Condition: used, Year of construction: 2013, workpiece width (max.): 1,200 mm, workpiece length (max.): 3,000 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, TECHNICAL DETAILS Panel thickness: min. 12 mm Panel thickness: max. 60 mm Panel length: min. 240 mm Panel length: max. 3,000 mm Panel width: min. 120 mm Panel width: max. 1,200 mm Edge thickness: min. 0.3 mm Edge thickness: max. 3 mm Feed rate: max. 25 m/min Pressure: Rubber belt Pre-milling unit Model: S2 Motor power: 3 kW Speed: 9,000 rpm Engagement: Automatically timed Number of magazine slots: 24 pcs. Glue application: EVA hot melt adhesive Pre-melter: For EVA hot melt adhesive Edge pressure: Roller unit Positioning: NC-controlled Number of processing units: 7 pcs. Cross-cut saw unit Model: HL 84 Number of motors: 2 pcs. Motor power per motor: 0.4 kW Speed: 12,000 rpm Flush trimming unit (top and bottom) Model: BF10 Number of motors: 2 pcs. Motor power per motor: 0.55 kW Speed: 12,000 rpm Edge rounding unit Model: FK 11 Number of motors: 2 pcs. Chamfering unit Fpjdpfs Aihcrox Aanep Number of motors: 1 pc. Positioning: NC-controlled Engagement: Automatically timed Scraper units Edge scraper: PN20 Joint scraper: Available Polishing unit Number of motors: 2 pcs. MACHINE DETAILS Programming software: PowerTouch PC23 Automation unit: HOMAG PROFI TBL100/20/25/F Outfeed automation: HOMAG ZHR 30/L/125/F Feed rate of outfeed automation: max. 25 m/min Panel outfeed: Via transfer roller conveyor EQUIPMENT Transfer roller conveyor for panel outfeed CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External Reference: 7694

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 4/10, functionality: fully functional, overall weight: 4,000 kg, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working width: min. 18 mm Fjdpfx Aas Aidx Aenjpp Working width: max. 230 mm Working height: min. 8 mm Working height: max. 150 mm Number of spindles: 4 pcs. Spindle speed: 6,000 rpm Spindle diameter: 40 mm Spindle 1, horizontal, bottom: 7.5 kW Spindle 2, vertical, right: 7.5 kW Spindle 3, vertical, left: 11 kW Spindle 4, horizontal, top: 11 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,850 x 1,750 mm Machine weight: 4,000 kg EQUIPMENT Outfeed table Weidner buffer table, type DBT 4500B Buffer table length: 4,500 mm Buffer table width: 1,750 mm Buffer table height: 97 mm

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.355.010, functionality: fully functional, cutting width (max.): 350 mm, saw blade diameter: 405 mm, saw blade bore: 55 mm, spindle speed (max.): 3,800 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade bore: 55 mm Saw blade diameter: min. 250 mm Saw blade diameter: max. 405 mm Cutting width: max. 350 mm Cutting height: max. 135 mm Spindle speed: max. 3,800 rpm Workpiece length: min. 650 mm Table width: 780 mm Conveyor belt motor power: 1.5 kW Conveyor belt width: 355 mm Feed rate: min. 7.5 m/min Feed rate: max. 30 m/min Fedpfx Ae Aidyrsanepp MACHINE DETAILS Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,700 mm Weight: 1,500 kg Transport packages: 1 unit

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA1/018/23, functionality: fully functional, operating hours: 12,371 h, travel distance X-axis: 5,709 mm, travel distance Y-axis: 1,650 mm, working width: 1,260 mm, milling spindle speed (max.): 20,000 rpm, working length: 5,200 mm, TECHNICAL DETAILS Working area X: 5,200 mm Working area Y: 1,260 mm Main spindle travel X: 5,709 mm Main spindle travel Y: 1,650 mm Number of workpiece consoles: 8 Drilling unit Total number of drilling spindles: 18 Vertical drilling spindles: 12 Horizontal drilling spindles: 6 Horizontal drilling spindles in the X direction: 4 Horizontal drilling spindles in the Y direction: 2 Milling spindle Motor power: 11 kW Speed: max. 20,000 rpm Tool holder: HSK-F 63 Number of controlled axes: 5 Fodpfs Ai Emhjx Aanopp MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Phases: 3 Operating hours: 12,371 h EQUIPMENT Drilling unit with 18 spindles Keyway cutter Liquid-cooled milling motor Tool changer with 16 positions Side tool changer with 8 positions PC control

