Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Fsljwd E N Sen Nrhuopg Year of manufacture 2000, Siemens 810 D control system, X/Z travel 210/610 mm, 12-station VDI 30 turret, all stations driven, driven tools up to 4,000 rpm, collet chuck, tailstock, C-axis 0.001°, spindle speed up to 6,300 rpm, coolant system, chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Year of construction: 2022, Condition: like new (used), machine/vehicle number: 3123432 & 3123758, For sale is a Haas ST20 Y and a Haas ST30 Y, each with an automatic Haas bar feeder. Both machines have a counter spindle and an automatic chip conveyor. Both machines have a 24-tool turret. Live tools. Fjln Njwg Adferhuspg A large collection of tools, measuring instruments, etc. is included. The total new value of the tools is approximately €50,000. These machines were newly manufactured for a customer at Haas at the end of 2022 and delivered from the USA in 2023. Unfortunately, the customer suddenly backed out, and now both machines with the bar feeders have only been set up and tested by the technicians. The test run was flawless. All invoices for the tools, etc., are available. Viewings possible at any time. Located near Stuttgart Airport. Please contact us if you are interested.

Condition: ready for operation (used), chuck outer diameter: 3,200 mm, total height: 7,155 mm, controller model: Siemens 840D, net weight: 65,000 kg, Type: SKD 32B Siemens 840D CNC-besturing 2017 Tafeldiameter: 3200 mm Maximale zwenking: 3500 mm Maximale belasting op tafel: 50 ton Hydrostatische tafel!! Vermogen op tafel: 120 kW Torsiekracht: 132 Kn 2 variabele snelheden versnellingsbak: ,8 80 rpm Verticale verplaatsing van de dwarsbalk: 2100 mm Maximale werkstukhoogte: 2550 mm 2 gereedschapskoppen op dwarsbalk CNC gestuurd - Horizontale beweging van gereedschapskop nr. 1: 1400mm - verticale beweging van gereedschapskop nr. 1: 1500mm - Horizontale beweging van gereedschapskop nr. 2: 1980mm - verticale beweging van gereedschapskop nr. 2: 1350 mm - draaihoek van gereedschapskop: -/+ 30° Max turningdia -- passage: 3500 mm Fpoln Nov Rwh Isrhujg Power on the spindle: 120 kW Number of speeds: 1 > rpm / > 80 rpm Power needed: 195 kVa Long: 10045 mm Wide: 8120 mm

Condition: good (used), Year of construction: 1979, Center height: 120 mm Center width: 450 mm spindle opening/boring: 23 mm board width: 100 mm Speeds: (12) 180 - 2240 min-1 travel top slide: 140 mm Feln Neip Nczerhuepg tailstock mount: MK 2 quill stroke: 80 mm motor power: 2,5 kW connection: 400 V dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Punching device quick change holder system Multifix, size Aa Machine light Coolant device

Year of construction: 2013, operating hours: 69,000 h, Condition: ready for operation (used), General Data Measurements width 1890 mm Measurements depth 2140 mm Measurements height 2050 mm Machine weight 5600 kg Control Unit Brand FANUC Model Series 0i-TD Main Drive Number of spindles 2 Spindle speed range 4000 Spindle motor power 11/7.5 kW Movement X-Axis Movement 150 mm X-Axis Rapid Traverse 24 m/min Fsln Nowgqazerhuopg Z-Axis Movement 160 mm Z-Axis Rapid Traverse 24 m/min Turret Number of turrets 2 Media Power consumption 43 kVA Additional Equipment 20 pcs tool holders This Takamaz XW-130 Lathe was manufactured in Japan in 2013 and has been operative for 69000 hours, from which 40000 are cutting hours. This machine incorporates 2 turrets each with 8 positions. 20 pcs tool holders are included. Application Types Turning

Condition: new, Support roller for steady rests ,NUTR 50110 A (28104) Fpjlnsip Da Ds Nrhuog Make INA inner diameter 50 mm Outside diameter 110 mm Width. 32 mm 3 pieces available unused goods

Condition: good (used), Year of construction: 2004, Emco ET 420 / double spindle lathe, Foln Nrhsr Izbyjujpg Year of manufacture 2004, Siemens control, max. bar capacity 26 mm, max. part length 600 mm, 2 main spindles, 2 counter spindles, double bar loading magazine, main spindle up to 5,000 rpm, C axis 0.01° , Revolver 2 x 12-fold VDI 16, 4 driven tool stations / turret, chip conveyor, coolant device, parts catcher long parts ( self-made )

