Condition: new, The 1 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability for a wide range of applications in mechanics and repair shops. With a press force of 5 kN and a throat depth of 100 mm, it is particularly suited for press-fitting and pulling bearings, aligning, and bending tasks. The simple functionality of this press, combined with the included operator manual, makes it an essential tool for any workshop. As a product of KNUTH, you can trust in its performance and durability. To enhance your workshop, consider this indispensable Manual Workshop Press and request a quote today to ensure you meet all your pressing needs. Iodpfx Aeu E I Ewoh Ujtr

Condition: like new (used), Karl Pfisterer, le principal fabricant de Electro-hydraulique. presses à balles Le sabot du câble me presse beaucoup d'accessoires. Tout était bien entretenu. Accessoires voir liste. (Aucune garantie de complétude n'a été trouvée sporadiquement et tout était là)! Boîte en bois pratique. Pince de câble Plus d'articles - neufs et d'occasion - peuvent être trouvés dans notre magasin! Itoded I Hffspfx Ah Uer Frais de port internationaux sur demande!

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Nominal capacity: 100 tons Table length: 3110 mm Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Maximum nominal stroke: 250 mm Ijdpfx Ahsxaz Ige Uetr Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Condition: used, Year of construction: 1966, functionality: unexamined, punching force: 240 t, We are selling a Weingarten PS180 press here. According to the nameplate, it has a punching force of 240 tons. We purchased the press as fully functional approximately 20 years ago, but it has never been connected or put into operation since the intended project for this machine never materialized. Therefore, the coupling elements, control cabinet, and air reservoir remain dismantled, but everything is complete. As a result, on-site demonstration is of course difficult. Itodex Ei Iuopfx Ah Usr

Condition: new, Year of construction: 2025, - Capacity 160 tons - Cylinder stroke 400 mm Iedpfx Ahex Azghe Ustr - Working width 1000 mm - Pressure gauge - Emergency stop - 400V

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Isdpfx Ahev Srfdj Uotr Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: new, The KNWP 30 M is a reliable manual workshop press within the Workshop Presses category, ideal for various pressing tasks, including assembly, testing, and straightening workpieces. Made in Europe, this robust machine combines a rigid, machined weldment structure with a versatile hydraulic pump, which can be operated via both hand and foot controls. Its sophisticated two-step hydraulics allow for seamless transitions between quick-stroke and work stroke, while an automatic reset piston ensures efficient operation, adjustable via a throttle valve. The support table, easily adjustable in height, enhances usability and comes with a multi-function die for effective straightening of both flat materials and corrugation. Whether for straightening beams or material testing, the KNWP 30 M provides the power of a 30 t pressure force with a total piston stroke of 160 mm, making it a must-have in any mechanical workshop, garage, or locksmith's shop. For more information or to place your order, please request a quote today. Itjdpfx Aheuyh Sgs Uor

Condition: used, Year of construction: 1989, - pneumatic - Max. operating pressure (bar): 8 - weight max. (kg): 80 - enclosed tools: included (see photos) Iedpfx Ahjlkdy Eo Uotr

Year of construction: 1972, condition: used, Meyer press with 45 tonnes of force Itodpfx Ahoxa D Tlj Ujr

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Isdpfx Aex Ehmyeh Ustr

Condition: used, Year of construction: 1978, pressing force: 250 t, lifting height: 61 mm, SLIDE .. total force (nominal): 250 to .. stroke: 61 mm .. stroke rate (max.): 60 /min .. stroke rate (min.): 15 /min COUNTER RAM .. nominal force: 75 to V-RING .. nominal force: 75 to TOOL DIMENSIONS Itjdpox Hd Tuofx Ah Uer .. lower table (left-right): 540 mm .. lower table (front-back): 540 mm .. upper table (left-right): 540 mm .. upper table (front-back): 540 mm STRIP-FEEDER .. sheet width max.: 250 mm .. sheet thickness max.: 10 mm .. sheet length min: 1500 mm DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3150 mm .. space requirements -front/back-: 2120 mm .. total height: 3000 mm .. total weight approx.: 14000 kg Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: 160 - 305 mm Fixed: 175 - 320 mm Vertical adjustability of the upper clamping plate: Movable: 145 mm Fixed: 145 mm Fine blanking table: Max. hydraulic stroke both movable and fixed: 15 mm Max. counterholder stroke in head, movable and fixed: 13 mm T-slots in the clamping plates for movable M16, fixed M16 Movable and fixed table travel: 6 mm

