Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, High-precision lathe DMG Mori Wasino G 100/480 Year of manufacture: 2017 Control: Fanuc COMPACT line Temperature response (at cold start): ø 2.0 μm Roundness: 0.5 μm Technical specifications: Spindle speed: Drive power: Turning diameter: 285 mm Turning length: 280 mm Bar capacity: 38 mm Travel paths: X-axis: 480 mm Dobsvi Ifzs E Iitmscg Z-axis: 285 mm Accessories - 3 live tools - Rigid tool holder package - Fire extinguishing system - Machine has only been run under oil - Chip conveyor

Condition: used, Year of construction: 2012, turning diameter over bed 0500 mm turning diameter over slide rest 300 mm turning length 1500 mm centre height 245 mm centre distance 1500 mm spindle bore 72 mm speeds 20 - 2000 U/min feeds longitudinal slide 0,039 - mm/U weight of the machine ca. 3,0 t dimensions of the machine ca. 3 x 1,5 x 1,5 m Dob Ejv Ey N Ds Iitmjcg voltage 380 V connected load 7 kW Machine has a cover at back side, Multifix tool holder system, chuck, DRO, steady rest (has to be adjusted) and accessories.

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS Dcjb E Iisv I Tx Rstmsg CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS

Condition: used, Year of construction: 1996, operating hours: 23,960 h, Functionality: unexamined, machine/vehicle number: 1113-1833-23, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 63 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, rotational speed (min.): 4,500 rpm, total height: 2,125 mm, total length: 5,690 mm, total width: 2,900 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, tool mount: 40 mm, overall weight: 8,500 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The Boehringer VDF 180CM CNC lathe, built in 1996, is in very good and well-maintained condition, but has not been used in production for the past four years. The machine comes with extensive accessories (see photos) and can be inspected upon request at the AQUAtec Machining AG production site in the Industriepark, 6460 Altdorf, Switzerland. Dob E Iitewfgn Sjmocg

Condition: used, Functionality: fully functional, We offer the following 7 machines in a package: DMG Mori 2-axis universal lathe CTX 510 ecoline V3, built in 2014 DMG Mori 2-axis universal lathe CTX 510 eco V1, built in 2011 DMG 5-axis machining center ecoMill 70, built in 2015 DMG 3-axis vertical machining center DMC 1035 V, built in 2014 Ki-Heung CNC bed-type milling machine KNC-U1000, built in 2009 Ki-Heung CNC bed-type milling machine KNC-U1050, built in 2013 Ki-Heung CNC bed-type milling machine KNC-U1250, built in 2012 Dcob Eswgc Eve Iitmsg

Condition: used, Year of construction: 1992, serial number 31302 control Fanuc with double spindles x turning diameter max. 600 mm x-travel 1000 mm with magazine x extensive accessories ca. 100 Aufnahmen, auch angetrieben weight of the machine ca. 13 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Dcob Eohn T D Ie Iitmog +++++

Year of construction: 2015, Condition: ready for operation (used), Swing diameter over bed/slide/at the front door: 780mm/630mm/680mm, turning diameter: 406mm, turning length: 760mm, travel X/Z: 260mm/760mm, Y-axis: +/-50mm, speed: 4500rpm, spindle bore: 76mm, tool positions: 24, control: Siemens 828, documentation available. On-site inspection is possible. Dcjb Esv Uqcao Iitmjg

Condition: used, Year of construction: 2009, turning diameter over bed 0440 mm turning diameter over slide rest 230 mm turning length 1500 mm Dob E Iitjv Ey Nwjmecg centre height 210 mm centre distance 1500 mm spindle bore 62 mm speeds 20 - 2000 U/min feeds longitudinal slide 0,039 - mm/U weight of the machine ca. 2,1 t dimensions of the machine ca. 3 x 1,5 x 1,5 m voltage 380 V connected load 7 kW Machine has a cover for the chuck, cover at back side, Multifix tool holder system, chuck, DRO, steady rest and accessories.

