Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,290 h, Functionality: fully functional, machine/vehicle number: S2AW3901, turning length: 320 mm, turning diameter over cross slide: 325 mm, turning diameter: 114 mm, spindle motor power: 6,500 W, spindle speed (min.): 1 rpm, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 100 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 320 mm, tool mount: 16 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, rotational speed (min.): 1 rpm, type of input current: three-phase, bar passage: 25 mm, swing diameter over bed slide: 325 mm, overall weight: 2,100 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO MAXXTURN 25 SMY(2008) with FMB turbo 2-20/ 3200 "A" bar loader(2010) With Y-axis, sub spindle, part ejector and parts catcher for complete automatic production of complex small turned and milled parts. Control: Siemens sinumerik 810D powerline with shopturn conversational programing. Extremely easy to set up and program. Work area Swing over bed Ø 325 mm Swing over cross slide Ø 150 mm Main spindle / counter spindle distance 485 mm Maximum turning diameter Ø 114 mm Maximum part length 315 mm Maximum bar diameter Ø 25,4 mm Travel Travel in X 100 mm Travel in Z 320 mm Travel in Y +20 / –15 mm Travel in in Z2 350 mm Main spindle Speed range 0 – 8000 rpm Torque at spindle 30 Nm Spindle nose Ø 70 h5 Spindle bearing Ø 60 mm Spindle bore hole Ø 33 mm Counter spindle Speed range 0 – 8000 rpm Torque at spindle 20 Nm Spindle nose Ø 70 h5 Spindle bearing Ø 45 mm C-axis Resolution 0,001° Rapid motion speed (Siemens) 1000 rpm Spindle indexing 0,01° Drive power Main spindle 6,5 kW Counter spindle 3,5 kW Tool turret Number of tool positions 12 Number of indexing positions 36 VDI shaft (DIN 69880) VDI16 Tool cross-section for square tools 12 x 12 mm Shaft diameter for boring bars 16 mm Turret indexing time 0,2 sec Driven tools Speed range 0 – 6000 rpm Maximum torque 4 Nm Maximum drive power 1,2 kW Number of driven tools 6 Feed drives Rapid motion speed X / Y / Z 20 / 10 / 30 m/min Feed force in the X / Y / Z axis 3000 / 4000 / 4000 N Positioning spread according to VDI 3441 in X / Y / Z 3,5 / 3 / 4 µm Coolant system Tank volume 140 liters Standard pump power 0,57 (2,2) kW Pump capacity at 3,5 bar / 1 bar 15 / 65 l/min Power consumption Connected load 12 kVA Compressed air 6 bar Dimensions and weight Folq Npjwh T Tajg Iegb Height of spindle center above floor 1140 mm Total machine height 1870 mm Foot print (without chip conveyor) LxD 2180 x 1425 mm Total weight 2100kg Machine is in great condition, holding micron tolerances all day and comes fully equipped with tooling and clamping units. Additional equipment: Röhm Collet chuck 148E with set of collets on main and sub spindle. Additional collet chuck 5C with full set of collets for sub spindle. 2 coolant pumps with trough spindle coolant on sub spindle. All the tooling, inserts, holders, collets and measuring equipment in the pictures are included with the machine! 3 sets of sleeves for FMB turbo 2-20 bar feeder. All machine documentation is present. Machine was serviced by certified EMCO technicians. Machine is under power and in production until sold. Can be checked and tested with prior arrangements.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS: CNC Control: MAZATROL 640 T X-axis mm: X-axis mm: 190 Z-axis mm: Z-axis mm: 515 Y-axis mm: Y-axis mm: - Maximum Turning Diameter mm: / Max. Turning Diameter mm: 350 Cº Axis Increase: - Maximum Turning Length: Max. Turning Length mm 515 Cutting feedrate mm / min X, Z, Y: Cutting feedrate mm / min X, Z, Y Swing over bed mm: Ø 575 Felq Npgowdwmpo Isgb Swing over slide mm: Over cross slide mm: Ø 510 Bar work capacity mm: Ø 77 Rapid traverse max. mm / min X, Z, Y: Rapid traverse max. mm / min X, Z, Y: 30,000 / 33,000 Main Spindle L-SPINDLE 250 mm Spindle speed rpm: Spindle speed rpm: 35 - 4,000 Spindle power kW: Spindle power kW: 26 Torque Nm: Torque Nm: - Spindle bore Main mm - Spindle nose Main A2-6 Turret Positions Upper Turret Positions: 12 Number of rotating tool stations (Each turret): 12 Rotating tool speed: Rotary Tool power: EQUIPMENT: Chip Conveyor Cooling System Turret Plate 250mm - Chuck 250mm Counter point - Tailstock MACHINE DIMENSIONS: Length mm / Length mm: 3,500 Width mm / Width mm: 1,700 Height mm / Height mm: 2,000 Weight kg / Weight kg: 6,000

