Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. Gusdpjzzd Rgefx Ad Rsi The machine is in perfect working order and can be inspected while powered on.

Year of construction: 1976, condition: used, Year of manufacture: 1976, overhauled: 2003 Maximum pressing force: 500 KN, Maximum extraction force: 400 KN, Maximum holding force in the pressing position: 400 KN, Maximum die return force: 20 KN, Gedpfszmh Rhsx Ad Rsui Upper punch stroke: 120 mm, Upper punch section: 220 mm, Number of strokes: 7-32 1/min, Maximum filling height: 180 mm, Maximum pressing stroke: 90 mm, Maximum extraction stroke: 90 mm, Maximum pressing stroke: 12 mm, Pneumatic upper punch tension: Maximum: 100 mm, Compressed air supply, Air consumption, Intake air: 200 1/min, Total connected load: 18.00 kW, approximate width: 2000 mm, approximate depth: 1700 mm, approximate height: 3250 mm, press weight (approximate): 5,500 kg, press housing: 190 l (running oil), operating noise: 78 dB (A)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, C-frame press for clinching technology Pressing force: 4.8 t Air pressure: 6 bar Total stroke: 32 mm Power stroke: 3 mm No tools included Gsdjy Ey Hzspfx Ad Reui

Condition: used, Year of construction: 1966, Technical details: pressure: 16 t distance between columns: 450 mm stroke: 350 mm total power requirement: 3 kW Gusdpfxoz Dgczs Ad Rsi dimensions of the machine ca.: 1,2 x 0,8 x 2,5 m

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SD1-200-0051, functionality: fully functional, operating hours: 4,800 h, power: 59 kW (80.22 HP), input voltage: 380 V, input current: 70 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 250 mm, operating speed: 50 mm/s, table width: 870 mm, table length: 1,300 mm, table height: 1,020 mm, throat depth: 435 mm, ram plate width: 670 mm, ram plate length: 1,000 mm, distance table to ram: 450 mm, clearance between the columns: 1,500 mm, oil tank capacity: 70 l, total length: 2,761 mm, total width: 2,224 mm, total height: 3,819 mm, overall weight: 24,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, SEYI SD1-200 Straight Side Servo Press, 200 Ton Capacity High-performance servo-driven stamping press designed for precision metal forming, blanking, punching, and progressive die applications. The machine features a rigid straight-side frame construction, programmable servo slide motion, tonnage monitoring, electronic overload protection, and a user-friendly touchscreen control system. The servo drive technology provides optimized ram movement, improved forming accuracy, reduced tooling wear, lower energy consumption, and increased production flexibility compared to conventional mechanical presses. The machine is suitable for automotive, appliance, electronics, and general sheet metal manufacturing. Technical specifications include: Press capacity: 200 ton Stroke length: 250 mm Slide area: 1,000 x 670 mm Bolster area: 1,300 x 870 mm Die height: 450 mm Main motor power: 59 kW Godpoz Ipxajfx Ad Reui Power supply: 380-440 V / 50-60 Hz / 3 Phase Machine weight: 24,000 kg Safety light curtain installed Documentation available CE marked The machine is in good working condition and available for inspection. Additional photographs, videos, and technical documentation can be provided upon request. Ideal for high-precision production environments requiring productivity, repeatability, and energy-efficient operation.

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm Guedpfx Aj Ad Sh Njd Rji stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: good (used), Year of construction: 1967, machine/vehicle number: 6043, Offer 26180 Technical data: - Maximum pressing force: 100 t - Maximum ram stroke: approx. 500 mm Gusdpo Afxanjfx Ad Rsi - Installation height: approx. 1000 mm - Overhang to center of ram: 520 mm - Ram clamping surface: 350 x 350 mm - Ram clamping pin: 40 mm - Table size: 1000 x 1150 mm - Table opening: 150 x 780 mm - Table height above floor: 720 mm - Drive: 400 V / 8 kW - Space requirement: approx. W 1150 x H 2900 x D 2150 mm - Weight: approx. 4800 kg

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. Guodov E Nlzopfx Ad Rsi New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), functionality: fully functional, overall weight: 800 kg, Year of construction: 1995, pressing force: 10 t, operating speed: 260 mm/s, stroke length: 200 mm, table length: 440 mm, table width: 430 mm, type of input current: AC, Equipment: safety light barrier, Manufacturer JAM Model HYP-1000 Model year 1995 Capacity 98KN (10t) Stroke 200mm Nyitott magasság: 395mm asztal méret 440 × 430mm Shock hole φ32 × 60L mm ram aproaching speed:260 mm/s ram pressure speed:19 mm/s ram return speed: 219mm/s With light safety device voltage 3-phase 200v 1,5kw Gjdpfx Ajwcqc Uod Reui press body mass: 800kg operation oil: 43liter ​ Height (mm) 1395 Width (mm) 700 Depth (mm) 1170

Condition: new, pressing force: 100 t, stroke length: 300 mm, – Capacity 100 tons – Cylinder stroke 300 mm – Working width 1070 mm – 2 speeds – With V-blocks/pressure plates Gjdpfx Adowg Smis Roui – Pressure gauge – Emergency stop – Documentation – 400 V

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm Gedpfxsi A S I Do Ad Reui pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable.

