operational condition before purchasing. Inspection by prior appointment is possible.

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Dkodpfx Ashtq N Nopmow Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Djdpfx Aozh Icyjpmjkw Year of manufacture: 2005