Condition: used, Functionality: fully functional, CNC Bed-Type Milling Machine Manufacturer: Fritz Heckert Type: FKrSRS Control: Heidenhain 426 Table length: 1600 mm (length 3650 x width 2980 x 3620 mm) Clamping surface: 500 x 1600 mm (width) Cobu Hsv U A Uuegrasgt Clamping slots: 6 Upper width: 18 Center-to-center distance: 80 mm Maximum workpiece weight: 2000 kg Adjustment travel: Longitudinal X-axis: 1210 mm Transverse Y-axis: 515 mm Vertical Z-axis: 575 mm Rear edge of clamping table to column sliding surface: 245 - 760 mm Front edge of milling spindle to table surface: 105 - 680 mm Center of milling spindle to column sliding surface: 775 mm Number of milling spindles: 6 Tool holder: SK 50 Diameter of front milling spindle bearing 100 mm Maximum torque 210 kpm Largest cutterhead diameter for machining cast iron/steel/aluminum 200 / 200 / 250 mm Speeds 18 Range 28 - 1400 rpm Increment 1.25 Full-groove speed 90 rpm Feeds Adjustable in the x / y / z axes in increments of 1 mm/min. Set via F command 10 - 4000 mm/min. Rapid traverse 5000 m/min. Milling spindle drive power 18.5 kW Torque per feed spindle 49 Nm Operating voltage 380 V Frequency 50 Hz Total power consumption 39 kW

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m toolpiece turning speed range 0- 5000 U/min work piece power 5,5 kW main drive motor 15/22 kW Cgjbov T Np Aju Hgrajt weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: as good as new (ex-display), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Cgjbu Hjnxi H Usgraot Chuck guard Rear splash guard

Condition: excellent (used), Year of construction: 2018, EMCOTURN E 65 SMY BigBore Siemens 3-axis CNC lathe with counter spindle and driven tools including Y-axis AND C-axes Year of manufacture 2018 30,000 operating hours Machine was used for plastics machining. Machine is in operation and can be tested. Chip conveyor has been recently overhauled. Highly efficient universal lathe for complete machining with stable and precise linear guides. State-of-the-art SINUMERIK 828D control technology with ShopTurn dialog programming. Main spindle: • A2-6" connection (DIN 55026) • Max. bar capacity ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Counter spindle: • A2-6" connection (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: 12-station IDI 30 radial tool turret with directional logic for up to 12 driven tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel range: +/-40 mm - Hollow clamping cylinder including draw tube - C-axis for main/counter spindle Cgsbu Hgrjwf Ni Ssaot - Mechanical spindle brakes - Sinumerik 828D control system with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive/Ethernet - 10.4" TFT color monitor - 3D simulation, and much more - Machine light - Coolant system with 3.5 bar coolant pump - Hydraulic unit - Chip conveyor interface - Documentation SuperBigBore 95: Allows bar passage up to 95 mm instead of the standard 65 mm (main spindle). Drawbar connection: M102 x 2 Spindle connection (DIN 55026): KK8 Max. speed 3,500 rpm Max. torque 380 Nm Max. power 22 kW Max. chuck size 250 mm (315 mm) Differential pressure clamping for main and counter spindle: -Sensitive adjustment of the spindle clamping pressure -Counterpressure principle -Manually adjustable hydraulic clamping pressure analog/digital converter -Display on the machine control -Adjustment range 6-60 bar -The clamping pressure on the workpiece depends on the clamping cylinder and the clamping device Electronic handwheel Parts collecting device E65 Bar loader: EMCO SL1200 FOR E45/E65/MT45/MT65/ HT45/HT65-PM INCL. EMCO INTERFACE short bar loading magazine for the automatic feeding of bar stock with diameters from 8 to 95 mm and lengths up to 1200 mm. The loading magazine is particularly characterized by its compact footprint and ease of use. EMCO Interface included! Tool measurement Multiflow cleaning gun Chip conveyor 1200 mm: Hinged belt conveyor with ejection height of 1200 mm Suitable for: Long steel chips, chip balls, and wool shavings Dry and wet machining 14 bar high-pressure coolant system Coolant can be switched to air through the tool turret: - Programmable via M command

