Condition: like new (used), Year of construction: 2018, operating hours: 10,974 h, Machine Name - Dugard XP Machine Model - XP 1000 S.N PV10180957 Y.O.M 2018 Descriptions - Fanuc Control 0iMF X axis travel =1050 mm Y axis travel = 540 mm Z axis travel =560mm Iiedpeuxd D Asfx Ah Uek XYZ Rapid traverse =44/44/25m/min Table size = 1200mm x 480mm 12,000 Rpm spindle Max load capacity on the table 1176kg 40 Spindle taper 36 station ATC Coolant tank TSC Swarf conveyor

Condition: excellent (used), Year of construction: 2005, FOR SALE - Emcomat 17D Lathe Year 2005 Travel in X/Z 220 / 710 mm Distance between centers - 700 mm Distance above centers - 170 mm Max. speed - 3000 rpm Spindle nose - DIN 55029 Max. drive power - 5.3 kW Quill diameter 50 mm Inner cone MT3 Ijdjxyzikopfx Ah Uoik Quill travel 120 mm Dimensions (LxWxH) 1650 x 1060 x 1635 mm Machine weight 755 kg 3 & 4 Jaw Chuck

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, number of rollers: 4, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, Akyapak 4 – Roll Initial Pinch Bending Rolls Year: 2012 Model: AHS 25/16 Capacity: 2600 x 20mm Rolling 2600 x 16mm Initial Pinch Programme control Top Roll: 330mm dia. Bottom Roll: 300m dia. Side Rolls: 240mm dia. Bending Speed: 0 – 3.5 metres / minute Isdpfexwzbzox Ah Ueik Motor: 11 kw Dimensions: 5385 x 1840 x 1611mm high Weight: 10 570 kgs

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals Ijdpfx Ahex E T Nps Uoik Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, operating hours: 7,675 h, functionality: fully functional, machine/vehicle number: 1059027, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, torque: 122 Nm, controller manufacturer: Haas Automation, controller model: Haas CNC control 32 bit, workpiece length (max.): 1,321 mm, workpiece width (max.): 457 mm, workpiece height (max.): 635 mm, workpiece weight (max.): 1,588 kg, total height: 2,570 mm, total length: 3,330 mm, total width: 2,340 mm, table width: 495 mm, table height: 107 mm, table length: 1,321 mm, table load: 1,588 kg, overall weight: 5,316 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 667 h, coolant supply: 6.9 bar, spindle motor power: 22 W, spindle nose: CT-40/BT-40, number of spindles: 1, number of slots in tool magazine: 20, mount diameter: 89 mm, tool diameter: 89 mm, tool weight: 5 g, input voltage: 440 V, type of input current: three-phase, For Sale – Haas VF-4 Vertical Machining Centre (2007 Model) Iisdpfx Ahoxu E Dzj Ujk We are selling our 2007 Haas VF-4 CNC Vertical Machining Centre, a reliable and versatile machine that has been well maintained and is ready for immediate use.

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm Iisdpfx Ahsu Iukfj Ujk can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Machine Name - Suretech Machine Model - Marpol 403 disk sander Description - Swivel circular-disc sander Power supply 415v Disc dimensions 500mm 1400 RPM Iodjuk In Uopfx Ah Ujik 700mm x 700mm x 1000mm Weight 100kg

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Iedpfx Ahox Ivpwo Ujik Type: 2H B Without tools

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Ijdpfx Asxwy S Ejh Usik Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: used, Year of construction: 2019, Dahlih MCH630 Horizontal Twin Pallet Machining Centre with Fanuc Series Oi-MF, Pallet Size 630 x 630mm, Travel (X/Y/Z) = 1000/850/800mm, B Axis = 1 deg Positioning, 6000rpm Spindle, Spindle Taper BT50, 60 Position ATC, max Table Load 1200kgs, Floor Space 4500 x 6230 x 3380mm, Machine Weight 18,000kgs. S/No. 3003020094 (2019) Ijdpfx Ahox E Umpe Usik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Iijdpfxoxcqi Ee Ah Uok Max bendingradius: 180°

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition having never been used. Available now.. Iiodpfxexy Iq Uo Ah Usk Contact us for further information.

Condition: good (used), Year of construction: 2007, turning diameter over cross slide: 370 mm, spindle bore: 104 mm, turning length: 2,000 mm, turning diameter: 554 mm, center width: 2,000 mm, turning diameter over bed slide: 554 mm, swing diameter over cross slide: 370 mm, turning diameter over top slide: 554 mm, spindle speed (max.): 2,000 rpm, total length: 4,100 mm, total width: 2,000 mm, total height: 1,750 mm, overall weight: 3,600 kg, rotational speed (max.): 2,000 rpm, Equipment: rotational speed infinitely variable, Centre distance: 2.000 mm Swing: 554 mm over bed / 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2.000 rpm 3-jaw Chuck: Schunk Ø 350 mm Camlock Controller: GE Fanuc Featured with: - 1x Fixed steady Ø 245 mm (without base plate) - 1x Fixed steady Ø 390 mm (without base plate) - 18 Parat toolpost holders - Various jaws for chuck - Centre points Ijdpfex Id Dcjx Ah Ueik - Cooling unit - Machine Manuals Country of origin: UK Motor power: 7,5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg

Condition: good (used), Year of construction: 1999, Used universal milling machine by Forthworth Model: U 500 SK 40 spindle taper Heidenhain 2-axis digital readout Isdpfx Aox Ivn Teh Ujik Huron swiveling head

Condition: used, Year of construction: 2023, Dahlih DMX500 (4+1) Machining Centre with Fanuc Oi-MF Plus Control, Table Size 500mm (dia), Travel X/Y/Z=600/900/560mm, Max Spindle Speed 15000rpm, 40 Position ATC, 20 bar Through Spindle Coolant. S/No. 301302003 (2023) Isdpfx Aox E Ulrsh Usik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Swing over bed: 1400 mm Iiodpfx Ajx Imlcsh Ujk Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm

Condition: good (used), functionality: fully functional, Year of construction: 2018, Full-option CNC press brake from Durma Model: AD S 40320 Capacity: 4100 x 320 tons Delem DA69 3D graphical control Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC-controlled Wila hydraulic upper and lower clamping Iiedpfx Ahox Ivnmj Ujk Wila crowning system Akas Fiessler laser safety Year of manufacture: 2018

Condition: used, Year of construction: 2017, Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017) Iijdpfex E Ukhsx Ah Uok Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Decoiling and rollforming line for manufacturing roof sandwich panels Max width of finished panel: 1000 mm PRODUCTION SPEED 7,30 meter per minute UP Floor 1 - Stam decoiler of 12 ton 2 - Memco embosser 3 - In-line profiling machine Ijdpfxox Imndj Ah Ujik 4 - Sheet preheating DOWN Floor 1 - Stam decoiler of 12 ton 2 - Roll forming machine 3 - Sawing machine 4 - Pick and place for the insertion of sheets in the Stam production line, max panel length 18 meter 5 - Automatic machine for the overlapping of sheets 6 - Glue device 7 - Sheet preheating room 8 - PIR foaming gantry 9 - PIR dosing bench 10 - Siempelkamp 25 meter belt press 11 - Panels Cutting Machine (Flying Saw) 12 - Stacking unit for max panellength 16 meter 13 - Horizontal packing unit Total length of the line from decoiler to stacking is 90 meters. The packing unit is located next to the stacking unit, panels are moved from the stacking unit with side conveyors.

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Model: Peddimaster 110/170 Punching capacity: 110 tons Shearing capacity: 170 tons Includes side stop and various tools Iisdpfx Ajx Iicweh Uek

Condition: used, Year of construction: 2018, Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck at 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018) Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation on the website for supply and fitting and take this into consideration when bidding on this item. Iiedox E Ugvjpfx Ah Uok Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), sheet thickness steel (max.): 20 mm, back gauge: 1,000 mm, power: 33 kW (44.87 HP), empty load weight: 20,000 kg, workpiece length (max.): 3,100 mm, throat depth: 150 mm, fully automatic shear, heavy duty shear for cutting high alloy steel, stainless steel with no torsion touchscreen CNC control: - cnc controlled backgauge - cnc controlled blade gap - cnc controlled cutting angle foldable backgauge TOP Belgian quality shear Strokes/min: 9 > 30 str/min Ijdpfxsx Imnks Ah Uoik Adjustable cutting device: 0,05 > 1,3 Adjustable cuttingedge: 0,2 > 2,5° Number of sheet holders: 16x

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Iedpfx Ajx E Ubmeh Usik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, power: 17 kW (23.11 HP), total length: 4,110 mm, total width: 2,070 mm, total height: 1,850 mm, empty load weight: 9,500 kg, workpiece length (max.): 3,100 mm, Digitale uitlezing voor achteraanslag Pneumatisch plaatondersteuningssysteem Beveiligingsscherm aan de achterkant Opvouwbare achteraanslag Strokes/min: 12 > 45 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 - 2,5° High hold system: yes Iiedpfx Asx Imlioh Uek

Condition: used, Year of construction: 2011, Mazak Quick Turn Smart 200M with Mazatrol Smart Control, 215mm 2 Jaw Chuck, 12 Station ATC, Live Tooling, Powered Tail Stock, Travel X = 225mm, Z = 605mm, Swarf Conveyor (2011) Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Iijdpfxox E Tzrj Ah Uek