Condition: used, fixed heavy duty steady rest without top! Center height 1040 mm Inner diameter 610 mm Cjlqyodbburo Ng Esgt Weight 600 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm Cjlqewcdytsy Ng Esgt TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Parts feeding via shuttle (included) Two machines are available

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: AH0411, turning length: 700 mm, turning diameter: 310 mm, spindle motor power: 16,500 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,800 mm, total length: 3,700 mm, total width: 2,200 mm, quill stroke: 120 mm, quill diameter: 80 mm, overall weight: 4,200 kg, Equipment: documentation/manual, Turning diameter 310 mm Turning length 700 mm Control Siemens Sinumerik 810 DE Turning diameter over bed 425 mm Main spindle Speed range - main spindle MAX 4,500 min/-1 Drive power - main spindle 16.5 kW Max. torque 280 Nm C-axis 360 ° Chuck diameter 210-52 mm Clamping cylinder 65 mm Bar passage max. 65 / (52) mm Spindle nose A8 DIN 55026 Travel paths: x-axis 230 mm z-axis 740 mm Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 24 m/min Tool turret: Tool positions in the turret 12 pos. driven stations 12 pos. Tool holder VDI 30 DIN 69880 Csljv Df Iisqy Ng Eogt Speed range of driven tools 6,000 min -1 Drive power - driven tools 3.7 kW Max. torque 9.5 Nm Tailstock Quill diameter MK 4 80 mm Quill stroke 120 mm Tailstock displacement 475 mm Clamping force 500 daN Machine weight approx. 4.2 t Space requirement approx. 3.7 x 2.2 x 1.8 m Documentation Chip conveyor Tailstock C-axis Hydraulic unit Coolant device Tool calibration Three-jaw chuck SMW Autoblock BHD 250

Condition: new, Year of construction: 2025, Functionality: fully functional, spindle motor power: 4,200 W, turning length: 180 mm, turning diameter over cross slide: 26 mm, turning diameter: 26 mm, spindle bore: 26 mm, overall weight: 2,400 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, bar passage: 26 mm, feed length Z-axis: 180 mm, machining length: 180 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, warranty duration: 12 months, Equipment: rotational speed infinitely variable, LINEAR LATHE ITWIN S Additionally with swivel head Cgslqy Nsvb Hybjg Eot With a total of 29 tools, complex parts can be machined externally, internally and on the circumference on the iTwin S. The counter spindle allows backworking in one set-up.12 driven tools, 2 C-axes as well as Y-axis offer additional flexibility. The machine is very well suited for machining from bar as well as for machining inserts. As iTwinS, the machine is additionally equipped with a swivel head (B axis) on the main spindle. For inclined machining, 12 driven tools are available. The B-axis makes it possible to use the driven tools flexibly on the face or shell surface (90° swiveling).

Condition: used, machine/vehicle number: 1717, second-hand WEILER PRAKTIKANT sliding headstock and sliding headstock lathe center height 140mm center distance: 500mm spindle diameter: 36mm spindle speeds from 42-2,000 rpm with RSF 3-axis digital readout chuck protection electrically fused Cgjlqy Njuqb Emsg Eet with Multifix steel holder head size A with 3 inserts Lever collet device with 15 collets. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Year of construction: 2005, Condition: ready for operation (used), Turning diameter: 380mm, turning length: 511mm, swing diameter over bed: 675mm, spindle bore: 65mm, bar capacity: 65mm, speed: 5000rpm, tool positions: 12, travel Y: +/-50mm, travel X/Z: 230mm/575mm, machine dimensions X/Y/Z: approx. 2800mm/1800mm/1850mm, weight: approx. 5100kg, control: Mazatrol 640T Nexus. On-site inspection is possible. Cgelqy Ngowhfm Se Est

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Celqsuy S Sdey Ng Eegt Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: used, turning diameter: 560 mm, center width: 2,000 mm, spindle speed (max.): 1,800 rpm, bed width: 432 mm, overall weight: 4,000 kg, three-jaw chuck diameter: 315 mm, Used universal lathe FAT Poland Model: TUR 560 x 2000 Cjlqy Neuqw Nbjg Eegt three-jaw chuck' Digital readout 2 axes Multifix center

