Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Ram stroke 12 mm Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm Duob Hsv Srfkjk Niuot - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Very good condition

Condition: ready for operation (used), Year of construction: 1959, Functionality: fully functional, Hydraulic single-column press SMG HOP 25 / C 100 Year of construction 1959 Pressure 100 t Stroke 500 mm Projection 345 mm Installation height 400 mm Table surface 800 x 680 mm Plunger 600 x 600 mm Table height above floor 850 mm Max. Retraction force 80 kN Oil capacity 560 l Dob Hk Nisv U T D Teujut Drive power 22.0 kW Machine dimensions LxWxH 2000 x 1200 x 2980mm Weight 8.3 tons

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, total height: 3,550 mm, total width: 2,260 mm, pressing force: 80 t, table width: 2,100 mm, table length: 840 mm, table height above floor: 1,200 mm, overall weight: 12,000 kg, EXNER PG 80 Tool Test Press Year of manufacture: 2015 Number of press cylinders: 2 Nominal force (adjustable) 2 x 400 kN Retraction force 2 x 150 kN Ram stroke 350 mm Ram width: 2100 mm Ram depth: 840 mm Installation height: 550 mm Table width: 2100 mm Table depth: 840 mm Table clearance 1300 x 125 mm Front column clearance 1700 mm Side column clearance 600 mm Table height above floor 1200 mm Ram speed at load up to 100% approx. 0-10 mm/s Ram return speed approx. 0-20 mm/s Deb Hk Nov U T R Toiujut - Electronic roller feed unit EV 22 AK included Belt width: max. 220 mm Belt cross-section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: max. 120 m/min Roller opening: max. 4 mm Accuracy: +/- 0.05 mm Roller diameter: 38.2 mm The system is equipped with a Zehnder Sommer feeder. This is mounted on the left side and can be moved backwards from the side area. Appropriate safety devices for automatic continuous operation are provided.

Condition: used, Year of construction: 1969, table width: 2,200 mm, table length: 4,000 mm, pressing force: 100 t, power: 30 kW (40.79 HP), lifting height: 1,500 mm, worktable length: 4,000 mm, ram stroke: 1,500 mm, year of last overhaul: 2011, CONTROLS .. conventional PRESS DESIGN .. drive system: hydraulic Dujb Hswavw Ssk Niust PRESS FORCES .. total force (nominal): 100 to PRESS TABLE .. table surface (left-right): 4000 mm .. table surface (front-back): 2200 mm SLIDE .. table surface (left-right): 4000 mm .. table surface (front-back): 2200 mm .. stroke: 1500 mm SLIDE (HYDR. PRESS) .. working velocity min.: 0.025 mm/s ELECTRICAL SPECIFICATIONS .. total power consumption: 30 kW ATTACHMENTS (PRESSES) .. moving bolster design: front

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 10 h, Functionality: fully functional, CrimpOne C1-140B - Battery-Powered Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Duob Hk Niev Tladouot Max. hose size: 1 1/4 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 1.6 kW Power supply: 12 V (DC) Crimps per hour: 250 pcs Length: 460 mm Width: 280 mm Height: 370 mm Weight: 85 kg Noise level: 71 dB(A) In stock, available immediately!

Condition: refurbished (used), Year of construction: 1999, operating hours: 2,600 h, Functionality: fully functional, total width: 2,200 mm, total length: 1,100 mm, total height: 3,400 mm, overall weight: 17,000 kg, operating pressure: 200 bar, construction height: 3,400 mm, clamping force: 5,500 kN, table length: 850 mm, table width: 1,100 mm, working height: 800 mm, Hydraulic press, generally overhualed hydraulic and electric, 550 T closing pressure, 2 closing speeds: Rapid and working speed Single piston 850*1100 table with T slots Max opening 800 mm Siemens PLC automation with installed Temp. controllers. Debjuy Rczs Hk Niueut Possible usage in rubber vulcanization, duroplast pressing, metal forming etc.