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 1.328, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fpedpfx Aaj Aidvnenep Number of units: 9 Pre-milling unit Gluing unit Pressure rollers Cutting unit Rough milling unit Edge rounding unit Radius profiling unit Planing unit Brushing unit MACHINE DETAILS Voltage: 400 V Current consumption: 31.7 A Fuse rating: 35 A Connected power: 12.3 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,200 x 1,600 mm Weight: 1,550 kg Transport packages: 1 EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Tools for cutting unit Tools for rough milling unit Tools for edge rounding unit Tools for radius profiling unit Tools for planing unit Tools for brushing unit

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Fjdj Ad Igzspfx Aanepp WORK AREA Table dimensions: 900 × 770 mm Additional work table: 1,000 × 300 mm Table height adjustment: 115 mm ROUTING HEAD Speed: 10,000–20,000 min⁻¹ Swivel range of routing head: 0–60° Spindle stroke: 135 mm Spindle diameter: 85 mm MACHINE DETAILS Manufacturer: SCM Type: R9 Year of manufacture: 1977 Machine type: Overhead router Dimensions (L × W × H): 1,650 × 1,250 × 2,000 mm Weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 5921 AU, functionality: fully functional, cutting height (max.): 2,200 mm, cutting width (max.): 6,200 mm, saw blade bore: 100 mm, overall weight: 640 kg, No minimum price – guaranteed sale to the highest bidder! Vertical panel saw with scoring device! TECHNICAL DETAILS Vertical cutting height: max. 2,200 mm Horizontal cutting height: max. 2,150 mm Cutting width: max. 6,200 mm Cutting depth: max. 55 mm Horizontal cutting: Yes Vertical cutting: Yes Saw blade diameter: min. 250 mm Saw blade diameter: max. 250 mm Saw blade arbor bore: 100 mm Fsde Aidu Ropfx Aanopp MACHINE DETAILS Voltage: 400 V Current consumption: 6.3 A Fuse rating: 16 A Power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 7,200 x 1,400 x 3,000 mm Weight: 640 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA2/002546, functionality: fully functional, travel distance X-axis: 7,033 mm, travel distance Y-axis: 1,940 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 1 Number of controlled axes: 5 Spindle speed: max. 8,000 rpm Main motor power: 11 kW C-axis: Available Fpedpfx Aas Aidx Hsnop Tool holder: HSK-F63 Table design: Cantilever table Table length: 5,200 mm Table width: 1,300 mm Working area X-axis: 6,350 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Travel range X-axis: max. 7,033 mm Travel range Y-axis: max. 1,940 mm Travel range Z-axis: max. 475 mm Drilling tool: Available Motor power: 3 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 10 Tool changer positions: 24 MACHINE DETAILS Vacuum pump: Becker VTLF 250 Year of manufacture: 2008 Main motor power: 5.5 kW Capacity: 300 m³/h Connection diameter: 70 mm Oil-free: Yes Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Installed length: 11,000 mm Installed width: 3,900 mm Installed height: 3,000 mm Transport weight: 6,600 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 95566, functionality: fully functional, controller model: BIESSE XP 600, working width: 1,287 mm, spindle speed (max.): 24,000 rpm, working height: 170 mm, working length: 5,920 mm, TECHNICAL DETAILS Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C and A axes: available Working areas for pendulum machining: 2 Work table: ATS-HTS-EPS Automatically positionable consoles: 10 units Stop pins per console: 2 units 5-axis milling spindle Spindle power: 9 kW / 11 kW at 60 Hz Fpsdpfs Ah Rhqjx Aansp Speed: max. 24,000 rpm Tool interface: HSK-F63 Cooling: Liquid cooling Drilling head BH 26 Vertical drilling spindles: 16 units Horizontal drilling spindles in X-direction: 4 units Nut sawing units: 2 units Tool positions: 21 units Tool changer type: Chain tool changer MACHINE DETAILS UNICLAMP clamping systems: 6 units Software: Windows 10, Biesse Works, NC-HOPS license Motor power: 5.5 kW Conveying capacity: 244 / 286 m³/h Compressed air: 7–7.5 bar Total power: 25.3 kW Machine weight: 4,200 kg EQUIPMENT Automatic console positioning system EPS Pendulum machining with two working areas ATS-HTS-EPS work table Liquid-cooled 5-axis milling spindle Drilling head BH 26 Nut sawing units for X and Y directions Chain tool changer 6 UNICLAMP clamping systems Motorized conveyor belts for chips and machining waste BECKER vacuum pump Numerous vacuum suction cups Numerous HSK-63 tool holders 2 large saw blades in the tool magazine

