Condition: good (used), Year of construction: 2006, INDEX MS52C Dolquucot Rkzwo Seut CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Equipped as pictured Under power Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005

Condition: like new (used), Year of construction: 2007, operating hours: 1,234 h, Functionality: fully functional, turning diameter over cross slide: 290 mm, turning diameter: 380 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 166 mm, travel distance Y-axis: 339 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 30 m/min, total length: 2,885 mm, total width: 1,720 mm, torque: 72 Nm, overall weight: 4,000 kg, bar passage: 56 mm, chuck outer diameter: 1,670 mm, spindle nose: 120 h5, Equipment: documentation/manual, Gildemeister CTX210 in new condition and we took it over from a school/training institute. The machine has only 364 spindle hours and 1234 operating hours! Duolquucewcftns Sot The machine is very complete with original Schunk 3-jaw and various driven and static VDI-30 holders. The machine can be viewed in operation by appointment!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 22,040 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Main Drive Spindle speed range 4000 Spindle motor power 44 kW Djlquucswgp Scs Seut Number of axis 3 Additional Equipment Oil Mist Extraction System Workpiece Measurement with Renishaw RMP40 This 3-axis WFL M-35 mill-turn centre was manufactured in 2008. Ideal for versatile machining tasks, it combines milling and turning capabilities in one machine. Consider the opportunity to buy this WFL M-35 mill-turn centre. Contact us for more information. Application Types Milling

Condition: used, Functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Left & right running. Electronic engine brake. Geared headstock, gears running in oil. 9 Spindle speeds adjustable from 52 up to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Power feed in both side as cross ways direction. Dolquuowfiaqec Sout Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €3,900.00 Ex VAT

Condition: excellent (used), Year of construction: 2019, Maximum turning diameter 406mm, Dujljv Rz Apsquuc Sot Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 52.5mm, Spindle speed, 5,000 rpm, milling speed 5,000rpm, 12 station turret, 22/11 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chuck.

Year of construction: 2010, Condition: excellent (used), Clamping pressure tester make Prema max.pressure 100 MPa Clamping - diameter 220 mm Weight 12 kg Dslquusfd Encsc Sout

Condition: good (used), INDEX MS22-8 1 INDEX C200-4 D SL control 2 NCU - Number of spindles: 8 - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm Control: INDEX C200-4 D SL controller With IEMCA SIR Bar Feed (10ft) 1 Pickup Attachment - Number of spindles: 8 - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - 1.1 Slide units: X and Z axes controlled by CNC - 1.2 slide units: X and Z axes controlled by CNC Dslquorn Uxfouc Ssut - 2.1 slide units: X and Z axes controlled by CNC - 2.2 slide units: X and Z axes controlled by CNC - 3.1 slide units: X and Z axes controlled by CNC - 3.2 slide units: X and Z axes controlled by CNC - 4.1 slide units: X and Z axes controlled by CNC - 4.2 slide units: X and Z axes controlled by CNC - 5.1 slide units: X and Z axes controlled by CNC - 5.2 slide units: X and Z axes controlled by CNC - 6.1 Slide units: X and Z axes controlled by CNC - 6.2 slide units: X and Z axes controlled by CNC - 7.1 Slide units: X and Z axes controlled by CNC - 7.2 slide units: X and Z axes controlled by CNC - 8.1 slide units: CNC-controlled swivel axes and Z-axes - 8.2 slide units: X and Z axis controlled by CNC - 1 set of draw collet holders - 1 bar loading magazine IEMCA SIR MS 22.8/33/F bundle with drilling station - 1 synchronous spindle in SL 8.1 with flushing and ejector as well as jaw chuck - Back drilling station for 3 fixed tools in SL 7.1 or 8.2 - 1 workpiece removal through a chute in SL 8 with a conveyor belt within the machine - 1 preparation for air/oil lubrication for drive devices - 1 electrical preparation, double module for SL 1,2,3 and 4 with electronic shaft - 1 electrical preparation, double module for SL 5,6,7 and 4 with electronic shaft - 1 flap for suction - UNICOOL EA interface - UNIMESS interface - 16 freely programmable inputs and outputs - CO2 fire extinguishing system - Hinged belt conveyor - High pressure pump 80 bar - Preparation for central cooling water supply - 6 double holders - 6 base plates - 1 catch - 2 The engine

