Condition: used, TECHNICAL DETAILS - Bar diameter : 10 - 80 [mm] - Bar length : 3700 [mm] - Adjustable bar feed speed : 980 [mm/sec] - Max. scrap length : 110 [mm] - Loading time : 32 [sec] - Max. bar weight : 180 [kg] - Oil filling : 115 [l] POWER SUPPLY Duolqzswa D S De Uwyet - Supply voltage : 230 / 400 [V] - Total installed power : 3 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4792 x 1570 [mm] - Machine height : 2000 [mm] - Machine weight : 1880 [kg] EQUIPMENT - UP Magazine

Condition: used, Year of construction: 2003, turning diameter 570 mm turning length 1500 mm control Manual Plus 4110 Heidenhain swing diameter over face slide 365 mm face travel 345 mm upper slide 125 mm centre height 280 mm drive of main spindle 21/18 kW spindle bore 62 mm spindle head DIN 55027 Gr.8 torque 2000/1700 Nm turning speed range - power take off spindle 5-2.500 U/min feed range - long. and cross 0,01-50 mm/min rapid traverse cross 5 m/min rapid traverse longitudinal 10 mm/min workpiece weight flying clamped 400 kg dimension of workpiece 1600 mm total power requirement 35 kva weight of the machine ca. 5,3 t dimensions of the machine ca. 4,3x2,3x2 m Attention!!! The machine will be delivered with Multifix as a tool holder and not with Capto as shown. Duolqz Uwevylgdsyot three-jaw chuck steady-rest

Condition: used, Year of construction: 2007, operating hours: 41,000 h, spindle bore: 165 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 1,200 mm, quill stroke: 400 mm, quill diameter: 140 mm, torque: 8,000 Nm, Technical Specifications ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. turning diameter over bed: 1,200 mm Bed width: 600 mm Spindle bore: 165 mm Spindle head DIN 55027 Gr 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Gear ratios: 2 Torque: 8,000 Nm Duslqz Usv Nhxzowyot Number of turrets: 1 Sauter 4-station head turret for 140 mm chucks Tailstock Quill diameter: 140 mm Quill stroke: 400 Features ----- Electronic handwheel Forkardt 3KS 800 mm hydraulic power chuck Chip conveyor

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: P10077, Machines available after May 15, 2025 CITIZEN M12 Automatic Lathe (7-axis) with bar feeder I will sell 1 or 2 pieces CITIZEN CINCOM M12 AUTOMATIC LATHE (JAPAN) Machine condition: serviced, connected, very good Type: Swiss type longitudinal lathe Application: turning, milling, drilling, threading High precision and production efficiency Delqz Uowdid Towysut Brand: CITIZEN Model: CINCOM M12 CNC control: MELDAS 635 LC Year of prod. / No.: 2000 / S/N: P10077 Basic data: - Number of axes: 7 (X1/Y1/Z1/X2/Z2/X3/Z3) - Synchronized counter spindle with indexing - Equipped with x2 C axes - Driven stations and tools speed 250-6000 rpm - Number of rotary tools to be installed: 5 rotary + 3 rotary - Possible number of machining tool mounts + back: 10+3 - Spindle speed range - 200-12000 rpm - MAX basic machining length - 200 mm - MAX working diameter of the main spindle - 14 mm - MAX working diameter of the counter spindle - 12 mm - Spindle motor power - 1.5 / 2.2 kW - Dimensions of mounting tools - 10 x 10 x 120 mm - Other machine parameters - table photos from documentation - Machine dimensions approx.: 240 x 120 x h-170 cm - Machine weight: 2400 kg - Power supply: 6 kW - Bar magazine feeder: FMB MINI MAG - Tool holders for the machine - Full technical documentation I have a 2nd identical M12 machine from 1999 Serial No. S/N P10066 - Machine regularly serviced - Possibility of short training in operation in our plant - FREE loading - We can help organize transport in Poland and Europe - Machine / Machines work in our Plant. We are selling due to production reorganization.

