Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total height: 4,600 mm, total width: 3,400 mm, total length: 1,900 mm, pressing force: 200 t, table width: 2,000 mm, table length: 1,000 mm, overall weight: 26,000 kg, die cushion stroke: 300 mm, with 60-ton draw cushion Herblitz feed: Max. material width: 550 mm Max. material thickness: 6 mm Pjdpfx Aajyv A Ipsaogi Siemens control SPS7, 1500F

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) Pgsdpfjk S Dt Tsx Aaaoi - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), pressing force: 16 t, Spindle Press Manufacturer: Neher Model: SPP-16/70 Weight: 650 kg Pressing force: 16,000 kg Max. stroke: 250 mm Column gap: 500 mm Podsyknf Ujpfx Aaaogi Table size: 780x400 mm Clamping plate dimensions: 480x300 mm For pressing in components or testing tools.

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication Pgsdpfxevuukus Aaasi control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: like new (used), Year of construction: 2023, overall weight: 1,050 kg, working width: 1,000 mm, pressing force: 100 t, stroke length: 400 mm, Equipment: emergency stop, – Year of manufacture: 2023 (lightly used) Psdpoyupu Ejfx Aaaogi – Capacity: 100 tons – Cylinder stroke: 400 mm – Working width: 1000 mm – 2 speeds – Pressure gauge – Emergency stop – 400V

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 400 mm, - Cylinder stroke 400 mm Pgsdpfxogp Dc Re Aaaoi - Working width 1010 mm - Cylinder is movable - Can be operated electrically or manually - Pressure indicator - Emergency stop - 400V

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? Pgodjfxyh Rjpfx Aaaji :1200 ?

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm Pgodpsyk D Dtsfx Aaaei SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: new, Year of construction: 2026, pressing force: 200 t, DHS-200 – 200 T Hydraulic Heated Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a DHS-200 hydraulic heated press with a pressing force of 200 T and an extendable sliding table system. The machine features heating plates measuring 800 × 800 mm, an open height of 800 mm, as well as a hydraulic stroke of 600 mm, making it particularly suitable for laminating, molding, and thermal press processes with temperature-controlled tooling. ==== Technical Details & Information: Hydraulic Heated Press DHS-200 – 200 T ==== General Specifications - Design: Hydraulic heated press with sliding table - Pressing force: 200 T - Table usable area: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm Psdpfxoyuvrdj Aaajgi - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (W×D×H): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg - Machine frame: welded steel construction ==== Hydraulic Cylinder - Piston stroke: 600 mm - Piston rod Ø: 380 mm - Cylinder Ø: 180 mm - Max. operating pressure: 260 bar ==== Hydraulic Power Unit - Return speed: 22 mm/s - Idle speed: 10 mm/s - Hydraulic pump: ASC - Pump capacity: 42 l - Motor power: 7.5 kW - Hydraulic power unit: mounted beside the press - Hydraulic manifold / valves: Duplomatic - Air cooling - Adjustable pressure - Manual limit sensors - Cam switch for stroke limitation - Passive pressure maintenance for up to 60 minutes ==== Heating System - Electrically heated steel plates - Heating capacity: 27 kW - Temperature range up to 250 °C - Temperature sensors: 2 per heating plate - Temperature fluctuation: approx. 5–10 °C ==== Controls - Two-hand operation - Ram return via control button - Stroke limitation via cam switch - Pressure adjustment via control valve - CE certificate and user manual included ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Heating elements per plate: 18 units - Total heating power: 27 kW - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 40 kW ===== Plastics processing, laminating processes, composite materials, rubber and elastomer processing, compression molding, thermal pressing processes, hot-pressing applications Hydraulic press, hydraulic heated press, heated press, sliding table press, 200 ton press, 200 T press, laminating press, plastics press, molding press, vulcanizing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machine directives, the European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they also fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competence is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Year of construction: 1994, condition: ready for operation (used), A hydraulic transfer molding press Lauffer is available. Press force: 125t, power: 15kW, hydraulic oil volume: 300l, machine dimensions X/Y/Z: approx. 2200mm/1400mm/3000mm, weight: approx. 6500kg. An on-site inspection is possible. Pjdpfx Aajyxgq Tsaogi

