Condition: good (used), Tornos SAS 16 6.6 Multi-Spindle Automatic Lathe Duolquowh Snvjuc Sjt Condition: Very Good Machine Name: Automatic Lathe with Sliding Headstock Manufacturer: Tornos Model: SAS 16 6.6 Condition: Good (Used) 2 Tornos SAS 16 6.6 Automatic Lathes 1 of which has an NC slide

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center Manufacturer: EMAG Type: VL 400 (Siemens) Year of Manufacture: 2021 Operating Hours: Approx. 1,848 Turret Base Unit and Y-Axis Slide Unit HP Turret Drive Unit for Driven Tools (C442) with Internal Coolant Supply Max. Speed: 6,000 rpm Crosscut Speed: 3,200 rpm Tool Carrier Unit for Driven Tools: 12 x BMT75 Circular Workpiece Transport System, O-Design Drag Frame System for 10 Workpieces Workpiece Height (including workpiece pallet): Max. 300 mm Workpiece Weight: Max. 60 kg Duelqevq Iwysuuc Sot Set (10 pcs.) Drag Frames for O-Band For Workpiece Diameters: 150 - 400 mm Blow-Off of the Workpiece and Clamping Device (Pick-up) Coolant supply: 15 bar Coolant pump, flow rate approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filter mesh 100 μm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color indicator light Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable Clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change max. = 2,200 rpm (standard speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 external finishing tool 1x 8.BMT25VL8IKX50 external roughing tool 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 Drill Bit, 20 mm Diameter 1 x 42.V522L08Ik Drill Bit, 22 mm Diameter 1 x 27.V514WNL31 Drill Bit, 14 mm Diameter Software Package Operating Instructions / Maintenance Manual 080525

Condition: good (used), Year of construction: 2005, spindle speed (max.): 10,000 rpm, overall weight: 2,150 kg, bar passage: 20 mm, total height: 2,000 mm, bar diameter: 20 mm, controller manufacturer: CINCOM, controller model: M7, number of spindles: 2, space requirement length: 3,000 mm, space requirement width: 1,400 mm, CONTROLS .. CNC controls CINCOM M7 BASIC FUNCTIONS .. number of spindles: 2 .. live positions: yes WORKING RANGE TURNING .. bar diameter (max): 20 mm MAIN SPINDLE .. spindle revolutions (max): 10000 /min COUNTER SPINDLE .. spindle revolutions (max): 8000 /min Duelsu Nkdqequuc Set X/Z SLIDE .. - rotation speeds (max): 4500 /min ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3000 mm .. space requirements -front/back-: 1400 mm .. total height: 2000 mm .. total weight approx.: 2150 kg

Condition: new, Center length ----- 2000 mm Center height ----- 280 mm Turning diameter ----- 560 mm Passage of main spindle ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 KW INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 baffles * Rapid traverse X,Y * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Fixture plate * Fixed and moving goggles * LED working light * Cooling system * Box with various tools Duelqoga Tvpjuuc Sst

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange: mounting flange -Outside: Ø 198 mm -Bolt circle: Ø133 mm / M12 -Hole: Short taper 6, cone Ø 102 - 105 mm Duolquuowcd A Ioc Sst -Dimensions total Ø 198 x 55 mm -Weight: 4.0 kg

Condition: excellent (used), Year of construction: 2015, Twin Spindle CNC Turning Centre Goodway GTZ-2600Y Year of manufacture 2015 First installed at the end customer in 2018 Siemens 828D CNC Control 8 controlled Axes Turning diameter 250 mm. Turning length 600 mm. Main spindle: Bar capacity 65 mm. Djlquuohf T N Soc Sjut Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back Spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back spindle longitudinal travel B: 690 mm. Tool turret I 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Vertical travel Y: +/- 50 mm (for off centre operations). Tool turret II 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X2 : 210 mm Longitudinal travel Z2: 620 mm. Complete weight approx. 11000 kg Length 4445 mm Width 2555 mm Height 2360 mm Power supply required 65 KVA Complete with: 3-jaw chuck. Hainbuch collet chuck. Renishaw tool measurement for both turrets. Tool holder package. Coolant system,. High pressure coolant pumps made by Grundfos 30 bar. Chip conveyor. LNS Alpha short bar magazine.