Condition: used, Year of construction: 2010, TECHNICAL DETAILS Working area, X-axis: 4,600 mm Working area, X-axis, edge processing: 3,730 mm Fedo Aihynopfx Aanopp Working area, Y-axis: 1,535 mm Working area, Y-axis, edge processing: 1,500 mm Panel thickness: max. 225 mm Number of processing stations: 4 Number of rails: 8 Drilling unit Number of vertical drilling spindles: 29 Number of horizontal drilling spindles, X-axis: 8 Number of horizontal drilling spindles, Y-axis: 4 Total number of drilling spindles: 41 Milling spindles Number of milling spindles: 2 Number of controlled axes per milling spindle: 4 Motor power per milling spindle: 12 kW Edge processing Panel height: min. 14 mm Panel height: max. 60 mm Number of edge magazine positions: 4 Horizontal electric spindle Number of outlets: 1 Motor power: 3.5 kW Number of tool positions: 22 EQUIPMENT Console and rail table Drilling unit on top 2 milling spindles on top Automatic tool changer Gluing unit on the main beam of the machine Hot-melt adhesive tank Edge roller magazine with 4 positions Fixed grooving unit on top for grooves in the X-direction Horizontal electric spindle with CNC-controlled positioning Side tool magazine with 22 tool positions Vacuum pump Chip conveyor BiesseWorks Advance programming software Front safety mats CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8804

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 123-2001, functionality: fully functional, planing width: 260 mm, rotational speed (max.): 6,000 rpm, planing height: 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 5 units Spindle 1 Spindle type: Horizontal spindle Motor power: 5.5 kW Spindle diameter: 120 mm Milling cutter speed: 6,000 rpm Milling cutter block diameter: max. 150 mm Spindle 2 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 140 mm Milling cutter speed: 6,000 rpm Milling cutter block diameter: max. 160 mm Fjdpo Aidynjfx Aanspp Spindle 3 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 120 mm Milling cutter speed: 6,000 rpm Milling cutter block diameter: max. 160 mm Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 120 mm Milling cutter speed: 6,000 rpm Milling cutter block diameter: max. 160 mm Spindle 5 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 140 mm Milling cutter speed: 6,000 rpm Milling cutter block diameter: max. 160 mm Milling width: max. 260 mm Milling height: max. 120 mm Infeed table length: 2,470 mm Diameter of feed rollers: 140 mm Feed motor power: 2.2 kW Feed drive: Cardan shaft drive Lubrication system: Manual Diameter of dust extraction nozzle: 140 mm Tool type: Standard MACHINE DETAILS Voltage: 380 V Current consumption: 84 A Fuse rating: 100 A Power: 39.0 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,700 x 1,650 mm Weight: 2,500 kg Transport packages: 1 unit EQUIPMENT Documentation Tools

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 250 kW (339.91 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine type: Complete grinding system (dry chip mill, hammer mill) Throughput capacity: 12 t/h MACHINE DETAILS Drive power: 250 kW Power consumption: 430 A EQUIPMENT Magnetic separator Heavy particle separator Scheuch top-mounted filter Fpedo Ah Dzpopfx Aanop Collection trough with discharge screw conveyor from Knoblinger Steel structure

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 6,000 kg, controller model: Xilog Plus, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 80 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X: 3,000 mm Working area Y: 1,300 mm Working area Z: 80 mm Independent CNC drilling heads: 2 units Main drilling head Vertical spindles X: 15 units Vertical spindles Y: 19 units Horizontal spindles X: 4 units Auxiliary drilling head Vertical spindles X: 11 units Vertical spindles Y: 3 units Horizontal spindles X: 4 units Upper milling unit Milling power: 6.6 kW Tool holder: HSK-F63 Speed: 24,000 rpm Lower milling unit Fodo Ah Rk Njpfx Aanspp Milling power: 6.6 kW Tool holder: HSK-F63 Speed: 24,000 rpm MACHINE DETAILS CNC control: Xilog Plus EQUIPMENT Additional horizontal spindles Integrated drilling heads for concealed hinge systems DXF import Parametric programming Tool management Automatic workpiece thickness measurement Patented CNC workpiece clamping system Automatic workpiece repositioning Automatic central lubrication Loading and unloading table