Condition: repair required (used), Year of construction: 2012, Functionality: limited functionality, machine/vehicle number: 232-0001, spindle speed (max.): 15,000 rpm, spindle speed (min.): 1 rpm, bar passage: 10 mm, total width: 870 mm, total length: 1,670 mm, total height: 1,650 mm, turning diameter: 6 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 1,700 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, Equipment: cooling unit, NO BAR FEEDER! General Data: - Width: 870 mm - Depth: 1670 mm - Height: 1650 mm - Machine weight: 1700 kg Control: - Brand: FANUC - Model: 32i-MODEL B series Main drive - Number of spindles: 2 - Spindle speed range: 15,000 rpm - Number of axes: 5 Workpiece: - Workpiece diameter: 6 mm Cgjbu Hgjv Tfx Herajt Additional Equipment: - Kraft and Bauer fire extinguishing system - High-pressure oil system This 5-axis TORNOS Micro 8 Swiss lathe was manufactured in 2012. It features a FANUC 32i-MODEL B series control, a spindle speed of 15,000 rpm, and a maximum diameter of 6 mm. If you are looking for a high-quality lathe, you should consider the TORNOS Micro 8, which we have for sale. Contact us for more information about this machine. Repair required: Encoder defective. Spindle stored unchecked (repair costs approximately €1,000). According to the customer! There may be deviations between the stated and actual values, which must be confirmed by the sales representative.

Year of construction: 1999, operating hours: 55,234 h, Condition: ready for operation (used), General Data Measurements width 2100 mm Measurements depth 2660 mm Measurements height 1780 mm Machine weight 6000 kg Control Unit Model U - 100L Main Drive Number of spindles 2 Cjbu Hjwg Ib Nsgrajgt Spindle speed range 6000 rpm Spindle motor power 7.5 kW Spindle bore 53 mm Movement X-Axis Movement 195 Z-Axis Movement 700 Turret Number of turrets 2 Additional Equipment Number of tools: 12 This 3-axis Okuma LT 10-M horizontal turning machine was manufactured in 1999. It features a maximum turning length of 130 mm and a turning diameter of 210 mm. With a spindle speed of 6000 rpm and motor power of 7.5 kW, it's designed for precision. Ideal for those looking to buy this Okuma LT 10-M horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1995, Functionality: fully functional, Traub TNL 16 G, built in 1995, TX8F, machine number >200 (+ another machine available, Traub TNL16 G, built in 1994, TX8F) Y-axis, C-axis, rotary tool drive, 2 turrets, counter spindle, Iemca Mini Boss 325 CNC loading magazine Chip conveyor with coolant pump and tank Workpiece removal device (Sore) Cgebujwgalts Hgrajt Parts conveyor belt Approx. 49,000 spindle hours Live operation, can be viewed in production until March 31, 2025 Approx. 2-3 weeks from order

Condition: used, Year of construction: 1986, turning diameter over bed 330 mm turning diameter over slide rest 210 mm turning length 635 mm turning speeds 58 - 2500 U/min centre height 165 mm spindle bore 38 mm total power requirement 2,5 KW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,6 x 0,9 x 1,65 m Center Lathe Csbuewb Hz De Hgrajgt - Digital Display - 200mm 3-Jaw Chuck - Quick-Change Tool Post including 12 Tool Post Holders - Chuck Guard - Chip Tray - Live Center - Coolant System - Foot Brake - Emergency Stop Device - Machine Feet

