Condition: used, Plate trolley as a welded construction made of steel used one-sided loading area made of plywood 5° incline Side bar height: 915 mm Trolley powder-coated RAL 5010 gentian blue permanent or surface-protected impact and scratch-resistant tires made of thermoplastic rubber on plastic rims with precision deep groove ball bearings, gray, "no marks" thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors Dkobu E H Asvymfnepel 1500 x 370 Wheel diameter (mm)200 x 40 Load capacity (kg)500 Weight (kg)47.5 Dimensions (WxDxH, mm)1500 x 680 x 1200 Availability: short term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 1997, Proven veneer splicing machine, veneer sewing machine from Kuper FWJ920 in extremely good condition Veneer thickness approx. 0.3 - 2 mm Feed speed approx. 15 m/min Thrust 920 mm Power supply 380 V / 0.45 kW Automatic start via contact brush, interruption via foot pedal 1 spool of glue thread Threader Release agent Operating instructions The machine is set up. You can start immediately. Original paint, only a few paint spots touched up. New bridge New nozzle tip and thread guide Dsbu Ejv S H Akj H Apokl New rubberized ejection roller Renewed gray glue thread guard CE mark Operating instructions Dimensions approx. 1350 x 500 x 1750 mm (L x W x H). Weight approx. 185 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in stock and ready for demonstration; see "Other offers from this supplier."

Condition: as good as new (ex-display), Functionality: fully functional, net weight: 380 kg, Dear Sir or Madam, We are offering you a "HOLZKRAFT" vertical wood band saw. Model: HBS 633S - Quick-action saw blade tensioning system - Precision saw blade roller guide - Fast and precise cutting height adjustment via handwheel and rack and pinion with millimeter scale - Safety switch for automatic shutdown when the door is opened - Large cast parallel stop - Angle stop - Table tilt via rack and pinion and handwheel - Saw blades Technical specifications: Cutting height 90° max. 400 mm Maximum cutting width with stop: 570 mm Maximum cutting width without stop: 610 mm Cutting speed 1,630 m/min Debu Eswhmtte H Apskl Saw blade length 4,600 mm Table dimensions: Table length 830 mm Table width 600 mm Table height 830 mm Table tilt 0 – 45° Machine dimensions L x W x H 119 x 82 x 206 cm Machine weight 380 kg

Condition: good (used), Steff 3-Roll Feeder Type TN 80 Motor 0.55-0.74 kW / 400 V Dsbu E Hewifk Hs Apjkl 4 Speeds Roll Size 120 x 60 mm (new) Including Universal Stand

Condition: new, Year of construction: 2006, SCM FS410 planer and thicknesser, in mint condition - never used, only test planed a few times! TERSA cutter block Working width: 410 mm Dobuowh Sw Rs E H Apjkl Maximum planing height: 240 mm Total worktable length: 2050 mm Planer stop dimensions: 1100 x 170 mm Planer stop inclination: 45° Crebqewhrt Sexd Ddvob Cutter block speed: 5000 rpm Cutter block diameter: 120 mm Thickness feed rate: 6-12 m/min. Spiral steel feed roller Rubber feed roller Quick conversion system from planer to thicknesser in one go Mechanical digital display for thicknesser Glide rollers in the thicknessing table Motor power: 5.5 kW - Automatic motor brake Feed motor 0.55/0.75 kW Working height: 830 mm Extraction hood diameter for planer: 120 mm Extraction hood diameter for thicknesser: 120 mm Approx. weight: 700 kg Operating manual Price is net plus VAT