Condition: used, Year of construction: 2014, power: 22 kW (29.91 HP), edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Feed speed: max. 18 m/min Panel height: min. 10 mm Panel height: max. 60 mm Panel width: min. 70 mm Edge thickness: min. 0.4 mm Fede Aihdlopfx Aanspp Edge thickness: max. 12 mm Number of processing units: 9 Pre-milling unit Number of units: 1 Motor power: 2.2 kW Edge magazine and gluing Number of magazine positions: 1 Number of pressure rollers: 4 Edge processing units Number of edge processing units: 7 Cutting unit Number of motors: 2 Motor power per motor: 0.35 kW Flush trimming and rounding unit Number of motors: 2 Motor power per motor: 0.55 kW Corner rounding unit Number of motors: 2 Motor power per motor: 0.35 kW Grooving unit Number of motors: 1 Motor power: 3.5 kW Buffing unit Number of motors: 2 Motor power per motor: 0.18 kW MACHINE DETAILS Total connected power: 22 kW EQUIPMENT Processing of thin edges Processing of thick edges Processing of solid wood edges EVA hot melt adhesive system AIRTEK hot air system Overpressure with idle rollers Panel support guides Pre-milling unit with automatic, time-controlled operation Edge roller magazine EVA glue reservoir EVA pre-melter Set of pressure rollers with 4 pressure rollers NC positioning of pressure rollers Cutting unit Flush trimming and rounding unit with NC positioning Corner rounding unit WD60 Grooving unit Edge pulling unit with NC positioning Glue pulling unit Buffing unit Spray unit Machine programming software PowerControl PC20 CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 7517

Condition: used, Year of construction: 2008, edge thickness (max.): 20 mm, feed rate X-axis: 24 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Edge types: Thin edge, thick edge, solid wood Fsdo Aihc Sjpfx Aanspp Edge thickness: min. 0.3 mm Edge thickness: max. 20 mm Feed rate: max. 24 m/min Number of processing units: 8 units Number of edge processing units: 6 units Panel thickness: min. 12 mm Panel thickness: max. 60 mm Panel width: min. 55 mm Overpressure: Present Overpressure design: Rubber belt Panel support guides: Present Positioning of panel support guides: NC-controlled Pre-milling unit Number: 1 unit Automatic time-controlled engagement: Present Motor power: 3 kW Speed: 9,000 rpm Gluing Glue system: EVA hot melt adhesive Glue reservoir for EVA hot melt adhesive: Present Pre-melter for EVA hot melt adhesive: Present Pre-melter model: HOT MELT A34 Edge magazine: Present Magazine positions: 2 units Pressure rollers: 7 units End capping unit Model: HL 81 Number of motors: 2 units Motor power per motor: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 units Motor power per motor: 1.5 kW Speed: 12,000 rpm EQUIPMENT Pre-milling unit Corner rounding unit End capping unit HL 81 Flush trimming unit, top and bottom NC-positionable panel support guides Overpressure with rubber belt Edge magazine with 2 positions EVA glue reservoir EVA pre-melter HOT MELT A34 7 pressure rollers Preheating lamps for panel sides The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing and use of the machine at the destination. External reference: 4592

Condition: used, Year of construction: 2016, workpiece height (max.): 60 mm, edge thickness (max.): 5 mm, feed rate X-axis: 12 m/min, TECHNICAL DETAILS Workpiece Machining Min. panel thickness: 8 mm Max. panel thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 5 mm Max. feed rate: 12 m/min Positioning: NC-controlled Units Number of edge machining units: 6 Pre-milling unit Automatic, time-controlled engagement Cutting unit Number of motors: 1 Motor power: 0.8 kW Speed: 12,000 min⁻¹ Flush-milling and rounding unit Number of motors: 2 Motor power per motor: 0.65 kW Speed: 12,000 min⁻¹ Corner rounding unit Number of motors: 2 Motor power per motor: 0.65 kW Fode Aihcyjpfx Aanopp Speed: 12,000 min⁻¹ Edge pulling unit Gluing unit Polishing unit Number of motors: 2 Motor power per motor: 0.25 kW Speed: 1,350 min⁻¹ MACHINE DETAILS Control Operating system: Windows Programming software: SINTRA Safety standard CE marking EQUIPMENT Pressure unit with idler rollers Panel support guides NC positioning Edge roller magazine Glue reservoir for EVA hot melt adhesive Pressure rollers for edges Spray unit