Condition: like new (used), Year of construction: 2022, Manufacturer: ROVETTA / AIDA Model: DFS-TE4-20000(2) 730-250 Press force: 2,000 tons Drive: SERVO Stroke: 800 mm Stroke rate: 50 rpm Ram adjustment: 400 mm Side opening: 3,650 mm Ijdpox Idxmjfx Ah Ustr Bolster area: 7,300 x 2,500 mm Ram area: 7,300 x 2,500 mm NORDA Transfer Transfer pitch: 0-1,250 mm Transfer opening min./max.: 700 - 2,740 mm Transfer stroke: 0-350 mm Millutensil coil line Material thickness: 0.5 – 3.0 mm Material width: max. 1,800 mm Decoiler load capacity: 20 tons

Condition: new, The KNWP 15 M is a reliable manual hydraulic workshop press designed for versatile applications within the Workshop Presses category and specifically under Manual Workshop Presses group. Engineered in Europe, this robust machine is ideal for general assembly, straightening tasks, and workpiece testing, ensuring professional usability in mechanical workshops, garages, and locksmiths. The KNWP 15 M supports a pressure force of 15 tons and features a total piston stroke of 160 mm, enabling efficient removal and installation of press-fit bearings, as well as straightening beams and shafts. Equipped with both hand and foot control, this press includes a rigid machine frame and an adjustable-height support table, making it easy to handle. You will appreciate the versatility of its multi-function die for straightening various materials. For your needs in power and precision, you can easily order online or request a quote. Experience the quality and utility that the KNWP 15 M offers today in the Workshop Presses category and Manual Workshop Press group. Ijdpfx Ahsncdu Ne Uetr

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: H80 997, overall weight: 980 kg, - Year of manufacture: 1980 - Fully functional, connected to power, ready for demonstration - Pressing force: 100 kN - Throat depth: 170 mm - Straightening stroke: 60 mm - Table area: 1300 mm + 2x 50 mm x 260 mm - Table height above floor: 935 mm - Max. oil pressure: 200 bar - Hydraulic oil capacity: 70 l - Motor power: 1.5 kW - Drive power: 2.2 kW - Weight: 980 kg - Machine No.: H80 997 Itjdpfx Ahexnkazo Uor

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Total stroke 56 mm Iodpfx Aow A Srweh Uotr Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: repair required (used), Year of construction: 1972, functionality: limited functionality, machine/vehicle number: 611, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Itedpfx Ahsx Ehlco Uor

Condition: refurbished (used), Year of construction: 2007, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 210-026, total height: 3,900 mm, total width: 1,800 mm, total length: 3,200 mm, pressing force: 250 t, table width: 1,200 mm, table length: 800 mm, After retrofit / complete overhaul in 2023, the machine was only used for small test runs. Control system is completely new. Isdpex Auwasfx Ah Ustr

Condition: excellent (used), Year of construction: 2008, Manufacturer: ROVETTA / AIDA Model: S4-20000 5500-2500-LD Press Force: 2,000 tons Stroke: 700 mm Strokes per minute: 8–24 1/min Ram Adjustment: 600 mm Side Opening: 3,100 x 2,700 mm Table Surface: 5,500 x 2,480 mm Ram Surface: 5,500 x 2,480 mm Height of Sliding Table: 600 mm Drawing Cushion: 1 unit Drawing Cushion Force: 1,500 kN Dimensions of Drawing Cushion: 850 x 1,260 mm Drawing Cushion Working Stroke: 250 mm NORDA Transfer Transfer Step: 0–1,250 mm Transfer Opening min. / max.: 1,000 – 2,500 mm Transfer Stroke: 0–280 mm Itedpjx Idt Defx Ah Uor Millutensil Coil Line Material Thickness: 0.6 – 2.0 mm Maximum Material Width: 1,600 mm Decoiler Capacity: 15 tons

Condition: new, The KNWP H 100 is a robust Motorized Workshop Press, part of the Workshop Presses category by KNUTH. This hydraulic workshop press features a torsionally rigid welded gantry-style frame, making it ideally suited for professional use in technical workshops and maintenance departments. Its stable portal design includes an adjustable open support table that allows for versatile applications, such as pressing in and out bearings, assembly work, and testing workpieces. The press boasts a finely adjustable press force of up to 100 tons and a long piston stroke of 400 mm, ensuring efficiency and adaptability for various tasks. Operators can monitor the current working pressure via the built-in gauge, while the horizontal adjustment of the working cylinder simplifies setup without needing to reposition the workpiece. To enhance reliability, the KNWP H 100 is equipped with premium components and includes a motorized hydraulic drive, movable working cylinder, and height-adjustable work table. For anyone seeking a dependable Motorized Workshop Press, the KNWP H 100 is an excellent choice—request a quote today to add this essential tool to your lineup. Iodpfjuyh A Eex Ah Uotr

