Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min Iaodpfovuulljx Abvsp impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck video at seller's site before dismantling available

Condition: used, Year of construction: 1996, pressure 250 t distance between columns 2100 mm Iajdovuuidepfx Abvsp stroke 300 mm Distance table/ram, stroke up 850 mm Table surface area 2000 x 1300 mm Table height above floor 900 mm Side window 1300 mm Ram surface 2000 x 1300 mm Oil volume 1300 l Power capacity 60,0 kW Weight 39,5 t Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2006, pressure 250 t Iaodpfsvuuhasx Abvjp distance between columns 3000 mm stroke 600 mm Distance table/ram, stroke up 900 mm Table surface area 2500 x 1300 mm Table height above floor 1050 mm Side window 1350 mm Ram surface 2500 x 1300 mm Speed down 500 mm/s Speed up 400 mm/s Working speed 36 - 64 mm/s Oil volume 2700 l Power capacity 137,0 kW Weight 54,0 t Dimensions (WxDxH) 4,1 x 4,55 x 6,15 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm Iaodpfx Ajvuufxjbvep oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, Hydraulic 500 T Gantry Straightening Press with tool clamping device and parallel support for the bending blade a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 44 mm/sec c) Table size 2000 x 850 mm d) Open height 1500 mm Iedpfx Aowgakvebveap e) Overall size approx. LWH 1500 x 3000 x 4300 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table with grid design i) Remote control j) Pressure adjustment from 80 T to 500 T via rotary dial k) Table moves hydraulically outward 700 mm for loading l) Cylinder moves left and right via racks m) Machine body powder-coated or double-coated n) T-slots according to customer requirements o) Cylinder induction-hardened p) Assembly, commissioning, and instruction are charged separately. Press type: GANTRY PRESS Thermally neutral 80 – 120 °C Number of operating sides: 3 Forces Max. press force: 5,000 kN Max. free tear-off force: 800 kN Pressure build-up time: Closed tool, steel on steel: Max. 3 seconds Dimensions Max. opening width: 1,500 mm Stroke and min. opening: 1,300 mm/200 mm Table height above floor: approx. 850 mm Height above floor (overhead height): approx. 4,300 mm Hall height: min. 5,000 mm Deflection Determined at max. closing force with 70% occupancy: < = 1.2 mm/m Weight Total weight of the press without operating materials and table top: approx. 25 t Speeds Quick closing with 17 mm sec. Pressing speed at F max.

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Ijdehtm E Nepfx Abvsap Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. Isdpfx Abjfxygwjvjap The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive as is where is, WITHOUT putting into operation Iasdpfjvuk N Tox Abvep

Condition: used, Year of construction: 1986, total height: 2,900 mm, total width: 1,450 mm, total length: 1,500 mm, Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 Iajdjylb Edopfx Abvep - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Iajdpfxsf Sqcke Abvsp

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200 Ijdjfhcc Hopfx Abvsap

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressing force: 110 t, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE Ijdedxrqwopfx Abvjap

Condition: used, Year of construction: 1966, pressure 10 t table surface area 1.800 x 205 mm ram stroke 150 mm ram head width 50 mm throat 150 mm Iaodpfx Ajymp R Robvjp quantity of oil 75 l connected load 380 V / 50 Hz dimensions of the machine ca. 2,0 x 1,0 x 2,10 m Straightening Press EITEL - RP 10

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many Iajdpfx Aboymf Nvevjp many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 20 t stroke max. 200 mm Iajdpfxeymf Ils Abvsp bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Year of construction: 1985, condition: ready for operation (used), Press force: 100t, stroke rate: 60/min, ram stroke: 8mm-137mm, ram adjustment: 80mm, throat depth: 375mm, table dimensions X/Y/Z: 800mm/630mm, machine dimensions X/Y/Z: approx. 1500mm/2400mm/3500mm, weight: approx. 8800kg. An on-site inspection is possible. Iedpsyu T Dqsfx Abveap

Year of construction: 1978, condition: ready for operation (used), Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible. Iaedpfx Aeyu T Dwjbvep

Condition: used, Year of construction: 1989, pressure 20 t Iaedpsvr Hkzsfx Abvop total power requirement 20 kW weight of the machine ca. 5 t

Condition: good (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 64511, stroke length: 500 mm, pressing force: 100 t, Very rarely used test press for running in new tools. Machine works perfectly Iedpfx Ajm Rgh Tjbveap Pressing force: 100 tons Distance table - punch: 500 mm Table size 1100 x 800 mm Weight: approx. 7 tons Dimensions: 2300x1100x3000 mm (LWH) Hydraulic unit: 1200x1200x1600 mm (LWH) Free loading

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 135 t, It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T 200 L tank Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control system PILZ Iajdpfxsigg E Ho Abvsp Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Iasdogrki Sspfx Abvjp Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: new, Year of construction: 2018, pressing force: 200 t, machine/vehicle number: DF0230, pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm Isdpfx Absfxyklovoap table speeds:30 mm/sec

Condition: new, machine/vehicle number: DF0177, pressing force: 315 t, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm power capacity:25 kW work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l :entfällt ? Iajdpfx Ajfxyhiobvsp :entfällt ? :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ?

Condition: used, Year of construction: 1998, For sale is a used spotting press from manufacturer Reis, featuring an adjustable pressing force of up to 100 tons. This 4-column press offers a table size of 1600 × 1300 mm, a maximum open height of 950 mm, and is equipped with an ejector in the table, making it particularly suitable for spotting, adjustment, and toolmaking work in mold and die construction. ##### Technical Data & Information: Spotting Press – REIS TUS 80-100 #### General Specifications - Designation: Spotting Press - Manufacturer: REIS - Type: TUS 80-100 - Design: 4-column press - Year of manufacture: 1998 - Pressing force: 26–100 tons (adjustable) - Maximum return force: 45 tons - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Max. open height: 950 mm - Overall dimensions (W x D x H): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm #### Hydraulic System - Hydraulic pump: Rexroth SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Max. operating pressure: 200 bar - Pressure accuracy: ±5 bar - Tank oil volume: 215 L Iaodpfxexd Tiqe Abvop - Hydraulic oil: HLP 36 #### Features / Equipment - 180° tiltable ram plate (up to 3 t) - Table ejector (3.5 t / 130 mm) - Oil coupling sockets for core pullers - Digital measuring system - Material feed through ram plate possible (injection molding) - Speed increase #### Control System - Operator panel - Control system: Siemens / Pilz - Functions: - Ram up / down - Tilt ram plate - Extend table - Operate ejector - Adjust pressing force - Control core pull / oil couplings #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 7.5 kW - Total connected load: approx. 10 kW (spotting press, tryout press, tool adjustment press, toolmaking press, 4-column press, hydraulic press, REIS press, toolmaking spotting press)

Condition: used, pressure 100 t stroke 300 mm Cylinder 205 mm distance between table / ram 520 mm table surface area 1100X350 mm ram surface 350X350 mm total power requirement 7,5 kW with roller conveyor, 1: Roller conveyor: 2000x500 inlet Ijdeyutqwspfx Abvjap 1: Roller conveyor: 2000x500 outlet The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team