Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Dkjdpfxevvizko Apmjw Storage location: Garbsen

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Dkjdpfxsvvkfwo Apmjw

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Dedpfxevvi Nne Apmskw Storage location: Supplier

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Dksdpfevvkipsx Apmsw

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Dksdjvvi Iqepfx Apmew

Condition: used, Year of construction: 1994, Storage location: Nattheim Dkjdpfx Aowmm Nropmjw

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Dsdpfx Aoz Ni S Dopmekw Weight: 7,200 kg Transport packages: 8 pcs. Operating hours: 3,625 h

Condition: used, Year of construction: 2010, Panel saw Manufacturer: Nardello Model: Elegance S/N2155 Year of manufacture: 2010 Technical specifications: Dedpfj Adzc Aex Apmskw - with infeed and outfeed roller conveyor - Minimum width: 60 + 60 mm - Maximum width: 450 + 450 mm - Length: 350 - 2,000 mm - Panel thickness: 15 - 30 mm Note: The technical specifications and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, Holzkraft SCM Format Panel Saw minimax si 4 - 315 / 32 with Scoring Unit Exhibition machine sold at a special price With pivoting saw blade and format sliding table made of anodized aluminum Article number: 5504832VR Solid work table made of heavy-duty, ribbed gray cast iron – for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precise format sliding table made of anodized aluminum – easily movable with high-quality ball bearing system Hard metal guide rails – for long-lasting precision and minimal maintenance Pivoting gray cast iron saw unit with double segment guide – exact zero-point pivoting for maximum cutting accuracy Solid parallel fence with round bar guide Equipped with adjustable eccentric clamping device Integrated miter fence on the sliding table – for quick and precise miter cuts Scoring unit with belt drive TECHNICAL DATA Dimensions and weights Weight (net) approx. 640 kg Connection for dust extraction Dust extraction port diameter 120 mm Dust extraction port diameter saw blade guard 60 mm Installation information Transport width 980 mm Machine body length 1900 mm Machine body width/depth 840 mm Space requirement length 7235 mm Space requirement width/depth 4410 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Output power (motor power) 5.0 kW Rated duty cycle drive motor S6 Duty cycle drive motor 40% Dksdpfe Afat Ajx Apmow Sliding table and table Format sliding table length 3200 mm Format sliding table width 360 mm Format sliding table height 175 mm Table length 940 mm Table width 560 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3200 mm Rip fence length 3200 mm Saw blade tilt 90 - 46° Max. cutting height 90° 100 mm Max. cutting height 45° 71 mm Explanation of max. cutting height: Independent of the scoring unit Diameter of saw blade 315 mm Explanation of diameter of saw blade: Independent of the scoring unit Saw blade speed 4000 min⁻¹ Scoring unit Diameter of scoring saw blade 120 mm Scoring saw blade speed 9000 min⁻¹ EQUIPMENT Equipment Scoring unit: Driven by the main saw blade motor via flat belt, with saw blade Ø 120 mm Anodized aluminum format sliding table ✔ Handle for sliding table ✔ Material roller on the rip fence frame ✔ Saw parallel fence with round bar guide Fences: Two professional folding fences Rip fence shoe ✔ Eccentric clamp ✔ Table extension ✔ Table lengthening ✔ Saw blade guard ✔ Location: in stock, 54634 Bitburg - immediately available -

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Handover: in its current condition as inspected -Accessories: see pictures -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min Dkodpfx Apjz Rxb Rsmow -Adhesive system: Hot melt adhesive granules in the glue pot below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 PLUS P-FU -Exhibition machine- Start-up with frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum vacuum: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Dsdpfx Apj Aaz S Asmskw Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Weight: 1,064 kg, According to: GS - HO - new exhibition machine -

Year of construction: 2016, condition: used, Shrink film packaging line Manufacturer: LCR Group Dsdpfxj Ad If Rs Apmjkw Year of manufacture: 2016 Packaging line consisting of: Infeed table 3000 x 1800 x 880 mm Film station with film cutting 1000 x 3000 x 2150 Buffer conveyor table 5500 x 1500 x 880 mm Side sealing and trimming of excess film 1200 x 3000 x 1300 Shrink tunnel 4600 x 2300 x 1900 Outfeed table 3000 x 1800 x 880 Note: Vacuum lifters at the infeed/outfeed are available as an option for an additional charge. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Optimized miter saw Manufacturer: Salvador Dsdpe Ad Ighefx Apmokw Type: SuperCut 500 Year of manufacture: 2017 Technical data - Saw blade diameter: 500 mm / 450 mm - Maximum feed rate: 200 m/min - Working height: 900 mm - Compressed air consumption: 400 Nl/min - Compressed air supply: 6 bar - Minimum connection power: 14 kW - Extraction speed: 45 m/s Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Biesse Selco Type: Sektor 430 Year of manufacture: 2011 Technical data - Rated power of the system: 15.5 kW - Total length of the cutting line: 3865 mm - Maximum cross-cut length: 3500 mm - Maximum package thickness for processing: 65 mm - Positive programmed end position of the feed carriage: 3150 mm - Negative programmed end position of the feed carriage: 35 mm - Drive of the feed carriage: brushless - Additional encoder for position monitoring: yes Dsdj Ad Ignjpfx Apmekw - Left stop: yes Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A 1643 Year of manufacture: 2016 Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit Dksdo Ad Iw Hepfx Apmsw - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A1432 Year of manufacture: 2016 Technical data 3-axis machine HSD drilling head - Maximum motor speed: 6,000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80-120 mm Drive power: 17.3 kW Note: Dksdpfx Ape Ad Iw Tjmew The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2002, functionality: fully functional, 4-axis machine with WOODWOP 4.5, from a carpentry workshop Working dimensions: X-axis 3,200 mm Y-axis 1,250 mm Dksdpfx Apo Afh Izomjw Work table: 6 pcs workpiece supports, each with 3 vacuum cups 4 pcs lifting rails for heavy workpieces 1 rear and 1 front stop row Vacuum pump 100 m³/h Tool arrangement: Main spindle 7.5 kW HSK 63 F with water cooling Speed 1,500 - 18,000 rpm with C-axis / positioning axis for adapter tools Drilling unit with 18 vertical spindles 6 drilling spindles horizontally Dado saw unit fixed in the X-direction Tool changer magazine, 8 positions, mounted at the rear of the support, moving in the X-direction, for milling tools and units Control: HOMATIC 2000 with WOOD WOP 4.5 Safety equipment: ----- * Foot mat protection in front of the machine Without tools

