Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Dcj Ia Usnxkcqop Theg Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: like new (used), Year of construction: 2018, DOOSAN PUMA GT2600 M 3-axis CNC lathe. Year of construction 2018 "CE". With live tools. Dco Ijwhbw Toa Up Thjg FANUC Numerical Control. Chip conveyor. LNS BARFEDEER QLS80 S2 loader Excellent conditions. Datasheet attached.

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Dcj Ia Ujuda Tnep Theg Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Operating instructions

Condition: good (used), Year of construction: 2012, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 4 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady. Dcs Ia Upev Aaa Rj Thjg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Bolt circle: Ø133 mm -Hole: short cone 6, cone Ø 103 - 105 mm -Dimensions total Ø 250 x 80 mm Dce Ia Up Tjv Sy Awoheg -Weight: 6.6 kg

Condition: used, turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 63 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56.0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm bed width 310 mm spindle taper DIN 55027 / 6 feeds - longitudinal 0.022 - 0.8 mm/U feeds - cross 0.011 - 0.4 mm/U thread M 0.3 - 10.0 mm bed width 305 mm voltage 380 V total power requirement 4.0 kW weight of the machine ca. 1600 kg range L-W-H 2320 x 1400 x 1600 mm Machine from a maintenance workshop Lathe with a precision-ground and induction-hardened bed. Ideal for use in workshops and training centers, for example. Equipment: - Robust centerline lathe - FORKARDT three-jaw chuck, Ø 200 mm - FORKARDT four-jaw chuck, Ø 200 mm - Collet chuck (without collets) Ds Iev Svafsa Up Thscg - 2 chuck keys - MULTIFIX tool holder, size B, with 3 inserts - 1 fixed steady rest - Movable tailstock - Chip guard, rear panel - 2 emergency stop buttons at the front - Adjustable bed stop - Coolant tray - Operating instructions (PDF)

Condition: good (used), Year of construction: 2021, Make: SPINNER, Type: TC600 65SMCY, Year of manufacture: 2021, Serial no. AT1207, max. swing Ø 600 mm, max. turning Ø 400 mm, max. turning length 650 mm, travel x/y/z = 275 / Y +50/-40/ 700 mm, max. rapid traverse x/y/z = 15/15/2 m/min, turning spindle 1: max. speed 4,000 rpm, spindle nose A8/DIN, chuck 250 mm, spindle power 21/27 kW, torque 201/258 Nm, turning spindle 2: max. speed 6,000 rpm, spindle nose Ø 110 mm, chuck 165 mm, spindle power 20/12 kW, torque 64/76 Nm, tailstock: taper mount MK4, quill Ø NC-Body, stroke 570 mm, tool turret (driven Tools) 16x VDI30/BMT45; 12x VDI40, counter spindle, Siemens control system, type 840DE, Spinner touch panel, Shopturn handheld unit, measuring probe for tool measurement, Spinner workpiece automation, type Robobox, consisting of a workpiece pallet, 5 drawers, dimensions WxHxD = 800x600x200 mm each, Fanuc loading/unloading robot, type M-10ID12, load capacity 12 kg, reach 1,420 mm Ds Ia Up Tev Txq Nehocg +++ Attention: Machine is part of an online auction! +++

Condition: excellent (used), Year of construction: 2018, EMCOTURN E 65 SMY BigBore Siemens 3-axis CNC lathe with counter spindle and driven tools De Ia Uewf Ni Sep Thjcg including Y-axis AND C-axes Year of manufacture 2018 30,000 operating hours Machine was used for plastics machining. Machine is in operation and can be tested. Chip conveyor has been recently overhauled. Highly efficient universal lathe for complete machining with stable and precise linear guides. State-of-the-art SINUMERIK 828D control technology with ShopTurn dialog programming. Main spindle: • A2-6" connection (DIN 55026) • Max. bar capacity ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Counter spindle: • A2-6" connection (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: 12-station IDI 30 radial tool turret with directional logic for up to 12 driven tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel range: +/-40 mm - Hollow clamping cylinder including draw tube - C-axis for main/counter spindle - Mechanical spindle brakes - Sinumerik 828D control system with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive/Ethernet - 10.4" TFT color monitor - 3D simulation, and much more - Machine light - Coolant system with 3.5 bar coolant pump - Hydraulic unit - Chip conveyor interface - Documentation SuperBigBore 95: Allows bar passage up to 95 mm instead of the standard 65 mm (main spindle). Drawbar connection: M102 x 2 Spindle connection (DIN 55026): KK8 Max. speed 3,500 rpm Max. torque 380 Nm Max. power 22 kW Max. chuck size 250 mm (315 mm) Differential pressure clamping for main and counter spindle: -Sensitive adjustment of the spindle clamping pressure -Counterpressure principle -Manually adjustable hydraulic clamping pressure analog/digital converter -Display on the machine control -Adjustment range 6-60 bar -The clamping pressure on the workpiece depends on the clamping cylinder and the clamping device Electronic handwheel Parts collecting device E65 Bar loader: EMCO SL1200 FOR E45/E65/MT45/MT65/ HT45/HT65-PM INCL. EMCO INTERFACE short bar loading magazine for the automatic feeding of bar stock with diameters from 8 to 95 mm and lengths up to 1200 mm. The loading magazine is particularly characterized by its compact footprint and ease of use. EMCO Interface included! Tool measurement Multiflow cleaning gun Chip conveyor 1200 mm: Hinged belt conveyor with ejection height of 1200 mm Suitable for: Long steel chips, chip balls, and wool shavings Dry and wet machining 14 bar high-pressure coolant system Coolant can be switched to air through the tool turret: - Programmable via M command

