Condition: good (used), Year of construction: 2011, functionality: fully functional, Control: Siemens 840D Spindle bore: 65 mm Speed: 4,000 rpm Tool holder: VDI 30 Dsdpoy Rr U Uofx Anzokr Main and counter spindle with C axis TOOL CARRIER I (XZ) Technology: Cross slide (3x) Travel: X= 70, Z= 115 mm Tool Carrier II (X/Z) Turret with 7 stations and subspindle All stations driven (3,000 rpm) Travel: X= 160, Z= 450 mm Tool Carrier III Turret with 8 stations Travel: X= 150, Z= 200 mm Tool Carrier IV (rear side) Turret with 8 stations 3 tool holders for rear side EQUIPMENT - Chip conveyor - Bar feeder IEMCA MASTER 80/33 HF

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories Dkedpfxszru Uko Anzsr FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), The Colechester Bantem 1600 is a small compact lathe. It was mainly used in the educational sector providing training for its safe use to students. It was a well maintained machine, will little use and as a result has little or no backlash in its carriage's. It comes complete with 3 & 4 Jaw chucks, faceplates, and a set of gears for expanding the speed range of its spindle. It also has a range of tool holders and cutting tools. It has an integrated cabinet of the safe storage and easy access for its accessories. Dodpfx Anezmhmvjzskr This machine is a strong, sturdy and compact machine and is suitable for may applications.

Condition: used, Year of construction: 1989, functionality: unexamined, Star SR-20 type 530J sliding head CNC lathe Year (1989) with Fanuc Series 16-T control Parts conveyor (belt missing) Cromer swarf conveyor (1995) Donaldson Torit oil mist filter FMB Turbo 3-26 barfeed Dkodjzmamnspfx Anzsr

Condition: used, Year of construction: 2008, functionality: unexamined, Star SR-20R II sliding head CNC lathe Year (2008) Dedpfx Aszmalksnzjkr with Fanuc Series 18i-TB control Parts conveyor LNS Turbo HB swarf conveyor FMB Mini Mag 20 / 3200 barfeed 2 available

Condition: used, Year of construction: 2021, functionality: unexamined, Star SB-20R type G sliding head CNC lathe Year (2021) with Fanuc Series Oi-TF control Filtermist S400 oil mist filter Parts catcher & conveyor Dkodpfx Ajzmahrenzjr LNS Turbo HB swarf conveyor FMB Turbo 2-20 / 3200A barfeed 3 available - 2 manufactured in 2021 and 1 manufactured in 2015

Condition: used, Year of construction: 1999, functionality: unexamined, Daewoo Puma 200MC CNC lathe Year (1999) with Fanuc Series 18-T control, 12-station turret, live tooling, 6” chuck, tool setter, parts catcher Dedezmafwjpfx Anzjkr LNS Turbo HB swarf conveyor Serial no: 211174 (2012) LNS Quick Load servo barfeed

Condition: used, Year of construction: 1984, functionality: unexamined, Citizen Cincom F25 sliding head CNC lathe Year (1984) with Citizen Cincom control LNS Hydrobar Mini-Sprint bar feed Dkodpfx Anozmad Hjzer

Condition: used, Year of construction: 1984, functionality: unexamined, Citizen Cincom F20 sliding head CNC lathe Dkjdpfx Anezmadtezer Year (1984) with Citizen Cincom control and bar feed 2 available