Condition: used, Functionality: fully functional, Press brake with complete accessories. Dceb E Iitowgl I Tsmsg

Year of construction: 2004, Condition: ready for operation (used), Control Unit Brand SIEMENS Dceb E Iitswfilmsmsg Model 840D Powerline Media Chip conveyor Yes Additional Equipment Belt filter system: Coolant tank 980L with 20/40 bar This DMG Gildemeister Twin 65 horizontal turning machine was manufactured in 2004. It features a Siemens 840D Powerline control, a bar passage of 65mm, and dual sauter revolvers, each with 12x VDI 30. Additional highlights include a parts pick-up device, a belt filter system with a 980L coolant tank, and an IRCO Profimat 65 bar loading magazine. If you are looking to get high-quality turning capabilities, consider the DMG Gildemeister Twin 65 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2011, Manufacturer: DMG Gildemeister Type: CTX Beta 800 V4 Year of manufacture: 2011 Control: Heidenhain IT Swing diameter: 700 / Max. turning diameter: 410 / Cross travel: 300 Chuck diameter: 315 Spindle bore: ø76 Drive power 40%/100% duty cycle: 34 kW / 25 kW Speed range from-to: 5000 rpm Deb E Ijwgmh Ieitmjcg Approx. weight: 6100 kg Equipment: Axes: X, Z, C-axis + Y-axis Driven tools: Yes, 12 driven stations Tool carrier: Sauter 12-station VDI40 turret Tailstock: Yes Automatic quill stroke: Yes Quill mount: MK5 Chip conveyor: Yes - Oil mist extraction - Reinforced Coolant pump - Schunk Rota NCD 315-115 three-jaw chuck - Y-axis +/- 60 mm (120 mm) - 4 pallets with accessories: clamping jaws, tool holders, and driven tools - Driven tools: 4 radial, 6 axial Errors excepted

Condition: excellent (used), Functionality: fully functional, Specifications: Center width 2000 mm, Motor power 7.5 kW, Multifix C, Forkardt, two lynettes, digital display, Dsbewg A Spo E Iitmjcg

Condition: used, Year of construction: 2006, Control: MSX-850III Travel: X-260 mm, Z-1,345 mm; max. turning length: 1.298 mm turning diameter: 356 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Dcsbswg Egvj E Iitmog Rod diameter: 80 mm Rapid: 30 m/min Spindle speed: 4,000 rpm Spindle motor: 18.5/15 kW tool turret: 12 powered stations Drive power AGW: 5.5/3.7 kW Speed driven tools: 6,000 rpm programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws

Condition: used, Year of construction: 2019, operating hours: 15,551 h, Functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter Dcjb Eowgm Hkj Iitmjg in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: excellent (used), Year of construction: 2020, operating hours: 11,400 h, Functionality: fully functional, Technical Specifications: Max. workpiece diameter: 32 mm Max. workpiece length: 240 mm Main spindle: Max. speed range: 8,500 rpm Drive power: 7.5 / 5.5 kW Max. torque: 51.9 / 40.4 Nm Max. bar diameter: 32 mm Counter spindle: Max. speed range: 8,500 rpm Drive power: 3.7 / 2.2 kW Max. torque: 23.6 / 14 Nm Max. bar diameter: 32 mm Tool holder on slide 1: Fixed turning tools: 6-16 × 16 (8-12 × 12) Tools for front and back machining: 4-D.25 (5-D.20) Driven tools: 4-ER20 (6-ER16) Maximum Speed: 6,000-4,000 (6,000-3,815) rpm Power (S3 40% / S1): 1.9 / 1 kW Torque (S3 40% / S1): 3.5 / 3 - 5.25 / 4.5 Nm Tool holders on slide Y2: Fixed / driven tools for back machining: 4 / 0 Travel paths: Z1 travel (spindle stroke): 100 / 240 mm Tool holder 1: X1 / Y1 travel: 70 / 405 mm Counter spindle: X2 / Z2 travel: 300 / 200 mm Feed rates: Rapid traverse: (X1, Z1, X2, Z2) 40 / (Y1, Y2) 30 m/min Machine weight (incl. Coolant tank): 3.5 tons Operating hours: approx. 11,400 h Spindle hours: approx. 6,650 h Technical features: - Number of linear axes + c-axes: 6 + 2 pcs. - Number of spindles: 2 pcs. - Number of Channels: 2 pcs. - 28 tool positions on 2 independent linear holders - Up to 10 driven tools - Flushing for counter spindle collet - Conversion kit for short-turning to long-turning - Kit for emulsions - Preparation for oil mist extraction - DMG Mori Netservice client Accessories: - Internal coolant supply, 600 l tank - Hinged belt chip conveyor - Main spindle reducer tube - Bar loader, make IEMCA BOSS 338/32 HD - Transformer from 400 V to 200 V / 16 kVA - Signal lamp, 4-color Several machines are available. The technical specifications and equipment of the various machines may vary. Please contact us for specific information. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale! Dcsb E Iitowgynhomjg

Condition: ready for operation (used), Year of construction: 2016, Control Unit Model Matrix NeXUS 2 Brand MAZATROL Main Drive Spindle speed range 12000 Number of axis 6 Movement X-Axis Movement 450 mm Y-Axis Movement 200 mm Z-Axis Movement 1119 mm W-Axis Movement 1436 mm B-Axis Movement -30° to 220° Tools Slots in storage 20 Max weight 5 kg Max tool diameter 125 mm Max tool length 210mm Additional Equipment Tool magazine for 36 Capto tools (no tool holders included) Preparation for bar feed Automatic parts catcher (D:65 X L: 120 X2.5Kg) incl. ejector High pressure cooling 15 bar incl. simultaneous flood cooling 5 bar Preparation for chip conveyor Ejection side Preparation for Mazak Monitoring System B OMP60 (optical) This MAZAK INTEGREX J-200 S Lathe was manufactured in the year 2016 in Japan. It is equipped with a Mazatrol Matrix Nexus 2 control unit and has 6 axis. The machine has a spindle speed of 12000 rpm. See original purchase confirmation for more technical details as PDF (German) attached. Application Types Turning Dsb Eewfilte Iitmecg

Condition: excellent (used), Year of construction: 1975, Machine type: Lead and spindle lathe Manufacturer: MATRA Model: D10 Year of manufacture: 1975 Condition: very good Type of offer: used machine Technical data Center height: 200 / 220 mm Center width: 1600 mm Spindle bore: 52 mm Speed range: 26 - 2000 rpm Drive: 3.2 / 4.0 kW Remark: Dob E Ieu Dktzeitmjcg Forkardt 3-jaw wedge bar chuck Ø 200 mm with hard reversible jaws, additional 2 sets of base jaws with soft top jaws, Ideal quick-change holder with 5 inserts, coolant device, running center, drill chuck, keyless collet chuck with 26 collets Ø 2.0 - 31.0 mm, 20 square pliers 4.0 - 20 mm, 3 hexagon pliers 9-17-24 mm, running steady rest, spindle cone sleeve with tip, milling attachment for support, driver flange Ø 200 mm, various small parts, chip protection wall with chuck protection (not shown) Weight: 1500 kg The machine is in very good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be delighted if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: good (used), Functionality: fully functional, Technical data : Dcsb E Iitswg A Rrsmjg Center width 800 mm Center height above bed 175 mm Spindle bore 46 mm 18 speeds, stepped 25 - 2000 rpm Power approx. 2.2 / 4.4 kW with various accessories Space requirement, length approx. 1.8 m Space requirement, width approx. 0.95 m Weight approx. 1 to

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Lead and pull spindle lathe Weiler Commodor *partially overhauled* Item number: 04-03-111 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter of bed: approx. Ø380mm Max. turning diameter support: approx. Ø190mm Max. turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed ​​range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic longitudinal and planar feeds: Dcsb Esvkv Iys Iitmeg Feed range: approx. 0.011-0.80 mm/rev Suitable for threads: metric 0.30-10mm inch 80-2 3/4 G/'' Diametric pitch thread 80-5.5 Dp module 0.2-5 Tailstock: MK4 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 200mm *New* Quick-change holder size B + 1 insert Bed stop Work light *New* Coolant system *New* Complete documentation NOT – Off Various tension wrenches Electric feed protection *New* Drill chuck *Optional* Revolving tip *Optional* Lead and pull spindle cover *Optional* Collet device 173E *Optional* Collet set 173E *Optional* Additional quick-change holders *Optional* Further accessories on request Price and further technical data on request

Condition: ready for operation (used), Year of construction: 2022, Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle motor power 35 kW Dsb Eswfih Ue Iitmscg Number of axis 9 Additional Equipment Machine language: German / Machine manuals available for download in pdf format / G codes type A in Fanuc control / LPS for left spindle Reduction tube for left spindle / 3 jaw power chuck SMW-Autoblock BB-D 210 Ø66 for left spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for left spindle Changing device Hainbuch diam. 65 / LPS system in right spindle / Tailstock on the right spindle (long version) for moving tailstock center CM 3 (not included in the option) / clamping pressure for right spindle; selectable via M function 3 jaw power chuck SMW-Autoblok BBD 175 Ø56 for right spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for right-hand spindle / Tool presetter (tool presetter) / Lateral chip conveyor (standard version) Coolant system consisting of two coolant pumps up to 70 bar, one for each turret, independently adjustable to 70-60-50-40-30-10 bar, mounted on an additional tank of 330 liters, as well as a filter system of 10µm. Coolant washing nozzle / Machine status light / Tool life monitoring (tool life management) / Tool load monitoring Programmable, automatic parts catcher (pneumatic) / The workpiece remover is equipped with a collecting tray that opens and closes pneumatically to remove the workpiece. Coolant supply through right-hand spindle Optional: Cucchi Giovanni Typ DB EVO70 loader This 3-axis CMZ TTL-66-66-T1Y-T2Y lathe was manufactured in 2022. It features a maximum rod diameter of 66mm, turning diameter up to 220mm, and main spindle power of 35Kw. The machine includes a 70 bar high-pressure system with a filter system and an additional tank. A second identical machine is also available from 2022. For more information about this lathe, please reach out to us. Application Types Turning

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, Lead and pull spindle lathe Weiler Intern 160 *Partially overhauled Item number: 04-03-218 Manufacturer: Weiler Delivery time on request Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kgDigital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter over support: approx. Ø198mm Max. turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed ​​range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2 kW Automatic longitudinal & plan feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm Inch 80 – 2 Gg/” Diametrically - pitch thread 200 - 5 Dp module 0.2 - 4 Tailstock: MK3 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 160mm *New* Quick-change holder size A + 1 insert Bed stop Work light *New* Coolant system *New* Complete documentation Emergency stop switch Various tension wrenches Machine feet Electric feed protection *New* Guide and pull spindle cover Dcsb Eehd Uube Iitmog Drill chuck *Optional* Revolving tip *Optional* Collet device 386E *Optional* Collet set 386E *Optional* Additional quick-change holders *Optional* Further accessories on request Price and further technical data on request

Condition: excellent (used), Year of construction: 2007, operating hours: 10,762 h, Functionality: fully functional, CNC TURNING-MILLING CENTER YCM GT-250 MA Item number: 04-02-092 Manufacturer: YCM Very good overall condition Machine workshop tested Delivery time: Immediate - subject to prior sale Year of manufacture: 2007 Dimensions (L x W x H): 3,700 x 2,400 x 2,100 mm Weight: approx. 6000 kg Operating hours: approx. 10,762 Max turning diameter: approx. 270 mm Max turning length: approx. 560 mm Travel X-axis: 230 mm Travel Z-axis: 560 mm Including accessories: Yes Dcjbjv Hqiko E Iitmeg Integrated C-axis: Yes Control: Fanuc TXP-200e Number of tool positions: 12 Number of driven tool positions: 12 Number of controlled axes: 2 Spindle bore: 62 mm Tool holder: VDI 40 Speed range: 20-6000 rpm Total drive power: 15 kW Accessories: 3-jaw chuck Various jaws Tool measuring probe Collet chuck device + collets Various wrenches Various tools Various milling cutters / drills / turning tools Documentation Chip conveyor Tool cabinet Spindle stop Tool holders Further accessories on request Price and additional technical data on request.