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Adapter: -Short cone: size 8 (Ø135-139 mm) Dslqujwc Rvzeuc Sjut -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg

Condition: good (used), Year of construction: 2011, Functionality: fully functional, turning diameter over cross slide: 900 mm, turning length: 2,000 mm, CNC Lathe DOOSAN PUMA 700 LM Year of manufacture 2011 CNC control FANUC 21 i TB Technical specifications Turning diameter 900 mm Turning length 3200 mm Turning diameter 1030 mm Standard turning diameter 750 mm Bar stock diameter 165 mm Spindle bore 110 mm X-axis travel 471 mm Z-axis travel 2100 mm Rapid traverse - longitudinal/transverse 15/20 m/min Spindle speed 3000 rpm Spindle drive 45 kW Turret stations / tool turning stations 12 / 6 BMT 85 Speed of driven tools 3000 rpm Total power requirement 62.2 kVA Machine weight 26 tons Dimensions: Length 7357 mm Width 2710 mm Dslewhpr Soquuc Ssut Height 2590 mm Additional Equipment 12-station tool turret (all driven) Hydraulic tailstock Sandvik Capto C6 tool holders (4 pieces) SMW Autoblok hydraulic lathe chuck 630 mm Hydraulic steady rest (min. 110 mm, max. 530 mm)

Condition: ready for operation (used), Year of construction: 1996, fanuc 18T Djlquuevt S Hwjc Ssut 2 chucks weight 4500KGS

Condition: good (used), Year of construction: 2010, Swing over bed 850mm, Swing over cross-slide 670mm, maximum machining diameter 525mm, maximum machining length 2150mm, Dslqujv Rz Aiouc Sout bar capacity 102 mm, 10 station turret, spindle speed 2,800 rpm, Fanuc I series control, tool setter, steady, 12” 3 jaw , tooling and swarf conveyor.

Condition: excellent (used), Year of construction: 1995, Digital display Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Duolewhrg Sequuc Sot Tailstock

Condition: used, Year of construction: 2021, Mfd. 2021 Double NCU Double Syncron Control: Siemens SL Duslquuewh Uwyjc Sst IEMCA Sir 22-8 (3 meter) Contact us for full specifications. Machine located in Europe

Condition: used, Year of construction: 1999, turning diameter 400 mm turning length 600 mm control Turn Plus CNC Pilot 3190 total power requirement 44 kVA weight of the machine ca. 5 t dimensions of the machine ca. 6 * 2,5 * 2 m Machine has been in use until now ( 2-axis turning ) Known defects: Delquucowgkcpj Ssut - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking

Condition: ready for operation (used), Brand: SCULFORT MAXICAP Series Type: 380 x 5000 NR Distance between centers: 5000mm Diameter allowed above the bed: 780mm Diameter allowed above the carriage: 580mm Diameter allowed above the transverse slide: 580mm Diameter allowed in the broken: 1160mm Total width of the broken: 400mm Width of the broken in front of the plate with holes: 225mm Spindle drilled at: 80mm Spindle taper: CM 5 Taper of the tailstock: CM 5 Bed width: 575mm Spindle diameter at the collar: 110mm Maximum passage in the fixed steady: 380mm Maximum stroke of the transverse carriage: 600mm Maximum stroke of the orientable carriage: 200mm Maximum stroke of the tailstock quill: 250mm Motor power: 17 HP Number of steps obtained Metric: 90 Withwork: 84 Threading range Metric (mm): 0.25 to 280 Withwork (threads per inch): 0.25 to 112 Extreme values of longitudinal feeds (mm): 0.025 to 11.2 Extreme values of transverse feeds (mm): 0.012 to 5.6 Approximate weight: 4700 kgs Dujlquovn I E Eouc Sst

Year of construction: 2004, Condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CNC Pilot 4290 Additional Equipment Duelquucswgf A Re Sjt Sauter Revolver with driven tools This Gildemeister CTX 320 horizontal turning machine was manufactured in 2004. It is ideal for versatile machining tasks. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2002, turning diameter over bed 200 mm turning diameter over slide rest 120 mm centre height 102 mm centre distance 470 mm spindle turning speed range 100-5000 U/min spindle taper Schaublin W20 total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. LBH 2,0 x 0,8 x 1,55 m -Grinding unit with grinder Dolquuowh Unrjc Sout -Infinitely variable speed with frequency converter - Includes foot pedal - Includes collets as shown - Spindle cover and spindle nut missing