Condition: used, Year of construction: 1970, Diameter of the table 3000 mm turning diameter Max. 5500 mm column travel 1000 mm table turning speeds 82 U/min table load max. 25 t turning height 2000 mm weight of the machine ca. 75 t Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Dkodpfxezhn Txo Anzer apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2009, These very good, used universal lathes come from a training center and are being sold due to restructuring. There are 3 identical lathes available. Center height: 180 mm Distance between centers: 1000 mm Swinging diameter over bed: 360 mm Swinging diameter over cross slide: 250 mm Bed width: 190 mm Spindle bore: 42 mm Spindle mounting according to DIN 55027: Size 5 Speed range, 16 steps: 33 – 2000 rpm Feeds, 13 longitudinal: 0.03 – 0.4 mm/rev Likewise, 13 cross: 0.01 – 0.13 mm/rev 27 metric threads: 0.2 – 7 mm 36 Whitworth threads: 4 – 72 threads/inch 18 module threads: 0.3 – 3.5 module Dsdpfjziuybox Anzskr 21 diametral pitch threads: 8 – 44 pitch Tailstock mounting: MK 3 Drive power: 2.25 / 3.75 kW Machine dimensions L x W x H: 2000 x 1000 x 1550 mm Weight: 1100 kg Accessories / Special features: • 3-axis digital display RSF • 3-jaw chuck, diameter 200 mm • Quick-change tool holder system “Multifix”, size B • Chuck guard, foldable, electrically secured • Large chip guard • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle turning machine with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 2 steady rests (small + large), and chip conveyor. Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height 350 mm Distance between centers 4000 mm Swinging diameter over bed 690 mm Swinging diameter over cross slide 450 mm Swinging diameter in the gap 870 mm Spindle speeds 0 – 2400 rpm Spindle bore 82 mm Spindle motor 15 / 22 kW Machine dimensions + chip conveyor L x W x H 7350 x 2450 x 2050 mm Machine weight 6,800 kg Accessories / Special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor o Graphical simulation of cycles Dkedjzfqdnepfx Anzer o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Hinged chip conveyor • 2 fixed steady rests (1 x small, 1 x large) • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), FANUC 31i-B control system Djdpfx Aneztdaxozekr C-axis on both spindles Milling drive on the upper turret Milling drive on the lower turret B-axis on the upper turret: +/- 91° Y-axis on the upper turret: +/- 40 mm Y-axis on the lower turret: +/- 32.5 mm Larger main spindle: A5 Bar diameter: 51 mm Larger counter spindle: A5 Bar diameter: 51 mm Polygon turning function Unloading with gripper hand on the upper turret Intelligent handwheel AME inclined bed filter system 10-70 bar

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Dsdsztdaropfx Anzokr Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Dsdpfxjztc U Uj Anzjkr Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm Dkedpfxoztc U Is Anzer adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 2,800 mm Turning height: 1,000 mm Load capacity: 16,000 kg Max. turning diameter, approx.: 2,800 mm Turning diameter - external, max.: 2,800 mm Spindle speed: 63 min-1 Travel of the cross slide: 620 mm Ram stroke - max.: 690 mm ► INCLUDED Dsdjztc Uzjpfx Anzekr Chip conveyor 4-position tool turret Hydraulic chuck: 2800 mm ► EQUIPMENT Tool holder CAPTO 6 Electric handwheel Retrofit in 2009 ► DESCRIPTION The machine is in very good condition and was used for hard turning of roller bearings. In 2009, the machine underwent a mechanical overhaul by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Dkedpfxoztc Uno Anzor Machining diameter: 4,000 mm Machining height: 1,400 mm Travel distance of rotary table: 850 mm Max. turning diameter, approx.: 4,200 mm Turning diameter – external, max.: 4,000 mm Travel distance of cross slide: 850 mm Ram stroke – max.: 950 mm ► EQUIPMENT - Hydraulic chuck - Tool holder CAPTO 6 - Electric handwheel - Retrofit in 2007 ► INCLUDED Chip conveyor 4-position tool turret ► DESCRIPTION The machine is in very good condition and was used for hard turning of 4m cylindrical roller bearings. In 2007, the machine underwent mechanical overhaul by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Dedpfx Ajzhaqvenzekr Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8

Condition: used, Year of construction: 2019, Lathes Travel distance X: 305 mm Travel distance Y :105 mm Travel distance Z: 0 mm turning length: 1050 mm Dedpfxeztbu To Anzekr max. turning diameter: 900 mm max. circulation diameter: 650 mm spindle boring: 117 mm input Power: 30 kW max. turning moment: 1750 NM range of revolutions till: 2800 rpm Control: Fanuc 31i powered tools Powered tools: 12 control Fanuc Scrapper chip conveyor Y-axis C-axis BMT75 turret Tailstock Hydraulic chuck

