Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: E 3907, turning length: 200 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,300 kg, type of input current: three-phase, controller model: Mitsubishi Meldas, counter spindle speed (max.): 8,000 rpm, Long-turning lathe with FMB bar feeder! TECHNICAL DETAILS Gsdps Ah Du Hjfx Aanjkd Turning diameter over bed: 20 mm Spindle bore: 24 mm Turning length: 200 mm Spindle speed: 20–10,000 rpm C-axis resolution: 0.001° Counter spindle / pick-off station Pick-off diameter: 20 mm Turning length: 80/600 mm Spindle speed: 200–8,000 rpm C-axis resolution: 0.001° Rapid traverse rates X/Y/Z: 32 m/min MACHINE DETAILS Control system: Mitsubishi Meldas Collet size: F25 (145E) Guide bushing: Neukomm T223 (22.001) Swivel angle of the tool block: 90° Driven tool positions: 3 Number of axes: 5 + 2 C-axes Total power requirement: 2.2/3.7 kW Dimensions & Weight Footprint: approx. 2.4 × 1.1 × 1.8 m plus loading magazine Machine weight: approx. 2.3 t EQUIPMENT CNC control system FMB 3-26 loading magazine Swiveling tool block with driven tools for radial and tangential machining Guide bushing by Neukomm Documentation On-board tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS PERFORMANCE Press force: 150 t Gedo Advdbopfx Aanskd BENDING RANGE Bending length: 3,100 mm ELECTRICAL DATA Operating voltage: 3 × 380 V Frequency: 50 Hz Rated current: 63 A MACHINE DETAILS Manufacturer: Beyeler Type: RH 150-3100 Machine type: Press brake Year of manufacture: 1990 Manufacturing number: 590112896 Length: 4,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 8,500 kg Important note: The scope of sale and delivery includes a manual control without foot pedal operation; the control shown in the initial image is only an example!

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Haulick + Roos Type: RVD 63-800 HS/CNC Year of manufacture: 1980 Machine number: 1,202,097 Machine type: Punching press Press Data Press force: 630 kN Speed range: 30–800 rpm Drive power: 26 kW Stroke: 4–60 mm Stroke adjustment: 80 mm Die hole: 52 mm Table Table dimensions: approx. 800 × 600 mm Table slots: 4 MACHINE DETAILS Dimensions and Weight Length: 2,500 mm Width: 2,000 mm Height: 2,400 mm Weight: 6,000 kg EQUIPMENT Gkjdpfxs Adzics Aanjd Integrated guiding system by Haulick + Roos

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gkjdpj Aa Afdjfx Aanjd Performance data Pressure: 40 t Stroke: 280 mm Ram stroke: 8–120 mm Stroke rate: 120 strokes/min Throat: 350 mm Installation height: 270 mm Table and ram Table size: 710 × 565 mm Ram area: 500 × 280 mm Drive Total power requirement: 2.2 kW Machine data Machine weight: approx. 3.2 t EQUIPMENT No information available regarding accessories.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: SN 018-0212, travel distance X-axis: 4,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 2,200 rpm, controller model: Penta-Tec, TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 580 mm Travel range Z-axis: 700 mm Speed range of drilling head: 140–2,200 rpm Drilling diameter: 3–32 mm Tapping range: M4–M24 Drive power of drilling head: 7.5 kW Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 6 m/min Positioning tolerance X-axis: ±0.1 mm Positioning tolerance Y-axis: 0.06 mm Positioning tolerance Z-axis: 0.06 mm Distance from top of table to bottom of tool holder: 700 mm Tool holder: SK 40 Tool changer: 10 tool positions T-slots: M12 MACHINE DETAILS Control system Control model: Penta-Tec Touchscreen: 18 inches Handheld unit: RCS01 Clamping system Manufacturer: Polund – Pro-Clamp Systems Number of clamping points: 8 Rated apparent power: 12 kVA Gkedpfx As Ah Eupsansd Total weight: 6,000 kg EQUIPMENT Servomotors for X, Y, and Z axes Touchscreen control Automatic tool changer Automatic tool length measurement Handheld unit RCS01 Software extension for pendulum operation DXF software package Hydraulic draw-in clamping system with universal control Light curtain on the front Articulated belt chip conveyor

