Condition: new, Year of construction: 2025, functionality: fully functional, 125 T C-Frame Servo Press with 50 T Ejector, DUPLOMATIC Hydraulics Reduced power consumption by up to 40% compared to conventional motors, thanks to servo-hydraulics. TECHNICAL DATA: - Press capacity: 20–125 T (adjustable) - Maximum installation height: 1000 mm - Usable table surface: 2200 x 750 mm - Usable ram surface: 980 x 750 mm - Ejector cylinder capacity: 50 T - Ejector cylinder stroke: 200 mm - Frame type: C-frame - Guide column diameter: Ø 100 mm (4 pieces, in corners) - Table height from floor: 870 mm - Overall dimensions approx. (W x D x H): 2400 x 2000 x 3300 mm - Approx. total weight: 8,700 kg - Clamping device for die centering: 50 mm diameter - Prepared for vibration dampening plates: 30 mm - Prepared for ROBO connection: yes HYDRAULIC CYLINDER: - Piston stroke: 0–700 mm (adjustable) - Max. operating pressure: 245 bar - Return speed: 300 mm/sec - Ram speed under load up to 25%: 25 mm/sec - Ram speed under load up to 50%: 14 mm/sec - Ram speed under load up to 80%: 7 mm/sec - Ram speed under load up to 100%: 6 mm/sec - Idle speed: 300 mm/sec HYDRAULIC POWER UNIT: - SERVO hydraulic pump (brand: DUPLOMATIC): 143 L/min (1 piece) - SERVO motor power: 15 kW (1 piece) Djdpfox Aqtqox Aflscr - Pressure accuracy during pressing stroke: +/- 5 bar - Pre-fill valve: NG-160

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Dcjdpowiwpusfx Afljr

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Dcjdjw A Srwepfx Aflsr Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: good (used), Year of construction: 1989, functionality: fully functional, Revision 1989 Pressing force: 2x200 kN, Strokes: 40 - 300 strokes/min. Stroke: 50 mm, Clutch: pneumatic, Power supply: 380 V, Djdpfoxx T Hfsx Afljcr Machine weight: 2,200 kg, additional ejector, factory version with reinforced design

Condition: new, The KNWP H 100 is a robust Motorized Workshop Press, part of the Workshop Presses category by KNUTH. This hydraulic workshop press features a torsionally rigid welded gantry-style frame, making it ideally suited for professional use in technical workshops and maintenance departments. Its stable portal design includes an adjustable open support table that allows for versatile applications, such as pressing in and out bearings, assembly work, and testing workpieces. The press boasts a finely adjustable press force of up to 100 tons and a long piston stroke of 400 mm, ensuring efficiency and adaptability for various tasks. Operators can monitor the current working pressure via the built-in gauge, while the horizontal adjustment of the working cylinder simplifies setup without needing to reposition the workpiece. To enhance reliability, the KNWP H 100 is equipped with premium components and includes a motorized hydraulic drive, movable working cylinder, and height-adjustable work table. For anyone seeking a dependable Motorized Workshop Press, the KNWP H 100 is an excellent choice—request a quote today to add this essential tool to your lineup. Dedpfjuyh A Eox Aflecr

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm Dodpfx Ajvzxttofljcr with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic press with adjustable capacity from 3 to 20 tons, regulated via rotary dial a) Robust machine frame b) Control cabinet technology from renowned manufacturers c) Pump by German manufacturer Agro-Hytos or equivalent supplier d) Press table dimensions: 1000x400x40 mm e) Table height: 940 mm from factory floor f) Ram size: round, 250 mm diameter, replaceable g) Emergency stop switch h) Maximum distance between table plate and ram: 500 mm i) Cylinder stroke: 500 mm j) Motor power: 2.2 kW k) Oil tank for 60 L hydraulic oil l) Downward travel speed 2-10 mm/s (adjustable via rotary dial), upward 20 mm/s m) Total weight approx. 1200 kg n) Coating: RAL 7035 (Light Grey) and RAL 2009 (Orange) o) Assembly, commissioning, and instruction available at extra charge Dcedpfx Afox Ap Utjler p) CE declaration and German-language documentation