Condition: excellent (used), Year of construction: 1981, Dorries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2: 5.100 - Max. turning height : 2.650 - Stroke Tool holder : 1.250 - Crossrailadjustment : 1.500 - Table load : 60.000 Dksdpfxskwcpxj Anzer - Tool shank size : 40 x 40 - Max. cutting power : 75000 - Max. torque on table : 60000 - Power main motor : 75 kW / 415 - Speeds 1 / 2 / 3 Range: 0,8 – 100 - Feeds Vario : 0,1 – 1.000 - Rapid Feed : 6.000 - Dimensions: 9,30 X 6,10 X 6,30 X 60 - CNC Siemens Sinumriek System 8 - Tool changer 16 positions - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways - Displaceable table hydraulic / manuel - Circular interpolation Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: excellent (used), Year of construction: 2008, turning length 1000 mm Djdpfx Anezqggijzskr turning diameter 420 mm swing diameter over bed slide 250 mm turning dia. in gap 580 mm spindle bore 58.0 mm turning speeds 20 - 2000 U/min bed width 300 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 130 mm total power requirement 6.0 kW weight of the machine ca. 1550 kg range L-W-H 2200 x 1050 x 1550 mm From a workshop for people with disabilities Current new price: approx. 12.000 euros Special price available upon request The LZ-20-10 S universal lathe is suitable for light and medium-duty turning operations. Even the basic configuration includes all essential accessories. To reduce production times, this model comes standard with a 3-axis digital readout. Features: - RSF digital readout - Model "Z735" - RÖHM 3-jaw chuck Ø 250 mm, with replacement jaws - RÖHM face chuck Ø 250 mm - Fixed tailstock - Coolant system - MULTI FIX tool holder with 2 inserts * currently not installed - Fold-down guard for tool holder - Fold-down guard on the turning chuck - Adjustable bed stop - Rotating center point - Tailstock incl. quick-release drill chuck - Foot pedal with brake function per CE standards - Swiveling machine light - 6x machine vibration-damping feet - Chip guard

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Dkedpozpwwpefx Anzjr Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, turning diameter over cross slide: 660 mm, turning length: 3,000 mm, spindle bore: 82 mm, spindle speed (max.): 1,500 rpm, spindle motor power: 11,000 W, total height: 1,500 mm, total length: 4,700 mm, total width: 625 mm, Centre lathe CONTUR SAEILO - SJ-600L MACH-ID 9759 Make: CONTUR SAEILO Type: SJ-600L Year: 2015 3 chuck schunk 315 mm 4 chuck schunk 400 mm Multi fix tool system with inserts Digital reafdout system Steady rest  DBC Turning Length: 3000mm Swing over bed Ø: 660mm Swing over cross slide Ø:438mm Spindle bore: 82mm Dsdpfezpwplsx Anzekr Spindle power: 11kW Bed width: 400mm Tailstock spindle Ø: 85Ø Stroke pinole: 165mm Spindle taper: 5Mk Speeds / ranges: 1500Rpm Length: 4700mm Width: 625mm Height: 1500mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1997, spindle bore: 62 mm, turning diameter over bed slide: 440 mm, turning diameter over top slide: 230 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 700 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, Centre lathe ZMM Sliven - CU 400 MACH-ID 9758 Make: ZMM Sliven Type: CU 400 Year: 1997 DBC Turning Length: 2000mm Swing over bed Ø: 440mm Swing over cross slide Ø:230mm Swing in the gap Ø: 620mm Spindle bore: 62mm Spindle power: 8kW Bed width: 360mm Tailstock spindle Ø: 70Ø Stroke pinole: 180mm Spindle taper: 5Mk Speeds / ranges: 2000Rpm Dkodpfx Aezpwixenzsr Length: 3500mm Width: 700mm Height: 1500mm Weight: 2600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!