Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Main Drive Number of axis 3 Additional Equipment Fpelnswhgr Ne Ur Imjg Scope of delivery: Machine, clamping system, chip conveyor This 3-axis GORBREX TKV 525 CNC was manufactured in 2021, offering precise vertical turning capabilities. Ideal for detailed machining tasks, this machine maintains robust construction and modern design. Consider the opportunity to buy this GORBREX TKV 525 CNC vertical turning machine. Contact us for more information. Application Types Turning

Condition: new, turning diameter 330 mm turning length 830 mm swing diameter over bed slide 196 mm Swingdiameter in the bed bridge 170 centre height 165 mm centre distance 830 mm Turning length in the bed bridge 430 reus 16 (70-2000) U/min tail stock MK 3 quill stroke 110 mm diameter of quill 32 mm spindle taper DIN ISO 702-2 Nr. 4 spindle bore 38 mm spindle cone MK 5 feed längs 32 / 0,052 1,392 m/min feed plan 3,2 / 0,014 0,38 m/min weight of the machine ca. 0,52 t dimensions of the machine ca. 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 Fpjlnok Egrwo Ur Imsg - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Heidenhain control system Main and counter spindle Main spindle bar capacity: 90 mm Capto C6 milling spindle 36 tool positions Lower turret, 12x VDI 40 Fpeln Ujwax A Rer Imog 80 bar internal coolant supply Many accessories 1.5 m Breuning bar loader

Condition: good (used), Year of construction: 2000, Functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Folnsv T Un Ds Ur Imopg Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, YANG ML15A CNC Lathe Year 1999 Conveyor Tailstock Fjln Ur Iowcqwfsmepg Visible under power, video available In good condition

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Chuck: Kitagawa BB208 (210mm) bar passage: 65 mm Fpeln Ur Iok D Ez Iomog secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)

Year of construction: 2018, Condition: ready for operation (used), General Data Measurements width 1903 Measurements depth 3600 Measurements height 2163 Machine weight 6500 Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 4000 Spindle motor power 33 kw Number of axis 3 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±52.5 mm Y-Axis Rapid Traverse 30 m/min Fpeljwbw Aljn Ur Imjg Z-Axis Movement 830 mm Z-Axis Rapid Traverse 10 m/min Additional Equipment Mekiload Gantry Loader Renishaw Equator Renishaw Equator General Data Measurements width 1903 Measurements depth 3600 Measurements height 2163 Machine weight 6500 Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 4000 Spindle motor power 33 kw Number of axis 3 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±52.5 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 830 mm Z-Axis Rapid Traverse 10 m/min Additional Equipment Mekiload Gantry Loader Renishaw Equator Renishaw Equator This 5-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Heavy lathe, lathe, lathe, lead and pull screw lathe, lead and pull screw lathe Fjlorl T Uwen Ur Imopg -Manufacturer: VDF Heidenreich Harbeck, lead and pull spindle lathe type V3 -Turning length: 1600 mm -Swivel Ø over bed: 530 mm -Turning Ø over support: 330 mm -Spindle bore: Ø 62 mm -Spindle speeds: 14 - 710 rpm see photo -Three-jaw chuck: Röhm Ø 315 mm -Tailstock mount: MK5 -Accessories: tool holder/tools see photos -Dimensions: 1100/3460/H1250 mm -Weight: 2650kg

Condition: good (used), Year of construction: 1984, Thomann EED 20 Automatic Bar Lathe For square and flat bars Capacity range: 6-20 mm Flat steel: 10/3-30/10 mm Turning length: 25-900 mm Technical specifications Fpoljwbglien Ur Imog Length: 1200 mm Width: 660 mm Height (without base): 350 mm Height (with base): 1150 mm Weight (without base): 120 kg Voltage: 380 V Motor power: 0.75 kW Rotation speed: 7 rpm

Condition: good (used), Year of construction: 1996, Functionality: fully functional, CNC Lathe Manufacturer: HITACHI SEIKI Type: TF 20 Year 1996 Control: FANUC 21TB Chuck diameter: 210 mm Forkardt. Maximum turning diameter: 200 mm Forkardt Turning length: 250 mm Spindle speeds: 52-4500 rpm Spindle bore: 52 mm Tool turret with 8 positions Rapid traverse X and Z: 25 m/min Machine without tailstock. Machine can be demonstrated under power. Foln Ujv T Uf Asr Imspg In good condition, complete machine documentation is available. For further information, see data sheets.

Condition: good (used), Weiler Condor VS 2 center lathe and feed spindle lathe Technical data: Center height 160 mm Center width 800 mm Spindle bore 40 mm Bed width 240 mm Fpelnsu E H Iwj Ur Imog Speeds 12 - 2800 min-1 Drive power 3 kW Tailstock holder MK 3 Quill stroke 110 mm Feed rates 0.037 - 1.253 mm/rev Weight, approx. 800 kg Dimensions (WxDxH), approx. 1930 x 880 x 1470 mm Equipment: 3-jaw lathe chuck Quick-change holder system Multifix size A incl. 1 change holder Electrically locked chuck guard Brake motor retrofitted Bed stop Emergency stop button Coolant device Machine light Chip back panel ELESTA 3-axis digital display Moving tip The machine has been technically inspected and is in very good condition. Backlash face spindle 0.2mm Top slide backlash 0.15mm Inspection under power possible at any time. Price net free loading ex warehouse