Year of construction: 2020, Condition: like new (used), Bar feeder for bar diameters from 5-65 mm previous use on a Mori Seiki machine as new condition , immediately free Steady rest bar length 3 m Fslq Npel Dwczog Isgb many accessories Location : Switzerland

Year of construction: 2002, Condition: ready for operation (used), A Citizen CNC precision lathe is available. Turning diameter: 32mm, turning length: 320mm, front drilling diameter: 12mm, front tapping: M10, bar capacity: 36mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter-spindle clamping range: 32mm, speed: 7000rpm, rear machining length: 145mm, tool positions: 10, weight: approx. 3000kg, control: Mitsubishi Meldas M635, operating hours: approx. 90000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 5-42, collet chuck F37 and chip conveyor. Documentation available. On-site inspection is possible. Fgolq Npgowa A Sij Iob

Condition: refurbished (used), Straight Bed Machine Distance between centers: 30" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse New 3 Jaw Coolant New 2 axis DRO Folot Ifpqeq Npg Iegb Main motor: 7.5 hp Machine fully refurbished (Reground slideways) Chuck guard TBC Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: used, Year of construction: 2008, turning diameter 900 mm turning length 1.600 mm control FANUC 21i TB turning diameter over bed 1.030/800 mm bar passage 160 mm Folq Npevzhcdsg Iegb travel -x axis 450 mm travel -z axis 1.650 mm speed X/Z 12 /16 m/min total power requirement 64,4 kVA weight of the machine ca. 16 t dimensions of the machine ca. 5.760 x 3.145 x 2.780 mm

Condition: good (used), Year of construction: 2008, Description: Takisawa Manufacturer: Takisawa Type: EX-310 Turning length approx. 500 mm. Rotation diameter: approx. 260 mm. Equipment: Control: Fanuc 21i-TB Bar loader for bar length 1.5 m Tailstock Fjlqstrd Srj Npg Iogb Turret with 12 tool stations and driven tools. Three-jaw chuck Ø 250 mm.

Condition: used, _____ Description: Year of manuf. : 2022 Control : Fanuc 0i-TF Plus Turning diam. : 360 mm Turning length : 490 mm Mainspindle: Technology:Belt-driven spindle Speed:4.500 rpm Power (max.):18,5 kW Torque (max.):313 Nm Bar capacity:68 mm Workpiececlamping:Colletchuck Subspindle: Technology:Motorspindle Speed:6.000 rpm Fgslsv Uurxjq Npg Ieb Power (max.):7,5 kW Torque (max.):51 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop mini Axfix Gr. 65 Movement in B:580 mm Rapid travers in B:24 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:BMT65 Tooldive:5.000 rpm, 5,5 kW, 37,5 Nm Movement in X/Y/Z:235/100/580 mm Rapid travers in X/Y/Z:18/12/24 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Oilskimmer and Highpressure, 10 bar Toolmeasurement:Automatic Measuringarm Rawmaterialfeed:Barloader, Top Automazioni XFiles-S 365M Finsihedpartremoval:Part catcher with collecting boc Toolholder:Misc. static and driven toolholder Further Equipment:Trafo, Rinsing pistol

Condition: used, Year of construction: 2001, Emco Turn 365 MC with counter spindle + chip conveyor (can be inspected under power) Year of manufacture 2001 Bar loader present --> feed cylinder defective Operating hours: read 16,000 Used condition Siemens control system Control cabinet cooling unit Has been inspected Work completed: Main and counter spindle belts checked! Geometry completely measured and adjusted. New drive modules and E/R module Folq Njv I Udnopg Ijgb Some work is still being done on the machine.