Condition: reconditioned (used), Year of construction: 2015, CNC lathe HURCO TMX 10 MYSi With HURCO MAX control Year of construction: 2015 Turning diameter over bed: 560 mm Travel in X: 220 mm Travel in Z: 670 mm Travel distance W axis: 740 mm Travel distance Y axis: + /- 55 mm Spindle bore: 77 mm Speed range: 20 - 3500 rpm With the following accessories: Sliding guard with interior lighting 12-slot turret with 12 driven stations (VDI 40) Various VDI 40 tool holders Various driven tools VDI 40 Tool measuring device Electronic handwheel Parts pick-up device Y axis + / - 55 mm Counter spindle 6000 rpm with jaw chuck Kitagawa 0 200 mm 3 jaw chucks Hydraulic 0 250 mm with foot switch Chip conveyor Oil mist extraction Status light Dco Ia Upotppkbj Thsg Coolant device Operating instructions

Year of construction: 1999, operating hours: 55,234 h, Condition: ready for operation (used), General Data Measurements width 2100 mm Measurements depth 2660 mm Measurements height 1780 mm Machine weight 6000 kg Control Unit Model U - 100L Main Drive Number of spindles 2 Spindle speed range 6000 rpm Spindle motor power 7.5 kW Spindle bore 53 mm Movement X-Axis Movement 195 Z-Axis Movement 700 Dcs Ia Up Towg Ib Nshsg Turret Number of turrets 2 Additional Equipment Number of tools: 12 This 3-axis Okuma LT 10-M horizontal turning machine was manufactured in 1999. It features a maximum turning length of 130 mm and a turning diameter of 210 mm. With a spindle speed of 6000 rpm and motor power of 7.5 kW, it's designed for precision. Ideal for those looking to buy this Okuma LT 10-M horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1986, turning diameter over bed 330 mm turning diameter over slide rest 210 mm turning length 635 mm turning speeds 58 - 2500 U/min centre height 165 mm spindle bore 38 mm total power requirement 2,5 KW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,6 x 0,9 x 1,65 m Center Lathe - Digital Display - 200mm 3-Jaw Chuck - Quick-Change Tool Post including 12 Tool Post Holders - Chuck Guard - Chip Tray - Live Center - Coolant System - Foot Brake - Emergency Stop Device - Machine Feet Dce Ia Up Tjwb Hz Djheg

Condition: excellent (used), Traub CNC Lathe Type TND 160 CNC Control TX 8 F Center height 180 mm Bed travel 360 mm Slide travel 180 mm Aperture 42 mm Chuck diameter 140 mm 8-station turret Dce Ia Ujwa N Rrsp Thjg Tailstock

Condition: repair required (used), Year of construction: 2012, Functionality: limited functionality, machine/vehicle number: 232-0001, spindle speed (max.): 15,000 rpm, spindle speed (min.): 1 rpm, bar passage: 10 mm, total width: 870 mm, total length: 1,670 mm, total height: 1,650 mm, turning diameter: 6 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 1,700 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, Equipment: cooling unit, NO BAR FEEDER! General Data: - Width: 870 mm - Depth: 1670 mm - Height: 1650 mm - Machine weight: 1700 kg Do Ia Upev Tfx He Thecg Control: - Brand: FANUC - Model: 32i-MODEL B series Main drive - Number of spindles: 2 - Spindle speed range: 15,000 rpm - Number of axes: 5 Workpiece: - Workpiece diameter: 6 mm Additional Equipment: - Kraft and Bauer fire extinguishing system - High-pressure oil system This 5-axis TORNOS Micro 8 Swiss lathe was manufactured in 2012. It features a FANUC 32i-MODEL B series control, a spindle speed of 15,000 rpm, and a maximum diameter of 6 mm. If you are looking for a high-quality lathe, you should consider the TORNOS Micro 8, which we have for sale. Contact us for more information about this machine. Repair required: Encoder defective. Spindle stored unchecked (repair costs approximately €1,000). According to the customer! There may be deviations between the stated and actual values, which must be confirmed by the sales representative.