Condition: new, Year of construction: 2025, functionality: fully functional, 125 T C-Frame Servo Press with 50 T Ejector, DUPLOMATIC Hydraulics Reduced power consumption by up to 40% compared to conventional motors, thanks to servo-hydraulics. TECHNICAL DATA: - Press capacity: 20–125 T (adjustable) - Maximum installation height: 1000 mm - Usable table surface: 2200 x 750 mm - Usable ram surface: 980 x 750 mm - Ejector cylinder capacity: 50 T - Ejector cylinder stroke: 200 mm - Frame type: C-frame - Guide column diameter: Ø 100 mm (4 pieces, in corners) - Table height from floor: 870 mm - Overall dimensions approx. (W x D x H): 2400 x 2000 x 3300 mm - Approx. total weight: 8,700 kg - Clamping device for die centering: 50 mm diameter - Prepared for vibration dampening plates: 30 mm - Prepared for ROBO connection: yes HYDRAULIC CYLINDER: - Piston stroke: 0–700 mm (adjustable) - Max. operating pressure: 245 bar - Return speed: 300 mm/sec - Ram speed under load up to 25%: 25 mm/sec - Ram speed under load up to 50%: 14 mm/sec - Ram speed under load up to 80%: 7 mm/sec - Ram speed under load up to 100%: 6 mm/sec - Idle speed: 300 mm/sec HYDRAULIC POWER UNIT: Itedpfx Aox Aqtqsh Uor - SERVO hydraulic pump (brand: DUPLOMATIC): 143 L/min (1 piece) - SERVO motor power: 15 kW (1 piece) - Pressure accuracy during pressing stroke: +/- 5 bar - Pre-fill valve: NG-160

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. Iedpfopfcx Isx Ah Ujtr with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 195 kg type: 9524-640-826-7 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic press with adjustable capacity from 3 to 20 tons, regulated via rotary dial a) Robust machine frame Itjdpfx Ahsx Ap Ute Usr b) Control cabinet technology from renowned manufacturers c) Pump by German manufacturer Agro-Hytos or equivalent supplier d) Press table dimensions: 1000x400x40 mm e) Table height: 940 mm from factory floor f) Ram size: round, 250 mm diameter, replaceable g) Emergency stop switch h) Maximum distance between table plate and ram: 500 mm i) Cylinder stroke: 500 mm j) Motor power: 2.2 kW k) Oil tank for 60 L hydraulic oil l) Downward travel speed 2-10 mm/s (adjustable via rotary dial), upward 20 mm/s m) Total weight approx. 1200 kg n) Coating: RAL 7035 (Light Grey) and RAL 2009 (Orange) o) Assembly, commissioning, and instruction available at extra charge p) CE declaration and German-language documentation

Condition: excellent (used), Here we offer you a control unit. Control unit for RIVSET self-pierce riveting system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Itsdpspgul Ejfx Ah Ujr Type: 6039402 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Technical specifications Tonnage: 300 T Clear span between uprights: 2,100 mm Stroke of cylinder: 600 mm Maximum distance between heating plates: 800 mm Heating plate dimensions: 1,800 x 1,100 mm Table height from floor, incl. damping plates and heating plate: 800 mm Overall height approx.: 3,600 mm Width approx.: 3,800 mm Depth approx.: 1,870 mm Weight approx.: 22,000 kg Hydraulic power unit by BOSCHREXROTH Hydraulic pump by BOSCHREXROTH: 105 L/min 22 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Return speed: 150 mm/sec Alternative: Hydraulic power unit by DUPLOMATIC Hydraulic pump DAIKIN HYBRID-SERVO: 130 L/min 15 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Iodpfx Asx Ap Itsh Ujtr Return speed: 150 mm/sec Two-hand control Ram return by pressing the blue button Stroke limitation via Leuze measuring rod and monitor Fixed lower table with T-slots (X-direction): 2,100 x 1,100 mm Ram with T-slots (X-direction), size: 1,900 x 1,100 mm CE certificate and user manual: Included in delivery

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Itsdpfshhil Tex Ah Uor Further questions we can answer on the phone for you.