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Leit- und Zugspindeldrehmaschine Weiler Matador VS2 - Partially Refurbished Item Number: 04-03-224 Manufacturer: Weiler Condition: Very good general condition Partially refurbished Delivery time: Immediate (subject to prior sale) Specifications Year of Manufacture: Approx. 1987 Dimensions (L x W x H): Approx. 1500 x 1000 x 1700 mm Weight: Approx. 600 kg Digital Display: New 3-axis digital display from Sino Capabilities and Dimensions Maximum turning diameter over bed: Approx. Ø280 mm Dcobeu Tc Ado E Iitmog Maximum turning diameter over support: Approx. Ø160 mm Maximum turning length: Approx. 500 mm Bar capacity: Approx. Ø36 mm Spindle Speed range: Approx. 15–3550 RPM Spindle nose: A 2-5 Drive power: Approx. 3.0 kW Automatic longitudinal and face feeds: Feed range approx. 0.05–0.80 mm/rev Threading capability: Metric: 0.20–12 mm Imperial: 80–2 threads/inch Diametral pitch: 160–6 DP Module: 0.1–4 Tailstock Quill taper: MK3 Included Accessories New Sino 3-axis digital display New 160 mm 3-jaw chuck Quick-change tool post size A + 1 holder Bed stop New work lamp New cooling system Complete documentation Emergency stop system Various wrenches Machine leveling feet New electrical chuck guard New collet chuck system 386E New collet set 386E Optional Accessories Lead screw and feed rod cover Drill chuck Live center Additional quick-change holders Further accessories available upon request. Price and Additional Technical Details Please contact for price and additional technical specifications.

Condition: new, Year of construction: 2024, Functionality: fully functional, OPTIturn TH 3309D Lead and Feed Screw Lathe Manufacturer: Optimum Model: OPTIturn TH 3309D Year of Manufacture: 2024 Condition: New machine Delivery Time: Available immediately (subject to prior sale) Dimensions and Weight Length: approx. 1685 mm Width/Depth: approx. 745 mm Height: approx. 1590 mm Net Weight: 512 kg Working Areas Center Height: 165 mm Distance Between Centers: 830 mm Swing Over Bed: 330 mm Swing Over Cross Slide: 208 mm Turning Length in Bed Bridge: 430 mm Speed Range Number of Speed Ranges: 16 Speed Range: 70 – 2000 min⁻¹ Electrical Specifications Dcob Esvu Aryj Iitmog Motor Power: 1.5 kW Connection Voltage: 400 V Frequency: 50 Hz Spindle Spindle Mount: Camlock DIN ISO 702-2 No. 4 Spindle Bore/Rod Passage Diameter: 38 mm Max. Tool Holder Height: 16 mm Spindle Taper: MT 5 Tailstock Tailstock Taper: MT 3 Tailstock Quill Travel: 110 mm Tailstock Quill Diameter: 32 mm Thread Cutting Metric Thread Pitch Range: 0.4 – 7 mm/rev (26 pitches) Imperial Thread Pitch Range: 56 – 4 TPI (34 pitches) Travel Top Slide Travel: 98 mm Cross Slide Travel: 164 mm Carriage Travel: 695 mm Feed Rates Longitudinal Feed Rate: 0.052 – 1.392 mm/rev (32 feed rates) Cross Feed Rate: 0.014 – 0.38 mm/rev (32 feed rates) Included Accessories Steady Rest (Ø 6 - Ø 50 mm) Follow Rest (Ø 8 - Ø 30 mm) LED Machine Light Reducing Sleeve MT 5 / MT 3 Two Fixed Center Points MT 3 Four-Position Tool Holder (16 mm) Change Gear Set Machine Base Initial Filling with High-Quality Oil Operating Tools Additional Accessories Further accessories available on request. Price and additional technical data available upon request.

Condition: good (used), Year of construction: 1990, Functionality: fully functional, CNC Lathe YCM TC-2 Item number: 04-02-090 Manufacturer: YCM Good overall condition Workshop-tested machine Delivery time: Immediately – subject to prior sale Year of manufacture: approx. 1990 Dimensions (L x W x H): approx. 2400 x 1400 x 2100 mm Weight: approx. 3600 kg Control: Fanuc O-T Technical specifications: Swing over bed: approx. 480 mm Swing over cross slide: approx. 310 mm Spindle bore: approx. 52 mm Max. machining diameter: approx. 250 mm Distance between centers: approx. 550 mm Spindle speed range: approx. 110–3500 rpm Dcjb E Iitjwfw Susmjg Feed rate X-axis: approx. 10 m/min Feed rate Z-axis: approx. 15 m/min Turret: 8 stations Accessories: 3-jaw chuck Various tool holders Chip conveyor Machine leveling feet Documentation Live center Various chuck jaws Further accessories available on request. Price and additional technical details available upon request.