Condition: excellent (used), Year of construction: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Operating hours: 14,100 hours Including various accessories Dcs Iewf I Rzsa Up Thog

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" De Ia Ujuzyw Djp Thocg With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, Year of construction: 1995, Functionality: fully functional, Traub TNL 16 G, built in 1995, TX8F, machine number >200 (+ another machine available, Traub TNL16 G, built in 1994, TX8F) Y-axis, C-axis, rotary tool drive, 2 turrets, counter spindle, Iemca Mini Boss 325 CNC loading magazine Chip conveyor with coolant pump and tank Workpiece removal device (Sore) De Ia Upowgalts Thocg Parts conveyor belt Approx. 49,000 spindle hours Live operation, can be viewed in production until March 31, 2025 Approx. 2-3 weeks from order

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Top equipment - Version with long turning length - Driven tools - Bar loading magazine included - Including tailstock with quill Machine type: CNC lathe Manufacturer: Hwacheon Type: Hi-Tech 300 Year of manufacture: 2008 Control: Fanuc 18i-TB Technical data: 1. capacity Swing diameter over bed: 600 mm Max. Swing diameter: 380 mm Max. Turning length: 1240 mm 2nd spindle Main spindle power: 22 kW Main spindle torque: 1030 Nm Main spindle speed: 3200 rpm Main spindle chuck diameter: 254 mm Bar passage: 76 mm 3rd rapid traverse Traverse paths X- / Z-axis: 20/-/20 m/min 4th turret Number of tool turret stations: 12 positions Driven tools Speed: 3000 rpm Drive power: 3.7 kW Tool system (type): BMT Direct pick-up: of which 6 driven stations C-axis: 0.001° Ds Ia Up Tewcn S Hehecg 5. tailstock Quill diameter: 100 mm Quill stroke: 120 mm Cone: 5 MK 6. bar feeder Type: Samsys Multisam 2000 Bar length: max. 1550 mm 7. dimensions - Machine dimensions without accessories LxW: approx. 3300 x 1960 mm - Total machine length (machine + chip conveyor + bar feeder): approx. 7000 mm - Machine height: approx. 2150 mm - Weight: approx. 10500 kg

Condition: excellent (used), Year of construction: 1999, Hitachi Seiki HT 20R III Year of construction 1999 Seicos control system Dj Ia Uporzadno Thecg Tailstock Tool Eye Parts collection 42mm bar capacity Attached tools VDI 30

Condition: excellent (used), SPECIFICATIONS Swing over bed 528 Swing 370 Distance between centres 810 X Axis 290 Z Axis 650 Control Fanuc O-T Tool changer 1 2 Tail stock Yes Dodswbf Dkomblxx Isur Chip conveyor yes DIMENSIONS Do Iaswbnqte Up Thecg Length 3600 mm Width 1950 mm Height 1820 mm

Condition: excellent (used), Four-jaw spiral chuck diameter 315 mm chuck height flute 125 mm short taper chuck size 6 Ds Ia Upjlguy So Thocg taper diameter 106,39 mm pitch circle diameter for stud 133.4 mm 4 stud bolts M 12 Accessories : 1 chuck key 1 set of hard drilling jaws 1 set of turning jaws hard Weight 103 kg Transport dimension : W800 x D.600 x H.550 mm

Condition: reconditioned (used), Year of construction: 2023, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2003 Spindle bore: 70 mm Center distance: 1500 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting Dj Iaouq Ebrs Up Thscg MULTIFIX tool holder with 10 pcs. inserts 3 jaw chucks FORKARDT 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip conveyor Coolant device Operating instructions

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are De Ia Uswbvhajp Thecg located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1500 mm Measurements depth 3900 mm Measurements height 3200 mm Machine weight 7000 kg Control Unit Model SINUMERIK 840Dsl Brand SIEMENS Main Drive Spindle speed range 4500 rpm Spindle motor power 18kW at 100% duty cycle, 28kW at 40% duty cycle Tool taper DIN 55026 - A6 Number of axis 2 Movement Dce Iaewg Ibvj Up Thsg X-Axis Movement 745mm X-Axis Rapid Traverse 60m/min Z-Axis Movement 300mm Z-Axis Rapid Traverse 30m/min Media Chip conveyor Yes Internal cooling Yes Additional Equipment Coolant tank capacity: 360 liters This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Application Types Turning

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Circulation O over bed: 435 mm Dco Isvkd Inja Up Thsg O rotation over cross slide: 200 mm Center height: 210 mm Speed range: 1 - 3500 rpm infinitely variable With the following accessories: Sliding guard with interior lighting Multifix tool holder with 8 pcs. inserts 8-position SAUTER turret with AGW and tool drive C axis via main drive 3 jaw chucks Schunk ROTA plus 0 250 mm 5 sets of soft top jaws, 1 set of hard top jaws Tailstock with extendable drilling quill Coolant device reinforced 5.5 bar Coolant spray gun Chip collection tray 5 pcs. Height-adjustable machine shoes Operating instructions

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Dce Ia Up Tswg Ib Ashsg Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Workpiece X 320 mm Tools Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning