Condition: used, Year of construction: 1986, turning diameter over bed 330 mm turning diameter over slide rest 210 mm turning length 635 mm turning speeds 58 - 2500 U/min centre height 165 mm spindle bore 38 mm total power requirement 2,5 KW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,6 x 0,9 x 1,65 m Center Lathe - Digital Display - 200mm 3-Jaw Chuck Cjhx Dzjwb Hz Dodrerb - Quick-Change Tool Post including 12 Tool Post Holders - Chuck Guard - Chip Tray - Live Center - Coolant System - Foot Brake - Emergency Stop Device - Machine Feet

Condition: repair required (used), Year of construction: 2012, Functionality: limited functionality, machine/vehicle number: 232-0001, spindle speed (max.): 15,000 rpm, spindle speed (min.): 1 rpm, bar passage: 10 mm, total width: 870 mm, total length: 1,670 mm, total height: 1,650 mm, turning diameter: 6 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 1,700 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, Equipment: cooling unit, NO BAR FEEDER! General Data: - Width: 870 mm Cshx Dzdsv Tfx Horerb - Depth: 1670 mm - Height: 1650 mm - Machine weight: 1700 kg Control: - Brand: FANUC - Model: 32i-MODEL B series Main drive - Number of spindles: 2 - Spindle speed range: 15,000 rpm - Number of axes: 5 Workpiece: - Workpiece diameter: 6 mm Additional Equipment: - Kraft and Bauer fire extinguishing system - High-pressure oil system This 5-axis TORNOS Micro 8 Swiss lathe was manufactured in 2012. It features a FANUC 32i-MODEL B series control, a spindle speed of 15,000 rpm, and a maximum diameter of 6 mm. If you are looking for a high-quality lathe, you should consider the TORNOS Micro 8, which we have for sale. Contact us for more information about this machine. Repair required: Encoder defective. Spindle stored unchecked (repair costs approximately €1,000). According to the customer! There may be deviations between the stated and actual values, which must be confirmed by the sales representative.

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Cehsnr Nl Sox Dzdrorb Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, Year of construction: 1995, Functionality: fully functional, Traub TNL 16 G, built in 1995, TX8F, machine number >200 (+ another machine available, Traub TNL16 G, built in 1994, TX8F) Y-axis, C-axis, rotary tool drive, 2 turrets, counter spindle, Iemca Mini Boss 325 CNC loading magazine Chip conveyor with coolant pump and tank Crehx Dzowgaltodrob Workpiece removal device (Sore) Parts conveyor belt Approx. 49,000 spindle hours Live operation, can be viewed in production until March 31, 2025 Approx. 2-3 weeks from order

Condition: excellent (used), Traub CNC Lathe Cehx Dzdewa N Rrjrsrb Type TND 160 CNC Control TX 8 F Center height 180 mm Bed travel 360 mm Slide travel 180 mm Aperture 42 mm Chuck diameter 140 mm 8-station turret Tailstock

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Top equipment - Version with long turning length - Driven tools - Bar loading magazine included - Including tailstock with quill Machine type: CNC lathe Crohx Dewcn S Hozdreb Manufacturer: Hwacheon Type: Hi-Tech 300 Year of manufacture: 2008 Control: Fanuc 18i-TB Technical data: 1. capacity Swing diameter over bed: 600 mm Max. Swing diameter: 380 mm Max. Turning length: 1240 mm 2nd spindle Main spindle power: 22 kW Main spindle torque: 1030 Nm Main spindle speed: 3200 rpm Main spindle chuck diameter: 254 mm Bar passage: 76 mm 3rd rapid traverse Traverse paths X- / Z-axis: 20/-/20 m/min 4th turret Number of tool turret stations: 12 positions Driven tools Speed: 3000 rpm Drive power: 3.7 kW Tool system (type): BMT Direct pick-up: of which 6 driven stations C-axis: 0.001° 5. tailstock Quill diameter: 100 mm Quill stroke: 120 mm Cone: 5 MK 6. bar feeder Type: Samsys Multisam 2000 Bar length: max. 1550 mm 7. dimensions - Machine dimensions without accessories LxW: approx. 3300 x 1960 mm - Total machine length (machine + chip conveyor + bar feeder): approx. 7000 mm - Machine height: approx. 2150 mm - Weight: approx. 10500 kg