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 930 mm stroke 200 mm Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l Dedpfxjvuk Trj Afljcr power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Technical specifications Dedpsx Ap Itofx Aflscr Tonnage: 300 T Clear span between uprights: 2,100 mm Stroke of cylinder: 600 mm Maximum distance between heating plates: 800 mm Heating plate dimensions: 1,800 x 1,100 mm Table height from floor, incl. damping plates and heating plate: 800 mm Overall height approx.: 3,600 mm Width approx.: 3,800 mm Depth approx.: 1,870 mm Weight approx.: 22,000 kg Hydraulic power unit by BOSCHREXROTH Hydraulic pump by BOSCHREXROTH: 105 L/min 22 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Return speed: 150 mm/sec Alternative: Hydraulic power unit by DUPLOMATIC Hydraulic pump DAIKIN HYBRID-SERVO: 130 L/min 15 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Return speed: 150 mm/sec Two-hand control Ram return by pressing the blue button Stroke limitation via Leuze measuring rod and monitor Fixed lower table with T-slots (X-direction): 2,100 x 1,100 mm Ram with T-slots (X-direction), size: 1,900 x 1,100 mm CE certificate and user manual: Included in delivery

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm Dcsdpfsvuk Szox Afler table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s working speed 320 mm/s oil volume 450 l power requirement 15,5 kW weight 8,0 t dimensions (WxDxH) 2,8 x 2,6 x 4,85 m hydraulic fast-stroke trimming press for die-cast parts with oilhydraulic drive, hydraulic shifting devices (4x), hydraulic blank holder in BDC / ejector in TDC in ram, ram interlocking device table surface 1340 x 705 mm or 930 x 1084 mm ram surface 1230 x 705 mm or 930 x 990 mm Insert plate in table with opening 320 x 260 mm as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table Dedpfx Afexrb Nbelocr - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: used, Year of construction: 1987, Pressure 080 t throat 380 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 472 mm table surface area 840 x 610 mm Dcodsvuk Snepfx Afljr table height over floor 800 mm passage to the back 520 mm ram surface 650 x 400 mm ram adjustment 70 mm power capacity 7,5 kW weight 6,9 t Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, mechanical overload protection in ram, tie rods to improve rigidity of the press body, two-hand operation as is where is, WITHOUT electrical cabinet / WITHOUT additional work The putting into operation in our warehouse (with new control) / Safety adaptations / mechanical overhaul can be offered additionally on request

Condition: used, Year of construction: 1988, pressure 100 t distance between columns 1180 mm stroke 1 - 120 mm no. of strokes 90 /min distance table/ram, stroke up 470 mm table surface area 1100 x 700 mm table height over floor 800 mm side window 400 mm ram surface 740 x 350 mm ram adjustment 100 mm power requirement 37,0 kW weight 11,0 t dimensions (WxDxH) 2,3 x 2,0 x 3,5 m Djdpfx Afovzxtaolscr difference-way press with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request T-slots in table and ram according to customer's specification - price on request