Year of construction: 2015, Condition: ready for operation (used), Main Drive Main motor power 045 Kw / 55 Kw Additional Equipment Dkebu E Hjvr I Ubs Apol PC Control with Beamworks Programme: Computer with Touch Panel and computer cabinet; Cut list download possibilities for CSV file Flipper-Loading Device: For automatic loading of material with length from 500 mm to 6000 mm This TIGER UKA 600 Cross cut installation was manufactured in 2015. It features a 600 mm saw blade, a cutting capacity of 165 x 240 mm at 90 degrees, and a motor power of 5.5 Kw. The machine includes a TigerStop 7.5 Automatic Stop and pusher, enhancing precision and efficiency. Ideal for semi-automatic or fully automatic operations, it supports a maximum feed speed of 40 m/min. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: new, Year of construction: 2023, Vaccum Mobile User video: Consisting of a movable table with 4 vaccum pads, a hand pad, Dkobenvkhleu E H Apel extendable shelf for hand tools Makita vacuum pump incl. charger, battery and hydraulic oil The Vac Up Mobil offers storage space for a vacuum cleaner and is height-adjustable up to 80 mm Lifting capacity approx. 70 kg L x W x H 705 x 670 x 950 mm Weight approx. 40 kg Availability: short term Storage location: Hochheim

Condition: like new (used), Year of construction: 2021, Striebig Standard S 6224 - TRK1 Comfort vertical panel saw with scoring unit, strain gauge, and in mint condition Sliding table length approx. 5300 mm Cutting height approx. 2240 mm vertically and 2100 mm horizontally Max. cutting height 80 mm Saw blade bore 30 mm Saw blade diameter up to 303 mm Drive motor 4.4 kW (S1) VSA scoring unit continuously adjustable Sliding wooden slatted frame, TRK1 Comfort package with pneumatic clamping of the motor carriage, digital measuring system in the Y direction, pneumatically braked support rollers, and laser in the horizontal direction Digital measuring system in the X direction Aluminum small part support Wall mounting Extraction nozzle 140 mm Emergency stop switch Operating manual CE mark Original condition, extremely little used, see photos. Machine is assembled and ready for demonstration. Dimensions approx. 6630 x 1390 x 3060 mm (L x W x H). Weight approx. 1000 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in stock and ready for demonstration. See "Other offers from this supplier." Djbu Eov Su Nfe H Apekl

Condition: used, volume capacity / length / mm height / mm total power requirement / kW weight of the machine ca. / t required space / m Dsbjwgi S Aeu E H Apekl

Condition: new, Feeder Year of manufacture 2022 max. throat 1050 mm Feed rollers 3 pieces roller diameter 120 mm Dkjbonvkhzju E H Apol Roll width 60 mm Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: excellent (used), Year of construction: 2017, Vacuum lifter from Schmalz for heavy panels with new suction cup rubber. Dkebuev S Synj E H Apsl Load capacity 150 kg horizontally and vertically. Suction cup can be motor-pivoted 90 degrees. Suction box 1000 x 675 mm. Acoustic warning signal if vacuum is too low. 400 V, 1.5 kW. Can be attached to an on-site chain hoist. CE mark. No inspection booklet available. Suction cup rubber replaced. As good as new. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "Other offers from this supplier."

Condition: new, Year of construction: 2021, Feeder Year of manufacture 2021 max. throat 1050 mm Feed rollers 3 pieces Dkobu Esnvkh Ej H Apjl roller diameter 120 mm Roll width 60 mm Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: excellent (used), Protective hood for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum milling diameter 160mm With brush and feed wedge Obviously has not been used much so far. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this supplier". Debuovz Dr Ie E H Apskl

Year of construction: 2021, Condition: used, Exhibition compressor Year of manufacture 2021 Suction capacity approx. 105 l/min. Number of cylinders 2 Compressor speed 1450 rpm Maximum pressure 8 bar Dobu Ejkwhwhj H Apokl Filling capacity approx. 54 l/min. Tank capacity 6 l Scahll power level Lw 59 dB(A) Weight approx. 15.5 kg availability: short term storage location: Hochheim

Condition: new, Set of abrasives for wide belt sanders Manufacturer: EKAMANT Types: ARKFEO, ARKFO, EKA 3000, and EKA 3001 Grits 80, 120, 150, 240, 320, 400, 600, and 800, 1 box of each, only 320 grit is available twice. All boxes are unopened and contain 9, 10, or 11 belts. A total of 90 sanding belts are included. Djbu E H Aov T Nmnepjkl Sanding belt dimensions: 1350 x 2150 mm This size is suitable for many Homag Sandteq machines, Bütfering Vega, and many others. Please check the exact dimensions for your machine. Sold only as a set, not individually. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse ready for demonstration; see "Other offers from this supplier."