Year of construction: 2004, Condition: ready for operation (used), A Citizen CNC precision lathe is available. Bar diameter: 20mm, turning length: 205mm, main spindle speed: 10000rpm, axes: 7, C-axis resolution: 0.001°, Y-axis: +/-500mm, machine dimensions X/Y/Z: approx. 2200mm/1300mm/1800mm, weight: approx. 2300kg, control: Mitsubishi Meldas M635, operating hours: approx. 65000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar loader FMB Turbo 3-26 and collet chuck 145E. Documentation available. On-site inspection is possible. Fjlq Npjwa A Speg Ijgb

Year of construction: 2012, Condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Fgelq Njpiay Sspg Iob Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Condition: good (used), Year of construction: 1998, Mori Seiki SL 250, Built in 1998, Mori Seiki MSP 501 control system, Turning length approx. 1000 mm, NC technology, gantry loader up to Ø approx. 100 mm, 1 12-station turret, Spindle speed up to 3,500 rpm, Driven tools, Counter spindle, C-axis, 2 x three-jaw chucks, 1 x collet chuck, Chip conveyor, Fgelq Npev Uxiuog Iob Fixed holders, Driven tool holders,

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Description Control system: Fanuc 21i-T Fjlq Nstq Tnujpg Iegb Circulation diameter (max.): 260 mm Chuck diameter (max.): 250 mm Motor spindle speed: 4,500 rpm Clamping cylinder: Full clamping cylinder Tool carrier: 12-position disk turret without lifetool Tool holder: VDI 40 Workpiece feed: Workpiece circulation belt with drag frame. Chip conveyor: Hinged belt conveyor.

Condition: used, Year of construction: 2011, 2011 Mazak Quick Turn Nexus 250-II M in superb condition with Mazak Matrix Nexus Control, 12-position turret, live tooling , chip conveyor, high-pressure coolant system, automatic tool presetter, and part catcher. ----- Machine Specification: CONTROL Mazak Matrix Nexus Control 15” Color LCD Touchscreen Mazatrol conversational programming (also supports G-code) Networking capabilities: Ethernet, USB, FTP, DNC CAPACITY Chuck size (main spindle): 10” Maximum swing: 610 mm Fgelqovt Ehzj Npg Ijb Maximum machining diameter: 350 mm Maximum turning length (1000 mm bed): 1,025 mm Maximum turning length (500 mm bed): 515 mm Max bar work capacity (main spindle, dependent on chuck system): 76 mm MAIN SPINDLE Rotating speed maximum: 4,000 min⁻¹ Motor output (30-minute rating): 26.0 kW TURRET Number of tools: 12 Mill spindle motor output (10-minute rating): 5.5 kW FEED AXES Travel (X axis): 190 mm (500 mm bed) / 225 mm (1000 mm bed) Travel (Z axis): 515 mm (500 mm bed) / 1,025 mm (1000 mm bed) / 1,535 mm (1500 mm bed) Rapid traverse (X axis): 30 m/min Rapid traverse (Z axis): 30 m/min ACCESSORIES Chip conveyor (optional) High-pressure coolant system (optional) Automatic tool presetter (optional) Part catcher (optional) MACHINE SIZE Machine dimensions (L x W x H): 2,475 mm x 1,780 mm (500 mm bed) / 4,382 mm x 2,095 mm (1500 mm bed) Machine weight: Approx. 7,500 kg Total power consumption: Approx. 20 kVA Control: Mazak Matrix Nexus Control Spec: Spindle Bore 76 mm | Max Swing 610 mm | Travel mm X 190 Z 616 Accessories: Tailstock, Tool setter, Parts catcher, Swarf conveyor & Tooling Package

Year of construction: 2006, Condition: ready for operation (used), A Citizen L-720 VIII CNC precision lathe is available. Turning diameter: 20mm, turning length: 200mm, front drilling diameter: 12mm, front tapping: M8, bar capacity: 24mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter spindle clamping range: 20mm, main spindle speed: 10000rpm, counter spindle speed: 8000rpm, rear machining length: approx. 150mm, tool positions: 6 driven + 6 fixed. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1800mm, weight: approx. 2400kg, control: Mitsubishi Meldas 700, operating hours: approx. 75000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 3-26 and collet chuck 145E. Documentation available. On-site inspection is possible. Fgjlqjwa A Sve Npg Ijb

Condition: good (used), Year of construction: 1995, Mori Seiki ZL 15 SMC, built in 1995, MSC 516 control, 1 12-station turret, Felqjv Uw Dwo Npg Iogb 2 6-station turrets, driven tools on turret 1, C-axis, spindle speed up to 3,000 rpm, chip conveyor, collet chuck, 2 three-jaw chucks, rigid holders, driven tool holders,

Condition: good (used), Year of construction: 1998, Emag VSC 200 with workpiece conveyor and chip conveyor. Fslqetq Ifno Npg Isgb The main spindle bearings were replaced in 2005. Control: Siemens 840D Turning diameter: Ø 260 mm. Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, width: 1,800 mm, height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only used in 1-2 shift operation.