Condition: good (used), Year of construction: 2006, CNC Lathe Make: DOOSAN Type: PUMA TT 1800 SY Year of Manufacture: 2006 with: FANUC 18i-TB Control Synchronous Spindle Driven Tools 2x C-Axis Y-Axis 2x Turrets Parts Conveyor Chip Conveyor Fjln Nrhspn Sp Deuepg FMB TURBO 8-80 Bar Loader

Condition: ready for operation (used), controller model: Fanuc 310i, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, net weight: 10,000 kg, swing diameter over cross slide: 950 mm, Spindle 1: 20 kW - 5000 rpm - spindlebore: 70 mm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis X1 movement: 165 mm Y1 movement: +50/-30 mm Z1 movement: 678 mm Spindle 2: 17 kW - 5000 rpm - spindlbore: 42 mm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven A-axis X2 movement: 165 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Chuck: Ø 175 mm Fjln Njv Rwltsrhuopg Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Condition: used, Year of construction: 1991, Technical data: Tip height: 215 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (24) 16 - 1400 min-1 Foln Nreu Tfmfjhujpg Motor power 2-stage: 3.0 / 6.0 kW Tailstock holder: MK 4 Quill stroke: 130 mm Dimensions (WxDxH), approx.: 2170 x 1180 x 1600 mm Equipment: - 3-axis digital readout, brand - 3-jaw lathe chuck, brand: Forkardt ø 200 - Emergency stop button - Multifix quick-change holder system - Machine light - Rotating center point - Coolant device

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 1460 Measurements depth 2220 Measurements height 1700 Machine weight 3100 Main Drive Spindle speed range 6000 Fjln Nrswgp Udohujpg Spindle motor power 7.5/5.5 kW Number of axis 7 Movement X-Axis Movement 140 mm Y-Axis Movement 70 (+/-35) mm Z-Axis Movement 235 mm Tools Number of station 8 Media Chip conveyor Yes Additional Equipment Bar Loader: IEMCA BOSS 545 E This 7-axis Miyano BNA-42DHY turn-mill centre was manufactured in 2011. It features a main spindle with a maximum bar diameter of 42 mm and speeds up to 6000 rpm, complemented by a counter-spindle that handles up to 34 mm and 5000 rpm. Equipped with two turrets, upper with 8 positions and lower with 6, it offers versatile machining options. Includes a chips conveyor and an IEMCA BOSS 545 E bar loader. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2019, operating hours: 4,050 h, Functionality: fully functional, machine/vehicle number: STASV1220319EGCAH, turning diameter over cross slide: 508 mm, turning length: 527 mm, turning diameter: 336 mm, travel distance X-axis: 290 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,700 mm, total length: 4,500 mm, total width: 2,700 mm, tool mount: 40 mm, overall weight: 8,500 kg, bar passage: 78 mm, distance between centers: 824 mm, travel distance W-axis: 640 mm, operating hours of spindle: 1,040 h, Equipment: documentation/manual, Equipment Highlights: - Year of Manufacture: 2019 - Control: Integrated digital technical documentation Fpslnjwdylho Nrhusg - Counter spindle included - 12 tool positions, including driven tools - Incl. tool package - Turret: BMT65 / VDI40 (DIN 1809) - Fully integrated Y-axis - Recirculating roller guides on the X, Y, Z, and W axes - Transport on a standard truck possible Technical Specifications: - Spindle (Main Spindle): - Max. speed: 3,500 rpm - Max. bar capacity: 78 mm Counter spindle: - Max. speed: 6,000 rpm - Max. bar capacity: 46 mm Turret: - Type: BMT65 / VDI40 - Number of tool positions: 12 - Max. speed of driven tools: 4,000 rpm - Max. boring bar diameter: 40 mm mm - Shank cross-section: 25 mm - Indexing time: 0.15 s Machining range: Travel paths: - X-axis: 290 mm - Y-axis: ±55 mm - Z-axis: 560 mm - W-axis: 640 mm - Max. turning length: 527 mm - Center distance: 824.5 mm - Swing diameter over slide: 508 mm - Chuck diameter: 203 mm Max. turning diameter: - VDI: 336 mm - BMT65: 315 mm - with Y-axis: 224 mm Accuracy: - Positioning accuracy (VDI/DGQ 3441): 0.010 mm (new machine) - Repeatability: 0.005 mm (new machine) Feed rates: - X-axis: 24 m/min - Y-axis: 12 m/min - Z-axis: 30 m/min - W-axis: 30 m/min Installation dimensions & weight: - Dimensions (L x W x H): 4,500 x 2,700 x 2,700 mm - Weight: approx. 8,500 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder Fjln Nsv Tlkporhuopg -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg

Condition: excellent (used), Year of construction: 2014, bar diameter: 42 mm, Manufacturer: MIYANO Type: BNA-42DHY2 Year of manufacture: 2014 Folswcqchon Nrhujpg with: FANUC Series 0i-TD control Back machining Turret Synchronous spindle Driven tools C-axis Chip conveyor Parts conveyor Fire extinguishing system FMB Turbo 5-55 bar feeder

Condition: ready for operation (used), Schiess 80 DF Type: 80 DF 700/900-550/280 Originele CNC-machine van Schiess (geen ombouw van conventioneel naar CNC) Volledig hydrostatische machine Gelakte kolom Siemens-motor Uitrusting met een bedieningslift om de bovenkant van het werkstuk te kunnen zien Machine met zeer hoge tolerantie Tafeldiameter: 7000 mm Maximale diameter van het werkstuk: 9000 mm Maximale belasting: 315 ton Snelheid: 0,25 25 tpm Maximaal rotatiekoppel: 63.000 kgm Maximale snijkracht met ram uitgeschoven tot 900 mm: 12.500 kg Gereedschapskop kan -40° tot +40° kantelen Vermogen: 125 kW gewicht van de tafel: 71 ton Ramsectie: 380 x 380 mm Horizontale verplaatsing van de ram vanaf het midden van de tafel: 5640 mm Verticale slak van de ram: 2800 mm Maximale hoogte onder dwarsbalk: 5547 mm Horizontale verplaatsing van de dwarsbalk: 4700 mm Uitgerust met automatische gereedschapswisselaar met 3 standen Totaalgewicht van de machine: 260 ton! Unieke unieke er zijn 3 mogelijke configuraties van de hoofdkolom: 1 - voor maximale swing 9000 mm (zoals het momenteel is ingesteld) 2 - voor max. zwenkbereik 10.500 mm 3 - voor max swing 13 100 mm Dit kan worden bereikt door de hoofdkolom opnieuw op het fundament te positioneren. Foljv Rwdpon Nrhuepg

Condition: ready for operation (used), turning diameter over cross slide: 250 mm, spindle bore: 60 mm, turning diameter over bed slide: 600 mm, Center Lathe Manufacturer: Meuser Type: M 3 A 300 x 1000 Bebmmveu Rl Hisyhwolf Turning diameter over cross slide: 250 mm Spindle bore: 60 mm Turning diameter over bed slide: 300 / 660 mm Center height: 330 mm Center width: 1,000 mm Tailstock MK 5 Fpoln Nrhswag Dieusg Threading: Metric trapezoidal thread Inch Whitworth thread / pipe thread Equipped: 315 mm lathe chuck, 3 jaws 1 steady rest Tool holder with tools

Condition: good (used), Year of construction: 2003, Functionality: fully functional, GENERAL Project No.: 905722 Quantity: 1 pc. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Fjlov Tbf Aon Nrhujpg Year build: 2003 Condition: Used Machine DESCRIPTION TURNING Max. turning diameter 356 mm Max. turning length 655 mm Max. Swing diameter over bed 520 mm Max. Swing diameter over cross slide 250 mm Max. Swing diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at 10-40/100% duty ratio 18 kW Spindle bore main spindle 75 mm Spindle flange size main spindle A2-8 Axis at main spindle unit C Hollow clamping cylinder at main spindle Tailstock NC-controlled 1 pc. Upper turret No. of stations/driven 12/12 Speed tool drive 6000 1/min Axis in turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse in X/Y/Z 18/-/24 m/min FURTHER EQUIPMENT Tool life time monitoring Fully enclosed work area Light in working area Preparation for central oil-/emulsion mist extraction unit Scraper-type chip conveyor Machine operates/operated with oil Flush gun Coolant unit High pressure pump 40 bar Automatic CO2-fire extinguishing system Finish-part pick-up unit Bar loader/magazine FMB turbo 8-80 Warning lamp ACCESSORIES 1 pc. Collet chuck mm 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools GENERAL TECHNICAL DATA Mains fuse 142 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 3495 x 2050 x 2222 mm Machine weight approx. 5800 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: excellent (used), Year of construction: 2007, - Control unit FAGOR 8055 - max. turning Ø: 550 mm - max. turning length: 2000 mm - Tool turret with 8 stations Fpjln Nrhjtt Ddrouog - travel: X= 300, Z= 2150 mm - Quill travel: 150 mm - Dimensions LxWxH: 4200 x 2100 x 2050 mm - Weight: 4,900 kg Accessories: - 2 steady rests - various tools