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 7,000 mm Travel range, Y-axis: 300 mm Travel range, Z-axis: 350 mm Spindle speed: 18,000 rpm Tool holder: ISO 30 Tool positions: 2 magazines with 5 + 1 tool positions each Maximum profile length: 7,000 mm MACHINE DETAILS Control system: CNC control, 3 axes Spindle power: 5.5 kW Godpfs Ahmznox Aanokd Operating pressure: 6–8 bar Machining capabilities: Five-sided machining with angled heads Number of clamping systems: 8 pieces Machine weight: approx. 3,200 kg EQUIPMENT Automatic clamping jaw positioning Dual-zone machining / pendulum operation Two tool magazines for both work areas Sawing, drilling, and milling in a single clamping operation Angled heads for five-sided machining Ideal for: Manufacturing of aluminum windows and doors, processing of lightweight metal profiles, manufacturing of PVC profiles, batch and series production, industrial production of long profiles.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: 8063MU, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Compressed air output Delivery rate: 1,740 l/min Operating pressure: 7.5–8 bar Speed: max. 1,500 rpm Electrical data Gkjdpj Ai Sfqofx Aansd Connected power: 11 kW Dimensions and weight Dimensions (L x W x H): 1,300 x 700 x 950 mm Weight: 400 kg External reference: Präzitec - Lot 4

Condition: used, Year of construction: 1984, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Material data Material width: 350 mm Coil weight: 1 t Material thickness: 0.5–6 mm Coil inner diameter: 380–540 mm Coil outer diameter: 1,500 mm Reel Reel weight: 1.3 t Reel dimensions Gsdpfxe Aaz T Ts Aanokd Width: 1.7 m Depth: 1.5 m Height: 1.6 m EQUIPMENT Reel

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Thread Cutting Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Gjdpfxo Aa Azlj Aanskd Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Thread dial Reducing sleeve 2 fixed centers Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Machine type: Press brake Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Gkedpfx Aj Adzr Roaned Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: used, Year of construction: 2000, machine/vehicle number: VH20011, controller model: Heidenhain TNC 426, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gsdpfx Aj Ah Dtwsanjkd CNC control: Heidenhain TNC 426 Tool holder: SK 50 EQUIPMENT Rotary milling head Various tool holders Note: The machine is sold without tools.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gksdj Ad H Ttopfx Aanjd GENERAL DATA Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS General Information Machine type: Single-column eccentric press Machine weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke rate: 120 strokes/min Stroke and Working Data Overhang: 250 mm Stroke: 8–100 mm Installation height: 330 mm Ram adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping plate: 700 × 480 mm Through-hole in the table: 240 mm Through-hole in the clamping plate: 110 mm Ram clamping surface: 450 × 280 mm Tilting Design Tilting stages: 4 Through-hole to the rear: 325 × 500 mm Geds Achxbopfx Aanjkd Through-hole downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Part counter Various accessories

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Gsdpfxe Ad Acqe Aanokd TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Knuth Model: UFM 2 Year of manufacture: 2008 Serial number: 143516 WORK TABLE Table dimensions: 1,330 x 320 mm Number of T-slots: 5 TRAVEL RANGES Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Connected power: 5.3 kW MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,800 mm Height: 2,000 mm Weight: 2,000 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M+, spindle speed (max.): 7,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Gsdps Ah H Ihjfx Aanskd Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tool positions MACHINE DETAILS CNC control: Mazatrol M+ Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor: MAYFRAN 4th axis with rotary indexing table: Rotamatik RM 100

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Gsdpe Aa Aqtsfx Aanjkd Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Tool holder: SK 40 Tool changer Tool changer: 44 tools Feed rate Feed rate: 10 m/min Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Wired Heidenhain handwheel Flat guideways on all axes Scrapers on the guideways Steel covers for guideway protection

Condition: used, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Press brake Condition: good Performance Data Pressing force: 80 t Bending length: 2,505 mm Frame width: 2,200 mm Total power consumption: 7.3 kVA Machine weight: approx. 5.6 t Control System Control: AMADA-MELDAS NC 9 F Controlled axes: 7 Dimensions Space requirement: approx. 3 × 2.25 × 2.20 m Geds Aa Aanjpfx Aanskd EQUIPMENT Detailed machine documentation available

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal bed-type milling machine Machine weight: approx. 11 tons Travel distances X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 630 mm Spindle and tool holder Spindle taper: SK 50 Speed range: 20–2,000 rpm Horizontal milling spindle: SK 50 Vertical milling spindle: SK 50 Feed rate and rapid traverse Gkede Aa Ahrjpfx Aanod Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Work table Table load: max. 5,000 kg Control system Control system: Philips NC 6664 Axes: 4 Program memory: available Rotary table Rotary table: NC-controlled Diameter: 630 mm Electrical data Total power requirement: 18 kW Control cabinet Control cabinet dimensions: 1,800 × 530 × 2,000 mm Dimensions Space requirement: approx. 4.6 × 2.9 × 2.62 m EQUIPMENT NC-controlled rotary table Hydraulic tool clamping Coolant system Chip conveyor Horizontal milling spindle Vertical milling spindle Separate control cabinet Safety emergency stop Important note: The machine vice, if visible in the pictures, is not included in the scope of sale and delivery!

Condition: used, Year of construction: 1993, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 160 t Retraction force: 40 t Drawing cushion pressure: 630 kN Ejector pressure: 50 kN Total power requirement: 42 kW Machine weight: approx. 19.5 t Stroke and movement data Stroke: 300 mm Stroke speed: 400 m/min Stroke speed under load: 16–42 strokes/min Return speed: 350 mm/min Drawing cushion stroke: 100 mm Ejector stroke: 50 mm Table and ram Table size: 1,500 × 700 mm Ram clamping area: 1,200 × 560 mm Gsdpe Aa Ngbofx Aanskd Working area Overhang: 360 mm EQUIPMENT Drawing cushion Ejector

Condition: ready for operation (used), Year of construction: 1961, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gkodpfx Ao Ad Iwyeanod GENERAL DATA Manufacturer: PEHAKA Type: USF 4R Year of manufacture: 1961 Machine type: Metal band saw SAWING DATA Roller diameter: 380 mm Overhang: 380 mm Workpiece height: 260 mm Table dimensions: 600 × 600 mm Cutting speed: 0–2,000 mm/min MACHINE DETAILS ELECTRICAL DATA Total power consumption: 1.5 kW DIMENSIONS AND WEIGHT Length: 1,200 mm Width: 1,000 mm Height: 1,900 mm Weight: 1,300 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled precision cylindrical grinding machine Condition: fully mechanically overhauled Machine weight: approx. 3.5 t Work Area Grinding diameter: 350 mm Grinding length: 1,000 mm Center height: 175 mm Workpiece weight: max. 120 kg Spindle and Drive Drive power: 5.5 kW Speed: max. 25,000 rpm Control System Control system: FMS 5-88 EQUIPMENT Extensive range of accessories Gjdpfxj Aa Anfe Aanekd Coolant system Electronic handwheel Separate control cabinet Safety emergency stop

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Gjdpfx Aaj Aduyhenekd Weight: 150 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 30 t Table dimensions Length: 480 mm Width: 400 mm Gkedpo Adunrefx Aanjd MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 30 Machine type: Punching machine Condition: Refurbished Dimensions Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Feed control

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 925674, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Workpiece dimensions: max. 1,000 x 550 x 220 mm Workpiece weight: max. 750 kg Travel range X/Y/Z axis: 350/220/220 mm Travel range U axis: 350 mm Travel range V axis: 220 mm Table dimensions: 680 x 450 mm Godpfxo Ai Shas Aanskd Distance from floor to table: 1,000 mm Front door dimensions: 820 mm Total dielectric fluid volume: 760 l MACHINE DETAILS Control system: Agie Charmilles Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 18 A Connected load: 10 kVA Dimensions and weight Machine dimensions: 2,000 x 1,700 x 2,000 mm Machine weight: 2,500 kg EQUIPMENT Workbench with matching accessories

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 10,000 rpm, bar passage: 20 mm, travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, Equipment: bar feeder, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar diameter: 20 mm Linear axes: 6 Travel range X1 axis: 58 mm Travel range Y1 axis: 534 mm Rapid traverse speed: max. 30 m/min Spindle speed: 100–10,000 rpm Spindle motor power: 3.7–5.5 kW Speed of driven tools: max. 10,000 rpm Tool positions: 10–14 Gsdpfx Aaj Ahgkljnskd MACHINE DETAILS Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Connected load: 13 kVA Rated current: 19 A Fuse rating: 32 A Control voltage: 115/230 V Direct current: 24 V DC Dimensions & Weight Machine dimensions: 2,400 × 2,060 × 1,370 mm Machine weight: approx. 3,000 kg EQUIPMENT ROBObar SBF-532 bar feeder