Year of construction: 2003, Condition: ready for operation (used), A Citizen CNC precision lathe is available. Turning diameter: 32mm, turning length: 320mm, front drilling diameter: 12mm, front thread cutting: M10, bar capacity: 36mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter spindle clamping range: 32mm, speed: 7000U7min, back machining length: 145mm, tool positions: 10, weight: approx. 3000kg, control: Mitsubishi Meldas M635, operating hours: approx. 80000h. Including coolant unit with 30bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 5-42, collet chuck F37 and chip conveyor Knoll with a year of manufacture of 2009. Documentation available. On-site inspection is possible. Fjlq Nowa A R Sspg Ijgb

Condition: used, Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, We offer 4 pieces Emag VL 3 for sale. Three machines with Lifetool. One machine without Lifetool. Year of construction of the machines 2000-2001 General description: Manufacturer: Emag Machine type: VL3 Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t A used three-jaw chuck is included with every machine. The description is non-binding and should be checked during an inspection. Fgelqjtrdlae Npg Iob

Year of construction: 2006, Condition: ready for operation (used), A Citizen L-720 VIII CNC precision lathe is available. Turning diameter: 20mm, turning length: 200mm, front drilling diameter: 12mm, front tapping: M8, bar capacity: 24mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter spindle clamping range: 20mm, main spindle speed: 10000rpm, counter spindle speed: 8000rpm, rear machining length: approx. 150mm, tool positions: 6 driven + 6 fixed. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1800mm, weight: approx. 2400kg, control: Mitsubishi Meldas 700, operating hours: approx. 75000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 3-26 and collet chuck 145E. Documentation available. On-site inspection is possible. Fgolq Npgewa A S No Iob

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Fgelq Njtpu Szopg Isb Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Year of construction: 2006, Condition: ready for operation (used), A Citizen L-720 VIII CNC precision lathe is available. Turning diameter: 20mm, turning length: 200mm, front drilling diameter: 12mm, front tapping: M8, bar capacity: 24mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter spindle clamping range: 20mm, main spindle speed: 10000rpm, counter spindle speed: 8000rpm, rear machining length: approx. 150mm, tool positions: 6 driven + 6 fixed. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1800mm, weight: approx. 2400kg, control: Mitsubishi Meldas 700, operating hours: approx. 75000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 3-26 and collet chuck 145E. Documentation available. On-site inspection is possible. Fgslq Npgswa A Tae Isb

Year of construction: 1988, Condition: ready for operation (used), Center height: 420mm, turning length: 600mm, orbital diameter over bed/face slide/in the offset: 900mm/1150mm/800mm, max. workpiece weight: 2500kg, spindle diameter in front bearing: 203mm, face plate diameter: 800mm, max. torque: 8000Nm, spindle bore: 100mm, max. chuck diameter: 1150mm. Bed slide longitudinal stroke: 600mm, face slide face stroke: 600mm, feed X/Z: 5m/min, speed: 710rpm. Machine weight: approx. 15000kg, control: Siemens Sinumerik System 3, repairs carried out: Cross slide (2022), guideways/wedge power, control components, main spindle motor, wiper (annually), V-belts and ball screws. Including dry casting machining (without cooling lubricant system), hydraulic unit, automatic door and chip conveyor. Documentation available. On-site inspection is possible. Fgelq Npswa A Tysg Iob

Year of construction: 2003, Condition: ready for operation (used), A Citizen CNC precision lathe is available. Turning diameter: 32mm, turning length: 320mm, front drilling diameter: 12mm, front tapping: M10, bar capacity: 36mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter-spindle clamping range: 32mm, speed: 7000rpm, rear machining length: 145mm, tool positions: 10, weight: approx. 3000kg, control: Mitsubishi Meldas M635, operating hours: approx. 77000h. Including coolant unit with 30bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 5-42, collet chuck F37 and chip conveyor Knoll with a year of manufacture of 2009. Documentation available. On-site inspection is possible. Fgolswa A Sceq Npg Ieb

Year of construction: 2006, Condition: ready for operation (used), A Citizen L-720 VIII CNC precision lathe is available. Turning diameter: 20mm, turning length: 200mm, front drilling diameter: 12mm, front tapping: M8, bar capacity: 24mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter spindle clamping range: 20mm, main spindle speed: 10000rpm, counter spindle speed: 8000rpm, rear machining length: approx. 150mm, tool positions: 6 driven + 6 fixed. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1800mm, weight: approx. 2400kg, control: Mitsubishi Meldas 700, operating hours: approx. 75000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 3-26 and collet chuck 145E. Documentation available. On-site inspection is possible. Fgelewa A S Aoq Npg Ijb