Condition: used, Year of construction: 1951, serial number 13691 3-jaw-chuck diameter 400 mm centre height 450 mm centre distance 2000 mm tail stock ja rapid clamping device 4 seiten digital readout ja nachgerüstet Djlquucjwg Ht Dj Seut steady ja

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U Duelquujt Tqgxec Sst feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t

Condition: used, Year of construction: 2003, spindle speed (max.): 10,000 rpm, overall weight: 1,750 kg, bar passage: 16 mm, total height: 2,200 mm, bar diameter: 16 mm, controller manufacturer: CINCON, controller model: M6C, number of spindles: 2, space requirement length: 3,300 mm, space requirement width: 1,500 mm, CONTROLS .. CNC controls CINCON M6C BASIC FUNCTIONS .. number of spindles: 2 .. live positions: yes WORKING RANGE TURNING .. bar diameter (max): 16 mm MAIN SPINDLE .. spindle revolutions (max): 10000 /min COUNTER SPINDLE .. spindle revolutions (max): 10000 /min X/Z SLIDE Dolquuou Ti Tioc Seut .. - rotation speeds (max): 5000 /min ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3300 mm .. space requirements -front/back-: 1500 mm .. total height: 2200 mm .. total weight approx.: 1750 kg ATTACHMENTS (TURNING) .. bar feeder: yes .. bar magazine: yes fire extinguisher Siemens, Detector tool breakage Drill holder HSP. defect - X 2 amplifiers Sale without LNS bar feeder (optional)

Condition: used, Year of construction: 1998, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Lathe Type INTEGREX 50 Year 1998 No Tailstock Mazatrol T Plus CNC The Machine Is Complete With Chip Conveyor With All Documentation Djljv Iv S Toquuc Sjut With 3 Tool Cabinets

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm Duoljwcdw Eoquuc Sjt -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg

Condition: good (used), Year of construction: 2009, operating hours: 9,400 h, CNC lathe with C-axis, driven tools + Y-axis + handling DMG - Gildemeister CTX Alpha 500 Siemens 840D sl ShopTurn control Rotation diameter over bed: 500 mm Rotation diameter over support: 290 mm Turning diameter for shafts: 200 mm Turning length: max. 500 mm Travel distances: X 190 mm Y +/- 40 mm Z 525 mm Rapid traverse: X,Z 30,000 mm/min. Y 22,500 mm/min. Spindle nose: 150h5 Spindle bearing diameter: 100 mm Bar capacity: 51 mm Spindle drive power: 20/27 kW Spindle speed: max. 6,000 rpm Spindle torque: max. 170 Nm C-axis: C-axis 0.001° Chuck diameter: 210 mm Tool turret positions: 12 Driven tool positions: 12 Tool holder: VDI 30 Tool drive power: 5.4 kW Tool speeds: 5,000 rpm Tool torque: max. 18 Nm Automatic tailstock travel: 550 mm Automation/handling system for portal parts: Huber - 3-axis Machine weight: max. 4,650 kg Accessories: C-axis and driven tools. Y-axis for off-center milling/drilling operations. 12-position tool turret. Automatic tailstock. Chip conveyor. Tool package. Djlsrx R N Isquuc Ssut Automation - HUBER 3-axis gantry parts handling system. With parts magazine. Good condition. 9400 program runtime hours. Offer number L-4860

Year of construction: 1981, Condition: ready for operation (used), An older CNC lathe Gildemeister is available. Turning diameter: 650mm, turning length: 2000mm, control: Siemens EPM, operating hours: 73347h. Including one steady rest and one tailstock. The steady rest has a crack. Documentation available. On-site inspection is possible. Duslqujwihz Ueuc Set

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,300 h, General Data Measurements width 2300 mm Delquuewgf Dbec Ssut Measurements depth 5500 mm Measurements height 2400 mm Machine weight 8500 kg Control Unit Model 31i Brand FANUC Main Drive Number of spindles 3 Spindle speed range 3000 rpm / 4000 rpm Spindle motor power 30 kW / 24 kW Spindle bore 94 mm / 65 mm Tool taper HSK - 63 Number of axis 5 Movement X-Axis Movement 510 mm X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement mm Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 1300 mm Z-Axis Rapid Traverse 12000 mm/min B-Axis Movement +/- 105° C-Axis Movement Increment 0.001°. Additional Equipment Lubrication tank with pump. Main spindle // counter spindle // milling spindle This 5-axis Biglia B1200S SMART TURN lathe was manufactured in 2014. It features a Fanuc 31i control unit, a maximum turning diameter of 750 mm, and a turning length of 1260 mm. Equipped with a tool magazine capacity of 40 posts and a milling head maximum speed of 8000 rpm. Ideal for complex machining tasks, the Biglia B1200S SMART TURN we have for sale represents a significant opportunity. For more information about this lathe, please reach out to us. Application Types Turning

Year of construction: 1999, Condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Djlqujktfiaouc Sjut Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Condition: ready for operation (used), Year of construction: 1998, turning length: 650 mm, turning diameter: 300 mm, spindle speed (max.): 1,500 rpm, Heidenhain 2-axis display Capacity 650 x 300 mm, spindle bore 33 mm Collet clamping with collet set Chuck with jaw sets Centers Dolquuewga Hqoc Sout

