Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copying Turning Device, Copying Turning Device for Lathes Debeh Ep Nasvl Ik Uokl The copying device comes from a lathe. Connections for oil supply and return Copying stroke: approx. 140 mm Radial travel at 60° angle: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to probe: 800 mm Weight of copying device: approx. 100 kg Good condition The matching hydraulic unit and the holders for the sample parts can be found on our website under the search term "Sauter"

Condition: used, center width: 2,000 mm, center height: 350 mm, total width: 1,100 mm, total length: 3,700 mm, total height: 1,360 mm, Used lathe: Length 3.7m Width 1.1m Dkjbowcp T Sovl Ik Uol Height 1.36m Center height 35cm Center width 2m

Condition: good (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 5005, NC Turning-Mill Center, Berthiez T1-240/50F Year of 1989 Serial No. 5005, Three-jaw chuck, center height 900 mm, swing diameter Dkebvl Iewa In Nok Uol over bed max. 950 mm, center width 6,500 mm, max. load between centers 10 t, 50-station tool changer for milling tools, tool changer for turning tools, chip conveyor, drive power for turning operation 75 kW, travel X 700 mm, SK50 cutter holder, drive power 25 kW, 2 steady rests, tailstock, equipped with 20 cutting tools, control system, Siemens, type System8, chip conveyor. Disassembly and transport are to be carried out by the buyer.

Condition: used, turning diameter over slide rest 800 mm Control Siemens 802D swing diameter 2000 mm centre height 1000 mm Dkebvljv H Etds Ik Uel

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 103342, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle speed (max.): 3,400 rpm, turning diameter: 340 mm, TECHNICAL DETAILS Turning diameter: 340 mm Swing diameter: 420 mm Turning height: 315 mm X-travel: 850 mm Z-travel: 315 mm Control: Siemens 840 DSL Spindle Spindle speeds (infinitely variable): 0 - 3,400 rpm Main motor power: 37 (48) kW Feed Feed range in X-direction: 0 - 45 m/min Feed range in Z-direction: 0 - 30 m/min Tool Tool system: 12-station turret head Tool drive power: 19 kW Tool speeds: 0 - 6,000 rpm Dkjbvlev T U T He Ik Ujl MACHINE DETAILS Total power requirement: 60 kW Machine weight: approx. 12 t Space requirement: approx. 3.7 x 3.1 x 3.3 m EQUIPMENT - CNC vertical lathe - Automatic workpiece feed

Condition: good (used), Year of construction: 2007, machine/vehicle number: G 907112, Offer 25088 Technical Specifications: - Maximum turning diameter - over bed 460 mm - Over cross slide 258 mm - Over bridge 785 mm - Center distance 1000 mm - Cross slide travel 290 mm Dkobvlowbp Due Ik Ujl - Spindle mount D 1 - 8 - Spindle bore 58 mm - Tailstock quill taper MK 5 - Tailstock quill travel 180 mm - Spindle speeds 20 - 2000 rpm - Rapid traverse X / Y - With: - 2-axis digital display - Multi-fix tool post with 5 inserts - 3-jaw chuck - Manual tailstock - Coolant system - Drive 400 V / 5.5 kW - Space requirement approx. W 1900 x H 1750 x D 1050 mm - Weight approx. 1900 kg

Year of construction: 2021, operating hours: 559 h, Condition: ready for operation (used), - USED - 4-AXIS CNC LATHE MAX ROTATING DIAMETER: 850 mm MAX TURNING DIAMETER OVER CARRIAGE: 430 mm MAX TURNING LENGTH: 2125 mm BAR CAPACITY: 103 mm SPINDLE: 3000 rpm; 18,5-26 kW; ASA A2-11 ; 315 mm X-AXIS TRAVEL: 280 mm Y-AXIS TRAVEL: ± 65 mm Z-AXIS TRAVEL: 2200 mm RAPID FEEDS X-Y-Z: 30 - 20 - 30 m/min DRIVEN TURRET HEAD: 12 ; BMT65 POS; 4500 rpm; 5,5-7,5 kW CONTROL UNIT: FANUC 0i-TF WEIGHT: 8800 Kg Dkjbsux N E Ssvl Ik Uel OVERALL DIMENSIONS: 6630 x 2100 x 2330 mm ACCESSORIES: AUTOMATIC TAILSTOCK ; SWARF CONVEYOR ; FANUC MANUAL GUIDE-I ; RAPID TAPPING ; ETHERNET PORT ; RS 232 SERIAL PORT ; USB PORT ; TOOL SETTER ; PORTABLE HANDWHEEL NOTE: HYDRAULIC SELF-CENTERING STEADY REST KHAN mod. ASR 4.0 CAPACITY 35-245 mm; MANUAL STEADY REST diam. 350 mm; No 4 DRIVEN TOOL HOLDERS; No 2 FIXED TOOL HOLDERS

Condition: used, Year of construction: 2011, Very beautiful RAIS lathe with tailstock and 5846 cutting hours. Can be inspected under power upon appointment. Availability: 04/2025 Full technical specifications in the pictures. Cnc control Fanuc Oi-TD Maximum swing over bed 535 mm Swing over carriage cover 330 mm Maximum turning diameter 250 mm (VDI), 350 mm (8 station) X axis travel 185 mm Z axis travel (maximum turning length) 600 mm Power chuck diameter Ø 210 mm Max spindle speed 3250 rpm Spindle bore Ø87 mm Bar capacity Ø75 mm Number of tool posts VDI40, 8 station Dobvl Ikjv S Hlfo Uekl Tailstock quill taper MT no.4 Quill diameter and travel Ø80 x 125 mm

Condition: used, Year of construction: 2015, Functionality: fully functional, For sale is a TRAUB from 2015. As shown in the pictures, the machine is offered with an FMB Minimag 20-3200 bar loader and a chip conveyor. Technically, the machine is in perfect condition and ready for immediate use. CONTROL .. MITSUBISHI CNC control FUNCTIONALITY .. Number of spindles: 2 .. Number of turrets: 2 .. Number of c-axes: 2 .. Number of y-axes: 1 TURNING WORKING RANGE .. Turning diameter (max.): 20 mm .. Clamping diameter for bar work (max.): 18 mm .. Maximum workpiece length: 200 mm MAIN SPINDLE .. Speed range up to: 12,000 rpm .. Spindle diameter: 20 mm .. Spindle bore: 18 mm .. C-axis: yes COUNTER SPINDLE .. Speed range up to: 12,000 rpm .. C-axis: yes COMPOSITE SLIDE .. Z-axis travel: 250 mm .. X-axis travel: 120 mm .. Travel Y-axis: 65 mm .. Total number of tool positions: 8 ELECTRICAL CONNECTION DATA .. Supply voltage: 400 V Debvlev Tzbdj Ik Ujkl .. Mains frequency: 50 Hz

Condition: good (used), Functionality: fully functional, Distance between centers: 650 mm Center height: 160 mm Spindle bore: 40 mm Speed: 48 – 2500 rpm Tailstock: MT 3 Drive power: 2.4 / 3 kW Weight: 680 kg Dimensions: 1,600 x 750 x 1,290 mm Dksbvowc Sh Ejl Ik Usl Paint finish: RAL 6011 (reseda green) Digital readout: 3-axis Fagor Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: used, Year of construction: 2004, Mazatrol 640 MT Pro Control Type: Mazatrol 640 MT Pro Captiva C6 Swing: 851 mm Turning Diameter: 760 mm Center Distance: 1500 mm Bar Capacity: 88 mm X-Axis Movement: 630 mm Dksbvlewdw Hcs Ik Uol Y-Axis Movement: 230 mm Z-Axis Movement: 1585 mm B-Axis Spindle Tilt: 225° CTS 15 Bar C-Axis Index Increment: 0.001° W-Axis Movement: 1050 mm Main Engine: 30 HP Sub Spindle Speed: 4,000 rpm Sub Spindle Motor (HP): 25/20 HP Live Tool Speed: 12,000 rpm ATC: 40 tools in magazine

Condition: used, Year of construction: 2017, machine/vehicle number: XD-38II-CN-0491-N, Special feature: The machine is equipped with a hydraulic 3-jaw chuck on both the main and pick-up spindles. The machine can be inspected at our premises. MAIN SPINDLE Maximum turning diameter: 25 mm Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) C-axis with 0.001° Stroke Z1 [mm]: Long lathe version 142 mm, Short lathe version 80 mm Synchronous guide bush unit Type of guide bush: SL38 Type of collet chuck: 173E COUNTER SPINDLE Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) Maximum pick-up diameter [mm]: 25 Max. part length ejection to the front [mm]: 90 C-axis with 0.001° stroke Z2 [mm]: 280 Type of collet chuck: 171E / 173 E TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 5 external turning tools 16 x 16 mm Cross drilling/milling device: - Quantity: 5 driven ER16 drilling/milling spindles - Power: [kW]: 2.1 (S6000) - Front drilling unit for 5 drilling quills diameter 32 mm Dkjbvljrvzdmj Ik Uel Rear machining - Tool carrier for 4 (optionally 6) tools - 2 - 4 driven drilling/milling spindles ER16 modular - 2 - 4 stationary drilling/milling spindles ER16 modular Optional Y2 axis - 4 - 5 driven drilling/milling spindles ER16 modular - 3 - 4 stationary drilling/milling spindles ER16 modular TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse m/min: 32 m/min (Z1,Z2,Y,X2, Y2) ; 24 m/min (X1) Connected load [kW]: 35 CONTROL Control type: Siemens 828 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function ACCESSORIES Alignment shoes with leveling elements Tool box and service tool set LED work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English

Condition: good (used), Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Dsbvomqkh Eel Ik Ujkl Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, turning diameter: 65 mm, The machine is new and in stock. STANDARD EQUIPMENT Main spindle 15 kW, 3,500 rpm with SINUMERIK 840D control system with 4 cross-slides on the main spindle with an 8-station VDI30x55 servo turret all stations suitable for red machining. Tool holder Central milling drive 3.3 kW, 3000 rpm Including stable polygon turning function (without tool holder) With full C-axis on the left spindle and on the pick-up spindle Including pick-up spindle With workpiece collecting tray and finished part conveyor belt for falling cut-off parts or offcuts With retractable finished part conveyor belt for unloading finished parts after back machining 4 tool holders for the back With programmable high-pressure coolant for clamping device cleaning before the next workpiece transfer With HD-KM pumps, 70 bar With separate coolant tank (180 liters) With handwheel Coolant and hydraulic pumps Bar loader interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring on all stations Control cabinet with air conditioning unit Triple signal lights The machine is also equipped with a turret Equipped for back machining. This is designed for fixed tools only. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming document for Lico machines Color Door RAL 7015 Slate Gray Debjv N I Hxovl Ik Uekl Chip tray/frame RAL 7024 Graphite Gray Housing RAL 7035 Light Gray

Condition: good (used), Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Dkjbsvzw Ddsvl Ik Uol Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Condition: new, Year of construction: 2023, Functionality: fully functional, turning diameter: 65 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 3.500 rpm with SINUMERIK 840D control system with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Dkebeug Uqgjvl Ik Ujl Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray

Condition: used, Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Dsbvjv Syqbsl Ik Uokl Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Condition: new, Year of construction: 2023, A machine directly from the Hanwha dealer HB TURNKEY (Hanwha Germany): Hanwha CNC Swiss type lathe XD10 with Fanuc control of the 0i series ( Comparable with Star SR-10J ). MAIN SPINDLE -Maximum turning diameter: 10mm max. spindle bore diameter: 10mm maximum speed [rpm]: 15.000 Maximum power [kW]: 3,7 BUILT-IN MOTOR C-axis with 0,001 stroke Z1 [mm]: 155 Synchronous guide bush unit Guide bush type: SD125 R Collet type: 1212 E COUNTERSPINDLE Maximum speed [rpm]: 10.000 Maximum power [kW]: 1,1 Dkjbvl Iegq Ravsk Uel C-axis with 0,001 maximum tapping diameter [mm]: 10 max. part length ejection to the front: stroke Z2 [mm]: 180 type of collet: 1212E TOOLING OPTIONS Tool slide X1,Y1: Tool holder plate for 5 external turning tools 8x8mm Cross drilling/milling equipment: - Quantity: 4 driven drilling/milling spindles, ER11 - Power: [kW]: 0,55, S6000 - Front drilling attachment for 4 drilling spindles - ER11 BACKWORKING - tool carrier for 4 tools - 2 driven drilling/milling spindles ER11 modular - 2 fixed drilling/milling spindles ER11 modular TRAVERSING AXES AND CONNECTION CAPACITY Number of servo axes: 6 Number of spindle axes: 2 rapid traverse m/min: 32m/min (Z1,Z2,Y,X2) ; 24m/min (X1) Connected load [kW]: 12KVA CONTROL Control type: Hanwha Fanuc 0iTF series Number of axes: 6 (X1, Z1, Y1, Y2, X2, Z2,X2) Simultaneous 4-axis control External control panel with handwheel 9.5" color monitor LCD/MDI Automatic switch-off function PowerOff Progra

Condition: excellent (used), Parallel Lathe WEILER type PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Djbvljvv Urnj Ik Uskl Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with: 1 4-jaws chuck Ø 155 mm, 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION

Condition: good (used), Year of construction: 2019, machine/vehicle number: XD-38II-CP-0703-H, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, turning diameter: 38 mm, spindle bore: 39 mm, power: 7.5 kW (10.20 HP), The machine can be viewed at our Immendingen site after consultation. Included is the original chip conveyor and a bar loading magazine from FMB 3-36 turbo Includes Büchele SFB-301 high-pressure system 150 bar 4 valves Dkobvl Ikjvtmale Uol

Condition: good (used), Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Dsbveqqkw Del Ik Ujkl Weight: approx 2,5 T

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: XE-20-DX-0683-NH, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, bar passage: 20 mm, feed length X-axis: 70 mm, feed length Z-axis: 160 mm, power: 3.7 kW (5.03 HP), A machine directly from the authorized Hanwha dealer HB TURNKEY (Hanwha Germany): MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke X1 [mm]: 70 Stroke Z1 [mm]: 160 (long turning mode) Stroke Z1 [mm]: 50 (short turning mode) Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke X2: [mm]: 315 Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 5 external turning tools 12 x 12 mm Cross drilling/milling device: - Quantity: 4 driven drilling/milling spindles ER16 modular - Speed S6000 - Front drilling unit for 5 drilling quills diameter 25 mm Rear machining - Tool carrier for 5 tools - 2 driven drilling/milling spindles ER16 modular - 2 stationary drilling/milling spindles ER16 modular TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc Hanwha 0i-TF series Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation ACCESSORIES Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (Maintenance and operating instructions incl. parameter list and test report) Dksbvl Iegmnq Hjk Uel Chip tray with 170 l capacity (not applicable with chip conveyor option) ( comparable with Citizen A20 , Star SB-20R ) - READY FOR IMMEDIATE USE - We will be happy to calculate and optimize the cycle time for you and set up your newly purchased machine at our premises. WE WILL FIND A SOLUTION - Whether standard or HB-modified

Condition: good (used), Year of construction: 2016, The machine can be inspected at our premises in Immendingen after consultation. Dkjbvlju Rmy Re Ik Ujl Included is the original chip conveyor and a bar feeder from FMB 2-20 turbo Incl. Kraft and Bauer fire extinguishing system

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: XV-26II-DW-0107-NH, spindle speed (max.): 8,000 rpm, turning diameter: 26 mm, overall weight: 2,900 kg, power: 3.7 kW (5.03 HP), The machine is on display in our exhibition and can be viewed upon request. Incl. FMB 3-36 turbo loading magazine Dobvjvt Dg Ael Ik Ujkl Incl. Büchele SFB-301 high pressure system 100 bar 4 valves

Condition: new, Year of construction: 2024, Functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. Dkjbveug Up Njl Ik Usl BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray