Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Fjdpj Afznuefx Aanepp Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 2004, Horizontal band saw HEMA HTR 600 Year of manufacture: 2004 For various materials (depending on the installed saw blade) Technical data: Wheel diameter: 600 mm Working height: 955 mm Total height: 1800 mm Total width: 2550 mm Total length (conveyor belt): 2820 mm Max. cutting height (distance conveyor belt - saw blade): 140 mm Saw blade length: 5600 mm Saw blade width: 8 to 25 mm Saw blade thickness: 0.65 mm Cutting speed: 1640 m/min Conveyor belt speed: 0.5 to 5 m/min Conveyor belt width: 650 mm Weight approx. 700 kg Fpjdpfx Ae Aigk Tsanop Dust extraction connections - Cutting point: 100 mm - Deflection point: 100 mm - Conveyor belt extraction connection: 100 mm Motor power - machine: 2.2 kW Motor power - feed: 0.12 kW Voltage: 3 x 400V

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 55 kW (74.78 HP), input voltage: 400 V, type of input current: AC, total length: 13,000 mm, total width: 4,600 mm, total height: 2,330 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, Membrane Press WEMHÖNER VARIOPRESS® – Model BASIC Plus Technical Data: Press System: Hydraulic, single-daylight, upward-acting press with 2 tables, with automatic Vario-pin system and turning system. Year of Construction: 2012 Press frame consists of a steel frame, which is screwed together to form a closed unit. Each frame is made from a single piece. Dimensions of the heating plate: 2,800 x 1,500 mm Height of the press chamber: 60 mm Working height: approx. 950 mm Opening width: max. 150 mm Automatic membrane tension: Yes Number of press cylinders: 6 Diameter of press plungers: Ø 125 mm Design of the press tables: 2 tables with pin system, solid steel plates – top and bottom. Max. loading or workpiece size: approx. 2,540 mm x 1,250 mm Total press force: 2,400 kN Installed power: 55 kW Operating voltage: 400 V Control voltage: 24 V Brake voltage: 205 V Frequency: 50 - 60 Hz Electrical equipment: According to EN Cutting station: Yes Chamber pressure: max. 6 bar Operating pressure of the hydraulic system: max. 320 bar Required air pressure: min. 8 bar / approx. 80 Nl/ Multi-function frame: Yes – Wemhöner patent – Height of the multi-function frame 20 mm 2-daylight lifting system including support table 2 tray carriages with an aluminum plate. The aluminum plate consists of an aluminum sheet with grooves and channels for ventilation, as well as a support frame of 20 mm. Turning Turning device – lateral As soon as the tray reaches the position at the outlet of the press, the turning head rotates the entire workpiece mat by 180°. During the turning process, a vacuum system is activated to fix the door mat under the turning head. As soon as the turning head reaches the end position, the vacuum is switched off, and the doors can be trimmed by the operator in one step with a special knife. Fpjdpe Aid Etofx Aanop - Robust, welded steel frame construction for supporting the machine elements - Hydraulically controlled turning process - Turning table with plastic cover - Vacuum system for the turning table - Turning process approx. 18 seconds Electrical control: Programmable controllers (PLC) of type SIEMENS Step 7 for the entire scope of supply. Control panel as a touch panel for the PLC control SIEMENS MP 277 with a 10-inch color monitor in the national language. Decentralized switching and control panel including wiring. Analog modem for monitoring the program sequence of the PLC controllers.

Condition: used, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Year of manufacture: 2004 Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 Fpodpfx Aaoyy Nnqsnep - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: Z2 - Flight circle (ø): 93 mm - Bore: 30 mm - Marking: MAN - Length: 35 mm - Material: Steel Fjds Ah R A Dspfx Aanopp

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Bargain due to business closure Striebig Standard 3 TRK Fjdpe Ah D Hfefx Aanopp

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 4 kW (5.44 HP), cutting height (max.): 105 mm, cutting width (max.): 900 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, saw blade bore: 30 mm, total length: 2,000 mm, overall weight: 450 kg, Panel saw FELDER, model K700, year of manufacture 2005, with scoring saw and tilting saw blade. Sliding table 2000 mm, condition: almost new. Fedpfs Ah Iazex Aanspp

Condition: used, 18° router bit for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: HW - Flight circle (ø): ~ 138 mm - Bore: 30 mm - Length: 65 mm - Material: Steel Fodpj Ah Rcdsfx Aanopp

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Round stock milling machine, manufacturer Stellmacher, type RST310/3-3 SE, for producing cylindrical milled wood with diameters from 150 to 310 mm, with an electric drive of 45 kW for the milling head. The feed rate is adjustable from 1 to 12. Two roller conveyors on wheels are used for feeding and removing the wood. Fpedpfx Aaoy Ta Ibjnjp This machine, with its large diameter range, is a particularly rare find as a used machine.

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long Fodpfxsngz N Is Aanjpp 1 piece 140 mm Ø x 190 mm Ø x 173 mm long

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. Fodszy R Rdjpfx Aanspp - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! - Furnace consumption: approx. 15 - 25 kg/h. - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Sale does not include the stainless steel chimney.

Condition: used, Large router bit for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. Fodps Ait Snjfx Aanjpp Blade fitted: R25 Technical data: - Blade: Z3 - Flight circle (ø): ~ 170 mm - Bore: 40 mm - Marking: MEC - Length: 80 mm - Material: Steel

Condition: used, Year of construction: 1992, Spindle arrangement: bottom – right – left – top Planing width min./max. 8-180 mm Planing height min./max. 5 - 120 mm Length of infeed table: 2000 mm Feed rate: 8 m/min Feed rollers: pneumatic Infeed roller before the jointer Electric height adjustment of the feed beam Manual width adjustment via crank 4 planing cutterblocks, each with 2 knives Fpsdoz Abthspfx Aanop 1 pre-jointer Fold-up safety guard 4 dust extraction connections Total connected power approx. 18 kW Dimensions approx. L x W x H 3000 x 1000 x 1450 mm Weight approx. 1200 kg

Condition: used, Year of construction: 1982, Planing width: 500 mm Table length: 2840 mm Cutterhead speed: approx. 5000 rpm Adjustability of the fence: 0 - 45° Motor power: 5.5 kW Dust extraction port: 160 mm Machine weight: approx. 950 kg including: toothed table lips Fpsdpfx Asz Agu Doanjp console for feed hydraulic adjustment of the planing table NEW planer guard

Condition: used, machine/vehicle number: 008744, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Fodpfsz Ig Ufsx Aanjpp Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, machine/vehicle number: 008792, Position 1: Panel Feeding and Loading LCR-FLEXPACK Fedpfx Aoz Nx E Hjanopp Position 2: Roller Conveyors LCR-FLEXPACK Position 3: Roller Conveyors LCR-FLEXPACK Position 4: Cardboard Closing Stations LCR-FLEXPACK Position 5: Robot LCR-FLEXPACK

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Fpedjx A Hggspfx Aansp Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: used, Year of construction: 1997, Sled length: 2200 mm Cutting width at the fence: 1300 mm Cutting width at the rip fence: 2200 mm Cutting depth: 100 mm Scoring blade: no Saw blade height adjustment: manual / crank Saw blade swivel adjustment: manual / crank Fence adjustment: manual Fjdez I Iu Hepfx Aanepp Saw blade angle display: digital Cutting height display: - Fence display: scale Rip fence scale display: scale Saw blade diameter: 315 mm Speeds: 1 Motor power: 4 kW Motor brake: yes - automatic Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg

Condition: used, machine/vehicle number: 008781, Position 1: Automated Warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 2: Beam panel saws with automatic warehouse IMA-CUTTING,EDGING,DRILLING LINE Position 3: CNC machine centres with automatic warehouse IMA-CUTTING,EDGING,DRILLING LINE Fjdpfx Asz Nx Hkoanepp Position 4: edge bander batch 1 IMA-CUTTING,EDGING,DRILLING LINE Position 5: CNC for Flexible Drilling IMA-CUTTING,EDGING,DRILLING LINE Position 6: Robot IMA-CUTTING,EDGING,DRILLING LINE

Condition: used, Second-hand Bütfering Optimat SWT 124 RC wide-belt sander for calibrating and sanding solid wood, veneer and varnish. Fpodpfx Aaj Ahgkdenjp Technical data: - Unit 1: Calibration unit, 15 kW - Unit 2: Combination unit, 11 kW - Working width: 1,100 mm - Workpiece height: 3–160 mm - Weight: ~ 1,800 kg

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,025 h, functionality: fully functional, machine/vehicle number: LT70LG57SDH15-3.0AC, cutting length (max.): 8,400 mm, overall weight: 3,000 kg, saw blade width: 38 mm, tooth pitch: 22 mm, cutting width (max.): 730 mm, Wood-Mizer LT70 Mobile Sawmill (Year of Manufacture 2022) - Professional sawmill with full hydraulics and 57 hp For sale is a well-equipped mobile bandsaw mill of the LT70 type. Sales brochure: UM-2026-08-31 / Wood-Mizer LT70, year of manufacture 2022, with only 1,025 operating hours. This sawmill is one of the most powerful mobile bandsaw mills in its class and is ideally suited for professional sawmills, contract cutting companies, forestry operations, and agricultural businesses with a high volume of timber. The machine features a 57 hp gasoline engine, processes logs up to 100 cm in diameter, and offers a maximum cutting length of 8.4 m, which can be extended if required. The robust tandem axle with road approval allows for flexible use directly at the customer's site or in the forest. Fpjdpfx Ao Ai Swdoanop The extensive equipment includes: Full hydraulics with loading arm, log clamp, log turner, and side supports 2 hydraulic clamping cylinders Electrically activated hydraulic valves Electric feed Electric height adjustment with AccuSet II cutting thickness calculator Wireless remote control Pre-cutter LubeMizer automatic band lubrication system Convertible to 50 mm saw blades Technical data: Manufacturer: Wood-Mizer Model: LT70 Year of manufacture: 2022 Operating hours: 1,025 h Engine: 57 hp gasoline engine Max. log diameter: 100 cm Cutting length: 8.4 m (extendable) Saw blade width: 38 mm or 50 mm Distance between blade guide rollers: 73 cm Total weight: 3,000 kg Chassis: 3.0 t tandem axle with road approval The offer includes a comprehensive technical inspection by Wood-Mizer technicians, a 1-year warranty, 2 boxes of DoubleHard saw blades, and several hours of training in Schletau (Germany). Financing is also possible. Offer price: €54,990 net (comparable new price: €86,230 net). Inspection and test cuts are possible by appointment in Schletau.

Condition: used, Machine width: 5500 mm Storage location: Supplier Fpods Ai Hr Njpfx Aansp

Condition: used, Year of construction: 1992, Working width: 530 mm Cutterhead, Z = 2 Tersa Table adjustment hydraulically via foot pedal Display for rabbet and groove joints with fold-out auxiliary fence Maximum clamping depth = rabbet depth: 16 mm Fjdpfxo Aitcye Aanspp Speed: 5000 rpm Cutterhead diameter: 125 mm Motor: 5.5 kW Dust extraction port diameter: 160 mm Dimensions: 2840 x 1300 x 1100 mm Weight: approx. 970 kg Location: Supplier

Condition: used, Belt length: 7330 mm x 150 mm, handwheel adjustment Fedpszkl Ufjfx Aanopp Storage location: Nattheim

Condition: used, Year of construction: 1984, Roller diameter: 600 mm Blade width: 25 x 6/10 mm Max. cutting height: 295 mm Cutting width: 580 mm Table height: 940 mm Table size: 860 x 600 mm Max. blade length: 4580 mm Stand side on the left Belt guide on the top and bottom Table can be tilted with parallel stop Fpodpjzb N Tujfx Aanjp Motor: 2.2 kW Dust extraction connection diameter: 100 mm Dimensions: 1210 x 750 x 2077 mm Weight: approx. 350 kg Location: Nattheim