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm Delquuowcdv Usc Ssut -Bolt circle: Ø133 mm -Hole: short cone 6, cone Ø 103 - 105 mm -Dimensions total Ø 250 x 75 mm -Weight: 8.4 kg

Condition: good (used), Year of construction: 2005, CNC double spindle lathe Emco Hyperturn 665 MC Plus Year of manufacture 2005 Siemens Sinumerik 840D Swing diameter over bed: 600 mm Swing diameter over support: 500 mm Turning diameter: max. 430 mm Turning length: max. 744 mm Distance between spindles: max. 975 mm Dolquucovpun No Ssut Travel paths of the upper support: X1/Z1 280/750 mm Travel paths of the lower support: X2/Z2 205/705 mm Counter spindle longitudinal travel: Z3 750 mm Rapid traverse: X1/X2 24,000 mm/min. Z1/Z2 30,000 mm/min. C1/C2 1,000 rpm. Main spindle:: Spindle nose: DIN-55026 KK 6 Spindle bore: 73 mm Bar capacity: 65 mm Spindle drive power: 29 kW AC Spindle speeds: 0 - 5,000 rpm. Spindle torque: max. 250 Nm Spindle indexing: C 0.001° degrees Counter spindle:: Spindle nose: DIN-55026 KK 6 Spindle bearing diameter: 85 mm Spindle drive power: 17/22 kW AC Spindle speeds: 0 - 7,000 rpm. Spindle torque: max. 130 Nm Spindle indexing: C 0.001° degrees Upper tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Lower tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Machine weight: approx. 7,600 kg Machine dimensions: LxWxH, approx. 3,400 x 2,550 x 2,300 mm Accessories: 6-axis, CNC double spindle, double turret, turning center. 2 x spindles with C-axis. 2 x tool turret with driven tools. Main spindle with collet chuck for 65 mm bars. Counter spindle with 3-jaw chuck. Bar loading magazine. Part catcher. Finished part conveyor. Chip conveyor. Large amount of tools included! Condition: Should be in very good condition. 2 x machines available! Offer number L-4892 + L-4893

Year of construction: 2003, Condition: excellent (used), Citizen M32 V CNC automatic lathe Max. Machining diameter: 32 mm Max. Machining length: 320 mm per chuck Max. Diameter for frontal drilling: 12 mm Max. Diameter for frontal tapping: M10 Diameter of spindle passage: 36 mm Main spindle speed: 200 - 8000 rpm Change of main spindle speed: digits S + 4 without graduation Step feed of the main spindle: 1°. C-axis of the main spindle: 0,001°. Max. Clamping diameter of counter spindle: 32 mm Max. Length of the part to the front during backward machining: 145 mm Max. Protrusion of the parts from the counter spindle: 65 mm Max. Drilling diameter in backward machining: 10 mm Max. Max. threading diameter in backworking process: M8 Counter spindle speed: 200 - 7000 rpm Graduated speed change, counter spindle: digits S + 4 without graduation Graduated feed rate, counter spindle: 1°. C axis of the counter spindle: 0.001°. Tool spindle of tool holder 1 Max. Drilling diameter: 7 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle from tool holder 2 Max. Drilling diameter: 10 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle of the counter spindle tool holder Max. Drilling diameter: 7 mm Max. Max. thread diameter: M6 Spindle speed, stepless: From 200 - 5000 rpm Count of step feed for turret station: 20 Number of mountable tools: Up to 21 tools Rotary chisel in tool holder 1: 5 tools Driven tools in tool holder 1: 4 tools Tools in tool holder 2: 3 tools Tool holder for turret tool holder: Ø36-Ø12 (positioning pins) Tool dimension Duolquujktffdsc Sst tool, tool holder 1: 16 x 16 x 130 mm Tool, tool holder 2: 16 x 16 x 90 mm Sleeve (tool holder 2): Ø 25.4 mm Sleeve (counter spindle tool holder): Ø 25.4 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 1): Ø 10 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 2): Ø 10 mm / Ø 60 x Ø 15.875 Ø 63 x Ø 16 Ø 60 x Ø 25.40 / Ø 63 x Ø 22 Ø 32 x Ø 10 / Ø 80 x Ø 15.875 Rapid traverse X1, Y1, Z1: 20 m/min X2, Z2: 20 m/min Y2: 8 m/min X3, Z3: 20 m/min Smallest increment X1, Y1, Z1: 0.001 mm X2, Y2, Z2: 0.001 mm X3, Z3: 0.001 mm Axis stroke X1: 108 mm Y1: 275 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 202 mm X3: 238 mm Z3: 410 mm Bar length: 2500 mm Central height: 1132 mm Motors 2,2 / 3,7 kW 3,7 / 5,5 kW For control of guide bush: 0,75 / 1,5 kW For control of counter spindle: 0,75 / 1,5 kW For tool spindle of tool holder 1: 1 kW For tool spindle of tool holder 2: 0,75 / 1,5 kW For tool spindle of counter spindle tool holder: 0,75 kW X1: 0.4 kW Y1: 0,75 kW Z1: 0,75 kW X2: 1 kW Y2: 0.75 kW Z2: 0,75 kW X3: 0,75 kW Z3: 0,75 kW T1: 1 kW For main spindle chuck: 0,2 kW For counter spindle chuck: 0,2 kW For the extractor: 0,2 kW For unloading the products from the machine: 0,2 kW For the coolant: 0,4 kW For the lubricating oil: 0,004 kW Dimensions: 2770 x 1370 x 1820 mm Weight: 3100 kg For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: good (used), Year of construction: 2012, S&T ST-40/55 VC Vertical Turning & Milling 2012 Fanuc 31i CNC Table diameter 4000 mm Turning diameter 5500 mm Turning height 2600 mm Table drive motor 60/75 KW Table speeds 60 rpm C-Axis 0.001° Milling spindle motor 22/26 KW Milling spindle speeds 1500 rpm 16 station tool changer Delem Shcrequuc Sjut Proposal Number V(K)-6833

