Condition: refurbished (used), operating hours: 8,000 h, FULLY OVERHAULED-----READY TO WORK, HAMMEL 750 E - Power 2 x 110 kW electric Bjdpjxrl Iuefx Aacsww - with long discharge conveyor The following work has been done: - 2 pieces hydraulic motors were overhauled - 2 pieces hydraulic pumps were overhauled - new cooler fan installed - neu rubber belt for the conveyor installed - new drive drum for the conveyor installed - Service done with oil change The machine can be seen in working condition on our site at D-59329 Wadersloh.

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, Bedpfxsxrb Rfj Aaceww adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Cutting plane directly at the saw blade Heavy-duty steel and cast iron construction Smooth-running and precise sliding table made of anodised aluminium with a proven and durable ball contact system on hardened guides; 10-year warranty against wear on the guide rails Large-area squaring frame guided on a telescopic arm and longitudinally adjustable Angle-adjustable aluminium telescopic fence with professional flip stops Parallel fence with quick-release and fine adjustment Large working table made of precision-machined cast iron remains permanently flat Standard table extension and width extension facilitate easy handling of larger workpieces Smooth operation and precise cuts Equipped with a powerful three-phase motor The large-dimensioned saw unit made of cast iron is mounted twice on the cast table, ensuring stability, precision, smooth running, and long service life Maximum cutting height is maintained even with a scoring unit installed Made in Italy TECHNICAL DATA Dimensions and Weights Weight (net) approx. 380 kg Dust Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 60 mm Bsdpfxsxtx Udj Aaceww Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 5.0 kW Duty type of drive motor: S6 Duty cycle of drive motor: 40% Sliding Table and Table Sliding table length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Squaring length: 2250 mm Saw blade tilt: 90 – 45° Max. cutting height at 90°: 100 mm Max. cutting height at 45°: 78 mm Saw blade diameter: 315 mm Note: Saw blade diameter independent of scoring blade Saw blade speed: 4000 rpm Scoring Unit Scoring blade diameter: 80 mm Scoring blade speed: 8000 rpm Availability: short notice Storage location: Flörsheim

Year of construction: 2011, condition: ready for operation (used), Additional Equipment Bjdoxulb Tspfx Aacoww Optionally available with a new Felder RL 200 extraction system from 2024. This PUTSCH SVP 950M panel saw was manufactured in 2011. It features a maximum cut length of 5300 mm, vertical cut up to 5200 mm, and a cut height of 2200 mm. The saw operates with a motor power of 7.5 hp and a blade diameter of 300 mm, rotating at 5000 rpm. Consider the opportunity to buy this PUTSCH SVP 950M panel saw. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm Bwsdpfexbui Tex Aacjw

Condition: excellent (used), GRAULE ZS 135N crosscut saw - used - automatic brake ----- Technical data ----- Cutting height: 135 mm, Cutting length: 420 mm, Swivel range: 45-90-45°, Tiltable up to: 45°, Motor: 3 kW Quality information: - Guides checked / readjusted - Complete basic inspection - Complete basic cleaning - Electrics checked - Immediately ready for use Bedpfx Ajwtzqdeacoww

Condition: good (used), Tromel screen in good working condition - Tromel dimensions 7000 x 2500 mm - the tromel is segmented in 2 areas for screening of fine fraction 18 x 18 mm and fraction 160 x 160 mm - the screen plates are screwed, could be changed ready for delivery Bwodjxrl Ihepfx Aacsw

Condition: used, Year of construction: 2004, machine/vehicle number: P 04-09-002, neu U05 10 001, Spraying machine Venjakob VEN SPRAY-K All pictures only for example - Producer Venjakob - Year of construction 2004 - Current condition: not refurbished - Offer price for refurbished condition - Working width 800 mm (1000) mm - Operating side, right - Duo gun drive system - Dry filter system 4.000 m³/Std. - Diameter exhaust air pipe 400 mm - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt Bjdpfxsumvr Te Aacoww - Gun control system LS 1 - Number of installed lacquer circles 1 Stk. - Airless spraying system 4 Stk. Krautzberger KAA 1300 - Number of lacquer pumps 1 Stk. - Producer lacquer pump Wagner 35-70 - Suitably for solvent based lacquer - Suitably for water based lacquer - Total connection power 7 kW, Stromaufnahme 17 A , Absicherung 35 A - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 1996, coolant ja Axis 3 9041 x-travel 800 mm y-travel 550 mm Bjdpfx Aaeud Trwjcjww z-travel 500 mm

Year of construction: 2011, condition: ready for operation (used), This profile bending machine was manufactured in 2011. It features an automatic transport system for semi-finished LVT panels, with processing capabilities ranging from 500 mm to 2000 mm in length and 140 mm to 600 mm in width. The system includes longitudinal and cross machines, each equipped with 6 milling motors, ensuring precise profiling. If you are looking to get high-quality profiling capabilities, consider the HOMAG PROFI FPL 525/6/04/PW/V LVT machine we have for sale. Contact us for further details. Application Types Bwodpoxuld Ijfx Aacow Complete Production

