Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm Dwodpfx Aezk Nmrsizjd - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: good (used), Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Novenco, dust extraction blower radial fan type CNA-500 DE X -Motor: Loher 4 kW 1415 rpm -Volume flow rate: 8000 m³/h -Connection: Inlet Ø 490 mm Djdpfoz Syydex Aizowd -Connection: Output 500 x 350 mm -Fan wheel: Ø 560 x 140 mm -Dimensions: 1000/770/H855 mm -Weight: 107 kg

Year of construction: 2015, condition: reconditioned (used), Used Machine Year of Manufacture: 2015 Condition: Overhauled by Aircraft factory technicians Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar Dwedoz Ek Dropfx Aizsd - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control - 1st unit: 428 operating hours - 2nd unit: 418 operating hours

Condition: new, Brush cleaning machine Fabr. Cosma Type PL 500 CU1 Dwodpfeph Sr Sjx Aizod Special version only for Ceetec expeller brushes Cleaning machines especially for Ceetec brushes used for painting and coating of solid wood workpieces A careful and min. daily cleaning of the dispelling brushes extends the life span and ensures a constant application quality. for brushes up to length 500 mm Mounting: 2x 500 mm Cleaning medium: water Stainless steel body Pneumatically operated, shaft speed adjustable Functionality: The brushes will be mounted on a shaft. This shaft is inserted into the machine. The shaft is driven pneumatically and the brushes are rotated in the water bath and moved against a scraper. At the end of the cleaning process, the water is drained off via a valve and the brushes can be removed cleaned.

Condition: used, total height: 1,800 mm, total length: 1,750 mm, total width: 1,800 mm, Year of manufacture: 2018 Colour: Grey Empty weight: 975 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 173180025 - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 4 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dwodpfxsyf Hc Ij Aizsd Yorick Diebels

Condition: used, Year of construction: 2006, Bruks drum chipper Model 820CM Year of manufacture: 2006 Dwedpoxr Trnjfx Aizjd

Condition: used, Söderhamns Rotary Debarker Cambio 85 - 66 - A Dwjdpfxsxtc Afs Aized Diameter: 10 - 66 cm Main motor: 30 kW

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Bezner round rod milling machine Working range (milling range) 30 - 120mm Dwjderfxilspfx Aizsd max. raw wood 180mm max. bracing 60mm Shortest timber length 600mm

Condition: used, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Year of manufacture: 1996 Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Dwjdpfxownh Eqe Aizod Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 4,600 mm, total height: 1,830 mm, Year of manufacture: 2006 Dimensions (LxBxH): 217 x 460 x 183 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 Djdjwnig Nopfx Aizowd - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, Used Machine Year of manufacture: 2002 Dwodpfx Aszycqvsized Features and technical specifications: - Cutting area: 4200 x 4200 mm - Maximum cutting height: 80 mm - Saw blade overhang: 92 mm - Main saw motor: 11 kW - Scoring saw motor: 2.2 kW - Total electrical power rating: 19.5 kW, 41 amps - Required air pressure: 8 bar - Exhaust capacity: 4,000 m³/h - Sawing speed, continuously variable: 0–70 m/min - Rip fence speed: 0–80 m/min (maximum output: 25 m/min) - Main saw blade: 350 x 4.4 x 30 T 72 TF - Scoring saw blade: 180 x 4.4/5.4 x 30 T 28 VR (tapered) - Weight: approx. 6,000 kg

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Dsdpfx Aiszuyh Ujzewd Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: as good as new (ex-display), Year of construction: 2025, Panhans bandsaw BSB 500 Upper and lower APA II bandsaw guides Tilting table top up to 45° Door locking system via limit switch Wheel diameter 500 mm Drive motor 1.5 kW / 2.0 hp 400 Volt motor with motor brake Band speed 1,290 m/min Maximum cutting height 320 mm Maximum cutting width 485 mm Maximum blade length 4,145 mm Table size 500x680 mm Table height 890 mm Dust extraction port 2x100mm Space requirement: 900x525x1925 mm Weight 220 kg CE compliant, GS tested Dodpfx Aiedq D I Hezjwd Available in stock at 54634 Bitburg

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) Dwodpsu R Sxxsfx Aized - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: new, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Exhibition machine- New: GLUJET GJ725 This offer includes an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Joiner milling unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feeder 1903 - Glu Jet GJ725 NC PUR PRO adhesive application system - Press unit 1912-3 pneumatic - Trimming unit 1918 pneumatic 60 mm - Multifunction milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, R 2, left-hand rotation - Diamond cutter Ø 56/60 mm, R 2, right-hand rotation - Corner copying unit FF301 MOT1 - Scraping blade unit ZK301 MOT4 incl. high-gloss package - Tungsten carbide inserts for scraping blade carrier - Chip collection box for scraping blade unit - Buffing unit 1940 - Spray device TR301 for the infeed and outfeed area - Motorized adjustment of the pressure beam - iTronic adaptive pressure and adhesive quantity control - Infeed fence long 1,252 mm - Motorized adjustment of the infeed fence - Press unit DW301 with motorized NC axis - Extraction hoods for trimming unit 1918 - Shelving program - Surface scraping blade FK701 - Spray device GM301 after the press unit Dwjdpfx Aisu R Sy Aszod - new exhibition machine -

Condition: new, Clean air dust collector AL-KO POWER UNIT 300 P -Exhibition model- Pre-separator integrated, Fire extinguishing system integrated ----- Technical data ----- Suction nozzle diameter: 300 mm, Nominal air flow rate: 5,089 m³/h, Maximum air flow rate: 6,000 m³/h, Maximum vacuum: 2,587 Pa, Filter area: 30 m², Dwedou R S A Rspfx Aizod Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, According to: GS - HO - new exhibition machine -

Condition: used, Second-hand Wegoma VS48K feed unit without stand, for professional use in woodworking. The unit ensures a smooth feed of workpieces during various machining tasks and features four rollers and eight speed settings. Dwjdpfs Agwfwsx Aizjd Technical data: - Rollers: 4 - Motor: 0.75 kW - Voltage: 400 V - Speeds: 8

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 95566, functionality: fully functional, controller model: BIESSE XP 600, working width: 1,287 mm, spindle speed (max.): 24,000 rpm, working height: 170 mm, working length: 5,920 mm, TECHNICAL DETAILS Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C and A axes: available Working areas for pendulum machining: 2 Work table: ATS-HTS-EPS Automatically positionable consoles: 10 units Stop pins per console: 2 units 5-axis milling spindle Spindle power: 9 kW / 11 kW at 60 Hz Speed: max. 24,000 rpm Tool holder: HSK-F63 Cooling: Liquid cooling Drilling head BH 26 Vertical drilling spindles: 16 units Horizontal drilling spindles in the X direction: 4 units Nut sawing units: 2 units Tool slots: 21 units Tool changer type: Chain tool changer MACHINE DETAILS UNICLAMP clamping systems: 6 units Control system: BIESSE XP 600 Motor power: 5.5 kW Conveying capacity: 244 / 286 m³/h Compressed air: 7–7.5 bar Total power: 25.3 kW Dwjdpe Ah Rhqjfx Aizsd Machine weight: 4,200 kg EQUIPMENT Automatic console positioning system EPS Pendulum machining with two working areas ATS-HTS-EPS work table Liquid-cooled 5-axis milling spindle Drilling head BH 26 Nut sawing units for X and Y directions Chain tool changer 6 UNICLAMP clamping systems Motorized conveyor belts for chips and machining waste BECKER vacuum pump Numerous vacuum suction cups Numerous HSK-63 tool holders 2 large saw blades in the tool magazine

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, No minimum price – guaranteed sale to the highest bidder! The auction includes: CEFLA FEV E dryer: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW CEFLA FEV EU dryer: AIR METER DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW CEFLA cooling zone: AIR METER COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU CEFLA TR 3000 roller conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW Note: The paint booth shown in the video is not included in the scope of sale and delivery. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Passage usable height: 80 mm Fan flow rate: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch control panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU dryer: AIR METER DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW Djdps Ah Rfrsfx Aizewd TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Passage usable height: 80 mm Fan flow rate: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch control panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA cooling zone: AIR METER COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Passage usable height: 80 mm Maximum tunnel height: 1780 mm (excluding conveyor) Maximum speed at the air meter outlet: 32.5 m/sec Supply and recirculation fan power: 3 kW Exhaust fan power: 1.5 kW Supply and recirculation fan flow rate: 6,000 m³/h Exhaust fan flow rate: 6,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats CEFLA TR 3000 roller conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Condition: new, Year of construction: 2022, functionality: fully functional, Compact line for producing open and closed wall elements. Wall length: 8400 - 1800 mm Wall height: 3300 - 2100 mm - Framing table Dwodpfxjfg Tb Ss Aized - Randek Bridge - RB3 (CAD controlled) + includes 4 tools. - Turning stations with reverse function to do closed panels.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Weinig Unicontrol 6 For sale on behalf of a customer, to be collected from site Machine can be viewed whilst still in operation Includes tools IV 77, IV 68; see PDF attachments ----- Technical Data Summary (please enquire about any additional accessories that may be included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment beam for identifying the cut section > NC length stop, mounted on slotted table, included Positioning of the crosscut saw integrated into the control system. > Length 3,500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: 3/4 (pneumatic stroke) > Tool clamping length: 320 mm > Vertical spindle stroke: > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotating spindle) ----- > Position: vertical, right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- ----- > Position: vertical, right > Number of tools: 3/4 (pneumatic stroke) Dwedpfxj Agphgo Aizod > Tool clamping length: 320 mm > Vertical spindle stroke: > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool swing: 232 mm > Motor power: 11 kW Pos. 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Number of tools: 2 > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial travel: 2 positions > Radial travel: 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical, right > Number of tools: 3 > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing radius: 210 mm > Motor power: 3.0 kW Further features ----- > Online-capable > Beveling device for tear-free beveling > Double-part package > Return conveyor for single-operator use: vane conveyor > On-screen control > Bevel window device > Electronic angle display for bevel window > Electric feed height adjustment > Industrial PC, PC control/NEXUS ----- Price of the above machine available on request! ----- Should the technical specifications of this machine not meet your requirements, please do not hesitate to contact us. Our team, with many years of experience, will be happy to assist you with any necessary adjustments or in finding a machine that meets your requirements! ----- (Technical data as provided by the manufacturer – subject to change without notice!)

Condition: used, Second-hand Bütfering Optimat SWT 124 RC wide-belt sander for calibrating and sanding solid wood, veneer and varnish. Djdps Ahgkdofx Aizewd Technical data: - Unit 1: Calibration unit, 15 kW - Unit 2: Combination unit, 11 kW - Working width: 1,100 mm - Workpiece height: 3–160 mm - Weight: ~ 1,800 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Djdpfx Aisz Ni S Dozjwd Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Transport packages: 8 pcs. Operating hours: 3,625 h

Condition: used, Leuco slotted discs or slotted cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: WP Z4 V4 - Flight circle (ø): 250 mm - Bore: 50 mm - Marking: MEC Dwsdpfs Ahpvcox Aizod - Length: 15 mm - Material: Steel

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives for woodworking. Production from a straight blank or regrinding of used knives using a template. Includes a new grinding wheel and a new cooling lubricant pump. Technical data: - Clamping length: 230 mm - Mandrel ⌀: 40 mm Dodps Ahm Ixsfx Aizjwd