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Dujlquowg Takjuc Sst Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 1989, Very good condition Conventional VTL for sale from end user / factory Morando (Italy) Model VS 12 Built 1989 DRO digital readout Hydraulic clamping chuck diameter 1200 mm Table load capacity max. 7.5 t (7500 kgs.) Turning diameter max. 1400 mm Delquucevy Dwzj Sjut Turning height max. 1000 mm Left ram vertical travel 1000 mm. Swivel range +/- 25° Right ram (5 position turret) vertical travel 760 mm. Swivel range +/- 25° Table drive motor 37 KW Table speeds 4.5 - 252 rpm Conical turning Chip conveyor Chip and splash guards Weight 20 t. Very good condition and can be inspected under power. Proposal Number V(K)-7032

Condition: excellent (used), STAR SR-20R sliding headstock automatic lathe TECHNICAL DATA Spindle diameter: 20 mm turning length: 205 mm Speed range - spindle: 500 - 12,000 rpm Drive power, spindle motor: 2.2 / 3.7 kW Travel X: 265 mm Speed range, counter spindle: 500 - 8000 rpm Drive power, counter spindle motor: 1.5 / 2.2 kW C-axis: 0.001° 19 tool positions: Linear tool holder, front attachment, rear machining SCOPE OF OFFER U.A: (list not exhaustive): STAR SR-20R sliding headstock automatic lathe LNS bar loader transformer Coolant tray Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information Dolquusu Hkh Rjc Seut

Condition: excellent (used), Year of construction: 1991, CNC vertical lathe with tool changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/retrofit Siemens 828D (retrofit) Faceplate diameter: 1,400 mm Face plate load: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Djlquuetx Au Hoc Sjut Turning height: max. 1,500 mm Plunger input bore: min. 340 mm Number of rams: 1 Ram cross travel: X 1,900 (+/- 950) mm ram vertical travel: Z 1,000 mm Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverse: X,Z 8,000 mm/min. Crossbeam vertical travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm. Gear stage: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on faceplate: max. 40,000 Nm Automatic tool changer: Tool magazine positions: 20 Tool radius: max. 200 mm Tool length: max. 675 mm Accessories: Large tool pack; Large spare parts package; Large package of clamping jaws; Full cladding; Chip conveyor; Coolant system; New coolant and flood coolant pumps. Condition: Very good condition. The mechanical condition is very good. Completely new electrics and Siemens 828D Siemens ONE system. The machine works with very high accuracy. Offer number V(K)-6899

Condition: excellent (used), Year of construction: 1995, turning height: 3,200 mm, turning diameter: 3,300 mm, feed length Z-axis: 1,700 mm, faceplate diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 2,000 rpm, year of last overhaul: 2020, CNC vertical lathe with C-axis + milling spindle Doerries Scharmann VC-3500/300 year of construction 1995 Duelquucjqy Nmas Sjt Fanuc 18iTB Faceplate diameter: 3,000 mm Faceplate load: max. 50,000 kg Turning diameter: max. 3,300 mm Turning height: max. 3,200 mm Travel distances: X -2,550 / +2,550 mm Z 1,700 mm Crossbeam vertical travel: W 1,800 mm Support sleeve size: 250 x 250 mm Rapid traverse: X/Z 6,000 mm/min. Table drive power: 105 kW Table speeds: 0.6 - 110 rpm. Torque at table: max. 140,000 Nm C-axis: 0.001° Tool magazine positions: max. 27 Driven positions: max. 17 Milling spindle speeds: 10 - 2,000 rpm Milling spindle drive power: 22 kW Tool holder: BT50 Accessories: Extended + retrofitted Retrofit + update/extension 2020 Condition: Very good Offer number V(K)-6834