Condition: reconditioned (used), Year of construction: 1970, Heidenreich & Harbeck Hamburg 840 Condition: Used Year of construction: 1970, geometrically overhauled in 2023 Technical specifications: Swing diameter over bed: 840 mm Swing diameter over cross slide: 520 mm Duslqz Uwev N T Smeyot Center distance: 1500 mm Center height: 420 mm Motor power: 11 kW Bed width: 600 mm Spindle bore: 127 mm Longitudinal feeds: 0.08 - 2.8 mm/rev Cross feeds: 0.04 - 1.4 mm/rev Quill stroke: 300 mm Spindle speed: 7.1 - 1400 rpm Weight, approx.: 6500 kg Dimensions, approx.: 4000 x 2200 x 1800 mm Equipment: - Forkardt 3-jaw lathe chuck, D = 400 mm - 3-axis digital readout - Quadruple tool post Scope of partial overhaul: - Machine partially disassembled and repainted - Guideways ground on both sides (Z-axis, Z-axis, and X-axis) - Tailstock sleeve hard-chromed and ground (inside/outside) - New stainless steel back plate

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, Functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter: 32 mm, No reserve price - guaranteed sale at the highest bid! New price: €215,000 TECHNICAL DETAILS CNC control type: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Counter spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis Data X1/Y1/Z1 Travel X1/Y1/Z1 (with rotary spindle): 70 / 405 / 100 (240) mm Maximum Speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum Acceleration X1/Y1/Z1: 5 m/s² Nominal Thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis Data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Maximum Speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum Acceleration X2 / Y2 / Z2: 5 m/s² Dolqzsv Stuto Uwyeut Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Toolholder data for slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data for slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data for counter spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication system data Capacity: 1.8 L Operating pressure: 20 bar Downtime: 7 min Operating time: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic Unit Specifications Min. operating pressure: 5 bar Max. operating pressure: 6 bar Consumption of base machine: 180 NL/min MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) On-time: 3,743 h Spindle hours: 2,138 h EQUIPMENT - With 32 x 3000 mm bar feeder - Various channels for bar feeders - High-pressure system - Conversion kit for fixed lathe - Various collets, guide bushings, and tools

Condition: used, TECHNICAL DETAILS - Bar diameter : 10 - 80 [mm] - Bar length : 3700 [mm] - Adjustable bar feed speed : 980 [mm/sec] - Max. scrap length : 110 [mm] - Loading time : 32 [sec] - Max. bar weight : 180 [kg] - Oil filling : 115 [l] POWER SUPPLY - Supply voltage : 230 / 400 [V] Duslqz Uwjwa D Swoyst - Total installed power : 3 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4792 x 1570 [mm] - Machine height : 2000 [mm] - Machine weight : 1880 [kg] EQUIPMENT - UP Magazine

