Condition: new, pressing force: 80 t, cylinder stroke: 400 mm, - Capacity 80 tons Febvnsu Dg Egek Thjgb - Cylinder stroke 400 mm - Working width 900 mm - Cylinder can be moved to the left and right - Electrically or manually operated - pressure gauge - Emergency stop - 400V

Condition: used, Year of construction: 1978, pressure 63 t throat 280 mm stroke 160 mm table surface area 560 x 500 mm ram surface 280 x 280 mm dayligth 400 mm Fjbvnk Tshbalnshsgb oil volume ca. 360 l total power requirement 22 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,45 x 1,75 x 2,67 m - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder

Condition: used, Year of construction: 1971, pressure 16 t Stroke 180 mm table surface area 400 x 290 mm Fgobvnkovdx Hxj Theb

Year of construction: 1989, Condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Fgjbvnk Tsvyirkjhjb

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: STHP 80KN, total height: 1,320 mm, total width: 510 mm, total length: 200 mm, pressing force: 8 t, table width: 300 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders. Febvst Rhb Isnk Thjgb

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 7551051722-E, total height: 3,100 mm, overall weight: 16,000 kg, total width: 4,550 mm, working width: 3,050 mm, total length: 2,400 mm, pressing force: 300 t, Machine was not used much Fsbvov Uyulsnk Thogb

Condition: new, pressing force: 60 t, cylinder stroke: 400 mm, - Capacity 60 tons - Cylinder stroke 400 mm - Working width 900 mm - Cylinder can be moved to the left and right - Electrically or manually operated - pressure gauge - Emergency stop - 400V Fobvnju Dch Rsk Thogb

Condition: used, Manzoni 40 Ton high speed press 150/300 strokes Used - bargain Febvnk Tekn Hk Tehsgb

Condition: new, Year of construction: 2025, Functionality: fully functional, drop-through hole in table: 150 mm, table width: 700 mm, table length: 450 mm, overall weight: 2,750 kg, pressing force: 40 t, Eccentric press C - frame 40 ton. = 400 kN NEW machine Pressing force 40 ton. NOMINAL LOAD CAPACITY POINT 3 mm MAX. HEIGHT OF CLOSED DIE 275 mm STROKE ADJUSTMENT (SEMI-AUTOMATIC) 5/70 mm Speed 130 SPM Diameter of die mounting hole 50 mm Fjbvjvphq Dsnk Thsgb Throat depth (hole center to the back) 220 mm Ram adjustment STROKE 70 mm RAM DIMENSIONS 460 x 310 mm Table dim. 700 x 450 mm DIAMETER OF THE TABLE HOLE 150 mm TABLE HEIGHT FROM THE FLOOR 745 mm Weight approx. 2,750 kg Height 2175 mm Depth 1155 mm Width 1150 mm MOTOR POWER 3 KW

Year of construction: 1981, Condition: ready for operation (used), Press force: 600kN, accuracy: 0.1mm, stroke rate: 300 strokes/min, feed: 150mm, clamping plate dimensions X/Y: 650mm/420mm, opening dimensions X/Y: 550mm/120mm, tool installation height min./max.: 190mm/350mm, weight: approx. 8000kg. Without coil and straightening unit. In continuous operation, the machine switches off after 1-2 strokes. Documentation available. On-site inspection is possible. Febvsvyip Nsnk Thsgb

Condition: used, Year of construction: 1963, pressure 80 t throat 280 mm stroke 10 - 140 mm Fobvnovki H Ask Thegb no. of strokes 65 Hub/min distance table/ram, max. stroke up, adjustment up 270 mm table surface area 840 x 560 mm hole in the table 195 mm ram surface 750 x 250 mm ram adjustment 60 mm total power requirement 4,0 HP weight of the machine ca. 4,2 t dimensions of the machine ca. 1,6 x 1,2 x 2,4 m with motor, back gears, wheel-guard, air-friction clutch, safety device in TDC and secure control according to the German Safety Regulations for manual put-in (UVV), mech. overload protection in slide, autom. centralized lubrication, fixed bed, two-hand operation, control cabinet

