Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm Cob Esqvd Iuexmtgsgt max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2007, turning diameter max. 366 mm turning length 705 mm control M 720 BM MAPPS 3 greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm Cgob Exsvh Hx Djmtgot standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 254 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm tailstock 734 mm taper of center MT 3 diameter of quill 80 mm feed speeds max. 30.000 mm/min rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 total power requirement 43 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 MC / 700 - Tool-Drive - C-Axis - Tailstock

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm Cgeb Exjvfxmnsmtgjt travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm Cob Esu Hra Ijxmtgegt CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Csb Exmovfxmhstgsgt Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control Fanuc 18i Main-/Counter -spindle turning speeds 6.000 U/min y-axis +/- 40 mm number of tapers in turret head 12 tool holder VDI 25 Dimensions (L x W x H) 3.838 x 820 x 1.900 mm weight of the machine 4.400 kg CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-5 with main and sub-spindle, Y-axis, turret configured for driven tools, and equipped with a bar feeder. The machine has 18.600h running hours. Scope of delivery / Accessories: Clamping devices: + 15x collets SK42 (for Hainbuch Spantop Nova) + Manual wedge bar chuck (like new) with various jaw sets (Rota-S-plus) + Various jaw sets for pneumatic chucks (Graber) Tool holders (Driven tools): + 1x double holder for main and sub-spindle + 3x axial for main spindle + 3x radial + Approx. 15x various holders for boring bars and turning tools Additional accessories: + Hydrobar bar feeder for 1.5m bars Cjb Eov Htkqjxmtgogt The machine is in good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-5 | 42STM | 42STM5 | 42 S TM-5

Condition: used, Year of construction: 2006, spindle passage 65 mm Csb Esvzcnzexmtgogt spindle diameter in front bearing 110 mm number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. The machine only has 17.000 hours of Power-On. The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Year of construction: 2005, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, Csb Eeh Nhltoxmtgegt - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Year of construction: 2007, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, Ceb Exmtsh Nhlwjgsgt - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Condition: used, faceplate diameter 4.000 mm Cob Eshwgn Esxmtgogt travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Condition: used, Year of construction: 2000, max. swing diameter over bed 450 mm max. turning diameter 298 mm centre distance ~ 580 mm control SIEMENS 810D travel -x axis 221 mm travel -y axis 590 mm max. Spindle speed 6.000 U/min. spindle bearing diameter 85 mm spindle bore 55 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC lathe | SPINNER - TC46MC equipped with a turret for driven tools, bar feeder and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Cgobsvr Hmve Exmtgst #Tags: 46MC | 46-MC | TC-46 | TC 46 MC

Condition: used, Year of construction: 2000, - - - - - - - - - - - - - - - - - - Cgjb Exmevnwfzotgst - - - - - - - - - Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, spindle hollow 65 mm spindle diameter in front bearing 100 mm clamping chuck diameter 165 mm max. turning diameter 200 mm max. swing diameter 420 mm turning speeds 5.000 U/min control Siemens 840 D sl CNC Turning- and Milling Center | INDEX - G200 equipped with a turret for driven tools as well as y- + B- axis. The INDEX - G200 has been overhauled by RSV-Service GmbH (including control conversion) in 2014. The machine only has 19.000 hours of Power-On. Further information: - Please note that the bar loader is not included in the scope of delivery! The machine videos from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G-200 | G 200 Cgsb Exmjvzcp Ejtgst

Condition: used, Year of construction: 2007, swing diameter 640 mm max. turning passage 640 mm control Simens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - bar material dia. 65 mm chuck diameter 200 - 315 mm spindle bore diameter 80 mm diam. of main spindle in forward position 120 mm --- Subspindle --- - - - - - - bar material dia. 65 mm chuck diameter 315 mm spindle bore diameter 80 mm forward bearing diameter 120 mm - - - - - General data - - - - - - - - - - - spindle distance 1.500 mm Cgjb Eevx U A Sjxmtgst turning length 1.185 mm Main-/Counter -spindle turning speeds 5.000 U/min driven tools turning speeds 12.000 U/min Slide cross X1, Y1: 550 / 180 mm Slide cross Z1: 1.185 mm Slide cross B1: 240 ° Slide cross X2: 180 mm Slide cross Z2: 1.050 mm Slide cross Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and a portal loading system (Pneumotec Portalsystem S-01623a). The machine has only approx. 32.000h operation hours. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm Cgob Exmtsvzcplegot turning length 450 mm travel -x axis 200 mm control Fanuc 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: used, Year of construction: 2007, Swing over bed 923,8 mm Cgsb Exjvwgkrsmtgot Swing over cross slide 755 mm max. turning diameter 356 mm Max. Turning length 515 mm control MSX-850 III travel -x axis 260 mm travel -y axis -50, +50 mm travel -z axis 590 mm travel - z axis (spindle 2) 624 mm driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - NL1500SY / 500 equipped with main/counter spindle, b- + y- axis, a turret for driven tools and chip conveyor and loading and unloading system (alphaMAX). The machine has only 3.400h processing time hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NL1500SY500 | NL 1500 SY / 500 | NL-1500SY / 500 | NL-1500 SY / 500

Condition: used, Year of construction: 2008, swing over bed 923.8 mm Swing over cross slide 755 mm max. turning length 510 mm bar capacity 65 mm control MSX-850 III main spindle speeds 5.000 U/min Cgsb Exjvpr Sxemtget travel -x axis 260 mm travel -y axis 100 (+/- 50) mm travel -z axis 590 mm CNC Turning- and Milling Center | MORI SEIKI - NL2000SY / 500 equipped with main/counter spindle, y- axis, a turret for driven tools and chip conveyor Scope of delivery: + 2x diven tools horizontal + 2x driven tools vertical + 2x passive tool holders + chip conveyor + power chuck (KITAGAWA) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NL2000SY500 | NL 2000 SY / 500 | NL-2000SY / 500 | NL-2000 SY / 500

Condition: used, Year of construction: 2003, bar material dia. 75 mm max. max. swing dia. 540 mm turning length 650 mm control FANUC Oi-TB machine weight ab. 6.200 kg CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y equipped with chip conveyor. Additional equipment: Csb Exmevzcqvetgsgt + C axis + Y axis + driven tools The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y

Condition: used, Year of construction: 2011, work travel X:320 & Z:1250 mm rapid traverse X:20 & Z:40 m/min control INDEX - C200-4D --- MOTOR MILLING SPINDLE --- ----- tool taper HSK A63 turning speeds 12000 U/min Power 27,5 KW front bearing 80 mm turning speeds 3000 U/min MAIN SPINDLE D102 direct drive ----- Ceb Exmtst Ukw Togegt spindle diameter in front bearing 1200 mm spindle passage 102 mm forward bearing diameter 170 mm CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300

Condition: used, Year of construction: 1998, - - - - - - - - - - - - - - - - - - - - - - - - - - - Csb Esvnwf Ioxmtgsgt Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. A machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Year of construction: 2005, Condition: used, max. turning diameter 540 mm max. turning length 1.020 mm bar capacity 65 mm Spindle speed 5.000 min -1 driven tools turning speeds 10.000 U/min control FANUC 18i-TB Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm machine weight ab. 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Cob Exelmr Eiemtgsgt Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm travel -y axis 180 mm b-axis 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Cgsb Esvzcnbsxmtgot - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300

Condition: used, Year of construction: 2008, max. swing diameter over bed 510 mm max. turning diameter 260 mm Max. Turning length 540 mm travel -x axis 240 mm center height over bed 260 mm control FANUC 21i-TB spindle bore 77,5 mm no. of tools in turret 12 x tool taper VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 Cob Exsvzcqpemtgsgt The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8

Condition: used, Year of construction: 2015, max. bar material dia. 32 mm Number of axles 7 St. numbers of positions in the tool changer 23 Stk./pcs. number of driven tools 6 Stk./pcs. driven tools turning speeds 6.000 U/min control FANUC - F 32i-B --- Main- / Counter- spindle --- - - - - - - max. Spindle speed 7.000 U/min. Cgsb Exmjvzcqcjtgot c-axis 0,001 ° - - - - - - Dimensions (L x W x H) 3.800 x 1.400 x 2.200 mm weight of the machine 3.100 kg Turning Automatic Lathe - swiss lathe | STAR - SR32-JN Scope of delivery / equipment: + Main/counter spindle, + 2x tool turret, + chip conveyor, + bar loading magazine: FMB turbo RS 3-36-3200 + part ejection, + part conveyor belt The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SR 32JN | SR 32 JN | SR32JN | SR-32 | SR 32

Condition: used, Year of construction: 2008, greates pass round over bed 600 mm swing diameter over face slide 500 mm control Siemens Sinumerik 840 PL max. turning diameter 430 mm Max. Turning length 744 mm max. bar material dia. 65 mm travel -x axis 270 mm travel -z axis 750 mm travel -x2 axis 205 mm travel -z2 axis 750 mm travel -y axis 100 (+/- 50) mm main spindle speeds 0 - 5.000 U/min Subspindle speed 0 - 7.000 U/min number of tapers in turret head 2x 12 tool taper VDI 30 CNC Turning- and Milling Center | EMCO - HYPERTURN 665MCPlus with main and counter spindle, C and Y axis, 2 turrets aligned for driven tools, and equipped with a bar feeder Irco Profimat as well as a coolant system Knoll SF 1000/Turbo- 1. The machine has approximately 26,710 hours of production operation. Scope of delivery / Equipment: + 2 spindles: main and counter spindle with C-axis + 2 turrets for driven tools (each with 12 stations) + Upper turret equipped with Y-axis + Internal cooling + Chip conveyor + Bar feeder Irco Profimat + Driven tools (straight and angled) + Chucks for main and counter spindle + Extraction system + Workpiece discharge device with conveyor belt + Coolant system Knoll SF 1000/Turbo-1 + Various holders, approx. 80 pieces VDI 30 Cgsbov Rgzko Exmtgst + Boring bar holders + Jaw holders The machine is in well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN