Condition: excellent (used), Friedrich Deckel FP 2 LB tool milling machine The accessories are not included in the scope of delivery, but can be purchased additionally. This universal milling machine FP 2 LB from the renowned German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable base body and is designed as a moving column machine, i.e. the machine does not lose accuracy if heavy parts (up to 1000 kg) are clamped. Another special feature is the so-called inclined bed of 45 degrees. This makes it possible, after dismantling the universal table, to clamp and machine especially V-engine blocks with 90-degree cylinder angle (e.g. American V8) directly. The long traverse path 800mm is also an advantage in this case. Cover FP 2 LB universal swivel / tilt table (± 45° / ± 15°) Lid universal dividing head Vise 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm Transport possible on request. Please also note our other offers. Fsbegyw S Te Hl T D Uegb Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 162778, MAZATROL FUSION 640MT steering unit Fgsb Hlsv Tzkre T D Uob B-axis positioning 0.001 Coolant through milling head 15 bar Automatic presetting (Tool Eye) Tool holder set.

Condition: good (used), turning diameter over bed 460 mm turning diameter over slide rest 300 mm turning length 800 mm centre height 230 mm spindle turning speed range 40 - 2000 U/min Fjb Hl T Dsvpaaqo Ujgb total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,8 x 1,5 m

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor Fob Hsupmhwel T D Ujgb - collant equipment

Year of construction: 2012, operating hours: 72,663 h, Condition: ready for operation (used), Control Unit Brand MITSUBISHI Model M700 Additional Equipment Optional used loading magazine available, requires adaptation as it is from a different machine. This Biglia B436Y2 was manufactured in 2012. A reliable horizontal turning machine, it's ideal for precision machining. Consider the opportunity to buy this Biglia B436Y2 horizontal turning machine. Contact us for more information. Fsb Hl T Dswdkque Ujgb Application Types Turning

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1000 mm centre height 200 mm centre distance 1000 mm spindle bore 50,8 mm Fob Hljv Ank Do T D Usgb speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 1,8 t dimensions of the machine ca. 2,85 x 1,4 x 1,9 m voltage 400 V main drive 5,8 KVA With chuck, Multifix toolholder and digital readout.

Year of construction: 1981, Condition: used, machine/vehicle number: 225, Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of manufacture: 1981 Weight: 11t Feb Hlsipu U Uo T D Uogb General / technical data: max. turning length: 125mm max. workpiece diameter: 168mm max. drilling depth: 125mm adjustable number of pieces: from 3,4 to 450 sec. working hours: 8.200h working spindle speed: from 90 to 1120 rpm footprint (l x w x h): approx. 4730 x 1700 x 2120mm power supply: 380V / 50Hz Accessories: 7 cross slide 8 longitudinal slides Thread cutting device 4x 2-jaw chuck Ø160mm chuck type: pull chuck with clamping diameter 15 Chuck type: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw chuck Ø160mm Chuck type: Draw chuck with clamping diameter 15 Chuck type: Röhm 1W-406 681 Clamping force 1800 da N Insertion arm over chuck 100mm. The workpiece is fed to the insertion arm by a swivel arm and rotary gripper. Remark: The machine is in very good condition and has very few operating hours. The machine is set up for crankshaft halves for small combustion engines.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 288539, High pressure coolant 15 bar, flow rate 20L/min Preparation for side chip conveyor Feb Hl T Dsv Dacze Ujgb Deduction for non-supply of chuck and main standard cylinder Spindle line complete with Kitagawa 10" chuck BB210A815 cylinder and tie rod for bar passage up to 80mm Automatic contact tool setter with breakage control function End of cycle light (yellow) led Fixed tip with integrated rotation in the CM4 tailstock Machine with certification, CE metric, frequency 50Hz Side belt chip conveyor

Condition: good (used), Year of construction: 1983, turning diameter 340 mm turning length 290 mm centre height 160 mm control Sinumerik 810T Fgob Hl T Djwbi Iyj Uob spindle bore 53 mm turning speed range 60 - 4000 U/min quill stroke 120 mm diameter of quill 60 mm tailstock quill taper MT 4 tool change unit 8 fach total power requirement 13 kW weight of the machine ca. 2200 kg dimensions of the machine ca. 2,4 x 2,0 x 1,9 mm CNC lathe - cycle controlled

Condition: used, Year of construction: 2008, turning diameter 210 / 350 mm turning length 400 mm control Fanuc 0i-TC swing diameter 500 mm travel -x axis 195 mm travel -z axis 430 mm spindle speed: 3500 1/min bar diameter 51 mm spindle bore 75 mm C-Axis 0,001 ° turret head 12 Pos. taper in tailstock-quill MK 4 tailstock travel 100 mm diameter of quill 80 mm rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min drive capacity - spindle motor 11 / 15 kW voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,2 t dimensions of the machine ca. 2,70 x 1,90 x 2,10 m Fgjb Hl Tottckme D Ujb chip conveyor 2,80 x 0,60 x 1,30 m Transformer 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (no tools in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - Open center clamping cylinder - Automatic sliding door - chip conveyor