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, No minimum price – guaranteed sale to the highest bidder! The auction includes: CEFLA FEV E dryer: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW CEFLA FEV EU dryer: AIR METER DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW CEFLA cooling zone: AIR METER COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU CEFLA TR 3000 roller conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW Note: The paint booth shown in the video is not included in the scope of sale and delivery. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Passage usable height: 80 mm Fan flow rate: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch control panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU dryer: AIR METER DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Passage usable height: 80 mm Fan flow rate: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch control panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA cooling zone: AIR METER COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Fpsdpfx Aaj Ah Rfrjnop Passage usable height: 80 mm Maximum tunnel height: 1780 mm (excluding conveyor) Maximum speed at the air meter outlet: 32.5 m/sec Supply and recirculation fan power: 3 kW Exhaust fan power: 1.5 kW Supply and recirculation fan flow rate: 6,000 m³/h Exhaust fan flow rate: 6,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats CEFLA TR 3000 roller conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Condition: used, Year of construction: 2005, power: 23 kW (31.27 HP), travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,900 mm, TECHNICAL DETAILS Working area X-axis: 3,390 mm Working area Y-axis: 1,570 mm Travel range X-axis: 4,400 mm Travel range Y-axis: 1,900 mm Panel passage: max. 250 mm Number of processing stations: 2 Number of controlled axes: 4 Feed rate X-axis: 80 m/min Feed rate Y-axis: 80 m/min Feed rate Z-axis: 25 m/min Number of rails: 8 Number of vacuum cups: 24 Drilling unit Number of vertical drilling spindles: 22 Number of horizontal drilling spindles X-axis: 6 Number of horizontal drilling spindles Y-axis: 4 Total number of drilling spindles: 32 Milling spindle Number of controlled axes: 4 Motor power: 13.5 kW Speed: 18,000 rpm Grooving unit Tool diameter: max. 120 mm Motor power: 1.7 kW Speed: 6,500 rpm Horizontal electro-spindles Number of outputs: 2 Motor power: 3.5 kW Speed: 12,000 rpm Number of tool positions: 10 MACHINE DETAILS Suction capacity of vacuum pump: 250 m³/h Total connection power: 23 kW EQUIPMENT Console and rail table CNC-controlled positioning of the rails CNC-controlled positioning of the vacuum cups Fodpfx Ae Aihdtoanjpp Vacuum pump Drilling unit, top Milling spindle, top Automatic tool changer Fixed grooving unit in X-direction Horizontal electro-spindles Tool magazine at the rear of the machine Chip conveyor Windows control system BiesseWorks programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing and use of the machine at the destination. External reference: 8377

Condition: used, Year of construction: 2013, travel distance X-axis: 3,300 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, TECHNICAL DETAILS Working area, X-axis: 3,140 mm Working area, Y-axis: 1,560 mm Travel distance, X-axis: 3,300 mm Travel distance, Y-axis: 2,000 mm Number of controlled axes: 3 Milling spindle Number of controlled axes: 3 Number of tool positions: 16 MACHINE DETAILS Number of vacuum pumps: 2 Suction capacity per vacuum pump: 250/300 m³/h EQUIPMENT Flat table Milling spindle on top Automatic tool changer Liquid cooling for the milling spindle Tool magazine on the rear of the machine Fpedpfe Aihdwsx Aanjp Vacuum pumps FANUC panel control CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8497