Condition: excellent (used), SPECIFICATIONS Swing over bed 528 Swing 370 Distance between centres 810 X Axis 290 Z Axis 650 Cohx Dzewbnqtsdrjrb Control Fanuc O-T Tool changer 1 2 Tail stock Yes Dodswbf Dkomblxx Isur Chip conveyor yes DIMENSIONS Length 3600 mm Width 1950 mm Height 1820 mm

Condition: excellent (used), Four-jaw spiral chuck diameter 315 mm chuck height flute 125 mm short taper chuck size 6 taper diameter 106,39 mm pitch circle diameter for stud 133.4 mm 4 stud bolts M 12 Accessories : 1 chuck key 1 set of hard drilling jaws Cshx Dslguy Sozdrjrb 1 set of turning jaws hard Weight 103 kg Transport dimension : W800 x D.600 x H.550 mm

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1500 mm Crshx Dzdewg Ibvsrjb Measurements depth 3900 mm Measurements height 3200 mm Machine weight 7000 kg Control Unit Model SINUMERIK 840Dsl Brand SIEMENS Main Drive Spindle speed range 4500 rpm Spindle motor power 18kW at 100% duty cycle, 28kW at 40% duty cycle Tool taper DIN 55026 - A6 Number of axis 2 Movement X-Axis Movement 745mm X-Axis Rapid Traverse 60m/min Z-Axis Movement 300mm Z-Axis Rapid Traverse 30m/min Media Chip conveyor Yes Internal cooling Yes Additional Equipment Coolant tank capacity: 360 liters This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Application Types Turning

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ Crjhx Dzdswbvhaorjb - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: excellent (used), Year of construction: 1999, Hitachi Seiki HT 20R III Year of construction 1999 Crshx Derzadnezdrob Seicos control system Tailstock Tool Eye Parts collection 42mm bar capacity Attached tools VDI 30

Condition: used, Year of construction: 2001, Functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 500 mm, For sale is a cycle-controlled lathe of the Gildemeister brand and type NEF 520 K The machine is fully functional, the guides are somewhat worn but still functional Technical data: Gildemeister universal lathe NEF 520K Year of manufacture: 2001 Cshxotrmrxe Dzdrorb Control: Siemens Touch Panel Rotation Ø over bed: 500mm Rotation Ø over facing slide: 290mm Face travel: 260mm Center distance: 1000mm Drive power 12 KW 1st gear stage 8 - 750 rpm 2nd gear stage 32 - 3000 rpm Quill Ø: 80mm Quill holder: MK5 Quill stroke: 180mm Three-jaw manual chuck: Ø250mm Four-jaw manual chuck: Ø250mm Tool holder: Multifix size C Fixed vice with jaws and rollers, guide Ø10 - 115 On request, loading and transport can be organized for an additional charge All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: excellent (used), Friedrich Deckel FP 2 LB tool milling machine The accessories are not included in the scope of delivery, but can be purchased additionally. This universal milling machine FP 2 LB from the renowned German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable base body and is designed as a moving column machine, i.e. the machine does not lose accuracy if heavy parts (up to 1000 kg) are clamped. Another special feature is the so-called inclined bed of 45 degrees. This makes it possible, after dismantling the universal table, to clamp and machine especially V-engine blocks with 90-degree cylinder angle (e.g. American V8) directly. The long traverse path 800mm is also an advantage in this case. Cover FP 2 LB universal swivel / tilt table (± 45° / ± 15°) Lid universal dividing head Vise 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm Transport possible on request. Please also note our other offers. Crshx Dsgyw S Tjzdreb Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: new, The NOMURA 32J including 70bar high pressure system, short turning conversion kit, tool presetter, and long part removal, as well as other optional equipment. Cjhehmbi Iox Dzdrerb

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Crshx Dzowg Ib Asdrjb Number of axis 2 Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Workpiece X 320 mm Tools Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2018, Swing over carriage 355mm, Bar capacity 65mm, Maximum machining diameter 310mm, Maximum cutting length 521mm, Spindle speed 4,000 rpm, Cohxsrztr Rj Dzdrjrb Milling speed 5,000rpm, C axis 0.001 degrees, spindle power 22/18.5 Kw, 12 station turret, Fanuc 32i control, swarf conveyor, tool setter , 3 jaw chuck

Condition: good (used), turning diameter over bed 460 mm turning diameter over slide rest 300 mm turning length 800 mm Crohx Dzevpaaqsdreb centre height 230 mm spindle turning speed range 40 - 2000 U/min total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,8 x 1,5 m