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws Fsln Urowb Supo Imspg >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Year of construction: 2024, Condition: ready for operation (used), Control Unit Brand FANUC Fsln Urowbwy Ds Imjpg Additional Equipment Chip Conveyor: Hinged belt, longitudinal arrangement Discharge Height: 750 mm Chuck System: 3-Jaw SMW Autoblok Ø 210 mm (8.0") Actuation: Hydraulic Max. Speed: 4500 rpm This 4-axis Romi GL 250 horizontal turning machine was manufactured in 2024. Consider the opportunity to buy this Romi GL 250 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2012, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 4 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady. Fsln Ursv Aaa Re Imspg

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 42 [mm] - Travel : 100 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 7.5/5.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 34 [mm] - Spindle speeds : 5000 [rpm] - Spindle power : 5.5/3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - X stroke : 140 [mm] - Z stroke : 235 [mm] - Y stroke : 70 (+/-35) [mm] - Live tools speed : 5000 [rpm] Foljuhaflon Ur Imspg - Live tools power : 1.0 [kW] LOWER TURRET - Number of positions : 6 - X/Z stroke : 140 / 310 [mm] POWER SUPPLY - Total installed power : 30 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.220 x 1.460 [mm] - Machine height : 1.700 [mm] - Machine weight : 3100 [kg] MACHINE HOURS - Number of working hours : 14540 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Bar loader : Top Automation FU342SX (2021) - Electric transformer

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Details about the Traub TNK 36 (built in 2003) The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder Fpeln Urswgpmas Imog The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 All machines can be inspected and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Condition: excellent (used), Weiler Ergodor lathe Max. Turning diameter over bed: approx. 320 mm Max. Turning diameter over support: approx. 160 mm Fsln Ursq Ixxys Imepg Max. Turning length: approx. 470 mm Bar passage: approx. 36 mm Spindle: Speed range: approx. 30 - 3550 rpm Spindle nose: A 2 - 5 Drive power: approx. 3.0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Suitable for threads: - metric 0.20 - 12 mm Inch 80 - 2 Gg/ Diametral - Pitch thread 160 - 5.5 Dp Module 0.1 - 4

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,547 h, Main Drive Spindle speed range 4000 Tool taper HSK-63 Number of axis 7 Fpolnowgf Akj Ur Imeg Movement X-Axis Movement 615 mm Y-Axis Movement 250 mm Z-Axis Movement 1585 mm V-Axis Movement 230 mm W-Axis Movement 1539 mm 1-AXIS Movement 30-210 Tools Slots in storage 72 Media Chip conveyor Yes Additional Equipment Mist filter unit High pressure cooling (14 bar) Work space rinse cleaning (2.7 bar/60 l) RMP600-Radio/Radio probe Preparation for 70 bar cooling through spindle Programmable overload detector C-axis on second spindle MO321 - Gear milling without tool TE810 - Preparation for Multi and Flash tools NO117 - Tool edge control for 5-axis continuous / Axes movements: X / Y / Z / X2 / Z2 615 / 250 / 1585 / 230 / 1388 mm / W 1539 mm / C-axis indexing 0.0001° This 7-axis Mazak Integrex i-300ST-1500U lathe was manufactured in 2012. It features a main spindle bar passage of 80mm, a tool changer with a capacity of 72 tools, and a milling spindle speed of 12,000 rpm. Additional highlights include a high-pressure cooling system at 14 bar, a chip conveyor, and a mist filter unit. Ideal for prototype production, the machine includes tooling, chucks, and jaws. For more information about this lathe, please reach out to us. Application Types Turning

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, Details about the Traub TNK 36 (built in 2002) The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder Fpolnewgpl Ns Ur Imog The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 All machines can be viewed and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Year of construction: 1970, Condition: used, Center lathe Reiden R200 Center height 200mm center width 1000mm 380V Felshtaausn Ur Imopg speed 16 - 1580 rpm

Condition: good (used), Year of construction: 2014, operating hours: 52,651 h, Functionality: fully functional, Details about the Traub TNL 32-7 (built in 2014): The machine is in good condition and has always been operated with oil. It is comprehensively equipped with: • Tool holders • Collets • Guide channels for the bar feeder Complete technical specifications and equipment details can be found in the PDF order confirmation. The following CNC lathes are for sale: Folnowgpgmo Ur Imopg • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 The machines can be inspected and tested under power in 79115 Freiburg. If you are interested or have any questions, please contact me – I can provide additional pictures or documentation upon request.

Condition: used, Year of construction: 2009, Functionality: limited functionality, CONTUR MSL-400 Compact and powerful for Fpjlnou Rtp Eo Ur Imjg flexible use: fast servo turret, (VDI-30) with 12 tools 700 mm turning length 52/74 mm bar capacity Robust roller guides CNC controls: SIEMENS, compact dimensions

Condition: good (used), Year of construction: 1996, Weiler lathe Type Condor B Center height 165 mm Center width 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle head DIN 55027 size 5 Spindle bore 40 mm Fslovbwd Ron Ur Imopg Inner taper main spindle MK 5 Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Weight 1040 kg 3 jaw lathe chuck 4 jaw lathe chuck Multifix B Rotating center punch

Condition: used, Year of construction: 1982, Lead and feed screw lathe Weisser Junior with Multifix B lathe chuck Fslnoum I Dzs Ur Imjpg

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system Fpeln Usvt Amujr Imjg