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Dob Hksv Srfde Niuout Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: new, Year of construction: 2025, total height: 5,150 mm, ram adjustment: 200 mm, installation height: 750 mm, total width: 2,600 mm, total length: 4,000 mm, table length: 2,500 mm, table width: 1,300 mm, conveyor belt width: 430 mm, pressing force: 315 t, ram stroke: 300 mm, table height above floor: 1,117 mm, distance between side stands: 850 mm, distance between stands: 2,580 mm, overall weight: 54,000 kg, control voltage: 24 V, Standardized 315-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. Dujb Hk Niswc A Ebeust For technical specifications, see PDF document. Delivery time: 6 months

Condition: refurbished (used), Functionality: fully functional, Mechanical roller feed BBV202/120 for attachment to BSTA60 Left-hand attachment Djb Hjr Hmnmjk Niueut Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle No encoder attachment available

Condition: used, Year of construction: 1987, installation height: 410 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, pressing force: 630 t, controller manufacturer: CYBELEC, controller model: 7200 PD, load capacity: 4,600 kg, coil weight: 4,600 kg, coil width: 300 mm, material thickness: 16 mm, material width: 300 mm, number of straightening rollers: 8, table length: 910 mm, tool height: 410 mm, CONTROLS .. PLC CYBELEC 7200 PD SLIDE .. total force (nominal): 630 to SLIDE (HYDR. PRESS) .. approximation velocity max.: 120 mm/s COUNTER RAM .. nominal force: 180 to V-RING .. nominal force: 320 to TOOL DIMENSIONS .. lower table (left-right): 910 mm .. lower table (front-back): 1350 mm .. upper table (left-right): 900 mm .. upper table (front-back): 900 mm .. shut height max.: 410 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 300 mm .. sheet thickness max.: 16 mm .. coil weight max.: 4.6 to DECOILER .. design: cradle .. sheet width max.: 300 mm .. sheet width (min): 50 mm LEVELLER UNIT .. sheet width max.: 300 mm .. sheet width (min): 50 mm .. sheet thickness max.: 4 mm .. sheet thickness min.: 16 mm .. number of leveller rolls: 8 STRIP-FEEDER .. feeder type: grip feeder ATTACHMENTS -FINEBLANKING PRESS- Duob Hk Nev Divqsiust .. closed cabin: yes .. decoiler: yes .. leveller unit: yes .. waste cutter: yes .. slug separator: yes Coil line SCHLEICHER AK-RMS8-98/180-300 new in 1994

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: C1-140_1, CrimpOne C1-140 Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Duob Hk Niov Tk T Njuot Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock!

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm Dueb Hk Nievzxttsuot power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Year of construction: 2003, Condition: good (used), Briquetting press for metallic waste, chips, dust Djb Hksfb T Eye Niueut Plant as new , used only for trial purposes

Year of construction: 1978, Condition: ready for operation (used), Pressing force: 3150kN, table dimensions: 1250x1100mm, table height: 750mm. Fully functional, last internal inspection: Q1/2025, UVV on Q2/2024. On-site inspection is possible. Duebewb E R Rj Hk Niust

Condition: refurbished (used), Functionality: fully functional, Mechanical roller feed BBV202/120 for attachment to BSTA25 or BSTA50 Left-hand attachment Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Dujb Hksr Hmpce Niujt Mechanical feed length adjustment via spindle PTO shaft protection system tube Including encoder attachment

Condition: excellent (used), Year of construction: 1950, . Crack tested ; mechanical condition = very good ! . Type XRR 150 III sp Dueb Hjv Uqhiok Niujt Delivered 1956 --> --> Table size 1150 x 1000 mm throat 500 mm --> --> ram size 1150 x 800 mm - Weight approx. 13 tons . VIDEO`S included in the offer . ..... Ongoing purchase of used German machines without NC or CNC control .

Year of construction: 2003, Condition: ready for operation (used), Control Unit Brand SIEMENS Model SIMATIC OP7 Dujbewhguqo Hk Niuot This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information. Application Types Stamping

Condition: good (used), CN 2260 HYDRAULIC SYNCHRO PRESS BRAKE Force 2200KN Bending length 6120mm Deb Hk Neugr R Dsiuout Distance between uprights 5100mm Slide table distance 525mm - Gooseneck depth 400mm - Stroke 275mm Electric motor power 18.5kw (10mm² section, 380V 50amp fuse disconnector) Overall dimensions 6240 x 2340 x 3425mm - Weight 25000kg

Year of construction: 1963, Condition: good (used), 3 eccentric presses make WMW 1 x crank press with one ram 16 T 1 x crank press with one ram 25 T Dob Hk Njmi Rpijiuout

Year of construction: 1969, Condition: ready for operation (used), Press force cutting and drawing ram: 1000kN, table dimensions: 710x560mm, thickness of clamping plate: 90mm. Fully functional, last internal inspection: Q1/2025, UVV on Q2/2024. On-site inspection is possible. Duob Hkjwb E R Ds Niuot

Condition: refurbished (used), Functionality: fully functional, Mechanical roller feed BBV202/120 for attachment to BSTA80/110/125 Left-hand attachment Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle PTO shaft protection system tube Including encoder attachment Duob Hk Nior D Rfxjust