Condition: new, pressing force: 100 t, cylinder stroke: 400 mm, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder can be moved to the left and right Fobvnk Touynpxjhjgb - Electrically or manually operated - pressure gauge - Emergency stop - 400V

Year of construction: 1992, Condition: ready for operation (used), Max. pressing force: 4000kN, max. stroke: 500mm, installation height: 1100mm, table dimensions: 1200x800mm, max. working pressure: 300bar, weight: 23t, with documentation, was maintained regularly, an on-site inspection is possible. Fsborbl Amsvnk Thegb

Condition: new, AYEL-TECH WORKSHOP PRESS TYPE WP 100 - Capacity 100 tons - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder is moveable - Electric or manual operation - Pressure gauge - Emergency stop - 400V CALL FOR MORE INFO DUTCHMACH Fsbvnksgg Nq Ue Thogb Metalworking machines ENSCHEDE

Condition: ready for operation (used), Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024. Febvnkor I Abij Thegb

Condition: new, pressing force: 60 t, cylinder stroke: 400 mm, AYEL-TECH WORKSHOP PRESS TYPE WP 60 - Capacity 60 tons - Cylinder stroke 400 mm - Working width 1000 mm - Cylinder is moveable - Electric or manual operation - Pressure gauge - Emergency stop - 400V CALL FOR MORE INFO Fgobvnegg Nq Rok Thob DUTCHMACH Metalworking machines ENSCHEDE

Year of construction: 1992, Condition: ready for operation (used), Compressive force: 1000kN/100t, lifting speed: 25/min, ram stroke: 230mm, power requirement: 5.5kW, safety distance: 640mm, stopping time: 400ms, weight: 4600kg. Has been overhauled once. Fobvnk Tstk Nx Ejhegb

Year of construction: 1992, Condition: ready for operation (used), A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible. Fgobvnk Tjvdu Nveheb

Year of construction: 1992, Condition: ready for operation (used), Press force: 1000kN, rapid traverse force: 100kN, retraction force: 100kN, overrun time: 0.053s, power: 18.5kW, table dimensions X/Y: approx. 1000mm/800mm, clearance: 600mm, max. stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. Stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. 1800mm/2200mm/3700mm, control panel dimensions X/Y/Z: approx. 800mm/800mm/1600mm, external control cabinet dimensions: approx. 1600mm/500mm/1200mm. Without feed unit. On-site inspection is possible. Fgsbvnkovriqde Thjb

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Fgjbjr A Eifsvnk Theb

Year of construction: 2018, Condition: ready for operation (used), A Mäder direct-acting compressed air press is available. Pressing force at 6bar: 56kN, max. stroke length: 80mm, compressed air input min./max.: 3.2bar-6bar, max. tool dimensions X/Y: 310mm/220mm, max. tool weight: 14kg, total stopping time: 0.1s. Projection of press head/press frame: 150mm/300mm, working height: 195mm-290mm, table dimensions X/Y: 190mm/190mm, operating hours: 59h. Pressure cell included. Documentation available. On-site inspection is possible. Fsbou St Idevnk Thjgb

Year of construction: 1971, Condition: ready for operation (used), Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg. Fobjtz Dldjvnk Thsgb

Year of construction: 1986, Condition: ready for operation (used), Press force: 315t, stroke: 600mm, table dimensions X/Y: 2000mm/1200mm, ram area X/Y: 2000mm/1200mm, rapid stroke: 450mm/s, working speed range: 14mm-40mm/s, retraction speed: 300mm/s, table height: 900mm, oil volume: 2000l. Dimensions X/Y/Z: approx. 5000mm/3200mm/5000mm, weight: approx. 45000kg. A retrofit was carried out in 2016. Documentation available. On-site inspection is possible. Available from October 2024. Febvet Hkiaonk Thegb

Condition: ready for operation (used), Year of construction: 2000, Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible. Fobvetqu Uxjnk Thegb

Year of construction: 1988, Condition: ready for operation (used), Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible. Febvnk Teu Nlk Eehegb