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Dodpfxoxr Tp Hs Apmskw

Condition: used, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Year of manufacture: 2001 Colour: Grey - Details: Dedpfx Apoymlahsmskw - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - CE marking present: Yes - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1990 Djdpe Af I Ifofx Apmekw Features and Technical Specifications - Motor: 11 kW - 2600 pa - Inlet openings: 350 mm

Condition: used, machine/vehicle number: 008729, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Dksdszylv Ispfx Apmsw Operating Units: 8 nr

Condition: ready for operation (used), machine/vehicle number: 90-58-07, functionality: fully functional, planing width: 240 mm, overall weight: 4,200 kg, spindle diameter: 50 mm, planing height: 240 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 120 mm Infeed table length: 1,440 mm Number of spindles: 6 pcs. Spindle diameter: 50 mm Planer shaft speed: 6,000 rpm Max. planer block diameter: 200 mm Spindle 1 Spindle position: Bottom Motor power: 7.5 kW Spindle 2 Spindle position: Right Motor power: 7.5 kW Spindle 3 Spindle position: Left Motor power: 15 kW Spindle 4 Spindle position: Top Dkedpfx Apjz Ni Edsmjw Motor power: 15 kW Spindle 5 Spindle position: Top Motor power: 11 kW Spindle 6 Spindle position: Bottom Motor power: 15 kW Conveyor motor power: 5.5 kW Conveyor drive: Cardan drive Feed speed: Manual Min. feed speed: 5 m/min Max. feed speed: 35 m/min Feed speed control: Stepless Diameter of feed rollers: 1,400 mm Diameter of extraction nozzle: 150 mm MACHINE DETAILS Voltage: 400 V Current consumption: 128 A Power: 80 kW Dimensions & Weight Dimensions (L x W x H): 1,900 x 3,900 x 1,800 mm Weight: 4,200 kg Transport packages: 1 pc. EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 1000056636, functionality: fully functional, cutting width (max.): 3,500 mm, overall weight: 3,969 kg, cutting length (max.): 3,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 3,200 mm Max. cutting width: 3,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,400 x 2,400 mm Weight: 3,969 kg Shipping packages: 4 units Dodpfxoz Ni Eqs Apmokw EQUIPMENT CE marking Documentation

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 109/1-606, functionality: fully functional, operating hours: 12,415 h, overall weight: 4,800 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 11 Pre-milling unit Gluing unit Pressure rollers: Type 1914 Cutting unit: Type KA701 Rough milling unit: Type 1828 Fine milling unit: Type FR701 Edge rounding unit: Type FF701 Radius drawing unit: Type ZK501 Straight edge drawing unit: Type 1856 Brushing unit: Type ES701 Gluing system Gluing system: Glue pot TECHNICAL DETAILS Dedpfxoz Ni Hns Apmekw Edge band thickness: 3–20 mm Panel thickness: 8–60 mm Panel width: max. 65 mm Panel length: 180–250 mm Feed speed: 10–25 m/min Feed control: stepless MACHINE DETAILS Voltage: 400 V Current consumption: 45 A Dimensions & Weight Dimensions (L x W x H): 9,050 x 1,200 x 2,200 mm Weight: 4,800 kg Transport packages: 2 units Operating hours: 12,415 h EQUIPMENT Tools for pre-milling unit available Tools for pressure rollers available Tools for cutting unit available Tools for rough milling unit available Tools for fine milling unit available Tools for edge rounding unit available Tools for radius drawing unit available Tools for straight edge drawing unit available Tools for brushing unit available CE marking Documentation

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 161/1-10, functionality: fully functional, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, overall weight: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 7 1st unit: Pre-milling unit 2nd unit: Gluing unit Dksdoz Ni Rmepfx Apmew 3rd unit: Pressure rollers 4th unit: Edge trimming unit 5th unit: Rough milling unit 6th unit: Corner rounding unit 7th unit: Edge planing unit MACHINE DETAILS Voltage: 400 V Current consumption: 38.85 A Fuse rating: 50 A Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,500 x 2,580 mm Weight: 1,500 kg EQUIPMENT Tools: Pre-milling unit Gluing unit Tools: Pressure rollers Tools: Edge trimming unit Tools: Rough milling unit Tools: Corner rounding unit Tools: Edge planing unit CE marking