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, grinding width: 1,300 mm, overall weight: 4,200 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: max. 80 mm Workpiece thickness: min. 3 mm Drive power: 2.5 kW Feed rate: 4.5–22 m/min Feed rate control: stepless Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between guide rollers: 40 mm Workpiece vacuum clamping system Fan power: 5.5 kW Operating side: left Operator terminal: graphical Operating voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,550 x 2,220 x 2,300 mm Fjdpfxj Ah Rt Hj Aanopp Weight: approx. 4,200 kg EQUIPMENT Suitable for intermediate sanding of coated surfaces, wood smoothing, and film sanding Transport table with individual conveyor belts Refurbished conveyor belt Steplessly adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Stepless electronic sanding belt speed control via frequency inverter Wear-free braking system Pneumatic sanding belt tensioning Intermittent belt dust extraction system Infrared belt control Graphical operator terminal for entering machine setting values Numerical thickness adjustment Fault source display Workpiece throughput display Feed rate display Electronically controlled pressure bar with automatic adjustment of the contact surfaces to the workpiece shape Workpiece vacuum clamping system with fan

Condition: used, Year of construction: 2006, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Panel thickness: max. 50 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3.0 mm Feed rate: max. 11 m/min Number of panel processing/milling units: 1 unit Number of edge processing units: 5 units Pre-milling unit Motor power: 2.2 kW Speed: 1,600 rpm Cut-off saw unit Motor power: 0.18 kW Speed: 12,000 rpm Fjdpfx As Aihdaeanepp Rough milling unit, top and bottom Motor power: 0.27 kW Speed: 12,000 rpm Edge rounding unit Number of motors: 1 unit Motor power: 0.35 kW Speed: 12,000 rpm Edge pulling unit Polishing unit Number of motors: 2 units Motor power: 0.10 kW Speed: 2,700 rpm MACHINE DETAILS Control system: PC 16 EQUIPMENT Pressure roller with idler rollers Edge roller magazine Glue pot for EVA hot-melt adhesive CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8555

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, grinding width: 1,300 mm, overall weight: 5,500 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: min. 3 mm Workpiece thickness: max. 140 mm Sanding system: CSD Drive power: 3.0 kW Feed rate: 4.5–22 m/min Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Cross sanding unit Sanding belt length: 4,900 mm Sanding belt width: 150 mm Sanding belt speed: 12 / 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit Sanding belt length: 2,620 mm Fpsdpj Ah Rxcefx Aanop Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between idler rollers: 40 mm Sanding system: CSD Operator terminal: graphic Dimensions & Weight Dimensions (L x W x H): approx. 2,550 x 2,675 x 2,400 mm Weight: approx. 5,500 kg EQUIPMENT Cross and longitudinal sanding units for sanding veneer and other materials before coating CSD sanding system Conveyor bed with individual conveyor belts Refurbished conveyor belt Adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Wear-free braking systems Pneumatic sanding belt tensioning Belt running monitoring Pressure pad belt system Intermittent belt extraction systems Stepless electronic sanding belt speed control via frequency converter Infrared belt control, graphic operator terminal for entering machine settings Numerical thickness adjustment Fault source indicator Workpiece throughput indicator Feed rate indicator Electronically controlled pressure bar for free, multi-track infeed Automatic adjustment of the pressure bar contact surfaces to the workpiece shape

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading period: December 1st to December 10th. TECHNICAL DETAILS Load capacity: 1,000 kg Storage area Length: 1,250 mm Width: 800 mm Fedpfx Aae Advd Uonjpp MACHINE DETAILS Manufacturer: Kruse Type: M1000 Year of manufacture: 1999 Manufacturing number: 20,390 Machine dimensions Length: 1,250 mm Width: 800 mm Height: 400 mm Weight: 125 kg

Condition: used, Year of construction: 2007, conveying length: 5,700 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 800 mm, No minimum price – guaranteed sale to the highest bidder! Fjds Aihqfopfx Aanjpp TECHNICAL DETAILS Plate width: max. 800 mm Plate length: min. 140 mm Plate length: max. 2,000 mm Conveyor length: 5,700 mm Width: 1,000 mm EQUIPMENT Motorized conveyor belt Plate return system for edge banding machine on the left Plate ejection via air nozzle bank CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6200

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Festo Type: PP Machine number: 6,237 Machine type: Chain feeder Electrical Data Operating voltage: 220–380 V Connected power: 2.2 kW Drive Data Fpjdpfx Aae Adu A Asnop Speed: up to 2,800 rpm Working Area Chain width: approx. 50 mm MACHINE DETAILS Dimensions Length: 800 mm Width: 700 mm Height: 1,500 mm Weight Weight: 200 kg