Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Dcedpsz Irbqefx Apbsn Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Maximum working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Dcjdpfx Apoz Izcwobsn Separate hydraulic unit Control panel

Condition: good (used), Year of construction: 1985, functionality: unexamined, power: 1.5 kW (2.04 HP), overall weight: 1,700 kg, Eccentric press EBU H25 Year of manufacture: 1985 Location: Bad Tölz Inspection is welcome. Dsdpfjzv Sitsx Apbjcn We have other used machines available. Please feel free to contact us.

Condition: used, Year of construction: 1977, functionality: unexamined, pressing force: 75 t, Eccentric press EBU SK75 U Year of manufacture: 1977 Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us. Djdpfx Ajzv Skdepbscn

Condition: used, Year of construction: 1972, machine/vehicle number: 72022, This BAIER hot stamping press, type 49/25, is being auctioned off in our industrial auction / machine auction due to the closure of Trola GmbH – including machines, workshop equipment, plastic parts, and material handling equipment – online. Dedoz Ndgnopfx Apbocn You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Dcodez It Dmepfx Apbon Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SD1-200-0051, functionality: fully functional, operating hours: 4,800 h, power: 59 kW (80.22 HP), input voltage: 380 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 250 mm, operating speed: 50 mm/s, table width: 870 mm, table length: 1,300 mm, table height: 1,020 mm, throat depth: 435 mm, ram plate width: 670 mm, ram plate length: 1,000 mm, distance table to ram: 450 mm, clearance between the columns: 1,500 mm, oil tank capacity: 70 l, total length: 2,761 mm, total width: 2,224 mm, total height: 3,819 mm, overall weight: 24,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, SEYI SD1-200 Straight Side Servo Press, 200 Ton Capacity Dcjdpez Ipxaofx Apbon High-performance servo-driven stamping press designed for precision metal forming, blanking, punching, and progressive die applications. The machine features a rigid straight-side frame construction, programmable servo slide motion, tonnage monitoring, electronic overload protection, and a user-friendly touchscreen control system. The servo drive technology provides optimized ram movement, improved forming accuracy, reduced tooling wear, lower energy consumption, and increased production flexibility compared to conventional mechanical presses. The machine is suitable for automotive, appliance, electronics, and general sheet metal manufacturing. Technical specifications include: Press capacity: 200 ton Stroke length: 250 mm Slide area: 1,000 x 670 mm Bolster area: 1,300 x 870 mm Die height: 450 mm Main motor power: 59 kW Power supply: 380-440 V / 50-60 Hz / 3 Phase Machine weight: 24,000 kg Safety light curtain installed Documentation available CE marked The machine is in good working condition and available for inspection. Additional photographs, videos, and technical documentation can be provided upon request. Ideal for high-precision production environments requiring productivity, repeatability, and energy-efficient operation.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: SD1-160-0030, functionality: fully functional, operating hours: 7,000 h, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 64 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 220 mm, operating speed: 720 mm/s, reverse speed: 720 mm/s, table width: 760 mm, table length: 1,150 mm, table height: 940 mm, throat depth: 410 mm, ram plate width: 580 mm, ram plate length: 900 mm, distance table to ram: 400 mm, clearance between the columns: 1,300 mm, oil tank capacity: 70 l, total length: 2,557 mm, total width: 2,161 mm, total height: 3,502 mm, overall weight: 20,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, For Sale: SEYI SD1-160 Servo Press The SEYI SD1-160 is a high-performance straight-side servo press designed for precision metal stamping, forming, blanking, and progressive die applications. With a 160-ton capacity, advanced servo drive technology, and a highly rigid frame construction, this machine delivers exceptional accuracy, productivity, energy efficiency, and process flexibility. The servo-driven ram allows fully programmable slide motion profiles, enabling optimized production cycles, improved part quality, reduced tooling wear, and lower energy consumption compared to conventional mechanical presses. It is well suited for automotive, electronics, appliance, and general metal forming industries. Dedpfx Ajz Dg I Dspbscn The machine features a robust straight-side frame, precision-guided slide system, integrated tonnage monitoring, programmable motion curves, die memory functions, and a user-friendly touchscreen control interface.

Condition: like new (used), Year of construction: 2020, Table dimensions: 2000 x 1000 mm Dcodpfoz Impisx Apbsn Includes forming tools for 4-way edge bending (door).

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS Dedpjz Hcz Sofx Apbjcn - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: good (used), Year of construction: 2001, For sale is a TOX Pressotechnik press, type MBG 004.124. The machine has a pressing force of 40 kN, equivalent to approximately 4 tons, and is suitable for industrial insertion, joining, assembly, riveting, embossing, and upsetting operations. It is worth noting that the machine has a valid inspection certificate until 04/2027. Technical data: Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product type: Press / Insertion machine / Joining machine Pressing force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Working stroke: 80 mm Year of manufacture: 2001 Machine serial number: 210192.1 Machine number / Electrical: 210193.1 Rated voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Power: 0.2 kW Rated current: 0.5 A Fuse rating: 16 A Protection class: IP65 Standard: DIN EN 60204 Djdjznkvpepfx Apbjcn Wiring diagram: STE 325-26 Country of manufacture: Germany Inspection valid until: 04/2027 Condition: used The press operates with a total stroke of 200 mm. The actual working stroke is 80 mm, providing a maximum pressing force of 40 kN. The machine is suitable for inserting bushings, bearings, and bolts, as well as for assembly, riveting, embossing, upsetting, and joining operations. Please refer to the images for details on the exact condition and scope of delivery. You can find more presses and industrial machines – new and used – in our shop! "Everything from one source: We would be happy to offer you suitable financing for your project." PD

Condition: used, Year of construction: 1999, functionality: fully functional, pressing force: 630 t, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, Precision cutting press with coiler and straightening machine Djdpfx Aozrw R Uspbecn Table size: 1,350 mm x 950 mm Good condition, from series production, regular maintenance.