Condition: used, Year of construction: 2000, used feed Year of manufacture: 2000 Doboumpp Esu E H Apjkl suitable for Kündig Uniq edge grinding machine Technical data: max. projection: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Roller travel: 25 mm Speed levels: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg the console shown in the picture is not included in the scope of delivery! Location: Hochheim Availability: Immediately

Condition: new, Year of construction: 2021, Feeder Year of construction 2021 max. throat depth 1050 mm Feed rollers 4 pieces Roller diameter 120 mm Roll width 60 mm Spring travel of the rollers 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Dkjbustmyq Ro E H Apsl Feed: dimensions LxWxH 750x300x570 mm, weight 33 kg Stand: dimensions 1100x320x300 mm, weight 42 kg Availability: immediately Storage location: Hochheim

Condition: used, Year of construction: 2000, Lifting and turning table Year of manufacture 2000 Table size 1300 x 800 mm moves on 2 levels Upper level tiltable Load capacity 500 kg Connection 400 V Availability: short term Dobu E H Ajvq Tagjpskl Warehouse location: Flörsheim

Condition: new, Work and assembly table The ergonomic work and assembly table ErgoPlan EP1 is equipped with a workbench top made of selected and solid red beech wood. The surface is waxed and polished. The stepless height adjustment under load takes place evenly and precisely even with asymmetrical load on the plate. TECHNICAL DATA Planer bench top without tongs1.700 x 640 x 120 mm 2 tong keys: front tong of solid cast iron/steel construction rear tong robust aluminum box guide (with adjustable guide prism and plastic sliding guide) plate thickness120 / 60 mm useful stroke300 mm overall height ErgoPlan780 mm Weight of the workbench plate approx. 95 kg Weight approx. 240 kg Attached cover on the back side serves as a protective cover against shearing and as an anti-crushing cover. The lifting unit is concealed in the left lifting column and thus protected against dirt and damage. Load capacity up to 400 kg Total height max. 1080 mm 2 bench hooks Ergoplan consisting of aluminum round bench hooks with ball locking device 30 mm, length 200 mm 1 vertical clamp for workpiece fixation from above, with 1 grid bolt, Dobujkwhwzj E H Apskl adjustable up to 200 mm workpiece thickness, 360° swiveling Availability: short term Storage location. Hochheim

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Dkjbu E Hjv Ntb Uo Apol Bit This item is an unused display unit.

Condition: used, Exhibition Machine Stapling Device 18-55 mm with Contact Release Dkobu E Hsv Ntbnj Apol Condition: Like New Included: Device Case Safety Goggles Allen Wrench Device Oil Operating Instructions This device is an unused exhibition item.

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Charger Charging cable Allen key Debuov Ntbue E H Apekl Safety goggles Plastic cover Operating instructions This device is an unused display unit.

Condition: used, Display unit Condition: Like new Multi-drive anchor nailer for 34° plastic- or paper-bonded nails from 40-50 mm Included in delivery: Tool Allen key Safety goggles Tool oil Dobu E H Aov Ntbzspekl Operating instructions This tool is an unused display unit.

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Dkjbusv Ntb Ie E H Apel Bit This item is an unused display unit.

Condition: used, Used machine Equipment and technical specifications: Lock case milling unit Lever hole drill Mortise milling cutter Including accessories Motor 1.7 kW Dkobu E H Aewhuk Tepel 2800 rpm Location: Mainz Availability: Short term