Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Lajdovuucqjpfx Ag Njh Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Ledei Amnpopfx Ag Noah Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Ljdpfx Aoxgv Nfjg Nsah Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: used, Year of construction: 1964, pressure 10 t throat 235 mm stroke ca. 400 mm stroke speed - idle stroke downwards 4,5 m/min stroke speed - idle stroke upwards 10 m/min dayligth ca. 500/600 mm table-size ca. 450 x 400 mm ram hole 32 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,95 x 0,45 x 2,1 m Hydraulic single-column press - from a training workshop, no guarantee on UVV, Lodpfx Agovgnqfo Njah with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1981, total height: 2,300 mm, total width: 1,100 mm, total length: 2,000 mm, Empty weight: 500 kg Price: On request - Year: 1981 - Documentation available: No - Table width: 505mm - Throat depth: 250mm - Table length: 710mm - Ram width: 280mm Lajdpfoxhcgysx Ag Noh - Ram length: 450mm - Power: 63.0ton - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Lasdpohl Npqsfx Ag Nsh Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: used, Year of construction: 1979, pressure 1000 t distance between columns 3030 mm stroke 350 mm Distance table/ram, max. stroke up, adjustment up 1400 mm table surface area 3000 x 2000 mm table height over floor 430 mm side window 1450 x 1400 mm ram surface 3000 x 2000 mm speed down 300 mm/s speed up 340 mm/s working speed 18 - 44 mm/s return capacity 120 t oil volume 4400 l width with platform 4950 mm power capacity 2 x 90,0 + 10,0 kW Laodpfx Aovuk I Ajg Njh weight 87,0 t Dimensions (WxDxH) 4,35 x 3,65 x 7,55 m height over floor 6,05 m height beneath floor 1,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, speed adjustable, ram interlocking, two-hand operation stored in partly dismantled condition - as is where is, WITHOUT putting into operation

Condition: used, functionality: fully functional, throat depth: 130 mm, pressing force: 60 t, overall weight: 925 kg, stroke length: 50 mm, Pressure, tn: 60 Throat/reach: 130 mm. Table size: 250 x 225 mm. Ledpfx Agoxphtbj Neah Stroke: 50 mm. Motor: 11 kW./15 HP. Country of origin: Denmark. Year: 2000 Size (L x W x H): 800 x 900 x 1600 mm. Weight: 925 kg. Max tool height: 220 mm. Working pressure: 200 bar. All our machines are tested and serviced before delivery.

Condition: ready for operation (used), Year of construction: 1988, Immediately available from location: CNC press brake Fasti Laedoxqbnuspfx Ag Njh Type 902 125/30 Year of manufacture: 1988 CNC control: Delem DA 23 e Pressing force: 125 t Working length: 3,100 mm Distance between uprights: 2,550 mm Stroke: 355 mm Throat depth: 300 mm Complete set of tools Weight: 8 t Price: EUR 7,500.— plus VAT, ex location

Condition: used, pressure 6 t dayligth 180 mm spindle diameter 32 mm throat 115 mm ram stroke 90 mm table surface area 300x270 mm weight of the machine ca. 70 kg Lsdevgnnwepfx Ag Njah dimensions of the machine ca. 800 x 1350 mm 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m².

Condition: used, Manual folding machine Schuller MAH 2-2000, working width 2030 mm, sheet thickness 2.0 mm Lodpfxjxn Avnj Ag Neah

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Ledpfxegp T Eus Ag Neah Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t Laedpfowmf Tvex Ag Neh ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, functionality: fully functional, throat depth: 130 mm, pressing force: 45 t, overall weight: 900 kg, stroke length: 35 mm, Pressure, tn: 45 Throat/reach: 130 mm. Table size: 250 x 225 mm. Stroke: 35 mm. Motor: 11 kW./15 HP. Country of origin: Denmark. Size (L x W x H): 800 x 900 x 1600 mm. Lodpexphrqefx Ag Noah Weight: 900 kg. Max tool height: 220 mm. Working pressure: 200 bar. All our machines are tested and serviced before delivery.

Condition: ready for operation (used), Year of construction: 1965, Immediately available ex site: Hydraulic C-frame press WMW Zeulenroda Type PYE 160 S Lajdpjxqblysfx Ag Nsh Year of manufacture: 1965 Completely overhauled in 2006 Press force: 160 t Table: 900 x 620 mm Distance table – ram: 800 mm Ram stroke: 500 mm Ram down (rapid traverse): 200 mm/s Ram up: 125 mm/s Drive: 17.5 kW Weight: 8.5 t Price: EUR 4,000—plus VAT, ex site

Condition: as good as new (ex-display), The SHP 200 is a robust workshop press designed for professional use within the category of Workshop Presses. Built with a torsionally rigid welded gantry-style frame made from thick-walled sectional steel, this hydraulic workshop press ensures stability and performance during various applications, such as pressing in and out bearings, assembly, and straightening work. Its finely adjustable press force, able to exert up to 200 tons, along with a 400 mm stroke, makes it highly versatile for tasks involving axles, supports, and shafts. The movable working cylinder allows lateral positioning for easier set-up without needing to move the workpiece, while a height-adjustable worktable and safety bolts enhance operational safety. Operators can easily monitor the press's working pressure, thanks to a convenient gauge. KNUTH's SHP 200 workshop press stands as an indispensable tool in technical workshops and maintenance departments. To experience its capabilities, order now. Lajdpfsuyg Adjx Ag Neh

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, Technical Data – Solidturn 200/1500 B – Universal Lathe Working Area Distance between centers 1500 mm Max. turning diameter over bed 400 mm Max. turning diameter over carriage 225 mm Max. turning diameter over gap 530 mm X-axis travel 330 mm Z1-axis travel 130 mm Gap length 320 mm Bed width 330 mm Lsdewuvacepfx Ag Neah Cross slide swivel range 360° Main Spindle Speed range (15) 22 – 2000 rpm Spindle bore 85 mm Spindle mount Camlock D1-6 Spindle taper MT 5 Feed Feed X-axis 0.036 – 2.019 mm/rev Feed Z-axis 0.072 – 4.036 mm/rev Thread Cutting Metric thread cutting 0.5 – 28 mm Diametral thread cutting 8 – 56 mm Module thread cutting 0.5 – 3.5 mm Whitworth thread cutting 1 – 56 TPI Tailstock Tailstock quill diameter 65 mm Tailstock taper MT 5 Tailstock quill stroke 120 mm Tailstock lateral adjustment ± 5 Drive Power Main spindle motor power 7.5 kW Supply voltage 400 V Dimensions and Weights Dimensions 2920 x 1150 x 1800 mm Weight 2240 kg

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm Lodpfx Agsu Icwgo Nsah voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm Lasdpfxevuubgj Ag Nsh pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 The press has a table size of Length Width Thickness 1000 390 60 mm Cylinder stroke: 400 mm The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Lasdpfsxl Tmfjx Ag Nsh Max. Pressing force: 60 tons 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Motor power: 4 kW Two-hand control Emergency stop Foot pedal Stroke limitation via limit switch

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Edelhoff Hydraulic Single Column Press Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Lsdpfx Agjxqbfyj Neah Pressure capacity 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Weight 6 tons Price: €5,000 plus VAT, ex location

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm Lodsu Nfh Dopfx Ag Neah This press is currently for sale without controls. Optional on customer request completion possible. i.D. *

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s Laodpfov Svarjx Ag Njh power requirement 145,0 kW Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements

Condition: used, Technical details: Laedpfsvc Awxjx Ag Noh pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Ledpfx Agewvva Sj Njah