Condition: used, Single-column eccentric press HELMERDING Type TPEP 12 B Mach. No. 831-101, Order No. 76228, Year of manufacture 1976 Pressing force 12 tons Debev N N Hms Hk Niueut Thrust 155 mm Table surface 400 x 320 mm Table opening Ø 125 mm Ram surface 125 x 100 mm Stroke adjustment 6-60 mm Ram adjustment range 40 mm Clamping pin bore Ø 25 mm with clamping piece Max. installation height 250 mm Stroke rate 180 strokes/min. Drive power 1.1 kW - Electric foot switch and two-hand operation - Set-up, single-stroke two-hand operation, single-stroke foot operation and continuous operation with foot operation, automatic continuous operation - Emergency stop - Pneumatic clutch-brake combination with auxiliary brake ORTLINGHAUS - Electrical cabinet adjacent L x W x H: 600 x 430 x 1000 mm - UVV 11.062 VGB 7.n.5.2 (for manual insertion work) - Operating instructions with electrical diagram Space requirement L x W x H 1250 x 800 x 1800 mm Weight 800 kg Good condition

Condition: new, Year of construction: 2021, Design Single column press Number of operating sides 1 side Forces Pressing force max. ( at 250 bar ) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool steel on steel Max. 2 sec. Dimensions Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1850 mm Hall height min. 2.500 mm Total weight of the press without operating materials approx. 1.2 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Dujb Hkshaqyge Niuet Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Additional information Single column press with 10 T capacity, suitable for continuous shift operation CE certificate Manufactured according to EU standards Operating instructions, technical documents, documentation in German language Robust machine body with solid welded construction, manufactured according to DIN 8651 Low maintenance and reliable Cylinder with induction hardening and chrome cladding Traversing speed 0 - 10 mm/sec. downwards, Opening speed up to 25 mm/sec Starting pressing speed 10 mm/sec, adjustable from 0 to 10 mm/sec. Table size [...]

Condition: good (used), Year of construction: 2000, Stroke 800 mm Pressing force ? 50 mm piston rod Dusb Hksr Ai Sbo Niuet Total height 2.7 m Can also be used as a mold press

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, total height: 2,400 mm, total width: 1,500 mm, total length: 2,400 mm, pressing force: 20 t, overall weight: 2,000 kg, type of input current: three-phase, control cabinet width: 80 mm, input voltage: 400 V, control cabinet length: 60 mm, power: 22 kW (29.91 HP), input current: 32 A, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, height adjustment type: hydraulic, motor voltage: 400 V, type of motor: three-phase motor, Equipment: documentation/manual, If the press does not exactly match your requirements profile, please click here to request a customized offer tailored to your needs: Contact us for a customized quote HIDROBRASIL manufactures presses to your exact specifications at surprisingly competitive prices! ##### 20 T tablet press, single column press, C-press, manual insertion press Machine type: Hydraulic single-column press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical specifications: - Pressing force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20 °C - Deflection: 0.3 mm/m (at max. clamping force with 70 % occupancy) - Total weight: approx. 2 tons - Travel speeds: Fast closing 120 mm/s, pressing speed 10 - 5 mm/s - Sound pressure level: max. 78 dB(A) measured at a height of 15 m at the control panel in accordance with DIN 45635-T16-KL3 - Hydraulics: - Number of pressing cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during the pressing stroke: +/- 5 bar - Main pump: Gear pump approx. 10 l/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Electrical system: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection: approx. 6 kW - Switch cabinet: - Protection class: IP 54 - Reserve space: approx. 20% - Cooling: no - Interior lighting: no - Operating mode switch: lockable Features: - Light barrier: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors - Pressure setting: 5 T to 20 T, adjustable via rotary control - Two-hand operation: standard, optional foot operation available - Table top: as a tray with 50 mm high edge and side drain - Control cabinet: on the right of the press, IP 54 protection class Function and operation: - Activation: via main switch - Pressure setting: via rotary control - Cycle activation: via two-hand operation or optional foot pedal - Safety features: in accordance with EU standards and UVV regulations Special features: - Crimping tool components: Upper tool with 8 pressing pistons, 3-part lower tool - Pressing cycle: can produce 8-12 pressed parts per minute - Hydraulic unit: can be completely dismantled for maintenance work Service and warranty: - Monitoring and testing: in accordance with DIN ISO 16092-3-2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: in accordance with CE standards Deb Hkstv Ewdo Niujut --- Are you looking for a customized machine? Contact us for a customized offer.