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, collet bore: 32 mm, turning length: 320 mm, turning diameter: 32 mm, total length: 2,640 mm, total height: 1,840 mm, total width: 1,400 mm, spindle speed (max.): 8,000 rpm, overall weight: 3,500 kg, rotational speed (max.): 8,000 rpm, coolant tank capacity: 16,000 ml, power: 75 kW (101.97 HP), Equipment: rotational speed infinitely variable, Doosan Puma ST32G Sliding Head CNC Lathe Machine Type: Sliding Head CNC Lathe Year: 2013 - Installed in late 2014 Control: Fanuc Series 31i - Model B Condition: Excellent Includes LNS Express 332 S2 Bar Feed LNS Swarf Conveyor Losma Mist Extractor LNS Mist Extractor(Spare) Parts Conveyor Manuals Technical Specifications Max Machining Diameter: 32mm Max Main Spindle Stroke: 320mm Max Drilling Capacity: 13mm Max Tapping Capacity: M12 x 1.75mm Max Milling Capacity: 8mm Main & Sub Spindle Speeds: 8000rpm Main Spindle Power: 7.5kW Sub Spindle Power: 3.7kW X1 Axis Travel: 114mm Z1 Axis Travel: 320mm Y Axis Travel: 404mm C1 Axis Travel: 360 deg X2 Axis Travel: 393mm Z2 Axis Travel: 343mm C2 Axis Travel: 360 deg Rapid Traverse all Axes: 32m/min Front Tool Stations: 20 Back Tool Stations: 4 Driven Tool Speeds: 8000rpm Coolant Tank Capacity: 160L HP Coolant: No Coolant Flow Rate: 200L/min Power Supply: 22Kva Machine Dimensions: 2640 x 1400 x 1840mm Machine Weight: 3500kg Cgolqy Notwy N Ejg Eot

Condition: new, Year of construction: 2025, LINEAR LATHE IULTIMATE 2S Additionally with swivel head on main and counter spindle With 6 linear axes, including two Y-axes, two C-axes, 4 spindle axes and 48 tools (24 of which are driven), complex workpieces can be machined in a single pass. All linear axes are equipped with MITSUBISHI servo motors. These are directly coupled to the ball screw, and ensure high efficiency in power transmission with maximum accuracy. The C-axes and drive motors are also equipped with reliable MITSUBISHI servo technology. Two programs (workpiece front and back) can be machined independently on the main and counter spindles. Synchronous tapping under speed is also possible. In the iUltimate, 2 machines are integrated in one, so to speak. As iUltimate 2S, the machine is additionally equipped with a swivel head (B axis) on the main and counter spindle. For inclined machining, 24 driven tools (12x HS / 12x GS) are available. Cjlqjhxywcsy Ng Eogt The B-axis makes it possible to use the driven tools flexibly on the face or matel surface (90° swiveling).

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm Cslqy Nevzy Dtog Eegt - Chuck diameter 250/315 mm - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Condition: new, turning length: 440 mm, turning diameter: 550 mm, Siemens system Maximum Swing Over Bed 550mm Maximum Machining Diameter 450mm Maximum Machining Length 440mm Maximum Swing Over Slide 320mm Spindle "200-A2-6 NN3020-100BTR/NN3018" Spindle speed range 0-4500rpm Spindle bore 66mm Chuck Size 8''hydraulic chuck Ballscrew Specifications X-3210-THK/Z-3210-THK Cgslqyewfqkwj Ng Eot Linear Guide Specifications X-35-PMI/Z-35-PMI Ballscrew Bearings X-2562/Z-2562 X-Axis Travel 510mm Z-Axis Travel 620mm Y-Axis Travel ±50mm Tailstock sleeve travels 450mm Tailstock sleeve taper MT5# X/Z Axis Rapid Traverse Speed 24/24m/min X/Z Axis Repeatability 0.003mm Power of Servo Spindle Motor 11KW Overall Dimensions 2405*1767*1740mm Weight (Approx.) 3500KG Tailstock type Servo tailstock Power turret BMT45Y-15-364

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) Cgolqy Nouy S R Tog Ejt - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Colqy Nsvq Ibxjg Eegt Year of manufacture 2015 4 jaw faceplate Acu Rite digital display Coolant tank Longitudinal stop Chip guard at the rear Chuck guard

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 76 mm, turning diameter: 920 mm, turning length: 4,000 mm, Capacity 4000 x 760 mm Bore 76 mm Fast 4-jaw chuck Cslqy Neu E Twljg Esgt Multifix type C turret Stand

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 3153 mm Cgjlqy Ngowdy Tfj Eet Measurements depth 2500 mm Measurements height 1603 mm Machine weight 5200 kg Control Unit Brand FANUC Model MSC-701 / MAPPS III Main Drive Spindle speed range 5000 rpm Spindle motor power 7.5/5.5 kW Number of axis 5 This 5-axis MORI SEIKI NZ-S1500 was manufactured in 2009, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-S1500 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1990, CNC Turning Machine Fabr.MONFORTS Type: RNC 4 Year 1990 Control FANUC 10TF-FAPT. Turning diameter max:250 mm Cgslqy Nsvgcwaog Eet Turning length : 1000 mm Spindle speed: 70-4000 rpm Spindle passage: 65 mm Hollow clamping device Chuck diameter 250 mm Röhm Tool turret 12 Pos.VDI 40 Tailstock MK 4 Complete machine documentation, chip conveyor. Complete weight approx. 7 500 kg.

Condition: new, spindle bore: 82 mm, turning length: 2,000 mm, turning diameter: 500 mm, Siemens 808DA system Chuck size 10''hydraulic hollow chuck Maximum swing diameter over bed 500mm Maximum swing diameter over carriage 290mm Cslswfqkkoqy Ng Eegt Bed guide rail width 405mm Maximum machining length 2000 Spindle speed range 45-1600rpm Spindle through hole 82mm Spindle nose A2-8 Spindle taper Metric 90# X-axis travel 295mm Z-axis travel 2000 X/Z axis rapid traverse speed 6/8m/min Tool holder type Electric tool post Number of tool positions 4 stations Tool holder size 25*25 Tailstock sleeve diameter 75mm Tailstock sleeve travels 150mm Tailstock live center taper MT5 Main motor power 7.5KW Cooling pump power 210W Machine overall dimensions 3800*1600*2000 Net weight (approx.) 2700kg

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW Cjlqswbd Iboy Ng Ejgt -Dimensions: 1660/1700/H470 mm -Weight: 224 kg

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Cgolou Tvdboqy Ng Est Only available as a set

Condition: ready for operation (used), Year of construction: 1984, CNC numerical Colqy Ngjv Nqice Esgt 1600mm platen, maximum diameter 3200mm 1600mm clearance height 20 tons permissible weight 160 rpm maximum rotation speed

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 5120 mm Measurements height 2320 mm Machine weight 8300 kg Control Unit Brand FANUC Model F31iA / MAPPS IV Main Drive Spindle speed range 6000 Spindle bore 73 mm Number of axis 5 Turret Number of turrets 2 Media Chip conveyor Yes Additional Equipment Hainbuch SPANNTOP nova standard chuck combi Axfix size 65 // Hainbuch SPANNTOP nova standard chuck combi Axzug size 65 Knoll compact filter; KF 110/500 Delivery pressure 70 bar, compact belt filter system for cleaning cooling lubricants with filter fleece 2x high-pressure pumps (main / counter spindle) 500 I coolant tank Float switch Celqy Nswdy S Ujg Esgt Pressure relief valve Vario SPB-H-15 7 pressure stages via M command // High pressure system included Transformer 95.00 kVA IEMCA bar loader; Master 80HF incl. accessories for bar processing up to 3.3 meters Bar diameter max. 80 mm This 5-axis MORI SEIKI NZX2000/800SY was manufactured in 2012, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures reliable performance and durability. Consider the opportunity to buy this MORI SEIKI NZX2000/800SY horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1980, CNC Karuselldrehmaschine Fabr.JUNGENTHAL type: JU8F BJ. 1980 Modenisiert 2005 control HEIDENHAIN Manaul plus 4110. Max.Drehdurchmesser: 930mm Cgelqy Ngjdnznkj Est Circular diameter max: 1100 mm Internal breakdowns min: 300 mm Turning length max. 520 mm Spindle speeds: gear-unit stage 1: 0-110 RPM Gear-unit stage 2: 110-300 RPM Power of main motor screw: 55-70KW Complete machines documentaries available.

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Cgslovi Hryjqy Ng Eet Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 Cgjlqevbb U Hoy Ng Eot with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Machine documentation available .