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Pjdpoyxgr Refx Aaaogi

Condition: used, Year of construction: 1993, pressure 630 KN distance between columns 800 mm stroke 150 mm table surface area 720x550 mm ram surface 720x520 mm dayligth 420 mm rapid drop speed 394 mm/sec working feed 71/17 mm/sec return speed 390 mm/sec Pgjdsyutwkepfx Aaaji adjustment movement of the stroke 120 mm total power requirement 15 kW Cutting impact dampening The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Podpfx Aaeyutvysaogi Your Markus Hirsch Team

Condition: used, Year of construction: 1971, pressure 40 t stroke . mm no. of strokes . Hub/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Pgjdpfx Aeyutuioaaoi

Condition: used, Year of construction: 1971, pressure 100 t passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec Podpoyuttrjfx Aaaegi The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, total height: 2,700 mm, pressing force: 25 t, table width: 500 mm, table length: 500 mm, overall weight: 2,000 kg, distance table to ram: 800 mm, stroke length: 500 mm, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ram stroke: 500 mm Pjdpoxfzdlefx Aaasgi Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Documentation included

Condition: used, Year of construction: 1981, total height: 2,300 mm, total width: 1,100 mm, total length: 2,000 mm, Empty weight: 500 kg Price: On request - Year: 1981 - Documentation available: No - CE certificate present: No - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Pgedpfxoxhcgye Aaaei Lukas van Rossum

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Pedpfx Aajyvz U Ioajgi Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 1998, machine/vehicle number: 2 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Podoyvz Stjpfx Aaajgi Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 1989, total height: 2,900 mm, total width: 1,800 mm, total length: 2,000 mm, Empty weight: 5.600 kg Price: On request - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 122692 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 900 - Table width [mm]: 630 - Ram width [mm]: 360 - Throat depth [mm]: 140 - Height adjustment [mm]: 63 - Motor power: 7.0kW - Transport dimensions: 2000mm x 1800mm x 2900mm (l x w x h) Podpjw Hzvmofx Aaaogi - Transport weight [kg]: 5600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2025, condition: new, - Panel width 710 mm - Backgauge Pjdpfxsh Ramgs Aaaogi - Adjustable stroke

Condition: new, Year of construction: 2019, machine/vehicle number: DF0319, pressing force: 125 t, pressure:125 t passage width:1000 mm stroke:500 mm Weight of machine approx.:6 t Podpfx Aajfxykpoasgi dimensions:2540 x 933 x 3000 mm return capacity:12 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:600 x 1300 mm table plate:600 x 1300 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) Engine Output:11 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:250 l speed rapid traverse:10 mm/sec column diameter:120 mm

Condition: as good as new (ex-display), Year of construction: 2018, pressing force: 110 t, pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Psdpfefhcc Tsx Aaaogi Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

Condition: new, Year of construction: 2019, machine/vehicle number: DF0325, pressing force: 40 t, pressure:40 t passage width:1000 mm stroke:400 mm Weight of machine approx.:3,5 t dimensions:2065 x 700 x 2905 mm return capacity:4 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:1320 x 600 mm table plate:1320 x 600 mm table height over floor:750 mm Oil cooling (electric):1,5 kW (max) Engine Output:8 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Pgodpfjfxykwjx Aaaji Oil Tank Capacity:200 l speed rapid traverse:10 mm/sec column diameter:100 mm :2400 ? Maintenance Balcony:3600 ? :4600 ? Ground tub of lacquered steel:850

Condition: new, Year of construction: 2018, machine/vehicle number: DF0199 - Rev.00, pressing force: 160 t, pressure:160 t passage width:1200 mm stroke:600 mm Weight of machine approx.:7 t dimensions:ca. 2400 x 1400 x 3400 mm return capacity:16 t Max Working height:800 mm Return Speed:25 mm/sec pestle plate:1670 x 800 mm table plate:1670 x 800 mm table height over floor:800 mm Oil cooling (electric):1,5 kW (max) Engine Output:18 kW Podpfx Aajdxvfhsasgi speed of forward flow:10 mm/sec pressure speed:10 mm/sec Travel:600 mm Oil Tank Capacity:300 l