Condition: used, Year of construction: 1969, pressure 050 t throat 260 mm stroke 8 - 120 mm no. of strokes 100 /min Dsdpjvzxr Njfx Afljcr distance table/ram, max. stroke up, adjustment up 410 mm table surface area 650 x 500 mm hole in the table 250 x 180 mm table height over floor 740 - 980 mm table adjustable 240 mm ram surface 400 x 180 mm ram adjustment 70 mm power requirement 2,2 kW weight 2,3 t dimensions (WxDxH) 1,2 x 1,4 x 2,3 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1977, pressure 050 t throat 255 mm stroke 8 - 120 mm no. of strokes 115 /min Djdjvzxr Ajpfx Aflscr distance table/ram, max. stroke up, adjustment up 380 mm table surface area 640 x 500 mm hole in the table 250 x 180 mm table height over floor 710 - 930 mm table adjustable 220 mm ram surface 550 x 170 mm ram adjustment 70 mm power requirement 4,0 kW weight 3,1 t dimensions (WxDxH) 1,5 x 1,5 x 2,3 m year of manufacture 1951 - modernized 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1998, Pressure 63 t distance between columns 1000 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 850 mm table surface area 980 x 500 mm table height above floor 850 mm ram surface 130 mm speed down 400 mm/s speed up 461 mm/s Dcsdpfxevzxrve Afler working speed 14 - 97 mm/s power requirement 15,0 kW Weight 5,0 t Dimensions (WxDxH) 2,0 x 1,6 x 3,9 m with oil-hydraulic drive, controllable dependent on pressure, mechanical depth stop No foundation pit necessary as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s Dcodpjvzxrpjfx Aflor feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1968, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 645 x 510 mm Dcodevzxriepfx Afljr hole in the table 250 x 180 mm table height over floor 700 - 930 mm table adjustable 230 mm ram surface 220 x 185 mm ram adjustment 70 mm power requirement 3,0 kW weight 3,0 t dimensions (WxDxH) 1,1 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Dcedpevzxq Sofx Afler with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: used, Year of construction: 1979, pressure 18 t diameter 250 mm stroke 150 mm distance between columns 210 mm max. distance table - ram 400 mm power capacity 5,5 kW Dodpfovzxp Ijx Afljcr weight of the machine ca. 1,1 t dimensions of the machine ca. 1,0 x 1,0 x 1,8 m hydraulic die-hob press with oil-hydraulic drive, controllable dependent on pressure/time as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1977, pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 56 / 84 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 710 x 500 mm hole in the table 320 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,1 t dimensions (W x D x H) 1,35 x 2,0 x 2,6 m year of manufacture 1964 - installation of moving screen 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor for two speed, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual centralized lubrication, foot operation as is where is, WITHOUT putting into operation / WITHOUT additional work The putting into operation in our warehouse / Safety adaptations / mechanical overhaul / new electrical control can be offered additionally on request Dedpsvuk Rkefx Aflscr

Condition: used, pressure 5 t throat 150 mm stroke 40 mm no. of strokes 0 - 80 /min distance table/ram, max. stroke up, adjustment up 260 mm Dcedpfx Afevuuk Uolor table surface area 340 x 270 mm hole in the table 45 mm table height over floor 780 mm table adjustable 120 mm ram surface 60 mm weight 0,3 t dimensions (WxDxH) 0,4 x 0,8 x 1,4 m pneumatic knuckle-joint press permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with pneumatic driven knuckle-joint system, speed down adjustable, manual stroke adjustment, adjustable table, foot operation, electro-pneumatic control can be inspected in provisorical running condition in our warehouse (see video)

Condition: used, Year of construction: 1991, pressure 150 t distance between columns 300 mm stroke 180 mm Dedpfxjvuuiwo Aflocr distance table/ram, max. stroke up, adjustment up 300 mm table surface area 570x180 / 300x410 mm table height over floor 875 mm side window 180 mm ram surface 180 mm speed down 250 mm/s speed up 160 mm/s working speed 6 - 12 mm/s oil volume 250 l power requirement 11,0 kW weight 2,4 t dimensions (WxDxH) 1,3 x 1,3 x 2,4 m year of manufacture 1972 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 2011, pressure 120 t distance between columns 430 mm stroke 125 mm distance table/ram, stroke up 400 mm table surface area 430 x 450 mm table height over floor 860 mm side window 230 mm ram surface 250 mm working speed 10 mm/s power requirement 11,0 kW weight 2,5 t dimensions (WxDxH) 1,6 x 1,3 x 2,4 m permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, moving screen, two-hand and foot operation No foundation pit necessary can be inspected in running condition in our warehouse Dcsdpfx Aovuuhteflor

Condition: used, Year of construction: 1990, pressure 100 t throat 300 mm stroke 20 - 120 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 800 x 560 mm hole in the table 310 x 180 mm table height over floor 745 mm ram surface 520 x 245 mm ram adjustment 75 mm power requirement 5,5 kW weight 5,5 t dimensions (WxDxH) 1,1 x 2,4 x 2,4 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, back gears, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation Dcsdpfx Afsvuug Asljr can be inspected in running condition in our warehouse