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment Gedep Dt Uuopfx Ad Rsui - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Year of construction: 1981, condition: like new (used), Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used. Gusdsd Ntd Dspfx Ad Roi Technical data: Year of manufacture: 1981 Pressing capacity in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table size (lxb) in mm: 1600 x 1300 Ram size (lxb) in mm: 1500 x 1300 Daylight in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6,3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power consumption in kW: 150 Overall size (lxbxh) in mm: 3550 x 1200 x 5940 Total weight in kg: 50000

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings Godpfxedzqdde Ad Rsui - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing Guedpfxou N Sius Ad Rji -Dimensions: 500/280/H180 mm -Weight: 53 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, stroke adjustment: 75 mm, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm Guedpfx Aeu Hav Rjd Rei table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Gjdeu D Dhxepfx Ad Rjui Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: good (used), Year of construction: 1991, operating speed: 8 mm/s, reverse speed: 40 mm/s, retraction force: 30 t, column diameter: 200 mm, Brand: LoireSafe Year: 1991 Type: Hydraulic Maximum Force: 15-150Tn Return force: 30Tn Godpfeudv D Nox Ad Rjui Movable platen stroke: 1200mm Table dimensions: 2800x1500mm Moving platen dimensions: 2800x1500mm Table displacement stroke: 1500mm Guided height: 800mm Diameter of columns: 200 mm Height of the table to the floor: 700 mm Power: 11Kw Approach speed: 50 mm/sec. Working speed: 8 to 2mm/sec. Return speed: 40 mm/sec

Condition: good (used), Year of construction: 1974, pressing force: 100 t, Model: OB1 Pressing force: 100Tm Torque: 3500kg Plate thickness: 10mm Pusher slider: 5-159mm Distance between table and spindle/pusher: 530mm Max. spindle/pusher travel: 130mm Guodpfoudwr Uex Ad Rei Strokes per minute: 53

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Guodpfsv Sd S Nox Ad Rji Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 28800 € 550.08 € 20 to 1.7 mm 360 mm 550 mm 140 mm 1 - 50 mm 160 1/min 4 40 mm 35 mm 200 mm 240 mm 2.2 kW 1360 mm 1100 mm 1860 mm 1250 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Gsdpfxowiry Us Ad Roui Equipment in accordance with CE regulations OPTION: Vibration pads € 132,--

Condition: good (used), pressing tool, sheet metal former, forming tool, ball forming tool -Pressing tool: ball forming tool -Radius: 50.11 mm Gjdpfxjvmx T Do Ad Roui -Hole: Ø 40 mm -Dimensions: Ø 165 x 270 mm -Weight: 18.4 kg

Condition: good (used), Hydraulic press, single column press, C-column press, oil hydraulic press, hydraulic single column press, press machine, hydraulic punch for Schüco tools hydraulic press, multifunctional punch, punch, universal punch, punching machine -Hydraulic press: Hydraulic single-column press with stops on both sides -Pressing force: 15 tons -Hydraulic unit: 220 bar stroke: 25 mm -Hole: Ø 28 mm -Projection: 100 mm -Operation: foot pedal -Installation dimensions: 2575/800/H1350 mm -Transport dimensions: 1260/800/H1350 mm -Weight: 223 kg Gusdpou Scp Refx Ad Rji

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Guodpfevbdyfsx Ad Rji Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: good (used), Year of construction: 2003, functionality: fully functional, type of input current: three-phase, pressing force: 10 t, stroke length: 200 mm, operating speed: 260 mm/s, table width: 430 mm, table length: 440 mm, oil tank capacity: 46 l, overall weight: 800 kg, Equipment: documentation/manual, safety light barrier, J.A.M "Japan" made 10 ton hydraulic press for sale in excellent condition. Manufacturer JAM HYP-1000 model Model year 1995 Capacity 98KN (10t) Stroke length 200 mm Open height: 395 mm Table size 440 × 430 mm Punch hole φ32 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 19 mm/s Ram return speed: 219mm/s With light safety device Two-handed operation. Guedpfx Adovbfkrj Rsi Voltage 3 phase 200v 1.5kw Press body weight: 800kg Operating oil: 43 liters Height (mm) 1395 Width (mm) 700 Depth (mm) 1170 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.