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw Fpjlnsv Tli Se Nrhuog -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

Condition: good (used), Year of construction: 2008, CNC Swiss-Type Automatic Lathe Make: STAR Type: SR-20R II Year of Manufacture: 2008 with: FANUC 18i control Back machining Synchronous spindle Driven tools C-axis Foln Nrswcl Tzehuopg Parts conveyor Fire extinguishing system Chip conveyor Oil mist extraction FMB TURBO 3-36 bar feeder

Condition: good (used), Year of construction: 2010, Functionality: fully functional, GENERAL Project No: 905696 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2010 Condition: Used Machine Programme run approx. [h]: 49.479 DESCRIPTION TURNING Max. turning diameter 210 mm Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication Fpsln Njvfmdusrhueg GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: good (used), Year of construction: 2007, CNC Swiss-Type Lathe Make: STAR Type: SR-20R II Year of Manufacture: 2007 with: FANUC 18i Control Back-End Machining Synchronous Spindle Driven Tools C-Axis Parts Conveyor Fire Extinguishing System Chip Conveyor Fpoljwcl Thon Nrhujg Oil Mist Extraction FMB TURBO 3-36 Bar Loading Magazine

Condition: good (used), Year of construction: 2018, operating hours: 28,500 h, Functionality: fully functional, GENERAL Project No: 905623 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Siemens 840 D solutionline Year of Manufacture: 2018 Condition: Used Machine Programme run approx. [h]: 28.500 DESCRIPTION TURNING Max. turning diameter 210 mm Max. turning length 100 mm Max. Swing diameter over bed cover 210 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 200 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Fjlnjry Uhws Nrhujpg Tool reception in turret VDI 40 FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit with paperband filter Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Mains fuse 80 A Total power requirement 36 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Year of construction: 2001, Condition: reconditioned (used), GENERAL Project No: 905398 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2001/2022 Condition: Retrofitted Machine Shifts approx.: 2-3 shift Fpjln Nreiix N Ushujg DESCRIPTION TURNING Max. Swing diameter over bed cover 210 mm Max. Clamping chuck diameter 170 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 134/85 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 Speed tool drive 6000 1/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Total power requirement 28 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 5500 kg REMARKS We offer a professionally retrofitted machine. All crucial components, like guideways with roller carriages, ball screws, main spindle, bearings in turret and tool drive etc. have been replaced. Please also see attached document. . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, GENERAL Project No.: 905732 Quantity: 1 pc. Manufacturer: TRAUB Type: TNL 18 Control: Traub TX 8i-s Year build: 2011 Condition: Used Machine Spindle on approx. (hrs): 28381 Programme run approx. (hrs): 36646 DESCRIPTION TURNING Max. turning diameter 20 mm Max. speed main spindle 10000 1/min Max. power main spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque main spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore main spindle 20 mm Axis at main spindle unit Z/C Headstock stroke main spindle 205 mm Max. rapid traverse in X/Y/Z main spindle unit -/-/40 m/min Hollow clamping cylinder at main spindle Max. speed opposed spindle 10000 1/min Max. power opposed spindle at 10-40/100% duty ratio 3,7/2,2 kW Max. torque opposed spindle at 10-40/100% duty ratio 23,5/14 Nm Spindle bore opposed spindle 20 mm Axis at opposed spindle unit X/Z/C Travel in X/Y/Z opposed spindle unit 100/-/262 mm Max. rapid traverse in X/Y/Z opposed spindle unit 20/-/40 m/min Upper turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-40 bis +25/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min Lower turret No. of stations/driven 8/8 Tool reception in turret 45 mm Speed tool drive 12000 1/min Axis in turret X/Y/Z/H Travel in X/Y/Z 120/-20 bis +40/250 mm Max. rapid traverse in X/Y/Z 20/20/40 m/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Slat band chain chip conveyor Machine operates/operated with oil Foln Nrhev Tbd Esuepg Coolant unit with paperband filter High pressure pump 50 bar Automatic CO2-fire extinguishing system Part outfeed conveyor Finish-part pick-up unit Bar loader/magazine make FMB minimag 20 Max. bar length 3200 mm ACCESSORIES 2 pc. Collet chuck 1 Set Tool holder for turning tools 1 Set Tool holder for driven tools 1 Set Spare Parts for the machine (i.e. Mitsubishi Power modules, etc.) 1 Set Changing tubes GENERAL TECHNICAL DATA Total power requirement 24 kVA Machine dimensions (LxWxH) approx. 3060 x 1460 x 2250 mm Machine weight approx. 4000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.