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840D Spindle bores : 51 mm Spindle: Technology:Belt-driven spindle Speed:4.500 rpm Workpiececlamping:Collet chuck, Type 177E Toolcarrier I (X/Z): Technology:Crossslides, 4 units Movement in X/Z:70/115 mm Taper:Lathetools Toolcarrier II (X/Z): Technology:Turret with 7 stations and subspindle Taper:VDI30 Duslov Rtwljqz Uwyot Tooldrive:3.000 rpm Workpiececlamping subspindle:Collet chuck Movement in X/Z:160/500 mm Toolcarrier III: Technology:Turret with 8 stations Taper:VDI30 Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Interncal cooling unit with temperature control and High-pressure, 50 bar Rawmaterialfeed:Barloader, Top Automatzioni FU350 Finished-part-removal:Parttray with conveyorbelt Oilmistseparation:Interface mechanical prepared Setup operations:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2008, operating hours: 6,700 h, Control Unit Brand FANUC Model 32i Main Drive Spindle speed range 50-3500 Spindle motor power 18/25 kW Movement X-Axis Movement 240 mm Z-Axis Movement 640 mm Delqz Uevxl N Aswysut Control Unit Brand FANUC Model 32i Main Drive Spindle speed range 50-3500 Spindle motor power 18/25 kW Movement X-Axis Movement 240 mm Z-Axis Movement 640 mm This 3-axis CMZ TL25 BM turn-mill centre was manufactured in 2008. It offers robust turn-milling capabilities, ideal for precision machining. Consider the opportunity to buy this CMZ TL25 BM turn-mill centre. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 142075, Machine available after May 15, 2025 I will sell CNC AUTOMATIC LATHE TRAUB TNM28 (made in Germany) with a dedicated bar magazine feeder Machine condition: serviced, connected, very good Brand: TRAUB Model: TNM28 / 117 Control: Mitsubishi System TX8H Year of prod. / No.: 1995 / S/N: 142075 || CHIP FEEDER: 1997 / No. 87_265 Basic data: - Average passage through the main spindle of the bar: fi28 - Tool rotation speed: 300-6000 u/min - X/Z axis travel: 60mm / 245 mm - Tool head: 8 positions - Drilling spindle speed: 560-8000 rpm - Tapping spindle speed: 160-800 rpm - Axes feeds: X1/Z1/C1/X2/Z3/Z2: in the Documentation - Number of cutting or turning slides: 4 - Main spindle speed: 63-6300 Rpm - Number of driven axes 7+1 - synchronous spindle - Cutting slide travel: 43 mm - Rapid feed: 15 m/min - Working stroke: 30 m/min - Connected power: 15 kW - Dimensions of the machine with feeder: 6.45 x 0.95 x 1.65 m - Machine weight: 2.4 T - Other parameters in the technical documentation and photos - Holders - grips (part) for the machine - Bar magazine feeder - Automatic chip feeder outside the machine - Conveyor for completed parts outside the machine - Full technical documentation I have for sale a second identical TRAUB TNM28 machine from 1996 No. 208 Delswdidteqz Uwyeut - Possibility of short training in operation in our Plant - FREE loading - We provide assistance in organizing transport in Poland and Europe - The machine / machines are working in our Plant We are selling due to the reorganization of production.

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, Weiler Commodor lead and pull spindle lathe with 3-axis digital readout from Weiler very good condition !!! CE conform Technical data: >> Year of construction 1997 Machine-No.3456 >> Center height 180 mm >> Center width 1000 mm Duolqzjrp E Utj Uwyot >> Spindle speed : from 13 to 2000 rpm >> spindle clearance 56 mm >> Short taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital readout from Weiler >> three-jaw chuck Röhm wedge bars 200mm 1 set of jaws >> Parat steel holder with 7 pockets >> Bed stop >> Electronic spindle protection >> Coolant device About the machine : We are offering a Weiler Commodor lathe in very good, fully functional condition. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital readout from Weiler makes working even easier and more accurate. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This new generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and try out this machine on site under power. Machine is available immediately.

Condition: good (used), Year of construction: 2011, Control: FANUC Duoljvzrk Seqz Uwyot max. workpiece diameter: 220 mm max. workpiece weight: 20 kg max. turning length: 175 mm max. speed: 4,500 rpm travel path: X 660, Z= 300 mm tool changer with 12 stations chip conveyor

Condition: used, TECHNICAL DETAILS - Bar diameter : 10 - 80 [mm] - Bar length : 3700 [mm] - Adjustable bar feed speed : 980 [mm/sec] - Max. scrap length : 110 [mm] - Loading time : 32 [sec] - Max. bar weight : 180 [kg] - Oil filling : 115 [l] POWER SUPPLY - Supply voltage : 230 / 400 [V] - Total installed power : 3 [kW] Duelqz Uswa D Skjwyst WEIGHT & DIMENSIONS - Machine floor space : 4792 x 1570 [mm] - Machine height : 2000 [mm] - Machine weight : 1880 [kg] EQUIPMENT - UP Magazine

Condition: good (used), Center height: 205 mm Center distance: 1500 mm Swing diameter: over bed 410 mm Spindle bore: 47 mm Spindle mount: size 6 Duelqzsv Du Ixo Uwyot Tailstock taper: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/transverse 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space required: 2800 x 1100 x 1600 mm Weight: 1330 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,581 h, General Data Measurements width 3400 mm Measurements depth 2550 mm Measurements height 2300 mm Machine weight 9500 kg Control Unit Model 840D Brand SIEMENS Main Drive Duslqjvwha Uoz Uwyot Number of spindles 2 Spindle speed range 5000 Spindle motor power 22/29 kW Movement X-Axis Movement 280 mm, X2 axis: 205 mm Y-Axis Movement 100 mm +/-50 mm Z-Axis Movement Z/Z2/Z3=900/750/750 mm Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us. Application Types Turning