Year of construction: 1998, condition: ready for operation (used), 200 Ton press 230mm stroke Dedpfx Aszp Dnzepbscn Speed 25-35 SPM Die height 500mm slide adjustment 110mm Main motor 20HP Air pressure 5kg/cm2 Y.O.M 1998

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex-works: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressing force 45 tons Table 1000 x 1000 mm Dsdpfx Apsz Ixihebscn Stroke 300 mm Drive 7.5 kW Weight 6 tons 4 guide bolts of the upper ram are broken. These would need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 2,000.00 plus VAT, ex-works.

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18 tons). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, it features a Siemens-made Bruderer U control system. The machine is partially functional: The pushbuttons responsible for the two-hand operation respond with a delay or not at all in setup mode when feeding the material, which makes the material feeding process time-consuming. The machine's spring dampers are worn out, causing the machine to vibrate significantly during continuous operation. The rubber mounts for the discs are brittle and breaking off. Dsdpfx Aez H H Dqopbjcn The UVV inspection for 2025 has been carried out, as has the annual maintenance for 2025. Nominal force: 180 kN (18 tons) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 KVA Power supply: 400V / 50Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine is currently not running but remains connected so that it can be started in an emergency. Dismantling and removal are planned for the end of December, as a crane will already be on-site by then and the machine can be loaded.

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Dcjdjzb Il Nepfx Apbjn Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: good (used), Schuler PE4s 50/800 high-speed press Manufacturer: Schuler Type: PE4s 50/800 61/21 600/3 Press force: 50 tons Stroke: 800 mm Dcsdpfx Apogryc Nsbjn Strokes per minute: 125-300 Ram stroke: 40 mm Kohler unwinding reel 500.1 M More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Djdpjz Duhxsfx Apbocn Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: good (used), functionality: fully functional, overall weight: 32 kg, Gechter 8/12 kN HKPV toggle press Adjustment range: 220 mm Overhang: 120 mm Table: 200 x 167 mm Mounting bore: Ø10 H7 Dsdpoz Iraaofx Apbscn Other models are also available. Shipping via GLS parcel service, freight forwarder, or collection in 06112 Halle is possible. Sale to commercial customers only, with exclusion of warranty.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 3 - D Bending with fully automatic process controlled by NC Maximum pipe diameter: 50 mm Includes 3 bending dies: 26.9 mm, 33.7 mm, 42.4 mm Used very little, therefore in very good condition. Djdpjz Dntusfx Apbecn

Year of construction: 2018, condition: ready for operation (used), overall weight: 4,100 kg, total width: 1,810 mm, total height: 2,780 mm, pressing force: 76 t, product length (max.): 7,060 mm, stroke length: 160 mm, Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details. Djdpfjz E Igwex Apbscn - Max. Installation Height: 885 mm- Min. Installation Height: 725 mm- Throat Depth: 250 mm- Ram Speed "DOWN": 2 - 30 mm/s- Ram Speed "UP": 15 - 68 mm/s- Press Table Height above Floor (with / without oil pan): 730 / 700 mm- Usable Shaft Length: 3000 mm- Usable Shaft Diameter: ø 120 / ø 170 mm- Straightening Bridge Length: 2000 mm- Extension Bed Extension: 2 x (1010 + 1520 mm) / Attached tables 2.5 m length each- Main Pump Drive Power: 7.5 kW- Network Type: L1-3/N/PE (TN-S)- Frequency: 50 Hz- Operating Voltage: 400 V~- Connected Load: 9 kVA- Nominal Current: 14.5 A- Supply Line / Fuse: 32 A CEE / 32 A- Hydraulic Tank Capacity: approx. 280 Liters- Weight (without tools and additional equipment, without hydraulic oil): approx. 4100 kg- Emission Sound Pressure Level Lpa: 78.5 dB(A)- Uncertainty Kpa: 8 dB(A)

Condition: ready for operation (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Dcjdpfoz Iluqsx Apbon Closing force: 400 kN Table dimensions: 670 × 570 m MACHINE DETAILS Operating voltage: 380/260 V Frequency: 50 Hz Rated current: 25 A Power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,900 x 3,200 mm Weight: 10,000 kg Recorded operating hours: 376 h External reference: Alesco - Lot 76

Condition: good (used), Year of construction: 2019, Schuler BEUTLER press Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Dcedpfx Ajz Hbq Espbjn Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. Dsdpfx Apszzd Rgjbjcn The machine is in perfect working order and can be inspected while powered on.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Dcsdpfxez Hlplo Apben