Condition: good (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 9/0002A/00053, SPECIFICATION Centre height 315mm Distance between centres 1500mm Swing over bed 635mm Swing over cross slide 390mm Spindle bore (max. bar dia) 115mm Spindle nose mounting D1-11 Camlock Taper in spindle nose and tailstock barrel No. 6 Morse Swing in gap 900mm Width of bedways 480mm Total travel of cross slide 380mm Total travel of top slide over bedways 165mm Cgjbu Hgsvupnhsrajt Total travel of tailstock barrel 190mm Spindle speeds (24) 6.3 – 1250rpm Drive vee belt and clutches Spindle motor 15kW Whitworth threads (88) ¼ - 112TPI Diametral threads (41) 1-60DP Metric pitches (70) 0.2 – 112mm Module pitches (37) 0.3 – 24 MOD Machine in Metric execution   MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 off toolholders High speed threading unit Bedstop Rotating centre Stationary steady Rapid power traverse to saddle Lighting Coolant system Chuck guard

Condition: excellent (used), Year of construction: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Cgjbu Hgewf I Rzorast Operating hours: 14,100 hours Including various accessories

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate Cgebu Hgrsv Sy Awsast -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Bolt circle: Ø133 mm -Hole: short cone 6, cone Ø 103 - 105 mm -Dimensions total Ø 250 x 80 mm -Weight: 6.6 kg

Condition: used, turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 63 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56.0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm bed width 310 mm spindle taper DIN 55027 / 6 feeds - longitudinal 0.022 - 0.8 mm/U feeds - cross 0.011 - 0.4 mm/U thread M 0.3 - 10.0 mm bed width 305 mm voltage 380 V total power requirement 4.0 kW weight of the machine ca. 1600 kg range L-W-H 2320 x 1400 x 1600 mm Machine from a maintenance workshop Lathe with a precision-ground and induction-hardened bed. Ideal for use in workshops and training centers, for example. Equipment: - Robust centerline lathe - FORKARDT three-jaw chuck, Ø 200 mm - FORKARDT four-jaw chuck, Ø 200 mm - Collet chuck (without collets) - 2 chuck keys - MULTIFIX tool holder, size B, with 3 inserts - 1 fixed steady rest - Movable tailstock - Chip guard, rear panel - 2 emergency stop buttons at the front - Adjustable bed stop - Coolant tray Cgebu Hgev Svaforast - Operating instructions (PDF)

Condition: good (used), Year of construction: 2021, Make: SPINNER, Type: TC600 65SMCY, Year of manufacture: 2021, Serial no. AT1207, max. swing Ø 600 mm, max. turning Ø 400 mm, max. turning length 650 mm, travel x/y/z = 275 / Y +50/-40/ 700 mm, max. rapid traverse x/y/z = 15/15/2 m/min, turning spindle 1: max. speed 4,000 rpm, spindle nose A8/DIN, chuck 250 mm, spindle power 21/27 kW, torque 201/258 Nm, turning spindle 2: max. speed 6,000 rpm, spindle nose Ø 110 mm, chuck 165 mm, spindle power 20/12 kW, torque 64/76 Nm, tailstock: taper mount MK4, quill Ø NC-Body, stroke 570 mm, tool turret (driven Tools) 16x VDI30/BMT45; 12x VDI40, counter spindle, Siemens control system, type 840DE, Spinner touch panel, Shopturn handheld unit, measuring probe for tool measurement, Spinner workpiece automation, type Robobox, consisting of a workpiece pallet, 5 drawers, dimensions WxHxD = 800x600x200 mm each, Fanuc loading/unloading robot, type M-10ID12, load capacity 12 kg, reach 1,420 mm Cebev Txq Nou Hgraogt +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Top equipment - Version with long turning length - Driven tools - Bar loading magazine included - Including tailstock with quill Machine type: CNC lathe Manufacturer: Hwacheon Type: Hi-Tech 300 Year of manufacture: 2008 Control: Fanuc 18i-TB Technical data: 1. capacity Swing diameter over bed: 600 mm Max. Swing diameter: 380 mm Max. Turning length: 1240 mm 2nd spindle Main spindle power: 22 kW Main spindle torque: 1030 Nm Main spindle speed: 3200 rpm Main spindle chuck diameter: 254 mm Bar passage: 76 mm 3rd rapid traverse Cebu Hgrjwcn S Hjasgt Traverse paths X- / Z-axis: 20/-/20 m/min 4th turret Number of tool turret stations: 12 positions Driven tools Speed: 3000 rpm Drive power: 3.7 kW Tool system (type): BMT Direct pick-up: of which 6 driven stations C-axis: 0.001° 5. tailstock Quill diameter: 100 mm Quill stroke: 120 mm Cone: 5 MK 6. bar feeder Type: Samsys Multisam 2000 Bar length: max. 1550 mm 7. dimensions - Machine dimensions without accessories LxW: approx. 3300 x 1960 mm - Total machine length (machine + chip conveyor + bar feeder): approx. 7000 mm - Machine height: approx. 2150 mm - Weight: approx. 10500 kg