Condition: new, Year of construction: 2025, turning diameter over cross slide: 270 mm, spindle bore: 58 mm, turning diameter: 460 mm, center height: 230 mm, center width: 1,060 mm, quill stroke: 130 mm, quill diameter: 60 mm, total length: 2,280 mm, total width: 1,150 mm, total height: 1,650 mm, Turning diameter in gap: 690 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, overall weight: 1,910 kg, quill mount: MK 4, metric thread pitch (max.): 14 mm, tailstock quill diameter: 60 mm, Optimum TH 4610D center lathe with DPA 31 Plus digital position indicator and quick-change tool post Hardened and ground Z-axis guideway Guaranteed spindle nose concentricity ≤ 0.015 mm Shafts, gears, and main spindle run in an oil bath Lead screw cover Precisely machined slide All guideways adjustable via V-ledges Mechanical longitudinal feed shutoff of the bed slide with four adjustable eccentrics Right/left rotation on the bed slide can be switched via a switch spindle Central lubrication in the bed slide Top slide adjustment range ± 90° Smooth-running, hardened, and ground gears mounted on two adjustable precision tapered roller bearings Switch with life cycle calculation, tested according to EN ISO 13849 Large chip guard with integrated LED Machine lamp Handwheels with adjustable fine scales of 0.04 / 0.02 mm Safety handwheels with disengagement function according to EN23125 on the X and Z axes Quick-action feed gears in a closed design, gears and shafts hardened and ground, running in an oil bath on precision bearings Adjustable thread dial scale Tailstock for taper turning adjustable ± 10 mm Tailstock sleeve and handwheel with adjustable fine scale of 0.025 mm Quick, easy, and tool-free adjustment of the tailstock using a clamping lever Cable routing via energy chain Heavily ribbed prismatic bed, induction-hardened and precision-ground from gray cast iron Coolant system with separate coolant tank with level indicator and oil separator; Easy and complete emptying and cleaning according to DIN standards Emergency stop device with foot operation Scope of delivery: Fixed steady rest, opening Ø 25 - Ø 178 mm Revolving steady rest, opening Ø 19 - Ø 114 mm LED machine light Adapter MK6-MK4 Non-revolving center MK4 Non-revolving, but temperature-resistant center MK4 Quick-change tool holder SWH 5-B Tool holder 25 x 120 Type D for 20 mm square chisel Thread gauge Set of interchangeable gears Gears for thread gauge (metric) Duolswaaf Hoqz Uwyet Initial machine filling with high-quality oil Operating tools Options available upon request; we will be happy to advise you: - Three-jaw chuck / four-jaw chuck - Steel reamer / turning tool - Mounting elements - Commissioning Do you need a different machine? Please contact us!

Condition: ready for operation (used), - USED - CONVENTIONAL LATHE WITH DIGITAL READOUT SYSTEM CENTRE HEIGHT: 500 mm DISTANCE BETWEEN CENTRES: 6000 mm MAX TURNING DIAMETER OVER BED: 1000 mm MAX TURNING DIAMETER OVER CARRIAGE: 310 mm BAR CAPACITY: 150 mm ACCESSORIES: RAPID FEEDS OVER CARRIAGE ; STEADY REST ; Delqzjqam Azj Uwyeut PLATEAU

Condition: good (used), Year of construction: 2001, Control: TRAUB TX8H Turning diameter: 500 mm Turning length: 1000 mm Spindle passage: 80 mm Turret with 12 stations Travel paths: X= 320, Z= 1070 mm Chip conveyor Duslqsvzrdrjz Uwyst Air filter Tailstock controlled

Condition: used, TECHNICAL DETAILS - Bar diameter : 10 - 80 [mm] - Bar length : 3700 [mm] - Adjustable bar feed speed : 980 [mm/sec] - Max. scrap length : 110 [mm] - Loading time : 32 [sec] - Max. bar weight : 180 [kg] - Oil filling : 115 [l] POWER SUPPLY - Supply voltage : 230 / 400 [V] - Total installed power : 3 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4792 x 1570 [mm] - Machine height : 2000 [mm] - Machine weight : 1880 [kg] EQUIPMENT - UP Magazine Dslqzjwa D Sde Uwyeut

Condition: used, Year of construction: 2005, turning diameter 140 mm swing diameter 250 mm turning height 380 mm Control SIN840 spindle turning speed - stepless 1 - 6.000 U/min power capacity at 40 % load 38,00 kW Spindle head DIN55026 - Size 6 spindle diameter in front bearing 110 mm travel -x axis 300 mm feed X-axis 1 - 30.000 mm/min rapid traverse X-axis 30,00 m/min feed force X axis 9.000 N travel -z axis 700 mm Duolov I En Rsqz Uwyot feed Z-Axis 1 - 40.000 mm/min rapid traverse Z-axis 40,00 m/min feed force Z axis 10.000 N no. of tools in turret 1 11 no. of tools in turret 2 11 tool taper VDI 40 total power requirement 70,00 kW weight of the machine ca. 22,00 t dimensions of the machine ca. 5,80 x 8,60 x H3,80 m Vertical turning machine with Siemens SINUMERIK 840D control, chip conveyor, dust exhauster, infeed and outfeed, turning gripper.

Year of construction: 2018, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 420 mm MAX TURNING LENGTH: 291 mm MAX TURNING DIAMETER: 320 mm SPINDLE: 3200 rpm; 7,5-11 kW X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 350 mm RAPID FEEDS X-Z: 24 - 30 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TF WEIGHT: 3500 Kg Dujlqeq Ilbwez Uwyot OVERALL DIMENSIONS: 2214 x 2220 x 2713 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH 16-POSITIONS GANTRY-TYPE LOADING SYSTEM

Condition: used, TECHNICAL DETAILS Duelqev Eg U Toz Uwyet - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12 [mm] - Travel : 140 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 12 [mm] - Z stroke : 140 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] - X/Y stroke : 50/272 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1740x1000 [mm] - Machine height : 1640 [mm] - Machine weight : 1700 [kg] MACHINE HOURS - Number of hours under power : 33181 [h] - Number of working hours : 8272 [h] EQUIPMENT - CNC : Fanuc i - 3 colors status lamp - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank : 120 [l] - Bar loader : Iemca Elite 112 R

Year of construction: 2002, Condition: ready for operation (used), - USED - 5-AXIS CNC LATHE MAX TURNING LENGTH: 760 mm MAX TURNING DIAMETER: 330 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; ASA A2-6 ; 210 mm COUNTER SPINDLE: 6000 rpm; 5,5-7,5 kW; 169 mm X-AXIS TRAVEL: 250 mm Y-AXIS TRAVEL: ± 50 mm Z-AXIS TRAVEL: 830 mm B-AXIS TRAVEL: 830 mm RAPID FEEDS X-Y-Z: 24 - 7,5 - 20 m/min Duslsmmlpreqz Uwyjt DRIVEN TURRET HEAD: 12 POS; 6000 rpm CONTROL UNIT: FANUC 18i-T WEIGHT: 5350 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2060 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER NOTE: PART CATCHER WITH BELT; AUTOMATIC DOOR OPENING SYSTEM

Year of construction: 1995, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 530 mm MAX TURNING LENGTH: 500 mm MAX TURNING DIAMETER: 340 mm BAR CAPACITY: 62 mm SPINDLE: 3800 rpm; 11-15 kW; ASA A2-6" X-AXIS TRAVEL: 260 mm Z-AXIS TRAVEL: 520 mm RAPID FEEDS X-Z: 15 - 20 m/min TURRET HEAD: 12 POS Delqz Uwoiidpyjyeut CONTROL UNIT: OKUMA OVERALL DIMENSIONS: 2815 x 2815 x 1745 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Year of construction: 2014, operating hours: 8,674 h, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm Duolqz Usq H Tr Tswyet SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT ; USB PORT