Condition: excellent (used), Year of construction: 1991, CNC vertical lathe with tool changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/retrofit Siemens 828D (retrofit) Faceplate diameter: 1,400 mm Face plate load: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger input bore: min. 340 mm Number of rams: 1 Ram cross travel: X 1,900 (+/- 950) mm ram vertical travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverse: X,Z 8,000 mm/min. Crossbeam vertical travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm. Gear stage: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on faceplate: max. 40,000 Nm Automatic tool changer: Tool magazine positions: 20 Cebetx Au Hj Hb Hzvjgt Tool radius: max. 200 mm Tool length: max. 675 mm Accessories: Large tool pack; Large spare parts package; Large package of clamping jaws; Full cladding; Chip conveyor; Coolant system; New coolant and flood coolant pumps. Condition: Very good condition. The mechanical condition is very good. Completely new electrics and Siemens 828D Siemens ONE system. The machine works with very high accuracy. Offer number V(K)-6899

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange: mounting flange -Outside: Ø 198 mm -Bolt circle: Ø133 mm / M12 -Hole: Short taper 6, cone Ø 102 - 105 mm -Dimensions total Ø 198 x 55 mm -Weight: 4.0 kg Ceb Hb Hzowcd A Ijvogt

Condition: ready for operation (used), Year of construction: 1999, KIA Turn 21 Fanuc OT Control Swing Over Bed 550mm Max Turning Length 500mm X Axis Travel 210mm, Z Axis Travel 430mm, 10 Turret Station tailstock, Tool Presetter Collet chuck with collets Swarf Conveyor Cjb Hb Hzjwfc Iuovogt Video available!

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t Ceb Hbst Tqgxo Hzvsgt

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC Control: Siemens SINUMERIK 840D Storage location: Halberstadt Ceb Hb Hjwfy Irjzvogt Country of origin: Taiwan Machine-No.: 79XXX Servo motors (X/Z axes): 5,5 / 5,5 kW C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 3000 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Cjb Hb Hzowg Takjvegt Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 1995, turning height: 3,200 mm, turning diameter: 3,300 mm, feed length Z-axis: 1,700 mm, faceplate diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 2,000 rpm, year of last overhaul: 2020, CNC vertical lathe with C-axis + milling spindle Doerries Scharmann VC-3500/300 year of construction 1995 Fanuc 18iTB Faceplate diameter: 3,000 mm Faceplate load: max. 50,000 kg Turning diameter: max. 3,300 mm Turning height: max. 3,200 mm Travel distances: X -2,550 / +2,550 mm Z 1,700 mm Crossbeam vertical travel: W 1,800 mm Support sleeve size: 250 x 250 mm Rapid traverse: X/Z 6,000 mm/min. Table drive power: 105 kW Table speeds: 0.6 - 110 rpm. Torque at table: max. 140,000 Nm C-axis: 0.001° Tool magazine positions: max. 27 Driven positions: max. 17 Milling spindle speeds: 10 - 2,000 rpm Milling spindle drive power: 22 kW Tool holder: BT50 Accessories: Extended + retrofitted Retrofit + update/extension 2020 Condition: Very good Ceb Hb Hzsqy Nmaovogt Offer number V(K)-6834

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm Cob Hb Hzswcdw Eevsgt -Weight: 2.2 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,300 h, General Data Measurements width 2300 mm Measurements depth 5500 mm Measurements height 2400 mm Machine weight 8500 kg Control Unit Model 31i Brand FANUC Main Drive Number of spindles 3 Spindle speed range 3000 rpm / 4000 rpm Cgjb Hb Hzewgf Dbevst Spindle motor power 30 kW / 24 kW Spindle bore 94 mm / 65 mm Tool taper HSK - 63 Number of axis 5 Movement X-Axis Movement 510 mm X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement mm Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 1300 mm Z-Axis Rapid Traverse 12000 mm/min B-Axis Movement +/- 105° C-Axis Movement Increment 0.001°. Additional Equipment Lubrication tank with pump. Main spindle // counter spindle // milling spindle This 5-axis Biglia B1200S SMART TURN lathe was manufactured in 2014. It features a Fanuc 31i control unit, a maximum turning diameter of 750 mm, and a turning length of 1260 mm. Equipped with a tool magazine capacity of 40 posts and a milling head maximum speed of 8000 rpm. Ideal for complex machining tasks, the Biglia B1200S SMART TURN we have for sale represents a significant opportunity. For more information about this lathe, please reach out to us. Application Types Turning

Condition: used, Year of construction: 1998, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Lathe Type INTEGREX 50 Year 1998 Cebev Iv S Te Hb Hzvjgt No Tailstock Mazatrol T Plus CNC The Machine Is Complete With Chip Conveyor With All Documentation With 3 Tool Cabinets

Condition: good (used), Year of construction: 2023, Ref. -No.: 10529 Manufacturer: INDEX Type: B 400 Year of construction: 2023 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Halberstadt Country of origin: Germany Machine-No.: 251XXX X stroke: 990 mm Bar passage: 82 mm Swing diameter over plan guidance: 650 mm Chuck diameter: 315 mm Tailstock mount: MK5 / SK 30 Turning Length: 750 mm Turning Diameter Over Bed: 770 mm Max. Workpiece Weight: 10 kg Bezel diameter (inside): 152 mm Cgsbjwfy Ile Hb Hzvst Turret places: 12 Pcs Tool places: VDI 30 / VDI 40 Tool Length: 250 mm Workpiece diameter: 82 mm Connected Load: 47 kVA

Condition: good (used), USB, 22kw, gearbox, 3400rpm, A2-8 spindle 102mm bore, chipconveyor, Toolsetter, rigid tapping, M19, VDI40 12 station turret, part catcher, Hainbuch SK80, Iemca bardeeder 1600mm Cgeboviyu Ue Hb Hzvjt

Condition: used, Year of construction: 1988, Functionality: unexamined, machine/vehicle number: 00374030, turning length: 2,000 mm, turning diameter over cross slide: 770 mm, turning diameter: 770 mm, spindle speed (max.): 1,800 rpm, tool mount: 40 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 2,125 mm, total length: 5,690 mm, chuck outer diameter: 250 mm, total width: 2,900 mm, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, The Heyligenstaedt 24 U / 2000 CNC lathe, built in 1988, is in very good and well-maintained condition, but was last used in production in 2023. The machine is equipped with extensive accessories (see photos) and can be inspected at the production site AQUAtec Machining AG Industriepark, 6460 Altdorf, Switzerland, upon request. Cjbswfqvme Hb Hzvogt

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Bolt circle: Ø133 mm -Hole: short cone 6, cone Ø 103 - 105 mm Cjb Hb Hzjwcdv Uovegt -Dimensions total Ø 250 x 75 mm -Weight: 8.4 kg

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW Cgob Hb Hov Raatjzvet - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Machine type: Center lathe Manufacturer: WEILER Model: Commodor B Year of manufacture: 1988 Condition: very good Type of offer: used machine Technical specifications: Center height: 192 mm Center width: 1000 mm Spindle bore: 56 mm Speed range: 25 – 2000 rpm Drive: 2.0/4.0 kW Note: Cjb Hb Hzjwfq T Esvjgt 3-axis digital readout, Forkardt three-jaw chuck Ø 200 mm with an additional set of soft jaws on hard base jaws, Röhm four-jaw chuck Ø 250 mm with interchangeable jaws, collet chuck with 40 collets 4 – 42 mm, Multifix quick-change tool holder size 100 mm. B with 5 inserts, 2 live center centers, keyless drill chuck, various taper sleeves, fixed center centers, turning tools, operating tools, etc. Operating manual Weight: 1,500 kg The machine is in very good, ready-to-use condition and can be inspected and demonstrated at our premises. We would be pleased if our offer meets with your interest. Subject to errors, changes, and prior sale.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10523 Manufacturer: DMG GILDEMEISTER Type: NEF 600 Year of construction: 2009 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Halberstadt Country of origin: Germany - Japan Turning Speeds: 4.000 RPM Tool holder type: VDI 40 DIN 69880 X stroke: 398 mm Y stroke: 1250 mm C-Axis: ° Turning Length: 1.200 mm Swing Diameter Over Bed Slide: 490 mm Spindle Diameter In Front Bearing: 160 mm Spindle Bore: 118 mm Spindle nose: 220h5 Spindle Speed Min.: 3.500 RPM Max. Torque: 790 / 590 Nm Rapid Travel Speed X-Axis: 30 m / min Rapid Travel Speed Z-Axis: 30 m / min Main Drive: 20 - 4000 kW Total Power Requirement: 50 kW Max. Rod diameter: 92 mm Spindle 1 chuck diameter: 315 mm Cob Hjwfy Hzjb Hzvsgt Max feed rate: mm / min Power Capacity: 37 / 28 kW Turret places: 12 Pcs Machine length: 6500 mm Machine width: 3500 mm Machine Height: 2300 mm Weight Of The Machine Ca.: 5,3 t Further information: Tailstock: Tailstock displacement: 1,150 mm Clamping force: 12.5 kN Tailstock holder: MK 5 Machine is still in production and can be inspected at any time.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Cgeb Hbewfy D Tj Hzvst Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160/1840mm mm Distance Between Centres: 800 / 1500 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Taper: ISO 50 Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. Csb Hbewfy A Aj Hzvsgt The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder Cob Hjwfy Aceb Hzvsgt - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Ceb Hb Hewfyzrszvsgt Storage location: Halberstadt Country of origin: Germany

Condition: good (used), Year of construction: 1998, Ref. -No.: 10418 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 1998 Storage location: Halberstadt Country of origin: Germany Csb Hb Hzjwfyy Ujvjgt work spindles: 6

Condition: good (used), Year of construction: 2006, Ref. -No.: 10402 Manufacturer: GILDEMEISTER Type: Gildemeister GMC 35 ISM Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840D PowerLine Storage location: Halberstadt Country of origin: Germany Machine-No.: 5702-0027 work spindles: 6 Turning Speeds: 6300 RPM C-Axis: Ausricht- und Schalteinrichtung Spindle passage: 32 mm Spindle power: 6 x 4 kW Capacity At 100% Load: 6 x 4 kW Max. Torque: 6 x 15 Nm Rapid Travel Speed X-Axis: 12 m / min Rapid Travel Speed Z-Axis: 12 m / min Travel -X Axis: 68/100 mm Cjb Hbswfyy Is Hzvogt Travel -Z Axis: 68/100 mm Machine length: 7000 mm Machine width: 1800 mm Machine Height: 2400 mm Connected Load: 107 kVA Further information: Features: 5 cross slides for machining in X and Z Pick-up spindle freely programmable in position 6 5 front spindles of which 5 can be driven 4 U-axes electrically prepared 1 axis for back machining on the pick-up spindle Kraft and Bauer CO² fire extinguishing system Hinged belt chip conveyor Artis tool breakage control Tool carrier: Number: 12 Axes X/Z: 68/100 mm Rapid traverse X/Z: 12 m/min Tools for backworking: 1 Bar loading magazine: IEMCA Sir 36P; type 33 F Year of manufacture 2006 Serial number 020440MA04 Bar length 3000mm Knoll high pressure system AE1114: Year of construction 2006 Filter system Pumps 5Bar and 40Bar individually adjustable for the processing steps Heat plate exchanger Lifting pump from the chip conveyor Machine is in operation under power and can be inspected by appointment.

Condition: good (used), Year of construction: 2021, Ref. -No.: 10372 Manufacturer: STAMA Type: MT 733 two plus Year of construction: 2021 Type of control: CNC Cjb Hbjwfyyho Hzvsgt Control: SINUMERIK Siemens 840 D sl Storage location: Halberstadt Country of origin: Switzerland Turning Speeds: 4200 RPM Spindle Speeds: 12500 RPM Tool Taper: HSK T-63 Workpiece Length: 300 mm X-axis travel: 615 mm Y-axis travel: 290 mm Z-axis travel: 500 mm Max. Tool Weight: 10 kg Max. Tool Diameter: 78 mm Max. Tool diameter with 2 free spaces: 140 mm Spindle bearing diameter: 80 mm Number of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / min Max. Feed force: 4000 N Max. Feed force: 8000 kN Acceleration (X): 7 m/s² Acceleration (Y): 9 m/s² Acceleration (Z): 13 m/s² Further information: - Ball screw - Automation - Workpiece loading/unloading chuck parts with X- / Z- gantry loader - Clamping pressure preselection 15 - 50 bar for both spindles - Buffer station for constant short chip-to-chip times - NCU High Performance NCU 730.3.m - Magnetic gripper

Condition: good (used), Ref. -No.: 10319 Manufacturer: TAKANG Type: TK 430 Type of control: Digitalanzeige ACU-Rite Control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Cjb Hb Hswfyx Rezvogt Swing diameter over bed: 430 mm Bed width: 300 mm Tip length: 1500 Centre Height: 215 mm Bed length: 1600 mm Weight Of The Machine Ca.: 1,3 t