Condition: ready for operation (used), throat depth: 1,100 mm, Heavy duty double column bandsaw sawing cap: dia 1100 mm autofeed with stroke of 500 mm (with unlimited repositioning) enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 6 meter in-feed rollerconveyor (outside) with 1 manual clamp for aligning workpiece - 3 meter in-feed rollerconveyor (inside) with 2 manual clamps for aligning workpiece - max workpiece width: 1100 mm - each roll is motorized - cap of one roll is 4 ton - 2 meter out-feed rollerconveyor - one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Bodpfx Aaoxpggasceww Max height of workpiece: 1100 mm Length of band saw: 11400 x 67 x 1,6 mm

Condition: excellent (used), Year of construction: 1998, Surface planer – mortiser combination machine Manufacturer: SCM Model: F520 Bwedsxuki Nspfx Aacow Year of manufacture: 1998 Working width: 520 mm Planer table length: 3,000 mm Knife type: Tersa Number of knives: 4 Motor brake: Yes Including mortising unit

Year of construction: 2016, condition: used, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing Bjdoxrl Ibopfx Aacjww More information and pictures can be sent on request.

Condition: used, Year of construction: 1993, machine/vehicle number: 4610.17, - Manufacturer Bürkle - Type DAL 1-1300 R - Year of manufacture approx. 1990 - 1993 - Working width 1300 mm - Machine is being overhauled, then in very good condition - Working height 870 mm - Part height 3 - 80 mm Bwedpfxsumvkvs Aacsw - Operating side right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Counter-pressure cylinder rubberized - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volt, Hz 400 / 50 - Machine number 4610.17 - Product number 8479 8997 - Voltage fluctuations max. +/- 5 %

Condition: excellent (used), HOLZKRAFT T55es Spindle Moulder - used - Tilting spindle, fine-adjustable fence, right/left rotation, power socket for feed unit ----- Technical Data ----- Tilting range: 0–45°, table size: 1,080 x 655 mm, spindle diameter: 30 mm, usable spindle length: 125 mm, max. cutter diameter: 240 mm, speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm, motor: 5 kW, extraction port diameter: 120 mm, lower extraction port diameter: 120 mm, dimensions (LxWxH): 1,200 x 855 x 1,260 mm, weight: 423 kg Quality Information: - Spindle run-out accuracy checked - Brake checked Bsdpfx Aajxrndlsceww - complete basic inspection performed - complete basic cleaning performed - electrics checked - ready for immediate use

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. Bwodpexulapofx Aacew Application Types Pressing / Laminating

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece Bjdpfx Aasxpgggsceww - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 8 manually adjustable supports in X-axis, 3 vacuum pods per console, Vacuum pump 100 m³/h -2* Vacuum connection for templates LED display for pod position indication Working area X: 200 – 6150 mm Working area Y: 0 – 1600 mm (milling/drilling), with edge banding 1525 mm Working area Z: 12 – 125 mm (clearance 150 mm) Bwjdpjxrltkofx Aacew 14 vertical drilling spindles Horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 11 kW / 7.5 kW up to 24,000 rpm With C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer, traveling with y-support Edge banding unit VT 100, 4-sided/all-round – rotation range 740 degrees With dual roller magazine, automatic granulate feeding Adapter units: – Saw, fixed at 90° – 5-axis saw/drill/milling unit Vario NC – Horizontal cutter (corner notching) – Flush trimming and profile scraping blade with extension for flat scraper ICOS open control system with 17" TFT ImaWop 6.0 incl. MDE and production list software Chip conveyor Side safety fencing and front safety mats; Rear: requires wall placement or separate safeguarding

Year of construction: 2025, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available Bwedpfx Aoxrl H Roacjw - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate - new machine with 1 year warranty DELIVERY TIME APPROX. 4 MONTHS

Condition: used, Year of construction: 1994, machine/vehicle number: 6613, With this roll press, you can press different materials together in a single pass. Bsdpfxjwc Skge Aaceww Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1994 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop rope, control via push button ----- Technical specifications ----- Pressing area: 2,550 x 1,300 mm, power per heating plate: 9,100 W, max. opening height: 4,000 mm, number of cylinders: 6 units, dimensions LxWxH: 3,150 x 1,450 x 1,785 mm, weight: 3,700 kg Bwodpfxjxfg A He Aacow

Year of construction: 2021, condition: used, Exhibition machine Year of manufacture: 2021 Technical data: Suction capacity approx. 105 l/min Number of cylinders: 2 Compressor speed: 1450 rpm Max. pressure: 8 bar Filling capacity approx. 54 l/min Tank capacity: 6 l Sound power level Lw: 59 dB(A) Weight: approx. 15.5 kg Availability: short-term Location: Flörsheim Bsdpfx Aokwhwhsacsww

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. If customer wishes it can be seen working. Bodsxn Um Sspfx Aacjww

Condition: used, Year of construction: 2001, - Producer Bürkle - Type CASC 1400 - Year of construction 2001 Bwedpfeumvl Hex Aacow - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Condition: completely overhauled and refurbished Features and technical data: - Cutting area 4,200 x 2,100 x 50 mm - CE mark - Rear full enclosure Bsdpowt E Uyofx Aacjww - Scoring unit - Complete with extraction hood and saw blade - Control panel on saw carriage - Reinforced 4 kW motor - With strip cutting device - Folding stops and aluminium central support - Retractable slatted frame for horizontal cuts Dimensions: approx. 5,250 x 2,700 x 1,350 mm Weight: approx. 750 kg Availability: short notice Location: Hesse