Condition: new, The NOMURA 38KM including 70bar high pressure system, short turning conversion kit, tool presetter, and long part removal, as well as other optional equipment. Cehehrim Nox Dzdrsrb

Year of construction: 2022, Condition: ready for operation (used), Control Unit Brand FANUC Model FOi Plus Main Drive Spindle speed range 3500 Spindle motor power 15/18.5 kW (max) Number of axis 4 Movement X-Axis Movement 215 mm Y-Axis Movement 110 mm [±55] Z-Axis Movement 680 mm Workpiece Workpiece drm over bed 820 mm Workpiece drm 300 mm Additional Equipment 2x straight driven tool holders 2x angled driven tool holders 15-inch touch display Fanuc Smart Guide Part program storage: 2MB Control Unit Brand FANUC Model FOi Plus Main Drive Spindle speed range 3500 Spindle motor power 15/18.5 kW (max) Number of axis 4 Movement X-Axis Movement 215 mm Y-Axis Movement 110 mm [±55] Crehxovrlpce Dzdreb Z-Axis Movement 680 mm Workpiece Workpiece drm over bed 820 mm Workpiece drm 300 mm Additional Equipment 2x straight driven tool holders 2x angled driven tool holders 15-inch touch display Fanuc Smart Guide Part program storage: 2MB This 4-axis Hyundai Wia HD 2600SY was manufactured in 2022. It features a maximum turning diameter of 300 mm, turning length of 610 mm, and bar capacity of 81 mm. Equipped with a HW Fanuc FOi Plus control system, it offers spindle speeds up to 3,500 rpm and driven tools speed of 6,000 rpm. Consider the opportunity to buy this Hyundai Wia HD 2600SY horizontal turning machine. Contact us for further details regarding this machine. Application Types Turning

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, Crjhx Dzotmtktedrjb spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Year of construction: 1998, operating hours: 65,655 h, Condition: ready for operation (used), General Data Measurements width 4527 mm Measurements depth 1940 mm Measurements height 1730 mm Machine weight 5140 kg Control Unit Brand HEIDENHAIN Model CNC PILOT 3190/4290 Main Drive Spindle speed range 25-5000 Media Chip conveyor Yes General Data Measurements width 4527 mm Measurements depth 1940 mm Measurements height 1730 mm Machine weight 5140 kg Control Unit Brand HEIDENHAIN Model CNC PILOT 3190/4290 Main Drive Spindle speed range 25-5000 Media Chip conveyor Yes This Gildemeister CTX 400 S2 Lathe was manufactured in the year 1998 in Germany and has 65655 production hours. It is equipped with a HEIDENHAIN CNC PILOT 3190/4290 control unit. The machine has a spindle speed of 25-5000 rpm. Application Types Turning Cjhx Dzjwa Elxodrerb

Condition: good (used), Year of construction: 2018, Swing over carriage 390mm, Bar capacity 65mm, Maximum machining diameter 335mm, Maximum cutting length 455mm, Spindle speed 4,500 rpm, Milling speed 5,000rpm, Cehorbh Ubox Dzdrsrb Y axis -/+ 50mm, C axis 0.001 degrees, spindle power 15/11 Kw, 12 station turret, Fanuc 32i control, parts catcher, swarf conveyor, tool setter , 3 jaw chuck.

Condition: good (used), Year of construction: 2012, Bar capacity 51mm, maximum cutting diameter 255mm, Y axis travel +/- 40mm, Cehjvzry Tsx Dzdrjrb C axis to both spindles 0.001 degrees, 12 station upper & lower turrets, Spindle power 18kw, spindle speed 5,000rpm, milling power 18kw, milling speed 6,000rpm, Sub spindle travel 650mm, swarf conveyor, tool setter, parts catcher, collet chucks, tooling, magazine barfeed, & shaft unloader

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, Cehx Dovzrqfozdrjrb swing over carriage 400mm, 51mm bar capacity machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, swarf conveyor, tool setter, tailstock, and barfeed unit.

Condition: excellent (used), Year of construction: 2022, 300mm turning diameter, 510mm turning length, Y axis +/- 52mm, Cehovzrphsx Dzdrerb 600mm swing, 51mm bar capacity, 4500rpm, 24 station turret, 12.5kW spindle motor, milling 6000rpm, C axis 0.001 degrees, Fanuc I series control, tailstock, coolant, low volt light, parts conveyor, parts catcher.