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Cgjbu Hgrjnxkcqeajt Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: excellent (used), Traub CNC Lathe Type TND 160 CNC Control TX 8 F Center height 180 mm Cgobu Hgowa N Rrsrajt Bed travel 360 mm Slide travel 180 mm Aperture 42 mm Chuck diameter 140 mm 8-station turret Tailstock

Condition: excellent (used), SPECIFICATIONS Swing over bed 528 Swing 370 Distance between centres 810 X Axis 290 Z Axis 650 Control Fanuc O-T Tool changer 1 2 Tail stock Yes Dodswbf Dkomblxx Isur Chip conveyor yes DIMENSIONS Length 3600 mm Width 1950 mm Height 1820 mm Cgebu Hgswbnqtsraet

Condition: good (used), Year of construction: 2012, 4000mm between centres, Cobu Hov Aaa Rograjgt swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 4 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1500 mm Measurements depth 3900 mm Measurements height 3200 mm Machine weight 7000 kg Control Unit Model SINUMERIK 840Dsl Brand SIEMENS Main Drive Spindle speed range 4500 rpm Spindle motor power 18kW at 100% duty cycle, 28kW at 40% duty cycle Tool taper DIN 55026 - A6 Number of axis 2 Movement X-Axis Movement 745mm X-Axis Rapid Traverse 60m/min Z-Axis Movement 300mm Z-Axis Rapid Traverse 30m/min Media Chip conveyor Yes Internal cooling Yes Additional Equipment Coolant tank capacity: 360 liters This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Cgjbu Hgowg Ibvorajt Application Types Turning

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Cebu Hgrjnr Nl Seasgt Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar Cebswbvhaeu Hgraogt stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: excellent (used), Year of construction: 1999, Hitachi Seiki HT 20R III Year of construction 1999 Seicos control system Csberzadnsu Hgraogt Tailstock Tool Eye Parts collection 42mm bar capacity Attached tools VDI 30

Condition: excellent (used), Four-jaw spiral chuck diameter 315 mm chuck height flute 125 mm short taper chuck size 6 taper diameter 106,39 mm pitch circle diameter for stud 133.4 mm 4 stud bolts M 12 Cjbu Hslguy Sograegt Accessories : 1 chuck key 1 set of hard drilling jaws 1 set of turning jaws hard Weight 103 kg Transport dimension : W800 x D.600 x H.550 mm

Condition: excellent (used), Friedrich Deckel FP 2 LB tool milling machine The accessories are not included in the scope of delivery, but can be purchased additionally. This universal milling machine FP 2 LB from the renowned German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable base body and is designed as a moving column machine, i.e. the machine does not lose accuracy if heavy parts (up to 1000 kg) are clamped. Cgjbu Hogyw S Tegraet Another special feature is the so-called inclined bed of 45 degrees. This makes it possible, after dismantling the universal table, to clamp and machine especially V-engine blocks with 90-degree cylinder angle (e.g. American V8) directly. The long traverse path 800mm is also an advantage in this case. Cover FP 2 LB universal swivel / tilt table (± 45° / ± 15°) Lid universal dividing head Vise 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm Transport possible on request. Please also note our other offers. Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Cjbu Hgrewg Ib Ajaogt Workpiece drm 280 mm Workpiece X 320 mm Tools Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning