Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric Gsdpfx Abox E T Ilo Ujuk including control cabinet fully overhauled new couling unit READY FOR DISPATCH

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s Gujdpfx Ajx Ex Tmsb Usk - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg

Condition: used, Philipp high-performance cross-cutting and ripping machine or double cross-cutting system for recutting untrimmed models. The system measures, cross-cuts, and trims models after a log band saw or similar. The exact scope of delivery of the mechanization is to be agreed upon. The system is still in operation and can be inspected. Disassembly must be completed approximately by the end of September 2025. Special price ex-site. workpiece length: 1,500 – 5,000 mm workpiece width: 200 – 1,000 mm workpiece height: 45 – 160 mm Godpfow Nnwhsx Ab Ujuk

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Functionally tested Equipment and technical data: Travel distances: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling aggregate: - 6 kW, water-cooled - Tool holder HSK 63 F - Speed 1,000 - 18,000 rpm - Tool changer: 6-position, lateral Drilling head: - 9 vertical drilling spindles at 32 mm pitch - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Grooving saw: in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions: 5200 x 2843 x 1855 mm Godpex Enqbjfx Ab Uouk Weight: approx. 3,500 kg Availability: as agreed Storage location: Lower Saxony

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Gusdpforubg Hex Ab Usk

Condition: used, Year of construction: 2002, Width 1100 mm 2 bands 1 skate 1 rubber roller 2 steel rollers 11 kW motor Digital display Low electrical ascent Electronic conveyor belt advancement variator 380 V Price sold as is, without cleaning or overhaul Gedpfx Abjx El Hyo Usuk

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E - 2 x 110 kW - with outlet conveyor and magnet - with new belts for outlet conveyor and magnet Guodpfsx E T H Uex Ab Uok - rotor length 1 900 mm

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Gjdpfx Asw Idbyjb Ujuk Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1

Condition: used, Year of construction: 2005, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-05-18 - Year: 2005 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gusdpfx Abox Athdo Uek Yorick Diebels

Condition: used, Year of construction: 1996, Used Machine Year of manufacture: 1996 Equipment and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Format cuts: 2800 x 2800 mm Vertical cutting height: 0–75 mm Cutting height at 45°: 0–53 mm Cross-cutting by scale at angle stop: 2800 mm Motor: 4 kW Speed: 4200 rpm Saw spindle: 30 mm Saw blade diameter: 300 mm Table extension: 540 mm Anodized version Gsdpjxrhh Rofx Ab Ueuk Tiltable up to 45° Digital display of tilt angle Prepared for scoring unit Mitre fence Dimensions: 2800 x 1600 x 1500 mm Weight: approx. 880 kg Availability: short-term Location: Röllbach

Condition: new, - Drum length 5500 mm, diameter 2000 mm (equal to Doppstadt SM 620) - Motor 15 kW - with electrical cabinet - with cleaning brushes Gujdpfx Abjx E T Hho Ujk - screen mesh size according to customer´s choice, thickness of steel 8 mm - new machine manufactured in Europe - with manuals and CE - 1 year warranty READY FOR SALE

Condition: used, Year of construction: 2012, total height: 1,930 mm, total width: 1,250 mm, total length: 2,550 mm, Empty weight: 1.190 kg - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: MC00108325 - Main motor power [kW]: 4 Gedpfx Ajx Arfnjb Ueuk - Spindle diameter [mm]: 50 - Table length [mm]: 2500 - Table width [mm]: 410 - Max. tool diameter milling head [mm]: 350 - Tiltable spindle: Manual - └ Min. tiltability [°]: -45 - └ Max. tiltability [°]: 45 - Spindle height adjustment: Manual - Motor braked: Yes - Feeding device present: Yes - Brand: Comatic - Number of wheels [pcs]: 4 - Number of speeds: 8 - Guide present: Yes - Brand: Aigner - Spindle speed: Manual - Min. spindle speed [rpm]: 1500 - Max. spindle speed [rpm]: 9000 - Spindle speed control: Incremental - Voltage [V]: 400 - Current consumption [A]: 33.5 - Fuse [A]: 35 - Power [kW]: 8.4 - Transport dimensions: 2550mm x 1250mm x 1930mm (l x w x h) - Transport weight [kg]: 1190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Saw blade swivel range: 0° - 45° With parallelogram safety guard With parallelogram safety guard with 80 mm extraction port Godpfxjx Enq Ue Ab Ueuk Cutting length: 3200 mm Cutting width: 1000 mm Brake motor: 5.5 kW With scoring unit Maximum saw blade diameter: 350 mm Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm With table extension 800 mm Mitre guard hood Mitre fence Weight approx. 850 kg Availability: short-term Location: NRW

Condition: new, Year of construction: 2025, · NON FERROUS METAL SEPARATOR EDDY CURRENT Gjdpfxsx E T Hbe Ab Ujuk · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU

Condition: used, Year of construction: 1978, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 1978 - Documentation available: No - CE certificate present: No - Serial number: 78-11-11 - Spindle speed: - └ Max. spindle speed [rpm]: 4000 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gedsx Arcmjpfx Ab Usuk Yorick Diebels