Condition: excellent (used), Year of construction: 1994, Rexroth System 200 BTV30 control system Swing over bed: 160 mm Swing over cross slide: 250 mm Chuck diameter: 160 mm Duelquucswhrg Eo Sst Turning length: 300 mm Spindle speed: 8000 rpm 12-station turret with driven tools Workpiece conveyor belt Chip conveyor Various tool holders

Condition: used, Year of construction: 2016, INDEX MS40C CNC Multi-Spindle Mfd. 2016 2 NCU Y-Axis 6 Spindles 40mm Control: Siemens SL IEMCA SIR Bar feed Contact us for the full build sheet. Machine INDEX MS40C, Double-NCU (Part #10901389) Electrical and mechanical attachments (Part #10766203) Index-Control C200-SL, MS40C Double-NCU (Part #10018656) Machine control panel, equipped with a 47cm diagonal flat screen (Part #10198163) Display text initial state language GERMAN as delivery state (Part #11084516) Control cabinet MS40C (Part #10815027) Duelquucewh Uwte Sst Signal light 'Smartlight' with LED (Part #10289061) Note: Machine designed for connection to TN-Network. Attention: an isolation transformer is required for other network types!!! (Part #11084577) The machine receives an EC Declaration of Conformity and a CE mark. (Part #10494305)

Condition: used, Year of construction: 2001, spindle speed (max.): 8,000 rpm, travel distance X-axis: 130 mm, bar passage: 32 mm, bar diameter: 32 mm, overall weight: 2,000 kg, controller manufacturer: MITSUBISHI, controller model: MELDAS 635LC, CONTROLS .. CNC controls MITSUBISHI MELDAS 635LC BASIC FUNCTIONS .. number of turrets: 1 .. live positions: yes WORKING RANGE TURNING .. bar diameter (max): 32 mm MAIN SPINDLE .. spindle revolutions (max): 8000 /min X/Z SLIDE Duelquucou Nkc To Sot .. X-axis travel: 130 mm .. tool fixture: Turret .. number of tool positions (total): 12 .. - rotation speeds (max): 4000 /min TOOL MAGAZINE .. number of positions: 12 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 2000 kg ATTACHMENTS (TURNING) .. bar feeder: yes .. bar magazine: yes .. chip conveyor: yes .. coolant unit: yes .. European CE standards: yes Operating hours approx.: 37,242 hours Spindle hours approx.: 14,412 hours LNS Super Hydrobar HS bar loader Incl. tool holder, F42 collets

Condition: like new (used), Distance between tips 1000 mm Tip height 230 mm Bench diameter 460 mm Bed width 350 mm Spindle cone CM6 Longidutinal stroke 750mm Vertical stroke 230mm Motor power 7.5 kw Overall dimensions 2100 x 1300 x 1600 - 2T500 Duoljumt D Toquuc Sst 8-station VDI turret Lathe new condition 100h of work

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, Functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Djlquov Uh Ndouc Ssut Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C 1 Inner Taper Type 487 D Duelquewc Nyxjuc Sst As New Condition

Condition: like new (used), Year of construction: 2023, operating hours: 320 h, Commissioning in 2024 prepared for emulsion removal of long parts main spindle extension Ø 23 mm max. headstock stroke 205 mm max. speed 8,000 rpm 6-way turning tool holder on linear slide 4-way drilling unit including drilling fixtures (front/rear) 4 driven tools for cross machining on linear slide 4 tools including drilling fixtures for rear machining with drive Duolquoupi Hcsuc Sjt speed of driven tools 8,000 rpm speed of counter spindle 9,000 rpm 7 axes bar loader IEMCA BOSS 338/32 HD

Condition: excellent (used), L & Z Lathe Center distance 1500 mm Center height 280 mm with digital display, with 2 axes 15 speeds from 24 - 2000 rpm Tool holder Parat WD 21/25 Transport dimensions: Length 2800 mm Width 900 mm Height 1700 mm Dslqswc Nt Seuuc Sout