Condition: good (used), Year of construction: 1993, Functionality: fully functional, turning diameter over cross slide: 530 mm, turning length: 850 mm, turning diameter: 450 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 330 mm, travel distance Z-axis: 850 mm, spindle motor power: 30,000 W, total height: 1,800 mm, power: 30 kW (40.79 HP), Equipment: documentation/manual, Okuma LB35 II M, OSP 5020LG, tailstock, touch setter, extraction, coolant pump 8 bar, chip conveyor, in good condition in relation to its age, very few spindle hours and very well maintained. Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Fjb Hl Tovta H Ee D Ujgb We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, GDW LZ 350 S Lathe + Accessories Manufacturer: GDW Type: LZ 350 S Condition: used Year of manufacture: 1999 Center height: 175 mm Rotation diameter over bed mm 310 Rotation diameter over cross slide mm 195 Center distance 800 mm Spindle head DIN 55027 size 5 Spindle bore mm 43 Collet bore mm 27 Inner taper similar to DIN 228 shortened ME 50 Chuck diameter normal/max. mm 160/200 Face and clamping disk diameter max. mm 315 Tool slide Cross slide travel mm 185 Top slide travel mm 115 Swivel range of the top slide 90/-65 degrees Tool system size B Tailstock with handwheel Quill stroke mm 110 Quill diameter mm 50 Mounting taper to DIN 228 3 MK 3 Gear stages 2 Spindle speeds V 45 70 90 110 140 175 220 350 rpm Spindle speeds W 250 400 500 630 800 1000 1260 2000 rpm Dimensions: 1810 x 900 x 1400 mm Weight: 800 kg Scope of delivery: Fgsbjwbqpfe Hl T D Uob - Oroginal documentation - Three-jaw chuck - Digital display - Coolant system - Multifix B tool holder - Machine feet

Year of construction: 1987, Condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Fob Hlein Ub Ts T D Ujgb Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 155436, Positioning B-axis with minimum increment 0.001 degrees Bar Feeder Interface Automatic part pick-up Fobswb Epaj Hl T D Uegb Synchronized tapping for live tools Coolant through milling head 15 bar Rear belt chip conveyor

Condition: good (used), turning diameter over bed 380 mm turning diameter over slide rest 250 mm turning length 600 mm turning speeds 90 - 1600 U/min centre height 200 mm total power requirement 4,2 kW weight of the machine ca. 1,3 t Fgeb Hleunt Stj T D Ujb dimensions of the machine ca. 2,2 x 0,9 x 1,6 m

Condition: used, Year of construction: 1999, centre height 255 mm Fgob Hljqzm Ngj T D Ujb centre distance 1080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1000 mm spindle taper KK 8 DIN 55027 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 70 mm turning speed range 2 - 2800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder MULTIFIX Typ B / CAPTO drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m chip conveyor 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Fgeb Hl Tjvta Rks D Usb Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Manufacturer: EMAG Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Further information will follow Fob Hl Tewbqnus D Ujgb

Condition: excellent (used), Year of construction: 2012, operating hours: 34,295 h, Functionality: fully functional, machine/vehicle number: TX72, turning length: 500 mm, turning diameter: 255 mm, spindle motor power: 18 W, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 500 mm, total height: 2,030 mm, total length: 2,840 mm, total width: 2,190 mm, overall weight: 9,200 kg, 2012 twin spindle CMZ with Fanuc 31i Model A control, 3 Jaw Chuck, C axis & Milling, C axis on Sub Spindle, Collet Chuck, Collets, Coolant, Interlocked guards, Low Volt Light, Magazine Barfeed, Manuals, Parts Catcher, Parts Conveyor, Shaft Unloader, Swarf Conveyor, Tool setter, Tooling, Twin Spindle, Twin Turret, Y-axis Fgeb Hevz Al Tol T D Uob

Condition: good (used), Year of construction: 2011, operating hours: 55,285 h, Functionality: fully functional, machine/vehicle number: 226093, MAZATROL MATRIX Numerical Control Double pedal for opening/closing self-centering terminals Automatic 1st and 2nd spindle presetting (Tool Eye) Bar Pusher Interfacing Kit Hinged side chip conveyor Automatic workpiece unloading device and related conveyor Enhanced external refrigerant 15bar C-axis on the second spindle Main spindle line with collet holder Second spindle line complete with chuck LNS Sprint Hydrobar Bar Loader Automatic presetting on first and second spindle Fob Hljv U Aclo T D Ujgb Standard turning/milling tool set

Condition: excellent (used), Year of construction: 2005, turning diameter 140 mm swing diameter 200 mm turning height 630 mm Control Siemens 840 S centre distance 832,5 mm turning length 380 mm spindle head Grösse 6 spindle diameter in front bearing 110 mm bed slide 2 number of cross-slides 2 turret head VDI 40 number of tools 11 total power requirement 70 kW weight of the machine ca. 22 t Fgsb Hsvvcibol T D Ujb dimensions of the machine ca. 5,8 x 8,6 x 3,8 m

Condition: good (used), Year of construction: 2004, Functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle speed (min.): 3,800 rpm, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300MY, with E-100L control, A-turret V12 all driven VDI4-40 M-function for milling, B-turret V-8, tailstock, chip conveyor, coolant system 8 bar, MY function Y-axis, touch setter, approx. 15,500 spindle hours, built in 2004, good condition and fully functional, available immediately. Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Feb Hlovta Nyj T D Uogb We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Feb Hl T Dowbpqbe Uogb Width 1350mm height 1670mm Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Condition: excellent (used), Year of construction: 2018, operating hours: 26,811 h, Functionality: fully functional, machine/vehicle number: -, turning length: 1,350 mm, turning diameter over cross slide: 715 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 106 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,350 mm, tool mount: 12 mm, total height: 2,346 mm, total length: 4,088 mm, total width: 2,129 mm, swing diameter over bed slide: 950 mm, overall weight: 10,400 kg, High specification machine with Fanuc 32iTB control. Many options including SMW Autoblok steady rest on programable Servo base, coolant through steady, high pressure coolant, enlarged left hand door to allow 920 mm swing workpiece (950 mm max). Various other options. New cost in 2018 over £200k. Fgob Hljvz Ab Uo T D Ueb

Condition: good (used), Year of construction: 2009, Functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle Feb Hl Tevta Rdj D Uegb - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.