Condition: used, Year of construction: 2008, 5-Axis CNC Machining Center Guodpex Enqzofx Ab Ujk Used Machine Year of manufacture: 2008 Condition: Currently still in production Equipment and Technical Data: CNC Control: Siemens 840 D Max. travel of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ±90 degrees C = ±270 degrees HSD milling unit with 10 kW, liquid-cooled Infinitely variable spindle speed up to 24,000 rpm Permanent grease lubrication Tool holder: HSK 63F 1 multi-spindle boring unit with pneumatic advance stroke, mounted to the milling unit 16 individually selectable vertical drilling spindles 1 horizontal twin drilling spindle in X-direction and 1 in Y-direction Drill holders: 10 mm diameter each Note: Workpieces that can be processed with the boring unit: 900 mm with X/Y reference spindle Milling unit and boring unit with extraction connections: 200 mm each, each with pneumatically operated shut-off valve, combined discharge for customer-side dust extraction system, diameter 300 mm Tool changer: 1 drum tool magazine for 5-axis milling unit, 20 positions for tool diameters up to 90 mm or max. 160 mm if sorted arrangement, max. tool length 160 mm One saw blade up to max. 300 mm diameter can be stored and exchanged, but will occupy 3 magazine positions Special tool lengths up to max. 180 mm possible with corresponding restriction of the working area. Max. tool weight: 6 kg (including HSK holder) Total weight in magazine: approx. 60 kg Magazine arranged at the aggregate exit position Machine table: 8 support rails, manually adjustable along the length of the machine, each with 1 retractable workpiece stop, fixed towards the operator Division of the table surface into two clamping zones, each station: - 1 length stop, pneumatically raisable and lowerable - 2 pneumatically raisable and lowerable slide rails - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-liter intermediate tank 16 vacuum suction cups, 110 mm diameter Suction cup set for stair manufacturing incl. touch valve 1 clamping device for posts/bends Incl. chip conveyor Incl. NC-Hops 5 WOP system Incl. bumper safety device at the front and fencing at the sides and rear Centralized lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Condition: refurbished (used), operating hours: 8,000 h, FULLY OVERHAULED-----READY TO WORK, Gedpfxsx E T E Re Ab Uouk HAMMEL 750 E - Power 2 x 110 kW electric - with long discharge conveyor The following work has been done: - 2 pieces hydraulic motors were overhauled - 2 pieces hydraulic pumps were overhauled - new cooler fan installed - neu rubber belt for the conveyor installed - new drive drum for the conveyor installed - Service done with oil change The machine can be seen in working condition on our site at D-59329 Wadersloh.

Condition: used, Year of construction: 2009, operating hours: 2,216 h, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. Guodsx Aq Dpjpfx Ab Usk If you have any questions, feel free to contact us! - Machine available from: 2026-01-19 - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 26 - Operating hours: 2216 - Number of units [pcs]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: overhauled Description: The machine concept is extremely straightforward. The workpiece is placed into the machine. A quickly adjustable stop with pneumatic locking mechanism centers the workpiece within the machine. Upon foot pedal activation, the workpiece is pneumatically clamped and automatically conveyed to the drilling unit (30 m/min). Vertical spindles drill from below, ensuring that chips do not remain on the workpiece as they would on conventional machining centers. The horizontal spindles work on two sides of the workpiece. The workpiece length can be unlimited, as it is moved toward the drilling unit (X-axis). The drilling spindles, either individually or in a group, are freely programmable and move along the Y-axis. Drill depth and horizontal drilling operations are managed by the Z-axis. After all drilling operations are completed, the workpiece is conveyed back to the insertion side or, if desired, to the discharge side. Unlike conventional machining centers, where the workpiece is clamped using vacuum pods that need to be adjusted to the workpiece size, this step is completely eliminated with the 3-axis controlled point-to-point drilling machine. Advantages: - High processing speed - Excellent price-performance ratio - Minimal space requirements All drilling operations can be performed in the smallest space: - Line boring - Structural drilling - Fitting drilling - Case connector drilling Equipment: - Welded machine frame - Drilling head with 7 vertical spindles and 1 horizontal twin spindle - 3-axis CNC control: - X: NC-controlled panel feed via traversing pneumatic clamp - Y: NC-controlled drilling head movement - Z: NC-controlled spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-downs at the infeed - Pneumatic transport clamp - Pneumatically lockable side stop with rollers - PC-based control with Windows XP (1 GB flash memory) - 8" color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical data: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed speed (X-axis): 30 m/min - Spindle speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum overall drill bit length: 70 mm - Drill bit holder: 10 mm shank with clamping surface - Connection power: 2.5 kW - Extraction nozzle diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support at infeed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Guodpjwmhmfofx Ab Usk Availability: short-term Location: North Rhine-Westphalia

Condition: good (used), - heavy magnet with hydraulic motor - supply without belt or optionally with ne belt Gjdpfjx E T E Dox Ab Ujuk - Dimensions of the magnetic block: 125 x 125 cm

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Comfort features: Gsdpfx Aeuhiq Dsb Ujuk • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term

Condition: ready for operation (used), Year of construction: 2010, This machine has just arrived to our stock at D-59329 Wadersloh. We have dismantled it in working condition. Electric Trommel Screen Type NEUSON TS 5220 READY TO USE - trommel: length 5150 mm, diameter 2000 mm (the turning speed of the trommel can be adjusted. - mesh size: 30 mm - with feeding hopper (the speed of the conveyor can be adjusted) - good working condition - See photos and video attached - Total length: 10.5 m, width 2.4 m. height with brushes installed 3.4 m - total power: 55 kW - driven by hydraulic motors Guodpfx Absx E T Ews Ujk WE CAN DELIVER WORLD WIDE

Condition: good (used), Tromel screen in good working condition - Tromel dimensions 7000 x 2500 mm Guodpfjx E T Eqex Ab Ujk - the tromel is segmented in 2 areas for screening of fine fraction 18 x 18 mm and fraction 160 x 160 mm - the screen plates are screwed, could be changed ready for delivery

Year of construction: 2025, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice Gusdpfx Abjx E T Eko Usk - manufactured in the EU with CE-Certificate - new machine with 1 year warranty DELIVERY TIME APPROX. 4 MONTHS

Year of construction: 2016, condition: used, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material Guodpex E T Edjfx Ab Usk - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.